diff mbox series

[net-next,v2,02/10] net: ethernet: Convert using devm_clk_get_enabled() in emac_probe()

Message ID 20240907031926.3591353-3-lizetao1@huawei.com (mailing list archive)
State Not Applicable, archived
Headers show
Series net: Convert using devm_clk_get_enabled()/devm_clk_get_optional_enabled() | expand

Commit Message

Li Zetao Sept. 7, 2024, 3:19 a.m. UTC
Use devm_clk_get_enabled() instead of devm_clk_get() +
clk_prepare_enable(), which can make the clk consistent with the device
life cycle and reduce the risk of unreleased clk resources. Since the
device framework has automatically released the clk resource, there is
no need to execute clk_disable_unprepare(clk) on the error path, drop
the out_clk_disable_unprepare label, and the original error process can
changed to the out_dispose_mapping error path.

Signed-off-by: Li Zetao <lizetao1@huawei.com>
---
 drivers/net/ethernet/allwinner/sun4i-emac.c | 13 ++-----------
 1 file changed, 2 insertions(+), 11 deletions(-)

Comments

Christophe JAILLET Sept. 7, 2024, 5:34 a.m. UTC | #1
Le 07/09/2024 à 05:19, Li Zetao a écrit :
> Use devm_clk_get_enabled() instead of devm_clk_get() +
> clk_prepare_enable(), which can make the clk consistent with the device
> life cycle and reduce the risk of unreleased clk resources. Since the
> device framework has automatically released the clk resource, there is
> no need to execute clk_disable_unprepare(clk) on the error path, drop
> the out_clk_disable_unprepare label, and the original error process can
> changed to the out_dispose_mapping error path.
> 
> Signed-off-by: Li Zetao <lizetao1@huawei.com>

Hi,

I think that the subject should be "net: ethernet: allwinner:", or maybe 
even "net: allwinner:"


clk can now be removed from struct emac_board_info I think.
You should check for all patches, as asked in [1].

I've not looked all patches, but lantiq_xrx200() looks also a good 
candidate for removing clk from a structure.

CJ

[1]: https://lore.kernel.org/all/20240903151649.1b466145@kernel.org/

CJ

> ---
>   drivers/net/ethernet/allwinner/sun4i-emac.c | 13 ++-----------
>   1 file changed, 2 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/net/ethernet/allwinner/sun4i-emac.c b/drivers/net/ethernet/allwinner/sun4i-emac.c
> index d761c08fe5c1..8f42501729b7 100644
> --- a/drivers/net/ethernet/allwinner/sun4i-emac.c
> +++ b/drivers/net/ethernet/allwinner/sun4i-emac.c
> @@ -1005,22 +1005,16 @@ static int emac_probe(struct platform_device *pdev)
>   	if (emac_configure_dma(db))
>   		netdev_info(ndev, "configure dma failed. disable dma.\n");
>   
> -	db->clk = devm_clk_get(&pdev->dev, NULL);
> +	db->clk = devm_clk_get_enabled(&pdev->dev, NULL);
>   	if (IS_ERR(db->clk)) {
>   		ret = PTR_ERR(db->clk);
>   		goto out_dispose_mapping;
>   	}
>   
> -	ret = clk_prepare_enable(db->clk);
> -	if (ret) {
> -		dev_err(&pdev->dev, "Error couldn't enable clock (%d)\n", ret);
> -		goto out_dispose_mapping;
> -	}
> -
>   	ret = sunxi_sram_claim(&pdev->dev);
>   	if (ret) {
>   		dev_err(&pdev->dev, "Error couldn't map SRAM to device\n");
> -		goto out_clk_disable_unprepare;
> +		goto out_dispose_mapping;
>   	}
>   
>   	db->phy_node = of_parse_phandle(np, "phy-handle", 0);
> @@ -1068,8 +1062,6 @@ static int emac_probe(struct platform_device *pdev)
>   
>   out_release_sram:
>   	sunxi_sram_release(&pdev->dev);
> -out_clk_disable_unprepare:
> -	clk_disable_unprepare(db->clk);
>   out_dispose_mapping:
>   	irq_dispose_mapping(ndev->irq);
>   	dma_release_channel(db->rx_chan);
> @@ -1095,7 +1087,6 @@ static void emac_remove(struct platform_device *pdev)
>   
>   	unregister_netdev(ndev);
>   	sunxi_sram_release(&pdev->dev);
> -	clk_disable_unprepare(db->clk);
>   	irq_dispose_mapping(ndev->irq);
>   	iounmap(db->membase);
>   	free_netdev(ndev);
diff mbox series

Patch

diff --git a/drivers/net/ethernet/allwinner/sun4i-emac.c b/drivers/net/ethernet/allwinner/sun4i-emac.c
index d761c08fe5c1..8f42501729b7 100644
--- a/drivers/net/ethernet/allwinner/sun4i-emac.c
+++ b/drivers/net/ethernet/allwinner/sun4i-emac.c
@@ -1005,22 +1005,16 @@  static int emac_probe(struct platform_device *pdev)
 	if (emac_configure_dma(db))
 		netdev_info(ndev, "configure dma failed. disable dma.\n");
 
-	db->clk = devm_clk_get(&pdev->dev, NULL);
+	db->clk = devm_clk_get_enabled(&pdev->dev, NULL);
 	if (IS_ERR(db->clk)) {
 		ret = PTR_ERR(db->clk);
 		goto out_dispose_mapping;
 	}
 
-	ret = clk_prepare_enable(db->clk);
-	if (ret) {
-		dev_err(&pdev->dev, "Error couldn't enable clock (%d)\n", ret);
-		goto out_dispose_mapping;
-	}
-
 	ret = sunxi_sram_claim(&pdev->dev);
 	if (ret) {
 		dev_err(&pdev->dev, "Error couldn't map SRAM to device\n");
-		goto out_clk_disable_unprepare;
+		goto out_dispose_mapping;
 	}
 
 	db->phy_node = of_parse_phandle(np, "phy-handle", 0);
@@ -1068,8 +1062,6 @@  static int emac_probe(struct platform_device *pdev)
 
 out_release_sram:
 	sunxi_sram_release(&pdev->dev);
-out_clk_disable_unprepare:
-	clk_disable_unprepare(db->clk);
 out_dispose_mapping:
 	irq_dispose_mapping(ndev->irq);
 	dma_release_channel(db->rx_chan);
@@ -1095,7 +1087,6 @@  static void emac_remove(struct platform_device *pdev)
 
 	unregister_netdev(ndev);
 	sunxi_sram_release(&pdev->dev);
-	clk_disable_unprepare(db->clk);
 	irq_dispose_mapping(ndev->irq);
 	iounmap(db->membase);
 	free_netdev(ndev);