From patchwork Wed Dec 4 19:34:42 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Hans de Goede X-Patchwork-Id: 13894240 Received: from us-smtp-delivery-124.mimecast.com (us-smtp-delivery-124.mimecast.com [170.10.129.124]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id ED72B1A8F7A for ; Wed, 4 Dec 2024 19:35:01 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=170.10.129.124 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1733340903; cv=none; b=SvCsBV8iHoRFU9eHbxV7hwFlWLElROZunLJAdJl6fYG+e27QEp5cqn5oyxmaQW7hUyeZGHDHNVZFrVMXoEUNepy7fsrY21eRrTNuUmtYQwTLeVlb0cg/dyhH/BLriFJeXfFIYHm/81HjZJNd1fKHc2bWA0fb0B5uVzpMeQkRA4Y= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1733340903; c=relaxed/simple; bh=/p0NkQEwMWVM5WBSL506+Fwl4vKlV/dldWoSHTxjAyg=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=ofcJwiZx8J18PRzdo10zbUDfYxtcY2QVGyupeBQ+Te1wNklomd/1LTm/G4/vUY7KkH68yYjpMoNSALnQOHt8ME7pUbd0J6bzuStxGDxqmHdX9gFjBwz/rHkT8NvoXoUeiqtCgcvjVSO+OJhZZeUevpUJAJGrabtS0+2rrRChBw0= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=redhat.com; spf=pass smtp.mailfrom=redhat.com; dkim=pass (1024-bit key) header.d=redhat.com header.i=@redhat.com header.b=CykdjbMQ; arc=none smtp.client-ip=170.10.129.124 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=redhat.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=redhat.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (1024-bit key) header.d=redhat.com header.i=@redhat.com header.b="CykdjbMQ" DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=redhat.com; s=mimecast20190719; t=1733340901; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=bAJt8ilyZxTzCBVV/sG8+3oVUMO6niS5tW5My/xfuJ4=; b=CykdjbMQf5VBfE2VZktL5M9PB8QtaxiShYMdI5UONXqOkW4b4KECXvlNy9uhcASp0OKLDQ /QJXyJbC/GzVOmZ9qhCYKBtLAXy3inGgoKr2LB+BDCyXj2TqibMBM/hlADNOG0BiFmB+po vlXrSjZiIVGTe+E4UHa8y9sD8T0/2Jo= Received: from mx-prod-mc-05.mail-002.prod.us-west-2.aws.redhat.com (ec2-54-186-198-63.us-west-2.compute.amazonaws.com [54.186.198.63]) by relay.mimecast.com with ESMTP with STARTTLS (version=TLSv1.3, cipher=TLS_AES_256_GCM_SHA384) id us-mta-515-TtX_gMAXOqSwyV5nnOhrzg-1; Wed, 04 Dec 2024 14:34:57 -0500 X-MC-Unique: TtX_gMAXOqSwyV5nnOhrzg-1 X-Mimecast-MFC-AGG-ID: TtX_gMAXOqSwyV5nnOhrzg Received: from mx-prod-int-03.mail-002.prod.us-west-2.aws.redhat.com (mx-prod-int-03.mail-002.prod.us-west-2.aws.redhat.com [10.30.177.12]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (2048 bits) server-digest SHA256) (No client certificate requested) by mx-prod-mc-05.mail-002.prod.us-west-2.aws.redhat.com (Postfix) with ESMTPS id 001391955D58; Wed, 4 Dec 2024 19:34:57 +0000 (UTC) Received: from localhost.localdomain (unknown [10.39.194.11]) by mx-prod-int-03.mail-002.prod.us-west-2.aws.redhat.com (Postfix) with ESMTP id A43EE19560A2; Wed, 4 Dec 2024 19:34:55 +0000 (UTC) From: Hans de Goede To: =?utf-8?q?Ilpo_J=C3=A4rvinen?= , Andy Shevchenko Cc: Hans de Goede , platform-driver-x86@vger.kernel.org Subject: [PATCH v3 2/2] platform/x86: x86-android-tablets: Add Vexia EDU ATLA 10 EC battery driver Date: Wed, 4 Dec 2024 20:34:42 +0100 Message-ID: <20241204193442.65374-3-hdegoede@redhat.com> In-Reply-To: <20241204193442.65374-1-hdegoede@redhat.com> References: <20241204193442.65374-1-hdegoede@redhat.com> Precedence: bulk X-Mailing-List: platform-driver-x86@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-Scanned-By: MIMEDefang 3.0 on 10.30.177.12 The Vexia EDU ATLA 10 tablet has an embedded controller instead of giving the os direct access to the charger + fuel-gauge ICs as is normal on tablets designed for Android. There is ACPI Battery device in the DSDT using the EC which should work except that it expects the I2C controller to be enumerated as an ACPI device and the tablet's BIOS enumerates all LPSS devices as PCI devices (and changing the LPSS BIOS settings from PCI -> ACPI does not work). Add a power_supply class driver for the Atla 10 EC to expert battery info to userspace. This is made part of the x86-android-tablets directory and Kconfig option because the i2c_client it binds to is instantiated by the x86-android-tablets kmod. Reviewed-by: Andy Shevchenko Signed-off-by: Hans de Goede --- Changes in v3: - Use I2C_SMBUS_BLOCK_MAX instead of hardcoding 32 bytes as bufsize - Add UPDATE_INTERVAL_JIFFIES define Changes in v2: - Makefile tweaks - postfix variable/define names with units (e.g. _mV / _mAh) - Replace i2c_smbus_read_i2c_block_data() with i2c_smbus_read_block_data() which takes care of the length byte prefixing the buffer for us - Adress other small review remarks --- .../platform/x86/x86-android-tablets/Makefile | 2 +- .../x86/x86-android-tablets/vexia_atla10_ec.c | 261 ++++++++++++++++++ 2 files changed, 262 insertions(+), 1 deletion(-) create mode 100644 drivers/platform/x86/x86-android-tablets/vexia_atla10_ec.c diff --git a/drivers/platform/x86/x86-android-tablets/Makefile b/drivers/platform/x86/x86-android-tablets/Makefile index 41ece5a37137..313be30548bc 100644 --- a/drivers/platform/x86/x86-android-tablets/Makefile +++ b/drivers/platform/x86/x86-android-tablets/Makefile @@ -3,7 +3,7 @@ # X86 Android tablet support Makefile # +obj-$(CONFIG_X86_ANDROID_TABLETS) += vexia_atla10_ec.o obj-$(CONFIG_X86_ANDROID_TABLETS) += x86-android-tablets.o - x86-android-tablets-y := core.o dmi.o shared-psy-info.o \ asus.o lenovo.o other.o diff --git a/drivers/platform/x86/x86-android-tablets/vexia_atla10_ec.c b/drivers/platform/x86/x86-android-tablets/vexia_atla10_ec.c new file mode 100644 index 000000000000..5d02af1c5aaa --- /dev/null +++ b/drivers/platform/x86/x86-android-tablets/vexia_atla10_ec.c @@ -0,0 +1,261 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * power_supply class (battery) driver for the I2C attached embedded controller + * found on Vexia EDU ATLA 10 (9V version) tablets. + * + * This is based on the ACPI Battery device in the DSDT which should work + * expect that it expects the I2C controller to be enumerated as an ACPI + * device and the tablet's BIOS enumerates all LPSS devices as PCI devices + * (and changing the LPSS BIOS settings from PCI -> ACPI does not work). + * + * Copyright (c) 2024 Hans de Goede + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +/* State field uses ACPI Battery spec status bits */ +#define ACPI_BATTERY_STATE_DISCHARGING BIT(0) +#define ACPI_BATTERY_STATE_CHARGING BIT(1) + +#define ATLA10_EC_BATTERY_STATE_COMMAND 0x87 +#define ATLA10_EC_BATTERY_INFO_COMMAND 0x88 + +/* From broken ACPI battery device in DSDT */ +#define ATLA10_EC_VOLTAGE_MIN_DESIGN_uV 3750000 + +/* Update data every 5 seconds */ +#define UPDATE_INTERVAL_JIFFIES (5 * HZ) + +struct atla10_ec_battery_state { + u8 status; /* Using ACPI Battery spec status bits */ + u8 capacity; /* Percent */ + __le16 charge_now_mAh; + __le16 voltage_now_mV; + __le16 current_now_mA; + __le16 charge_full_mAh; + __le16 temp; /* centi degrees Celsius */ +} __packed; + +struct atla10_ec_battery_info { + __le16 charge_full_design_mAh; + __le16 voltage_now_mV; /* Should be design voltage, but is not ? */ + __le16 charge_full_design2_mAh; +} __packed; + +struct atla10_ec_data { + struct i2c_client *client; + struct power_supply *psy; + struct delayed_work work; + struct mutex update_lock; + struct atla10_ec_battery_info info; + struct atla10_ec_battery_state state; + bool valid; /* true if state is valid */ + unsigned long last_update; /* In jiffies */ +}; + +static int atla10_ec_cmd(struct atla10_ec_data *data, u8 cmd, u8 len, u8 *values) +{ + struct device *dev = &data->client->dev; + u8 buf[I2C_SMBUS_BLOCK_MAX]; + int ret; + + ret = i2c_smbus_read_block_data(data->client, cmd, buf); + if (ret != len) { + dev_err(dev, "I2C command 0x%02x error: %d\n", cmd, ret); + return -EIO; + } + + memcpy(values, buf, len); + return 0; +} + +static int atla10_ec_update(struct atla10_ec_data *data) +{ + int ret; + + if (data->valid && time_before(jiffies, data->last_update + UPDATE_INTERVAL_JIFFIES)) + return 0; + + ret = atla10_ec_cmd(data, ATLA10_EC_BATTERY_STATE_COMMAND, + sizeof(data->state), (u8 *)&data->state); + if (ret) + return ret; + + data->last_update = jiffies; + data->valid = true; + return 0; +} + +static int atla10_ec_psy_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct atla10_ec_data *data = power_supply_get_drvdata(psy); + int charge_now_mAh, charge_full_mAh, ret; + + guard(mutex)(&data->update_lock); + + ret = atla10_ec_update(data); + if (ret) + return ret; + + switch (psp) { + case POWER_SUPPLY_PROP_STATUS: + if (data->state.status & ACPI_BATTERY_STATE_DISCHARGING) + val->intval = POWER_SUPPLY_STATUS_DISCHARGING; + else if (data->state.status & ACPI_BATTERY_STATE_CHARGING) + val->intval = POWER_SUPPLY_STATUS_CHARGING; + else if (data->state.capacity == 100) + val->intval = POWER_SUPPLY_STATUS_FULL; + else + val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; + break; + case POWER_SUPPLY_PROP_CAPACITY: + val->intval = data->state.capacity; + break; + case POWER_SUPPLY_PROP_CHARGE_NOW: + /* + * The EC has a bug where it reports charge-full-design as + * charge-now when the battery is full. Clamp charge-now to + * charge-full to workaround this. + */ + charge_now_mAh = le16_to_cpu(data->state.charge_now_mAh); + charge_full_mAh = le16_to_cpu(data->state.charge_full_mAh); + val->intval = min(charge_now_mAh, charge_full_mAh) * 1000; + break; + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + val->intval = le16_to_cpu(data->state.voltage_now_mV) * 1000; + break; + case POWER_SUPPLY_PROP_CURRENT_NOW: + val->intval = le16_to_cpu(data->state.current_now_mA) * 1000; + /* + * Documentation/ABI/testing/sysfs-class-power specifies + * negative current for discharging. + */ + if (data->state.status & ACPI_BATTERY_STATE_DISCHARGING) + val->intval = -val->intval; + break; + case POWER_SUPPLY_PROP_CHARGE_FULL: + val->intval = le16_to_cpu(data->state.charge_full_mAh) * 1000; + break; + case POWER_SUPPLY_PROP_TEMP: + val->intval = le16_to_cpu(data->state.temp) / 10; + break; + case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN: + val->intval = le16_to_cpu(data->info.charge_full_design_mAh) * 1000; + break; + case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: + val->intval = ATLA10_EC_VOLTAGE_MIN_DESIGN_uV; + break; + case POWER_SUPPLY_PROP_PRESENT: + val->intval = 1; + break; + case POWER_SUPPLY_PROP_TECHNOLOGY: + val->intval = POWER_SUPPLY_TECHNOLOGY_LIPO; + break; + default: + return -EINVAL; + } + + return 0; +} + +static void atla10_ec_external_power_changed_work(struct work_struct *work) +{ + struct atla10_ec_data *data = container_of(work, struct atla10_ec_data, work.work); + + dev_dbg(&data->client->dev, "External power changed\n"); + data->valid = false; + power_supply_changed(data->psy); +} + +static void atla10_ec_external_power_changed(struct power_supply *psy) +{ + struct atla10_ec_data *data = power_supply_get_drvdata(psy); + + /* After charger plug in/out wait 0.5s for things to stabilize */ + mod_delayed_work(system_wq, &data->work, HZ / 2); +} + +static const enum power_supply_property atla10_ec_psy_props[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_CAPACITY, + POWER_SUPPLY_PROP_CHARGE_NOW, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_CURRENT_NOW, + POWER_SUPPLY_PROP_CHARGE_FULL, + POWER_SUPPLY_PROP_TEMP, + POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, + POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_TECHNOLOGY, +}; + +static const struct power_supply_desc atla10_ec_psy_desc = { + .name = "atla10_ec_battery", + .type = POWER_SUPPLY_TYPE_BATTERY, + .properties = atla10_ec_psy_props, + .num_properties = ARRAY_SIZE(atla10_ec_psy_props), + .get_property = atla10_ec_psy_get_property, + .external_power_changed = atla10_ec_external_power_changed, +}; + +static int atla10_ec_probe(struct i2c_client *client) +{ + struct power_supply_config psy_cfg = { }; + struct device *dev = &client->dev; + struct atla10_ec_data *data; + int ret; + + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + psy_cfg.drv_data = data; + data->client = client; + + ret = devm_mutex_init(dev, &data->update_lock); + if (ret) + return ret; + + ret = devm_delayed_work_autocancel(dev, &data->work, + atla10_ec_external_power_changed_work); + if (ret) + return ret; + + ret = atla10_ec_cmd(data, ATLA10_EC_BATTERY_INFO_COMMAND, + sizeof(data->info), (u8 *)&data->info); + if (ret) + return ret; + + data->psy = devm_power_supply_register(dev, &atla10_ec_psy_desc, &psy_cfg); + return PTR_ERR_OR_ZERO(data->psy); +} + +static const struct i2c_device_id atla10_ec_id_table[] = { + { "vexia_atla10_ec" }, + { } +}; +MODULE_DEVICE_TABLE(i2c, atla10_ec_id_table); + +static struct i2c_driver atla10_ec_driver = { + .driver = { + .name = "vexia_atla10_ec", + }, + .probe = atla10_ec_probe, + .id_table = atla10_ec_id_table, +}; +module_i2c_driver(atla10_ec_driver); + +MODULE_AUTHOR("Hans de Goede "); +MODULE_DESCRIPTION("Battery driver for Vexia EDU ATLA 10 tablet EC"); +MODULE_LICENSE("GPL");