Message ID | 20231113185852.3579970-3-harshit.m.mogalapalli@oracle.com (mailing list archive) |
---|---|
State | Superseded, archived |
Headers | show |
Series | [v3,1/4] platform/x86: hp-bioscfg: Simplify return check in hp_add_other_attributes() | expand |
On Mon, 13 Nov 2023, Harshit Mogalapalli wrote: > 'attr_name_kobj' is allocated using kzalloc, but on all the error paths we > don't free it, hence we have a memory leak. Fix it by adding kfree(). Don't use "we". This is still somewhat confusing... I think it would be better with these two amendments. Fix the error path before kobject_init_and_add() by adding kfree(). > kobject_put() must be always called after passing the object to > kobject_init_and_add(). Only the error path which is immediately next > to kobject_init_and_add() calls kobject_put() and not any other error > path after it. > > Fix the error handling by moving the kobject_put() into the goto label Fix the error handling after kobject_init_and_add() by moving ... > err_other_attr_init that is already used by all the error paths after > kobject_init_and_add(). > > Fixes: a34fc329b189 ("platform/x86: hp-bioscfg: bioscfg") > Reported-by: kernel test robot <lkp@intel.com> > Reported-by: Dan Carpenter <error27@gmail.com> > Closes: https://lore.kernel.org/r/202309201412.on0VXJGo-lkp@intel.com/ > Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> > --- > This is based on static analysis, only compile tested. > > v2->v3: Improve commit message as suggested by Iplo on v2. > https://lore.kernel.org/all/1b58df2d-b444-ddb7-7533-9911d35f8f7@linux.intel.com/ > --- > drivers/platform/x86/hp/hp-bioscfg/bioscfg.c | 6 ++++-- > 1 file changed, 4 insertions(+), 2 deletions(-) > > diff --git a/drivers/platform/x86/hp/hp-bioscfg/bioscfg.c b/drivers/platform/x86/hp/hp-bioscfg/bioscfg.c > index a3599498c4e8..6ddca857cc4d 100644 > --- a/drivers/platform/x86/hp/hp-bioscfg/bioscfg.c > +++ b/drivers/platform/x86/hp/hp-bioscfg/bioscfg.c > @@ -575,77 +575,79 @@ static void release_attributes_data(void) > /** > * hp_add_other_attributes() - Initialize HP custom attributes not > * reported by BIOS and required to support Secure Platform and Sure > * Start. > * > * @attr_type: Custom HP attribute not reported by BIOS > * > * Initialize all 2 types of attributes: Platform and Sure Start > * object. Populates each attribute types respective properties > * under sysfs files. > * > * Returns zero(0) if successful. Otherwise, a negative value. > */ > static int hp_add_other_attributes(int attr_type) > { > struct kobject *attr_name_kobj; > union acpi_object *obj = NULL; > int ret; > char *attr_name; > > attr_name_kobj = kzalloc(sizeof(*attr_name_kobj), GFP_KERNEL); > if (!attr_name_kobj) > return -ENOMEM; > > mutex_lock(&bioscfg_drv.mutex); > > /* Check if attribute type is supported */ > switch (attr_type) { > case HPWMI_SECURE_PLATFORM_TYPE: > attr_name_kobj->kset = bioscfg_drv.authentication_dir_kset; > attr_name = SPM_STR; > break; > > case HPWMI_SURE_START_TYPE: > attr_name_kobj->kset = bioscfg_drv.main_dir_kset; > attr_name = SURE_START_STR; > break; > > default: > pr_err("Error: Unknown attr_type: %d\n", attr_type); > ret = -EINVAL; > - goto err_other_attr_init; > + kfree(attr_name_kobj); > + goto unlock_drv_mutex; > } > > ret = kobject_init_and_add(attr_name_kobj, &attr_name_ktype, > NULL, "%s", attr_name); > if (ret) { > pr_err("Error encountered [%d]\n", ret); > - kobject_put(attr_name_kobj); > goto err_other_attr_init; > } > > /* Populate attribute data */ > switch (attr_type) { > case HPWMI_SECURE_PLATFORM_TYPE: > ret = hp_populate_secure_platform_data(attr_name_kobj); > break; > > case HPWMI_SURE_START_TYPE: > ret = hp_populate_sure_start_data(attr_name_kobj); > break; > > default: > ret = -EINVAL; > } > > if (ret) > goto err_other_attr_init; > > mutex_unlock(&bioscfg_drv.mutex); > return 0; > > err_other_attr_init: > + kobject_put(attr_name_kobj); > +unlock_drv_mutex: > mutex_unlock(&bioscfg_drv.mutex); > kfree(obj); > return ret; > } >
diff --git a/drivers/platform/x86/hp/hp-bioscfg/bioscfg.c b/drivers/platform/x86/hp/hp-bioscfg/bioscfg.c index a3599498c4e8..6ddca857cc4d 100644 --- a/drivers/platform/x86/hp/hp-bioscfg/bioscfg.c +++ b/drivers/platform/x86/hp/hp-bioscfg/bioscfg.c @@ -575,77 +575,79 @@ static void release_attributes_data(void) /** * hp_add_other_attributes() - Initialize HP custom attributes not * reported by BIOS and required to support Secure Platform and Sure * Start. * * @attr_type: Custom HP attribute not reported by BIOS * * Initialize all 2 types of attributes: Platform and Sure Start * object. Populates each attribute types respective properties * under sysfs files. * * Returns zero(0) if successful. Otherwise, a negative value. */ static int hp_add_other_attributes(int attr_type) { struct kobject *attr_name_kobj; union acpi_object *obj = NULL; int ret; char *attr_name; attr_name_kobj = kzalloc(sizeof(*attr_name_kobj), GFP_KERNEL); if (!attr_name_kobj) return -ENOMEM; mutex_lock(&bioscfg_drv.mutex); /* Check if attribute type is supported */ switch (attr_type) { case HPWMI_SECURE_PLATFORM_TYPE: attr_name_kobj->kset = bioscfg_drv.authentication_dir_kset; attr_name = SPM_STR; break; case HPWMI_SURE_START_TYPE: attr_name_kobj->kset = bioscfg_drv.main_dir_kset; attr_name = SURE_START_STR; break; default: pr_err("Error: Unknown attr_type: %d\n", attr_type); ret = -EINVAL; - goto err_other_attr_init; + kfree(attr_name_kobj); + goto unlock_drv_mutex; } ret = kobject_init_and_add(attr_name_kobj, &attr_name_ktype, NULL, "%s", attr_name); if (ret) { pr_err("Error encountered [%d]\n", ret); - kobject_put(attr_name_kobj); goto err_other_attr_init; } /* Populate attribute data */ switch (attr_type) { case HPWMI_SECURE_PLATFORM_TYPE: ret = hp_populate_secure_platform_data(attr_name_kobj); break; case HPWMI_SURE_START_TYPE: ret = hp_populate_sure_start_data(attr_name_kobj); break; default: ret = -EINVAL; } if (ret) goto err_other_attr_init; mutex_unlock(&bioscfg_drv.mutex); return 0; err_other_attr_init: + kobject_put(attr_name_kobj); +unlock_drv_mutex: mutex_unlock(&bioscfg_drv.mutex); kfree(obj); return ret; }
'attr_name_kobj' is allocated using kzalloc, but on all the error paths we don't free it, hence we have a memory leak. Fix it by adding kfree(). kobject_put() must be always called after passing the object to kobject_init_and_add(). Only the error path which is immediately next to kobject_init_and_add() calls kobject_put() and not any other error path after it. Fix the error handling by moving the kobject_put() into the goto label err_other_attr_init that is already used by all the error paths after kobject_init_and_add(). Fixes: a34fc329b189 ("platform/x86: hp-bioscfg: bioscfg") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <error27@gmail.com> Closes: https://lore.kernel.org/r/202309201412.on0VXJGo-lkp@intel.com/ Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> --- This is based on static analysis, only compile tested. v2->v3: Improve commit message as suggested by Iplo on v2. https://lore.kernel.org/all/1b58df2d-b444-ddb7-7533-9911d35f8f7@linux.intel.com/ --- drivers/platform/x86/hp/hp-bioscfg/bioscfg.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)