@@ -176,6 +176,7 @@ struct asus_wmi {
struct asus_rfkill gps;
struct asus_rfkill uwb;
+ bool asus_hwmon_thermal_available;
bool asus_hwmon_fan_manual_mode;
int asus_hwmon_num_fans;
int asus_hwmon_pwm;
@@ -1373,6 +1374,32 @@ static struct attribute *hwmon_attributes[] = {
NULL
};
+static int asus_hwmon_check_thermal_available(struct asus_wmi *asus)
+{
+ u32 value = ASUS_WMI_UNSUPPORTED_METHOD;
+ int err;
+
+ asus->asus_hwmon_thermal_available = false;
+ err = asus_wmi_get_devstate(asus, ASUS_WMI_DEVID_THERMAL_CTRL, &value);
+
+ if (err < 0) {
+ if (err == -ENODEV)
+ return 0;
+
+ return err;
+ }
+
+ /*
+ * If the temperature value in deci-Kelvin is near the absolute
+ * zero temperature, something is clearly wrong.
+ */
+ if (!value || value == 1)
+ return 0;
+
+ asus->asus_hwmon_thermal_available = true;
+ return 0;
+}
+
static umode_t asus_hwmon_sysfs_is_visible(struct kobject *kobj,
struct attribute *attr, int idx)
{
@@ -1386,8 +1413,6 @@ static umode_t asus_hwmon_sysfs_is_visible(struct kobject *kobj,
if (attr == &dev_attr_pwm1.attr)
dev_id = ASUS_WMI_DEVID_FAN_CTRL;
- else if (attr == &dev_attr_temp1_input.attr)
- dev_id = ASUS_WMI_DEVID_THERMAL_CTRL;
if (attr == &dev_attr_fan1_input.attr
|| attr == &dev_attr_fan1_label.attr
@@ -1412,15 +1437,13 @@ static umode_t asus_hwmon_sysfs_is_visible(struct kobject *kobj,
* - reverved bits are non-zero
* - sfun and presence bit are not set
*/
- if (value == ASUS_WMI_UNSUPPORTED_METHOD || value & 0xFFF80000
+ if (value == ASUS_WMI_UNSUPPORTED_METHOD || (value & 0xFFF80000)
|| (!asus->sfun && !(value & ASUS_WMI_DSTS_PRESENCE_BIT)))
ok = false;
else
ok = fan_attr <= asus->asus_hwmon_num_fans;
- } else if (dev_id == ASUS_WMI_DEVID_THERMAL_CTRL) {
- /* If value is zero, something is clearly wrong */
- if (!value)
- ok = false;
+ } else if (attr == &dev_attr_temp1_input.attr) {
+ ok = asus->asus_hwmon_thermal_available;
} else if (fan_attr <= asus->asus_hwmon_num_fans && fan_attr != -1) {
ok = true;
} else {
@@ -1476,6 +1499,14 @@ static int asus_wmi_fan_init(struct asus_wmi *asus)
}
pr_info("Number of fans: %d\n", asus->asus_hwmon_num_fans);
+
+ status = asus_hwmon_check_thermal_available(asus);
+ if (status) {
+ pr_warn("Could not check if thermal available: %d\n", status);
+ return -ENXIO;
+ }
+
+ pr_info("Thermal available: %d\n", asus->asus_hwmon_thermal_available);
return 0;
}
The obviously wrong value 1 for temperature device ID in this driver is returned by at least some devices, including TUF Gaming series laptops, instead of 0 as expected previously. Observable effect is that a temp1_input in hwmon reads temperature near absolute zero. * Consider 0.1 K as erroneous value in addition to 0 K. * Refactor detection of thermal input availability to a separate function. Signed-off-by: Yurii Pavlovskyi <yurii.pavlovskyi@gmail.com> --- drivers/platform/x86/asus-wmi.c | 45 ++++++++++++++++++++++++++++----- 1 file changed, 38 insertions(+), 7 deletions(-)