diff mbox series

[net-next,v7,1/7] net: phylink: use pl->link_interface in phylink_expects_phy()

Message ID 20250206131859.2960543-2-yong.liang.choong@linux.intel.com (mailing list archive)
State Changes Requested, archived
Headers show
Series Enable SGMII and 2500BASEX interface mode switching for Intel platforms | expand

Commit Message

Choong Yong Liang Feb. 6, 2025, 1:18 p.m. UTC 
The phylink_expects_phy() function allows MAC drivers to check if they are
expecting a PHY to attach. The checking condition in phylink_expects_phy()
aims to achieve the same result as the checking condition in
phylink_attach_phy().

However, the checking condition in phylink_expects_phy() uses
pl->link_config.interface, while phylink_attach_phy() uses
pl->link_interface.

Initially, both pl->link_interface and pl->link_config.interface are set
to SGMII, and pl->cfg_link_an_mode is set to MLO_AN_INBAND.

When the interface switches from SGMII to 2500BASE-X,
pl->link_config.interface is updated by phylink_major_config().
At this point, pl->cfg_link_an_mode remains MLO_AN_INBAND, and
pl->link_config.interface is set to 2500BASE-X.
Subsequently, when the STMMAC link goes down and comes up again,
it is blocked by phylink_expects_phy().

Since phylink_expects_phy() and phylink_attach_phy() aim to achieve the
same result, phylink_expects_phy() should check pl->link_interface,
which never changes, instead of pl->link_config.interface, which is
updated by phylink_major_config().

Signed-off-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
---
 drivers/net/phy/phylink.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 214b62fba991..c173cd8db475 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -2046,7 +2046,7 @@  bool phylink_expects_phy(struct phylink *pl)
 {
 	if (pl->cfg_link_an_mode == MLO_AN_FIXED ||
 	    (pl->cfg_link_an_mode == MLO_AN_INBAND &&
-	     phy_interface_mode_is_8023z(pl->link_config.interface)))
+	     phy_interface_mode_is_8023z(pl->link_interface)))
 		return false;
 	return true;
 }