From patchwork Sat May 11 02:36:52 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Lyndon Sanche X-Patchwork-Id: 13662232 Received: from wfout1-smtp.messagingengine.com (wfout1-smtp.messagingengine.com [64.147.123.144]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 3023E200AE; Sat, 11 May 2024 02:39:51 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=64.147.123.144 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1715395194; cv=none; b=hOWNaD4KAm33mD9GgImZ6nmpM4wd+zPL67DNXMTe8vbYT8HwW/p+VEWW3AWNYNj1msYSe9zs2iM7dgWGs4tEc9c8V3pqoACQUY/AL3phCdlGzSEW4YAapfKNPS1GnKQFdeyy9R/vgDVEFlaLdoTsDPJ1Aqqt8PEWDPDBdFYGaMo= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1715395194; c=relaxed/simple; bh=H+8BbCpNbxtMxSSBJR0GajqPdSX3Kcjk73MXAr/xWNs=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=lYVwaAnmagL+hCmFjLyTk+B5rzcGKz42rc1y6XgmWmNQ+/7E4IBhyIYt8LjE1z79Zcp17JH7dy3byl2kWsHPOo7Joe7r9X7OEEgnOS3zSbT11Nxyr3wIois71E/wMxjzAd0ii7KlAukHzUHFl1Whs4vXgttxuMAeA/L8eLMNw7Y= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=lyndeno.ca; spf=pass smtp.mailfrom=lyndeno.ca; dkim=pass (2048-bit key) header.d=lyndeno.ca header.i=@lyndeno.ca header.b=xX8Aui39; dkim=pass (2048-bit key) header.d=messagingengine.com header.i=@messagingengine.com header.b=EH49xg/J; arc=none smtp.client-ip=64.147.123.144 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=lyndeno.ca Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=lyndeno.ca Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=lyndeno.ca header.i=@lyndeno.ca header.b="xX8Aui39"; dkim=pass (2048-bit key) header.d=messagingengine.com header.i=@messagingengine.com header.b="EH49xg/J" Received: from compute1.internal (compute1.nyi.internal [10.202.2.41]) by mailfout.west.internal (Postfix) with ESMTP id 4BA731C000E0; Fri, 10 May 2024 22:39:50 -0400 (EDT) Received: from mailfrontend1 ([10.202.2.162]) by compute1.internal (MEProxy); Fri, 10 May 2024 22:39:51 -0400 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=lyndeno.ca; h=cc :cc:content-transfer-encoding:content-type:date:date:from:from :in-reply-to:in-reply-to:message-id:mime-version:references :reply-to:subject:subject:to:to; s=fm2; t=1715395189; x= 1715481589; bh=Tl0VzhlEWbW8rzN7D7pDeLzEcnGC8nVWp7qMRoliyq0=; b=x X8Aui39ZzMocIxAhp0BWZpTnk3kwSg6Vsb41F/AwiMw1cv3dbINik6QiRaWphF0i MlxEUYMwHeQ4A5kQYvXSvimzVjvLmfX22uKMIo2MpqmkWoF932J+PFlConOvvbNc fd8nv2YcgLRSJvKXfiDQFKiLArWfdCLAwN6drFFkjB84Qyt1hmyqIkj59tZlfUgy 9wi5tXLkYJm5eWDBqegFly/QeBx2KppqgNzN6VPDazvejMTODoLH46ZIJoC3ogqb F49ik89qf6qVpCd7a0KACAoMVwb53Cy/V47wyiFUttve91GZBXFN+URsoVQffNUs nnswDT+s3HIxJ5wEOGL9w== DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d= messagingengine.com; h=cc:cc:content-transfer-encoding :content-type:date:date:feedback-id:feedback-id:from:from :in-reply-to:in-reply-to:message-id:mime-version:references :reply-to:subject:subject:to:to:x-me-proxy:x-me-proxy :x-me-sender:x-me-sender:x-sasl-enc; s=fm3; t=1715395189; x= 1715481589; bh=Tl0VzhlEWbW8rzN7D7pDeLzEcnGC8nVWp7qMRoliyq0=; b=E H49xg/JKmPuH3JYDO5TuDBZL0PGmBWL4E9DUEWN/3LxRbQb5qEYOK8cQa561LwUd U83grPhT4cRd6WDL41bmG8TRhWuWf9Xt2Wu6g+rtDhn670er2OlBRzzfGVs+KfOI Clxfh90R41C5ihSxb/wvj3dBAsP9GGHzUFYrLsFJbkn0NxU69KrTa/B3EOqVm6++ L6BB7vulp7GagX0V0JrRyEC1X5rg5DHBuBOueoF5Igi2GUwOodcPpilMr5qTenrw 9D294OfN4YQR4N6CTwUHlWWR3SwXQvJ/Rsf608OuFmkv/n/a669ppCu1LZkw0Q3H cPMl66CGbk0CXzbClnfwA== X-ME-Sender: X-ME-Received: X-ME-Proxy-Cause: gggruggvucftvghtrhhoucdtuddrgedvledrvdefledgiedtucetufdoteggodetrfdotf fvucfrrhhofhhilhgvmecuhfgrshhtofgrihhlpdfqfgfvpdfurfetoffkrfgpnffqhgen uceurghilhhouhhtmecufedttdenucesvcftvggtihhpihgvnhhtshculddquddttddmne goteeftdduqddtudculdduhedmnecujfgurhephffvvefufffkofgjfhgggfestdekredt redttdenucfhrhhomhepnfihnhguohhnucfurghntghhvgcuoehlshgrnhgthhgvsehlhi hnuggvnhhordgtrgeqnecuggftrfgrthhtvghrnheplefhieffkedtledugfetgfegfeeh hfethffhffeuvefhtdekvdeikeehleejieetnecuvehluhhsthgvrhfuihiivgeptdenuc frrghrrghmpehmrghilhhfrhhomheplhhsrghntghhvgeslhihnhguvghnohdrtggr X-ME-Proxy: Feedback-ID: i1719461a:Fastmail Received: by mail.messagingengine.com (Postfix) with ESMTPA; Fri, 10 May 2024 22:39:49 -0400 (EDT) From: Lyndon Sanche To: lsanche@lyndeno.ca Cc: mario.limonciello@amd.com, pali@kernel.org, W_Armin@gmx.de, srinivas.pandruvada@linux.intel.com, ilpo.jarvinen@linux.intel.com, lkp@intel.com, hdegoede@redhat.com, Yijun.Shen@dell.com, Matthew Garrett , Heiner Kallweit , Randy Dunlap , Jonathan Corbet , Vegard Nossum , platform-driver-x86@vger.kernel.org, linux-kernel@vger.kernel.org, Dell.Client.Kernel@dell.com Subject: [PATCH v6 2/2] platform/x86: dell-laptop: Implement platform_profile Date: Fri, 10 May 2024 20:36:52 -0600 Message-ID: <20240511023726.7408-4-lsanche@lyndeno.ca> X-Mailer: git-send-email 2.42.0 In-Reply-To: <20240425172758.67831-1-lsanche@lyndeno.ca> References: <20240425172758.67831-1-lsanche@lyndeno.ca> Precedence: bulk X-Mailing-List: platform-driver-x86@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Some Dell laptops support configuration of preset fan modes through smbios tables. If the platform supports these fan modes, set up platform_profile to change these modes. If not supported, skip enabling platform_profile. Signed-off-by: Lyndon Sanche --- drivers/platform/x86/dell/Kconfig | 2 + drivers/platform/x86/dell/dell-laptop.c | 242 +++++++++++++++++++ drivers/platform/x86/dell/dell-smbios-base.c | 1 + drivers/platform/x86/dell/dell-smbios.h | 1 + 4 files changed, 246 insertions(+) diff --git a/drivers/platform/x86/dell/Kconfig b/drivers/platform/x86/dell/Kconfig index bd9f445974cc..26679f22733c 100644 --- a/drivers/platform/x86/dell/Kconfig +++ b/drivers/platform/x86/dell/Kconfig @@ -47,6 +47,7 @@ config DCDBAS config DELL_LAPTOP tristate "Dell Laptop Extras" default m + depends on ACPI depends on DMI depends on BACKLIGHT_CLASS_DEVICE depends on ACPI_VIDEO || ACPI_VIDEO = n @@ -57,6 +58,7 @@ config DELL_LAPTOP select POWER_SUPPLY select LEDS_CLASS select NEW_LEDS + select ACPI_PLATFORM_PROFILE help This driver adds support for rfkill and backlight control to Dell laptops (except for some models covered by the Compal driver). diff --git a/drivers/platform/x86/dell/dell-laptop.c b/drivers/platform/x86/dell/dell-laptop.c index 42f7de2b4522..07f54f1cbac5 100644 --- a/drivers/platform/x86/dell/dell-laptop.c +++ b/drivers/platform/x86/dell/dell-laptop.c @@ -27,6 +27,9 @@ #include #include #include +#include +#include +#include #include #include "dell-rbtn.h" #include "dell-smbios.h" @@ -95,6 +98,7 @@ static struct backlight_device *dell_backlight_device; static struct rfkill *wifi_rfkill; static struct rfkill *bluetooth_rfkill; static struct rfkill *wwan_rfkill; +static struct platform_profile_handler *thermal_handler; static bool force_rfkill; static bool micmute_led_registered; static bool mute_led_registered; @@ -2199,6 +2203,236 @@ static int mute_led_set(struct led_classdev *led_cdev, return 0; } +/* Derived from smbios-thermal-ctl + * + * cbClass 17 + * cbSelect 19 + * User Selectable Thermal Tables(USTT) + * cbArg1 determines the function to be performed + * cbArg1 0x0 = Get Thermal Information + * cbRES1 Standard return codes (0, -1, -2) + * cbRES2, byte 0 Bitmap of supported thermal modes. A mode is supported if + * its bit is set to 1 + * Bit 0 Balanced + * Bit 1 Cool Bottom + * Bit 2 Quiet + * Bit 3 Performance + * cbRES2, byte 1 Bitmap of supported Active Acoustic Controller (AAC) modes. + * Each mode corresponds to the supported thermal modes in + * byte 0. A mode is supported if its bit is set to 1. + * Bit 0 AAC (Balanced) + * Bit 1 AAC (Cool Bottom + * Bit 2 AAC (Quiet) + * Bit 3 AAC (Performance) + * cbRes3, byte 0 Current Thermal Mode + * Bit 0 Balanced + * Bit 1 Cool Bottom + * Bit 2 Quiet + * Bit 3 Performanc + * cbRes3, byte 1 AAC Configuration type + * 0 Global (AAC enable/disable applies to all supported USTT modes) + * 1 USTT mode specific + * cbRes3, byte 2 Current Active Acoustic Controller (AAC) Mode + * If AAC Configuration Type is Global, + * 0 AAC mode disabled + * 1 AAC mode enabled + * If AAC Configuration Type is USTT mode specific (multiple bits may be set), + * Bit 0 AAC (Balanced) + * Bit 1 AAC (Cool Bottom + * Bit 2 AAC (Quiet) + * Bit 3 AAC (Performance) + * cbRes3, byte 3 Current Fan Failure Mode + * Bit 0 Minimal Fan Failure (at least one fan has failed, one fan working) + * Bit 1 Catastrophic Fan Failure (all fans have failed) + * + * cbArg1 0x1 (Set Thermal Information), both desired thermal mode and + * desired AAC mode shall be applied + * cbArg2, byte 0 Desired Thermal Mode to set + * (only one bit may be set for this parameter) + * Bit 0 Balanced + * Bit 1 Cool Bottom + * Bit 2 Quiet + * Bit 3 Performance + * cbArg2, byte 1 Desired Active Acoustic Controller (AAC) Mode to set + * If AAC Configuration Type is Global, + * 0 AAC mode disabled + * 1 AAC mode enabled + * If AAC Configuration Type is USTT mode specific + * (multiple bits may be set for this parameter), + * Bit 0 AAC (Balanced) + * Bit 1 AAC (Cool Bottom + * Bit 2 AAC (Quiet) + * Bit 3 AAC (Performance) + */ + +#define DELL_ACC_GET_FIELD GENMASK(19, 16) +#define DELL_ACC_SET_FIELD GENMASK(11, 8) +#define DELL_THERMAL_SUPPORTED GENMASK(3, 0) + +enum thermal_mode_bits { + DELL_BALANCED = BIT(0), + DELL_COOL_BOTTOM = BIT(1), + DELL_QUIET = BIT(2), + DELL_PERFORMANCE = BIT(3), +}; + +static int thermal_get_mode(void) +{ + struct calling_interface_buffer buffer; + int state; + int ret; + + dell_fill_request(&buffer, 0x0, 0, 0, 0); + ret = dell_send_request(&buffer, CLASS_INFO, SELECT_THERMAL_MANAGEMENT); + if (ret) + return ret; + state = buffer.output[2]; + if (state & DELL_BALANCED) + return DELL_BALANCED; + else if (state & DELL_COOL_BOTTOM) + return DELL_COOL_BOTTOM; + else if (state & DELL_QUIET) + return DELL_QUIET; + else if (state & DELL_PERFORMANCE) + return DELL_PERFORMANCE; + else + return -ENXIO; +} + +static int thermal_get_supported_modes(int *supported_bits) +{ + struct calling_interface_buffer buffer; + int ret; + + dell_fill_request(&buffer, 0x0, 0, 0, 0); + ret = dell_send_request(&buffer, CLASS_INFO, SELECT_THERMAL_MANAGEMENT); + if (ret) + return ret; + *supported_bits = FIELD_GET(DELL_THERMAL_SUPPORTED, buffer.output[1]); + return 0; +} + +static int thermal_get_acc_mode(int *acc_mode) +{ + struct calling_interface_buffer buffer; + int ret; + + dell_fill_request(&buffer, 0x0, 0, 0, 0); + ret = dell_send_request(&buffer, CLASS_INFO, SELECT_THERMAL_MANAGEMENT); + if (ret) + return ret; + *acc_mode = FIELD_GET(DELL_ACC_GET_FIELD, buffer.output[3]); + return 0; +} + +static int thermal_set_mode(enum thermal_mode_bits state) +{ + struct calling_interface_buffer buffer; + int ret; + int acc_mode; + + ret = thermal_get_acc_mode(&acc_mode); + if (ret) + return ret; + + dell_fill_request(&buffer, 0x1, FIELD_PREP(DELL_ACC_SET_FIELD, acc_mode) | state, 0, 0); + ret = dell_send_request(&buffer, CLASS_INFO, SELECT_THERMAL_MANAGEMENT); + return ret; +} + +static int thermal_platform_profile_set(struct platform_profile_handler *pprof, + enum platform_profile_option profile) +{ + switch (profile) { + case PLATFORM_PROFILE_BALANCED: + return thermal_set_mode(DELL_BALANCED); + case PLATFORM_PROFILE_PERFORMANCE: + return thermal_set_mode(DELL_PERFORMANCE); + case PLATFORM_PROFILE_QUIET: + return thermal_set_mode(DELL_QUIET); + case PLATFORM_PROFILE_COOL: + return thermal_set_mode(DELL_COOL_BOTTOM); + default: + return -EOPNOTSUPP; + } +} + +static int thermal_platform_profile_get(struct platform_profile_handler *pprof, + enum platform_profile_option *profile) +{ + int ret; + + ret = thermal_get_mode(); + if (ret < 0) + return ret; + + switch (ret) { + case DELL_BALANCED: + *profile = PLATFORM_PROFILE_BALANCED; + break; + case DELL_PERFORMANCE: + *profile = PLATFORM_PROFILE_PERFORMANCE; + break; + case DELL_COOL_BOTTOM: + *profile = PLATFORM_PROFILE_COOL; + break; + case DELL_QUIET: + *profile = PLATFORM_PROFILE_QUIET; + break; + default: + return -EINVAL; + } + + return 0; +} + +static int thermal_init(void) +{ + int ret; + int supported_modes; + + /* If thermal commands not supported, exit without error */ + if (!dell_laptop_check_supported_cmds(CLASS_INFO)) + return 0; + + /* If thermal modes not supported, exit without error */ + ret = thermal_get_supported_modes(&supported_modes); + if (ret < 0) + return ret; + if (!supported_modes) + return 0; + + thermal_handler = kzalloc(sizeof(*thermal_handler), GFP_KERNEL); + if (!thermal_handler) + return -ENOMEM; + thermal_handler->profile_get = thermal_platform_profile_get; + thermal_handler->profile_set = thermal_platform_profile_set; + + if (supported_modes & DELL_QUIET) + set_bit(PLATFORM_PROFILE_QUIET, thermal_handler->choices); + if (supported_modes & DELL_COOL_BOTTOM) + set_bit(PLATFORM_PROFILE_COOL, thermal_handler->choices); + if (supported_modes & DELL_BALANCED) + set_bit(PLATFORM_PROFILE_BALANCED, thermal_handler->choices); + if (supported_modes & DELL_PERFORMANCE) + set_bit(PLATFORM_PROFILE_PERFORMANCE, thermal_handler->choices); + + /* Clean up if failed */ + ret = platform_profile_register(thermal_handler); + if (ret) + kfree(thermal_handler); + + return ret; +} + +static void thermal_cleanup(void) +{ + if (thermal_handler) { + platform_profile_remove(); + kfree(thermal_handler); + } +} + static struct led_classdev mute_led_cdev = { .name = "platform::mute", .max_brightness = 1, @@ -2238,6 +2472,11 @@ static int __init dell_init(void) goto fail_rfkill; } + /* Do not fail module if thermal modes not supported, just skip */ + ret = thermal_init(); + if (ret) + goto fail_thermal; + if (quirks && quirks->touchpad_led) touchpad_led_init(&platform_device->dev); @@ -2317,6 +2556,8 @@ static int __init dell_init(void) led_classdev_unregister(&mute_led_cdev); fail_led: dell_cleanup_rfkill(); +fail_thermal: + thermal_cleanup(); fail_rfkill: platform_device_del(platform_device); fail_platform_device2: @@ -2344,6 +2585,7 @@ static void __exit dell_exit(void) platform_device_unregister(platform_device); platform_driver_unregister(&platform_driver); } + thermal_cleanup(); } /* dell-rbtn.c driver export functions which will not work correctly (and could diff --git a/drivers/platform/x86/dell/dell-smbios-base.c b/drivers/platform/x86/dell/dell-smbios-base.c index 6ae09d7f76fb..387fa5618f7a 100644 --- a/drivers/platform/x86/dell/dell-smbios-base.c +++ b/drivers/platform/x86/dell/dell-smbios-base.c @@ -71,6 +71,7 @@ static struct smbios_call call_blacklist[] = { /* handled by kernel: dell-laptop */ {0x0000, CLASS_INFO, SELECT_RFKILL}, {0x0000, CLASS_KBD_BACKLIGHT, SELECT_KBD_BACKLIGHT}, + {0x0000, CLASS_INFO, SELECT_THERMAL_MANAGEMENT}, }; struct token_range { diff --git a/drivers/platform/x86/dell/dell-smbios.h b/drivers/platform/x86/dell/dell-smbios.h index 63116671eada..5d7178df80c6 100644 --- a/drivers/platform/x86/dell/dell-smbios.h +++ b/drivers/platform/x86/dell/dell-smbios.h @@ -19,6 +19,7 @@ /* Classes and selects used only in kernel drivers */ #define CLASS_KBD_BACKLIGHT 4 #define SELECT_KBD_BACKLIGHT 11 +#define SELECT_THERMAL_MANAGEMENT 19 /* Tokens used in kernel drivers, any of these * should be filtered from userspace access