| Message ID | 20241206161210.163701-11-yazen.ghannam@amd.com (mailing list archive) |
|---|---|
| State | Changes Requested, archived |
| Headers | show |
| Series | AMD NB and SMN rework | expand |
On Fri, 6 Dec 2024, Yazen Ghannam wrote: > From: Mario Limonciello <mario.limonciello@amd.com> > > SMN access was bolted into amd_nb mostly as convenience. This has > limitations though that require incurring tech debt to keep it working. > > Move SMN access to the newly introduced AMD Node driver. > > Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> > Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com> > --- > > Notes: > Link: > https://lore.kernel.org/20241023172150.659002-11-yazen.ghannam@amd.com > > v1->v2: > * Move code to AMD_NODE rather than create a new compilation unit. > > MAINTAINERS | 1 + > arch/x86/include/asm/amd_nb.h | 3 - > arch/x86/include/asm/amd_node.h | 3 + > arch/x86/kernel/amd_nb.c | 89 --------------------------- > arch/x86/kernel/amd_node.c | 90 ++++++++++++++++++++++++++++ > arch/x86/pci/fixup.c | 4 +- > drivers/edac/Kconfig | 1 + > drivers/edac/amd64_edac.c | 1 + > drivers/hwmon/Kconfig | 2 +- > drivers/hwmon/k10temp.c | 2 +- > drivers/platform/x86/amd/pmc/Kconfig | 2 +- > drivers/platform/x86/amd/pmc/pmc.c | 3 +- > drivers/platform/x86/amd/pmf/Kconfig | 2 +- > drivers/platform/x86/amd/pmf/core.c | 2 +- For pdx86, Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> -- i. > drivers/ras/amd/atl/Kconfig | 1 + > drivers/ras/amd/atl/internal.h | 1 + > 16 files changed, 107 insertions(+), 100 deletions(-) > > diff --git a/MAINTAINERS b/MAINTAINERS > index d7617f196bda..ca383cb1539f 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -1122,6 +1122,7 @@ S: Supported > F: drivers/i2c/busses/i2c-amd-asf-plat.c > > AMD NODE DRIVER > +M: Mario Limonciello <mario.limonciello@amd.com> > M: Yazen Ghannam <yazen.ghannam@amd.com> > L: linux-kernel@vger.kernel.org > S: Supported > diff --git a/arch/x86/include/asm/amd_nb.h b/arch/x86/include/asm/amd_nb.h > index 066dc3801430..4c4efb93045e 100644 > --- a/arch/x86/include/asm/amd_nb.h > +++ b/arch/x86/include/asm/amd_nb.h > @@ -21,9 +21,6 @@ extern int amd_numa_init(void); > extern int amd_get_subcaches(int); > extern int amd_set_subcaches(int, unsigned long); > > -int __must_check amd_smn_read(u16 node, u32 address, u32 *value); > -int __must_check amd_smn_write(u16 node, u32 address, u32 value); > - > struct amd_l3_cache { > unsigned indices; > u8 subcaches[4]; > diff --git a/arch/x86/include/asm/amd_node.h b/arch/x86/include/asm/amd_node.h > index 419a0ad13ef2..113ad3e8ee40 100644 > --- a/arch/x86/include/asm/amd_node.h > +++ b/arch/x86/include/asm/amd_node.h > @@ -30,4 +30,7 @@ static inline u16 amd_num_nodes(void) > return topology_amd_nodes_per_pkg() * topology_max_packages(); > } > > +int __must_check amd_smn_read(u16 node, u32 address, u32 *value); > +int __must_check amd_smn_write(u16 node, u32 address, u32 value); > + > #endif /*_ASM_X86_AMD_NODE_H_*/ > diff --git a/arch/x86/kernel/amd_nb.c b/arch/x86/kernel/amd_nb.c > index 2ad67efe9032..2729e99806ec 100644 > --- a/arch/x86/kernel/amd_nb.c > +++ b/arch/x86/kernel/amd_nb.c > @@ -15,9 +15,6 @@ > #include <linux/pci_ids.h> > #include <asm/amd_nb.h> > > -/* Protect the PCI config register pairs used for SMN. */ > -static DEFINE_MUTEX(smn_mutex); > - > static u32 *flush_words; > > static const struct pci_device_id amd_nb_misc_ids[] = { > @@ -59,92 +56,6 @@ struct amd_northbridge *node_to_amd_nb(int node) > } > EXPORT_SYMBOL_GPL(node_to_amd_nb); > > -/* > - * SMN accesses may fail in ways that are difficult to detect here in the called > - * functions amd_smn_read() and amd_smn_write(). Therefore, callers must do > - * their own checking based on what behavior they expect. > - * > - * For SMN reads, the returned value may be zero if the register is Read-as-Zero. > - * Or it may be a "PCI Error Response", e.g. all 0xFFs. The "PCI Error Response" > - * can be checked here, and a proper error code can be returned. > - * > - * But the Read-as-Zero response cannot be verified here. A value of 0 may be > - * correct in some cases, so callers must check that this correct is for the > - * register/fields they need. > - * > - * For SMN writes, success can be determined through a "write and read back" > - * However, this is not robust when done here. > - * > - * Possible issues: > - * > - * 1) Bits that are "Write-1-to-Clear". In this case, the read value should > - * *not* match the write value. > - * > - * 2) Bits that are "Read-as-Zero"/"Writes-Ignored". This information cannot be > - * known here. > - * > - * 3) Bits that are "Reserved / Set to 1". Ditto above. > - * > - * Callers of amd_smn_write() should do the "write and read back" check > - * themselves, if needed. > - * > - * For #1, they can see if their target bits got cleared. > - * > - * For #2 and #3, they can check if their target bits got set as intended. > - * > - * This matches what is done for RDMSR/WRMSR. As long as there's no #GP, then > - * the operation is considered a success, and the caller does their own > - * checking. > - */ > -static int __amd_smn_rw(u16 node, u32 address, u32 *value, bool write) > -{ > - struct pci_dev *root; > - int err = -ENODEV; > - > - if (node >= amd_northbridges.num) > - goto out; > - > - root = node_to_amd_nb(node)->root; > - if (!root) > - goto out; > - > - mutex_lock(&smn_mutex); > - > - err = pci_write_config_dword(root, 0x60, address); > - if (err) { > - pr_warn("Error programming SMN address 0x%x.\n", address); > - goto out_unlock; > - } > - > - err = (write ? pci_write_config_dword(root, 0x64, *value) > - : pci_read_config_dword(root, 0x64, value)); > - > -out_unlock: > - mutex_unlock(&smn_mutex); > - > -out: > - return err; > -} > - > -int __must_check amd_smn_read(u16 node, u32 address, u32 *value) > -{ > - int err = __amd_smn_rw(node, address, value, false); > - > - if (PCI_POSSIBLE_ERROR(*value)) { > - err = -ENODEV; > - *value = 0; > - } > - > - return err; > -} > -EXPORT_SYMBOL_GPL(amd_smn_read); > - > -int __must_check amd_smn_write(u16 node, u32 address, u32 value) > -{ > - return __amd_smn_rw(node, address, &value, true); > -} > -EXPORT_SYMBOL_GPL(amd_smn_write); > - > static int amd_cache_northbridges(void) > { > struct amd_northbridge *nb; > diff --git a/arch/x86/kernel/amd_node.c b/arch/x86/kernel/amd_node.c > index 4eea8c7d8090..95e5ca0acc90 100644 > --- a/arch/x86/kernel/amd_node.c > +++ b/arch/x86/kernel/amd_node.c > @@ -8,6 +8,7 @@ > * Author: Yazen Ghannam <Yazen.Ghannam@amd.com> > */ > > +#include <asm/amd_nb.h> > #include <asm/amd_node.h> > > /* > @@ -88,3 +89,92 @@ struct pci_dev *amd_node_get_root(u16 node) > pci_dbg(root, "is root for AMD node %u\n", node); > return root; > } > + > +/* Protect the PCI config register pairs used for SMN. */ > +static DEFINE_MUTEX(smn_mutex); > + > +/* > + * SMN accesses may fail in ways that are difficult to detect here in the called > + * functions amd_smn_read() and amd_smn_write(). Therefore, callers must do > + * their own checking based on what behavior they expect. > + * > + * For SMN reads, the returned value may be zero if the register is Read-as-Zero. > + * Or it may be a "PCI Error Response", e.g. all 0xFFs. The "PCI Error Response" > + * can be checked here, and a proper error code can be returned. > + * > + * But the Read-as-Zero response cannot be verified here. A value of 0 may be > + * correct in some cases, so callers must check that this correct is for the > + * register/fields they need. > + * > + * For SMN writes, success can be determined through a "write and read back" > + * However, this is not robust when done here. > + * > + * Possible issues: > + * > + * 1) Bits that are "Write-1-to-Clear". In this case, the read value should > + * *not* match the write value. > + * > + * 2) Bits that are "Read-as-Zero"/"Writes-Ignored". This information cannot be > + * known here. > + * > + * 3) Bits that are "Reserved / Set to 1". Ditto above. > + * > + * Callers of amd_smn_write() should do the "write and read back" check > + * themselves, if needed. > + * > + * For #1, they can see if their target bits got cleared. > + * > + * For #2 and #3, they can check if their target bits got set as intended. > + * > + * This matches what is done for RDMSR/WRMSR. As long as there's no #GP, then > + * the operation is considered a success, and the caller does their own > + * checking. > + */ > +static int __amd_smn_rw(u16 node, u32 address, u32 *value, bool write) > +{ > + struct pci_dev *root; > + int err = -ENODEV; > + > + if (node >= amd_nb_num()) > + goto out; > + > + root = node_to_amd_nb(node)->root; > + if (!root) > + goto out; > + > + mutex_lock(&smn_mutex); > + > + err = pci_write_config_dword(root, 0x60, address); > + if (err) { > + pr_warn("Error programming SMN address 0x%x.\n", address); > + goto out_unlock; > + } > + > + err = (write ? pci_write_config_dword(root, 0x64, *value) > + : pci_read_config_dword(root, 0x64, value)); > + > +out_unlock: > + mutex_unlock(&smn_mutex); > + > +out: > + return err; > +} > + > +int __must_check amd_smn_read(u16 node, u32 address, u32 *value) > +{ > + int err = __amd_smn_rw(node, address, value, false); > + > + if (PCI_POSSIBLE_ERROR(*value)) { > + err = -ENODEV; > + *value = 0; > + } > + > + return err; > +} > +EXPORT_SYMBOL_GPL(amd_smn_read); > + > +int __must_check amd_smn_write(u16 node, u32 address, u32 value) > +{ > + return __amd_smn_rw(node, address, &value, true); > +} > +EXPORT_SYMBOL_GPL(amd_smn_write); > diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c > index 0681ecfe3430..592fb9d97e77 100644 > --- a/arch/x86/pci/fixup.c > +++ b/arch/x86/pci/fixup.c > @@ -9,7 +9,7 @@ > #include <linux/pci.h> > #include <linux/suspend.h> > #include <linux/vgaarb.h> > -#include <asm/amd_nb.h> > +#include <asm/amd_node.h> > #include <asm/hpet.h> > #include <asm/pci_x86.h> > > @@ -828,7 +828,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x7910, rs690_fix_64bit_dma); > > #endif > > -#ifdef CONFIG_AMD_NB > +#ifdef CONFIG_AMD_NODE > > #define AMD_15B8_RCC_DEV2_EPF0_STRAP2 0x10136008 > #define AMD_15B8_RCC_DEV2_EPF0_STRAP2_NO_SOFT_RESET_DEV2_F0_MASK 0x00000080L > diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig > index 06f7b43a6f78..cb97d7bdae31 100644 > --- a/drivers/edac/Kconfig > +++ b/drivers/edac/Kconfig > @@ -78,6 +78,7 @@ config EDAC_GHES > config EDAC_AMD64 > tristate "AMD64 (Opteron, Athlon64)" > depends on AMD_NB && EDAC_DECODE_MCE > + depends on AMD_NODE > imply AMD_ATL > help > Support for error detection and correction of DRAM ECC errors on > diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c > index ddfbdb66b794..29465088639c 100644 > --- a/drivers/edac/amd64_edac.c > +++ b/drivers/edac/amd64_edac.c > @@ -2,6 +2,7 @@ > #include <linux/ras.h> > #include "amd64_edac.h" > #include <asm/amd_nb.h> > +#include <asm/amd_node.h> > > static struct edac_pci_ctl_info *pci_ctl; > > diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig > index dd376602f3f1..ea13ea482a63 100644 > --- a/drivers/hwmon/Kconfig > +++ b/drivers/hwmon/Kconfig > @@ -324,7 +324,7 @@ config SENSORS_K8TEMP > > config SENSORS_K10TEMP > tristate "AMD Family 10h+ temperature sensor" > - depends on X86 && PCI && AMD_NB > + depends on X86 && PCI && AMD_NODE > help > If you say yes here you get support for the temperature > sensor(s) inside your CPU. Supported are later revisions of > diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c > index cefa8cd184c8..d0b4cc9a5011 100644 > --- a/drivers/hwmon/k10temp.c > +++ b/drivers/hwmon/k10temp.c > @@ -20,7 +20,7 @@ > #include <linux/module.h> > #include <linux/pci.h> > #include <linux/pci_ids.h> > -#include <asm/amd_nb.h> > +#include <asm/amd_node.h> > #include <asm/processor.h> > > MODULE_DESCRIPTION("AMD Family 10h+ CPU core temperature monitor"); > diff --git a/drivers/platform/x86/amd/pmc/Kconfig b/drivers/platform/x86/amd/pmc/Kconfig > index 94f9563d8be7..eeffdafd686e 100644 > --- a/drivers/platform/x86/amd/pmc/Kconfig > +++ b/drivers/platform/x86/amd/pmc/Kconfig > @@ -5,7 +5,7 @@ > > config AMD_PMC > tristate "AMD SoC PMC driver" > - depends on ACPI && PCI && RTC_CLASS && AMD_NB > + depends on ACPI && PCI && RTC_CLASS && AMD_NODE > depends on SUSPEND > select SERIO > help > diff --git a/drivers/platform/x86/amd/pmc/pmc.c b/drivers/platform/x86/amd/pmc/pmc.c > index 26b878ee5191..941b7753dd78 100644 > --- a/drivers/platform/x86/amd/pmc/pmc.c > +++ b/drivers/platform/x86/amd/pmc/pmc.c > @@ -10,7 +10,6 @@ > > #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt > > -#include <asm/amd_nb.h> > #include <linux/acpi.h> > #include <linux/bitfield.h> > #include <linux/bits.h> > @@ -28,6 +27,8 @@ > #include <linux/seq_file.h> > #include <linux/uaccess.h> > > +#include <asm/amd_node.h> > + > #include "pmc.h" > > /* SMU communication registers */ > diff --git a/drivers/platform/x86/amd/pmf/Kconfig b/drivers/platform/x86/amd/pmf/Kconfig > index 99d67cdbd91e..25b8f7ae3abd 100644 > --- a/drivers/platform/x86/amd/pmf/Kconfig > +++ b/drivers/platform/x86/amd/pmf/Kconfig > @@ -7,7 +7,7 @@ config AMD_PMF > tristate "AMD Platform Management Framework" > depends on ACPI && PCI > depends on POWER_SUPPLY > - depends on AMD_NB > + depends on AMD_NODE > select ACPI_PLATFORM_PROFILE > depends on TEE && AMDTEE > depends on AMD_SFH_HID > diff --git a/drivers/platform/x86/amd/pmf/core.c b/drivers/platform/x86/amd/pmf/core.c > index 06a97c533cb8..7f88f3121cf5 100644 > --- a/drivers/platform/x86/amd/pmf/core.c > +++ b/drivers/platform/x86/amd/pmf/core.c > @@ -8,13 +8,13 @@ > * Author: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> > */ > > -#include <asm/amd_nb.h> > #include <linux/debugfs.h> > #include <linux/iopoll.h> > #include <linux/module.h> > #include <linux/pci.h> > #include <linux/platform_device.h> > #include <linux/power_supply.h> > +#include <asm/amd_node.h> > #include "pmf.h" > > /* PMF-SMU communication registers */ > diff --git a/drivers/ras/amd/atl/Kconfig b/drivers/ras/amd/atl/Kconfig > index 551680073e43..6e03942cd7da 100644 > --- a/drivers/ras/amd/atl/Kconfig > +++ b/drivers/ras/amd/atl/Kconfig > @@ -10,6 +10,7 @@ > config AMD_ATL > tristate "AMD Address Translation Library" > depends on AMD_NB && X86_64 && RAS > + depends on AMD_NODE > depends on MEMORY_FAILURE > default N > help > diff --git a/drivers/ras/amd/atl/internal.h b/drivers/ras/amd/atl/internal.h > index 143d04c779a8..f9be26d25348 100644 > --- a/drivers/ras/amd/atl/internal.h > +++ b/drivers/ras/amd/atl/internal.h > @@ -18,6 +18,7 @@ > #include <linux/ras.h> > > #include <asm/amd_nb.h> > +#include <asm/amd_node.h> > > #include "reg_fields.h" > >
diff --git a/MAINTAINERS b/MAINTAINERS index d7617f196bda..ca383cb1539f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1122,6 +1122,7 @@ S: Supported F: drivers/i2c/busses/i2c-amd-asf-plat.c AMD NODE DRIVER +M: Mario Limonciello <mario.limonciello@amd.com> M: Yazen Ghannam <yazen.ghannam@amd.com> L: linux-kernel@vger.kernel.org S: Supported diff --git a/arch/x86/include/asm/amd_nb.h b/arch/x86/include/asm/amd_nb.h index 066dc3801430..4c4efb93045e 100644 --- a/arch/x86/include/asm/amd_nb.h +++ b/arch/x86/include/asm/amd_nb.h @@ -21,9 +21,6 @@ extern int amd_numa_init(void); extern int amd_get_subcaches(int); extern int amd_set_subcaches(int, unsigned long); -int __must_check amd_smn_read(u16 node, u32 address, u32 *value); -int __must_check amd_smn_write(u16 node, u32 address, u32 value); - struct amd_l3_cache { unsigned indices; u8 subcaches[4]; diff --git a/arch/x86/include/asm/amd_node.h b/arch/x86/include/asm/amd_node.h index 419a0ad13ef2..113ad3e8ee40 100644 --- a/arch/x86/include/asm/amd_node.h +++ b/arch/x86/include/asm/amd_node.h @@ -30,4 +30,7 @@ static inline u16 amd_num_nodes(void) return topology_amd_nodes_per_pkg() * topology_max_packages(); } +int __must_check amd_smn_read(u16 node, u32 address, u32 *value); +int __must_check amd_smn_write(u16 node, u32 address, u32 value); + #endif /*_ASM_X86_AMD_NODE_H_*/ diff --git a/arch/x86/kernel/amd_nb.c b/arch/x86/kernel/amd_nb.c index 2ad67efe9032..2729e99806ec 100644 --- a/arch/x86/kernel/amd_nb.c +++ b/arch/x86/kernel/amd_nb.c @@ -15,9 +15,6 @@ #include <linux/pci_ids.h> #include <asm/amd_nb.h> -/* Protect the PCI config register pairs used for SMN. */ -static DEFINE_MUTEX(smn_mutex); - static u32 *flush_words; static const struct pci_device_id amd_nb_misc_ids[] = { @@ -59,92 +56,6 @@ struct amd_northbridge *node_to_amd_nb(int node) } EXPORT_SYMBOL_GPL(node_to_amd_nb); -/* - * SMN accesses may fail in ways that are difficult to detect here in the called - * functions amd_smn_read() and amd_smn_write(). Therefore, callers must do - * their own checking based on what behavior they expect. - * - * For SMN reads, the returned value may be zero if the register is Read-as-Zero. - * Or it may be a "PCI Error Response", e.g. all 0xFFs. The "PCI Error Response" - * can be checked here, and a proper error code can be returned. - * - * But the Read-as-Zero response cannot be verified here. A value of 0 may be - * correct in some cases, so callers must check that this correct is for the - * register/fields they need. - * - * For SMN writes, success can be determined through a "write and read back" - * However, this is not robust when done here. - * - * Possible issues: - * - * 1) Bits that are "Write-1-to-Clear". In this case, the read value should - * *not* match the write value. - * - * 2) Bits that are "Read-as-Zero"/"Writes-Ignored". This information cannot be - * known here. - * - * 3) Bits that are "Reserved / Set to 1". Ditto above. - * - * Callers of amd_smn_write() should do the "write and read back" check - * themselves, if needed. - * - * For #1, they can see if their target bits got cleared. - * - * For #2 and #3, they can check if their target bits got set as intended. - * - * This matches what is done for RDMSR/WRMSR. As long as there's no #GP, then - * the operation is considered a success, and the caller does their own - * checking. - */ -static int __amd_smn_rw(u16 node, u32 address, u32 *value, bool write) -{ - struct pci_dev *root; - int err = -ENODEV; - - if (node >= amd_northbridges.num) - goto out; - - root = node_to_amd_nb(node)->root; - if (!root) - goto out; - - mutex_lock(&smn_mutex); - - err = pci_write_config_dword(root, 0x60, address); - if (err) { - pr_warn("Error programming SMN address 0x%x.\n", address); - goto out_unlock; - } - - err = (write ? pci_write_config_dword(root, 0x64, *value) - : pci_read_config_dword(root, 0x64, value)); - -out_unlock: - mutex_unlock(&smn_mutex); - -out: - return err; -} - -int __must_check amd_smn_read(u16 node, u32 address, u32 *value) -{ - int err = __amd_smn_rw(node, address, value, false); - - if (PCI_POSSIBLE_ERROR(*value)) { - err = -ENODEV; - *value = 0; - } - - return err; -} -EXPORT_SYMBOL_GPL(amd_smn_read); - -int __must_check amd_smn_write(u16 node, u32 address, u32 value) -{ - return __amd_smn_rw(node, address, &value, true); -} -EXPORT_SYMBOL_GPL(amd_smn_write); - static int amd_cache_northbridges(void) { struct amd_northbridge *nb; diff --git a/arch/x86/kernel/amd_node.c b/arch/x86/kernel/amd_node.c index 4eea8c7d8090..95e5ca0acc90 100644 --- a/arch/x86/kernel/amd_node.c +++ b/arch/x86/kernel/amd_node.c @@ -8,6 +8,7 @@ * Author: Yazen Ghannam <Yazen.Ghannam@amd.com> */ +#include <asm/amd_nb.h> #include <asm/amd_node.h> /* @@ -88,3 +89,92 @@ struct pci_dev *amd_node_get_root(u16 node) pci_dbg(root, "is root for AMD node %u\n", node); return root; } + +/* Protect the PCI config register pairs used for SMN. */ +static DEFINE_MUTEX(smn_mutex); + +/* + * SMN accesses may fail in ways that are difficult to detect here in the called + * functions amd_smn_read() and amd_smn_write(). Therefore, callers must do + * their own checking based on what behavior they expect. + * + * For SMN reads, the returned value may be zero if the register is Read-as-Zero. + * Or it may be a "PCI Error Response", e.g. all 0xFFs. The "PCI Error Response" + * can be checked here, and a proper error code can be returned. + * + * But the Read-as-Zero response cannot be verified here. A value of 0 may be + * correct in some cases, so callers must check that this correct is for the + * register/fields they need. + * + * For SMN writes, success can be determined through a "write and read back" + * However, this is not robust when done here. + * + * Possible issues: + * + * 1) Bits that are "Write-1-to-Clear". In this case, the read value should + * *not* match the write value. + * + * 2) Bits that are "Read-as-Zero"/"Writes-Ignored". This information cannot be + * known here. + * + * 3) Bits that are "Reserved / Set to 1". Ditto above. + * + * Callers of amd_smn_write() should do the "write and read back" check + * themselves, if needed. + * + * For #1, they can see if their target bits got cleared. + * + * For #2 and #3, they can check if their target bits got set as intended. + * + * This matches what is done for RDMSR/WRMSR. As long as there's no #GP, then + * the operation is considered a success, and the caller does their own + * checking. + */ +static int __amd_smn_rw(u16 node, u32 address, u32 *value, bool write) +{ + struct pci_dev *root; + int err = -ENODEV; + + if (node >= amd_nb_num()) + goto out; + + root = node_to_amd_nb(node)->root; + if (!root) + goto out; + + mutex_lock(&smn_mutex); + + err = pci_write_config_dword(root, 0x60, address); + if (err) { + pr_warn("Error programming SMN address 0x%x.\n", address); + goto out_unlock; + } + + err = (write ? pci_write_config_dword(root, 0x64, *value) + : pci_read_config_dword(root, 0x64, value)); + +out_unlock: + mutex_unlock(&smn_mutex); + +out: + return err; +} + +int __must_check amd_smn_read(u16 node, u32 address, u32 *value) +{ + int err = __amd_smn_rw(node, address, value, false); + + if (PCI_POSSIBLE_ERROR(*value)) { + err = -ENODEV; + *value = 0; + } + + return err; +} +EXPORT_SYMBOL_GPL(amd_smn_read); + +int __must_check amd_smn_write(u16 node, u32 address, u32 value) +{ + return __amd_smn_rw(node, address, &value, true); +} +EXPORT_SYMBOL_GPL(amd_smn_write); diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c index 0681ecfe3430..592fb9d97e77 100644 --- a/arch/x86/pci/fixup.c +++ b/arch/x86/pci/fixup.c @@ -9,7 +9,7 @@ #include <linux/pci.h> #include <linux/suspend.h> #include <linux/vgaarb.h> -#include <asm/amd_nb.h> +#include <asm/amd_node.h> #include <asm/hpet.h> #include <asm/pci_x86.h> @@ -828,7 +828,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x7910, rs690_fix_64bit_dma); #endif -#ifdef CONFIG_AMD_NB +#ifdef CONFIG_AMD_NODE #define AMD_15B8_RCC_DEV2_EPF0_STRAP2 0x10136008 #define AMD_15B8_RCC_DEV2_EPF0_STRAP2_NO_SOFT_RESET_DEV2_F0_MASK 0x00000080L diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig index 06f7b43a6f78..cb97d7bdae31 100644 --- a/drivers/edac/Kconfig +++ b/drivers/edac/Kconfig @@ -78,6 +78,7 @@ config EDAC_GHES config EDAC_AMD64 tristate "AMD64 (Opteron, Athlon64)" depends on AMD_NB && EDAC_DECODE_MCE + depends on AMD_NODE imply AMD_ATL help Support for error detection and correction of DRAM ECC errors on diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c index ddfbdb66b794..29465088639c 100644 --- a/drivers/edac/amd64_edac.c +++ b/drivers/edac/amd64_edac.c @@ -2,6 +2,7 @@ #include <linux/ras.h> #include "amd64_edac.h" #include <asm/amd_nb.h> +#include <asm/amd_node.h> static struct edac_pci_ctl_info *pci_ctl; diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index dd376602f3f1..ea13ea482a63 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -324,7 +324,7 @@ config SENSORS_K8TEMP config SENSORS_K10TEMP tristate "AMD Family 10h+ temperature sensor" - depends on X86 && PCI && AMD_NB + depends on X86 && PCI && AMD_NODE help If you say yes here you get support for the temperature sensor(s) inside your CPU. Supported are later revisions of diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c index cefa8cd184c8..d0b4cc9a5011 100644 --- a/drivers/hwmon/k10temp.c +++ b/drivers/hwmon/k10temp.c @@ -20,7 +20,7 @@ #include <linux/module.h> #include <linux/pci.h> #include <linux/pci_ids.h> -#include <asm/amd_nb.h> +#include <asm/amd_node.h> #include <asm/processor.h> MODULE_DESCRIPTION("AMD Family 10h+ CPU core temperature monitor"); diff --git a/drivers/platform/x86/amd/pmc/Kconfig b/drivers/platform/x86/amd/pmc/Kconfig index 94f9563d8be7..eeffdafd686e 100644 --- a/drivers/platform/x86/amd/pmc/Kconfig +++ b/drivers/platform/x86/amd/pmc/Kconfig @@ -5,7 +5,7 @@ config AMD_PMC tristate "AMD SoC PMC driver" - depends on ACPI && PCI && RTC_CLASS && AMD_NB + depends on ACPI && PCI && RTC_CLASS && AMD_NODE depends on SUSPEND select SERIO help diff --git a/drivers/platform/x86/amd/pmc/pmc.c b/drivers/platform/x86/amd/pmc/pmc.c index 26b878ee5191..941b7753dd78 100644 --- a/drivers/platform/x86/amd/pmc/pmc.c +++ b/drivers/platform/x86/amd/pmc/pmc.c @@ -10,7 +10,6 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt -#include <asm/amd_nb.h> #include <linux/acpi.h> #include <linux/bitfield.h> #include <linux/bits.h> @@ -28,6 +27,8 @@ #include <linux/seq_file.h> #include <linux/uaccess.h> +#include <asm/amd_node.h> + #include "pmc.h" /* SMU communication registers */ diff --git a/drivers/platform/x86/amd/pmf/Kconfig b/drivers/platform/x86/amd/pmf/Kconfig index 99d67cdbd91e..25b8f7ae3abd 100644 --- a/drivers/platform/x86/amd/pmf/Kconfig +++ b/drivers/platform/x86/amd/pmf/Kconfig @@ -7,7 +7,7 @@ config AMD_PMF tristate "AMD Platform Management Framework" depends on ACPI && PCI depends on POWER_SUPPLY - depends on AMD_NB + depends on AMD_NODE select ACPI_PLATFORM_PROFILE depends on TEE && AMDTEE depends on AMD_SFH_HID diff --git a/drivers/platform/x86/amd/pmf/core.c b/drivers/platform/x86/amd/pmf/core.c index 06a97c533cb8..7f88f3121cf5 100644 --- a/drivers/platform/x86/amd/pmf/core.c +++ b/drivers/platform/x86/amd/pmf/core.c @@ -8,13 +8,13 @@ * Author: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> */ -#include <asm/amd_nb.h> #include <linux/debugfs.h> #include <linux/iopoll.h> #include <linux/module.h> #include <linux/pci.h> #include <linux/platform_device.h> #include <linux/power_supply.h> +#include <asm/amd_node.h> #include "pmf.h" /* PMF-SMU communication registers */ diff --git a/drivers/ras/amd/atl/Kconfig b/drivers/ras/amd/atl/Kconfig index 551680073e43..6e03942cd7da 100644 --- a/drivers/ras/amd/atl/Kconfig +++ b/drivers/ras/amd/atl/Kconfig @@ -10,6 +10,7 @@ config AMD_ATL tristate "AMD Address Translation Library" depends on AMD_NB && X86_64 && RAS + depends on AMD_NODE depends on MEMORY_FAILURE default N help diff --git a/drivers/ras/amd/atl/internal.h b/drivers/ras/amd/atl/internal.h index 143d04c779a8..f9be26d25348 100644 --- a/drivers/ras/amd/atl/internal.h +++ b/drivers/ras/amd/atl/internal.h @@ -18,6 +18,7 @@ #include <linux/ras.h> #include <asm/amd_nb.h> +#include <asm/amd_node.h> #include "reg_fields.h"