| Message ID | 20241230055721.3843339-1-aichao@kylinos.cn (mailing list archive) |
|---|---|
| State | Changes Requested, archived |
| Headers | show |
| Series | [v3] platform/x86: lenovo-wmi-camera: Use SW_CAMERA_LENS_COVER instead of KEY_CAMERA_ACESS | expand |
Am 30.12.24 um 06:57 schrieb Ai Chao: > Use SW_CAMERA_LENS_COVER instead of KEY_CAMERA_ACESS_ENABLE and > KEY_CAMERA_ACESS_DISABLE. When the camera toggle switch was hit, > the lenovo-wmi-camera driver would report an event code. > > Signed-off-by: Ai Chao <aichao@kylinos.cn> > --- > change for v3 > -Used input_register_device and input_allocate_device. > change for v2 > -Only delays the input-device registration and switches to reporting SW_CAMERA_LENS_COVER. > > drivers/platform/x86/lenovo-wmi-camera.c | 59 +++++++++++++++--------- > 1 file changed, 36 insertions(+), 23 deletions(-) > > diff --git a/drivers/platform/x86/lenovo-wmi-camera.c b/drivers/platform/x86/lenovo-wmi-camera.c > index 0c0bedaf7407..e08960fabf9e 100644 > --- a/drivers/platform/x86/lenovo-wmi-camera.c > +++ b/drivers/platform/x86/lenovo-wmi-camera.c > @@ -26,10 +26,34 @@ enum { > SW_CAMERA_ON = 1, > }; > > +static int camera_shutter_input_setup(struct wmi_device *wdev) > +{ > + struct lenovo_wmi_priv *priv = dev_get_drvdata(&wdev->dev); > + int err; > + > + priv->idev = input_allocate_device(); > + if (!priv->idev) > + return -ENOMEM; > + > + priv->idev->name = "Lenovo WMI Camera Button"; > + priv->idev->phys = "wmi/input0"; > + priv->idev->id.bustype = BUS_HOST; > + priv->idev->dev.parent = &wdev->dev; > + > + input_set_capability(priv->idev, EV_SW, SW_CAMERA_LENS_COVER); > + > + err = input_register_device(priv->idev); > + if (err) { > + input_free_device(priv->idev); > + priv->idev = NULL; > + } > + > + return err; > +} > + > static void lenovo_wmi_notify(struct wmi_device *wdev, union acpi_object *obj) > { > struct lenovo_wmi_priv *priv = dev_get_drvdata(&wdev->dev); > - unsigned int keycode; > u8 camera_mode; > > if (obj->type != ACPI_TYPE_BUFFER) { > @@ -55,11 +79,14 @@ static void lenovo_wmi_notify(struct wmi_device *wdev, union acpi_object *obj) > > mutex_lock(&priv->notify_lock); > > - keycode = camera_mode == SW_CAMERA_ON ? > - KEY_CAMERA_ACCESS_ENABLE : KEY_CAMERA_ACCESS_DISABLE; > - input_report_key(priv->idev, keycode, 1); > - input_sync(priv->idev); > - input_report_key(priv->idev, keycode, 0); > + if (!priv->idev) > + if (camera_shutter_input_setup(wdev)) > + return; You need to call mutex_unlock() here before returning. > + > + if (camera_mode == SW_CAMERA_ON) > + input_report_switch(priv->idev, SW_CAMERA_LENS_COVER, 1); > + else > + input_report_switch(priv->idev, SW_CAMERA_LENS_COVER, 0); > input_sync(priv->idev); The documentation for SW_CAMERA_LENS_COVER says: "set = lens covered" Since i assume SW_CAMMERA_ON means that the camera is enabled i suggest that you report a switch state of 0 if camera_mode is equal to SW_CAMERA_ON. Thanks, Armin Wolf > > mutex_unlock(&priv->notify_lock); > @@ -68,29 +95,12 @@ static void lenovo_wmi_notify(struct wmi_device *wdev, union acpi_object *obj) > static int lenovo_wmi_probe(struct wmi_device *wdev, const void *context) > { > struct lenovo_wmi_priv *priv; > - int ret; > > priv = devm_kzalloc(&wdev->dev, sizeof(*priv), GFP_KERNEL); > if (!priv) > return -ENOMEM; > > dev_set_drvdata(&wdev->dev, priv); > - > - priv->idev = devm_input_allocate_device(&wdev->dev); > - if (!priv->idev) > - return -ENOMEM; > - > - priv->idev->name = "Lenovo WMI Camera Button"; > - priv->idev->phys = "wmi/input0"; > - priv->idev->id.bustype = BUS_HOST; > - priv->idev->dev.parent = &wdev->dev; > - input_set_capability(priv->idev, EV_KEY, KEY_CAMERA_ACCESS_ENABLE); > - input_set_capability(priv->idev, EV_KEY, KEY_CAMERA_ACCESS_DISABLE); > - > - ret = input_register_device(priv->idev); > - if (ret) > - return ret; > - > mutex_init(&priv->notify_lock); > > return 0; > @@ -100,6 +110,9 @@ static void lenovo_wmi_remove(struct wmi_device *wdev) > { > struct lenovo_wmi_priv *priv = dev_get_drvdata(&wdev->dev); > > + if (priv->idev) > + input_unregister_device(priv->idev); > + > mutex_destroy(&priv->notify_lock); > } >
diff --git a/drivers/platform/x86/lenovo-wmi-camera.c b/drivers/platform/x86/lenovo-wmi-camera.c index 0c0bedaf7407..e08960fabf9e 100644 --- a/drivers/platform/x86/lenovo-wmi-camera.c +++ b/drivers/platform/x86/lenovo-wmi-camera.c @@ -26,10 +26,34 @@ enum { SW_CAMERA_ON = 1, }; +static int camera_shutter_input_setup(struct wmi_device *wdev) +{ + struct lenovo_wmi_priv *priv = dev_get_drvdata(&wdev->dev); + int err; + + priv->idev = input_allocate_device(); + if (!priv->idev) + return -ENOMEM; + + priv->idev->name = "Lenovo WMI Camera Button"; + priv->idev->phys = "wmi/input0"; + priv->idev->id.bustype = BUS_HOST; + priv->idev->dev.parent = &wdev->dev; + + input_set_capability(priv->idev, EV_SW, SW_CAMERA_LENS_COVER); + + err = input_register_device(priv->idev); + if (err) { + input_free_device(priv->idev); + priv->idev = NULL; + } + + return err; +} + static void lenovo_wmi_notify(struct wmi_device *wdev, union acpi_object *obj) { struct lenovo_wmi_priv *priv = dev_get_drvdata(&wdev->dev); - unsigned int keycode; u8 camera_mode; if (obj->type != ACPI_TYPE_BUFFER) { @@ -55,11 +79,14 @@ static void lenovo_wmi_notify(struct wmi_device *wdev, union acpi_object *obj) mutex_lock(&priv->notify_lock); - keycode = camera_mode == SW_CAMERA_ON ? - KEY_CAMERA_ACCESS_ENABLE : KEY_CAMERA_ACCESS_DISABLE; - input_report_key(priv->idev, keycode, 1); - input_sync(priv->idev); - input_report_key(priv->idev, keycode, 0); + if (!priv->idev) + if (camera_shutter_input_setup(wdev)) + return; + + if (camera_mode == SW_CAMERA_ON) + input_report_switch(priv->idev, SW_CAMERA_LENS_COVER, 1); + else + input_report_switch(priv->idev, SW_CAMERA_LENS_COVER, 0); input_sync(priv->idev); mutex_unlock(&priv->notify_lock); @@ -68,29 +95,12 @@ static void lenovo_wmi_notify(struct wmi_device *wdev, union acpi_object *obj) static int lenovo_wmi_probe(struct wmi_device *wdev, const void *context) { struct lenovo_wmi_priv *priv; - int ret; priv = devm_kzalloc(&wdev->dev, sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; dev_set_drvdata(&wdev->dev, priv); - - priv->idev = devm_input_allocate_device(&wdev->dev); - if (!priv->idev) - return -ENOMEM; - - priv->idev->name = "Lenovo WMI Camera Button"; - priv->idev->phys = "wmi/input0"; - priv->idev->id.bustype = BUS_HOST; - priv->idev->dev.parent = &wdev->dev; - input_set_capability(priv->idev, EV_KEY, KEY_CAMERA_ACCESS_ENABLE); - input_set_capability(priv->idev, EV_KEY, KEY_CAMERA_ACCESS_DISABLE); - - ret = input_register_device(priv->idev); - if (ret) - return ret; - mutex_init(&priv->notify_lock); return 0; @@ -100,6 +110,9 @@ static void lenovo_wmi_remove(struct wmi_device *wdev) { struct lenovo_wmi_priv *priv = dev_get_drvdata(&wdev->dev); + if (priv->idev) + input_unregister_device(priv->idev); + mutex_destroy(&priv->notify_lock); }
Use SW_CAMERA_LENS_COVER instead of KEY_CAMERA_ACESS_ENABLE and KEY_CAMERA_ACESS_DISABLE. When the camera toggle switch was hit, the lenovo-wmi-camera driver would report an event code. Signed-off-by: Ai Chao <aichao@kylinos.cn> --- change for v3 -Used input_register_device and input_allocate_device. change for v2 -Only delays the input-device registration and switches to reporting SW_CAMERA_LENS_COVER. drivers/platform/x86/lenovo-wmi-camera.c | 59 +++++++++++++++--------- 1 file changed, 36 insertions(+), 23 deletions(-)