| Message ID | 20181010133333.24538.53169.stgit@pasha-VirtualBox (mailing list archive) |
|---|---|
| Headers | show |
| Series | Fixing record/replay and adding reverse debugging | expand |
Hi Pavel, Please do not CC me in this series, this isn’t anyhow relevant for me anymore. Regards, Alex ср, 10 окт. 2018 г. в 16:30, Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>: > GDB remote protocol supports reverse debugging of the targets. > It includes 'reverse step' and 'reverse continue' operations. > The first one finds the previous step of the execution, > and the second one is intended to stop at the last breakpoint that > would happen when the program is executed normally. > > Reverse debugging is possible in the replay mode, when at least > one snapshot was created at the record or replay phase. > QEMU can use these snapshots for travelling back in time with GDB. > > Running the execution in replay mode allows using GDB reverse debugging > commands: > - reverse-stepi (or rsi): Steps one instruction to the past. > QEMU loads on of the prior snapshots and proceeds to the desired > instruction forward. When that step is reaches, execution stops. > - reverse-continue (or rc): Runs execution "backwards". > QEMU tries to find breakpoint or watchpoint by loaded prior snapshot > and replaying the execution. Then QEMU loads snapshots again and > replays to the latest breakpoint. When there are no breakpoints in > the examined section of the execution, QEMU finds one more snapshot > and tries again. After the first snapshot is processed, execution > stops at this snapshot. > > The set of patches include the following modifications: > - gdbstub update for reverse debugging support > - functions that automatically perform reverse step and reverse > continue operations > - hmp/qmp commands for manipulating the replay process > - improvement of the snapshotting for saving the execution step > in the snapshot parameters > - other record/replay fixes > > The patches are available in the repository: > https://github.com/ispras/qemu/tree/rr-181010 > > v7 changes: > - rebased to the new master with upstreamed patches from the series > - several improvements in hmp/qmp commands handling (suggested by Markus > Armbruster) > - fixed record/replay with '-rtc base' option enabled > - added document with virtual hardware requirements > > v6 changes: > - rebased to the new version of master > - fixed build of linux-user configurations > - added new clock for slirp and vnc timers > > v5 changes: > - multiple fixes of record/replay bugs appeared after QEMU core update > - changed reverse debugging to 'since 3.1' > > v4 changes: > - changed 'since 2.13' to 'since 3.0' in json (as suggested by Eric Blake) > > v3 changes: > - Fixed PS/2 bug with save/load vm, which caused failures of the replay. > - Rebased to the new code base. > - Minor fixes. > > v2 changes: > - documented reverse debugging > - fixed start vmstate loading in record mode > - documented qcow2 changes (as suggested by Eric Blake) > - made icount SnapshotInfo field optional (as suggested by Eric Blake) > - renamed qmp commands (as suggested by Eric Blake) > - minor changes > > --- > > Pavel Dovgalyuk (19): > block: implement bdrv_snapshot_goto for blkreplay > replay: disable default snapshot for record/replay > replay: update docs for record/replay with block devices > replay: don't drain/flush bdrv queue while RR is working > replay: finish record/replay before closing the disks > qcow2: introduce icount field for snapshots > migration: introduce icount field for snapshots > replay: provide and accessor for rr filename > replay: introduce info hmp/qmp command > replay: introduce breakpoint at the specified step > replay: implement replay-seek command to proceed to the desired step > replay: refine replay-time module > replay: flush rr queue before loading the vmstate > gdbstub: add reverse step support in replay mode > gdbstub: add reverse continue support in replay mode > replay: describe reverse debugging in docs/replay.txt > replay: add BH oneshot event for block layer > replay: init rtc after enabling the replay > replay: document development rules > > > accel/tcg/translator.c | 1 > block/blkreplay.c | 8 + > block/block-backend.c | 3 > block/io.c | 22 +++ > block/qapi.c | 17 ++ > block/qcow2-snapshot.c | 9 + > block/qcow2.h | 2 > blockdev.c | 10 + > cpus.c | 19 ++- > docs/devel/replay.txt | 45 ++++++ > docs/interop/qcow2.txt | 4 + > docs/replay.txt | 45 ++++++ > exec.c | 6 + > gdbstub.c | 50 +++++++ > hmp-commands-info.hx | 14 ++ > hmp-commands.hx | 44 ++++++ > hmp.h | 4 + > include/block/snapshot.h | 1 > include/sysemu/replay.h | 20 +++ > migration/savevm.c | 15 +- > qapi/block-core.json | 7 + > qapi/block.json | 3 > qapi/misc.json | 77 +++++++++++ > replay/Makefile.objs | 3 > replay/replay-debugging.c | 319 > +++++++++++++++++++++++++++++++++++++++++++++ > replay/replay-events.c | 16 ++ > replay/replay-internal.h | 7 + > replay/replay-time.c | 32 ++--- > replay/replay.c | 26 ++++ > stubs/Makefile.objs | 1 > stubs/replay-user.c | 9 + > stubs/replay.c | 10 + > vl.c | 22 ++- > 33 files changed, 818 insertions(+), 53 deletions(-) > create mode 100644 docs/devel/replay.txt > create mode 100644 replay/replay-debugging.c > create mode 100644 stubs/replay-user.c > > -- > Pavel Dovgalyuk >
Ping? Paolo, what do you think about upstreaming this before soft freeze? Pavel Dovgalyuk > -----Original Message----- > From: Pavel Dovgalyuk [mailto:Pavel.Dovgaluk@ispras.ru] > Sent: Wednesday, October 10, 2018 4:34 PM > To: qemu-devel@nongnu.org > Cc: peter.maydell@linaro.org; war2jordan@live.com; pavel.dovgaluk@ispras.ru; mst@redhat.com; > jasowang@redhat.com; zuban32s@gmail.com; kraxel@redhat.com; thomas.dullien@googlemail.com; > artem.k.pisarenko@gmail.com; quintela@redhat.com; ciro.santilli@gmail.com; armbru@redhat.com; > dovgaluk@ispras.ru; dgilbert@redhat.com; boost.lists@gmail.com; alex.bennee@linaro.org; > rth@twiddle.net; kwolf@redhat.com; crosthwaite.peter@gmail.com; mreitz@redhat.com; > maria.klimushenkova@ispras.ru; pbonzini@redhat.com > Subject: [PATCH v7 00/19] Fixing record/replay and adding reverse debugging > > GDB remote protocol supports reverse debugging of the targets. > It includes 'reverse step' and 'reverse continue' operations. > The first one finds the previous step of the execution, > and the second one is intended to stop at the last breakpoint that > would happen when the program is executed normally. > > Reverse debugging is possible in the replay mode, when at least > one snapshot was created at the record or replay phase. > QEMU can use these snapshots for travelling back in time with GDB. > > Running the execution in replay mode allows using GDB reverse debugging > commands: > - reverse-stepi (or rsi): Steps one instruction to the past. > QEMU loads on of the prior snapshots and proceeds to the desired > instruction forward. When that step is reaches, execution stops. > - reverse-continue (or rc): Runs execution "backwards". > QEMU tries to find breakpoint or watchpoint by loaded prior snapshot > and replaying the execution. Then QEMU loads snapshots again and > replays to the latest breakpoint. When there are no breakpoints in > the examined section of the execution, QEMU finds one more snapshot > and tries again. After the first snapshot is processed, execution > stops at this snapshot. > > The set of patches include the following modifications: > - gdbstub update for reverse debugging support > - functions that automatically perform reverse step and reverse > continue operations > - hmp/qmp commands for manipulating the replay process > - improvement of the snapshotting for saving the execution step > in the snapshot parameters > - other record/replay fixes > > The patches are available in the repository: > https://github.com/ispras/qemu/tree/rr-181010 > > v7 changes: > - rebased to the new master with upstreamed patches from the series > - several improvements in hmp/qmp commands handling (suggested by Markus Armbruster) > - fixed record/replay with '-rtc base' option enabled > - added document with virtual hardware requirements > > v6 changes: > - rebased to the new version of master > - fixed build of linux-user configurations > - added new clock for slirp and vnc timers > > v5 changes: > - multiple fixes of record/replay bugs appeared after QEMU core update > - changed reverse debugging to 'since 3.1' > > v4 changes: > - changed 'since 2.13' to 'since 3.0' in json (as suggested by Eric Blake) > > v3 changes: > - Fixed PS/2 bug with save/load vm, which caused failures of the replay. > - Rebased to the new code base. > - Minor fixes. > > v2 changes: > - documented reverse debugging > - fixed start vmstate loading in record mode > - documented qcow2 changes (as suggested by Eric Blake) > - made icount SnapshotInfo field optional (as suggested by Eric Blake) > - renamed qmp commands (as suggested by Eric Blake) > - minor changes > > --- > > Pavel Dovgalyuk (19): > block: implement bdrv_snapshot_goto for blkreplay > replay: disable default snapshot for record/replay > replay: update docs for record/replay with block devices > replay: don't drain/flush bdrv queue while RR is working > replay: finish record/replay before closing the disks > qcow2: introduce icount field for snapshots > migration: introduce icount field for snapshots > replay: provide and accessor for rr filename > replay: introduce info hmp/qmp command > replay: introduce breakpoint at the specified step > replay: implement replay-seek command to proceed to the desired step > replay: refine replay-time module > replay: flush rr queue before loading the vmstate > gdbstub: add reverse step support in replay mode > gdbstub: add reverse continue support in replay mode > replay: describe reverse debugging in docs/replay.txt > replay: add BH oneshot event for block layer > replay: init rtc after enabling the replay > replay: document development rules > > > accel/tcg/translator.c | 1 > block/blkreplay.c | 8 + > block/block-backend.c | 3 > block/io.c | 22 +++ > block/qapi.c | 17 ++ > block/qcow2-snapshot.c | 9 + > block/qcow2.h | 2 > blockdev.c | 10 + > cpus.c | 19 ++- > docs/devel/replay.txt | 45 ++++++ > docs/interop/qcow2.txt | 4 + > docs/replay.txt | 45 ++++++ > exec.c | 6 + > gdbstub.c | 50 +++++++ > hmp-commands-info.hx | 14 ++ > hmp-commands.hx | 44 ++++++ > hmp.h | 4 + > include/block/snapshot.h | 1 > include/sysemu/replay.h | 20 +++ > migration/savevm.c | 15 +- > qapi/block-core.json | 7 + > qapi/block.json | 3 > qapi/misc.json | 77 +++++++++++ > replay/Makefile.objs | 3 > replay/replay-debugging.c | 319 +++++++++++++++++++++++++++++++++++++++++++++ > replay/replay-events.c | 16 ++ > replay/replay-internal.h | 7 + > replay/replay-time.c | 32 ++--- > replay/replay.c | 26 ++++ > stubs/Makefile.objs | 1 > stubs/replay-user.c | 9 + > stubs/replay.c | 10 + > vl.c | 22 ++- > 33 files changed, 818 insertions(+), 53 deletions(-) > create mode 100644 docs/devel/replay.txt > create mode 100644 replay/replay-debugging.c > create mode 100644 stubs/replay-user.c > > -- > Pavel Dovgalyuk
GDB remote protocol supports reverse debugging of the targets. It includes 'reverse step' and 'reverse continue' operations. The first one finds the previous step of the execution, and the second one is intended to stop at the last breakpoint that would happen when the program is executed normally. Reverse debugging is possible in the replay mode, when at least one snapshot was created at the record or replay phase. QEMU can use these snapshots for travelling back in time with GDB. Running the execution in replay mode allows using GDB reverse debugging commands: - reverse-stepi (or rsi): Steps one instruction to the past. QEMU loads on of the prior snapshots and proceeds to the desired instruction forward. When that step is reaches, execution stops. - reverse-continue (or rc): Runs execution "backwards". QEMU tries to find breakpoint or watchpoint by loaded prior snapshot and replaying the execution. Then QEMU loads snapshots again and replays to the latest breakpoint. When there are no breakpoints in the examined section of the execution, QEMU finds one more snapshot and tries again. After the first snapshot is processed, execution stops at this snapshot. The set of patches include the following modifications: - gdbstub update for reverse debugging support - functions that automatically perform reverse step and reverse continue operations - hmp/qmp commands for manipulating the replay process - improvement of the snapshotting for saving the execution step in the snapshot parameters - other record/replay fixes The patches are available in the repository: https://github.com/ispras/qemu/tree/rr-181010 v7 changes: - rebased to the new master with upstreamed patches from the series - several improvements in hmp/qmp commands handling (suggested by Markus Armbruster) - fixed record/replay with '-rtc base' option enabled - added document with virtual hardware requirements v6 changes: - rebased to the new version of master - fixed build of linux-user configurations - added new clock for slirp and vnc timers v5 changes: - multiple fixes of record/replay bugs appeared after QEMU core update - changed reverse debugging to 'since 3.1' v4 changes: - changed 'since 2.13' to 'since 3.0' in json (as suggested by Eric Blake) v3 changes: - Fixed PS/2 bug with save/load vm, which caused failures of the replay. - Rebased to the new code base. - Minor fixes. v2 changes: - documented reverse debugging - fixed start vmstate loading in record mode - documented qcow2 changes (as suggested by Eric Blake) - made icount SnapshotInfo field optional (as suggested by Eric Blake) - renamed qmp commands (as suggested by Eric Blake) - minor changes --- Pavel Dovgalyuk (19): block: implement bdrv_snapshot_goto for blkreplay replay: disable default snapshot for record/replay replay: update docs for record/replay with block devices replay: don't drain/flush bdrv queue while RR is working replay: finish record/replay before closing the disks qcow2: introduce icount field for snapshots migration: introduce icount field for snapshots replay: provide and accessor for rr filename replay: introduce info hmp/qmp command replay: introduce breakpoint at the specified step replay: implement replay-seek command to proceed to the desired step replay: refine replay-time module replay: flush rr queue before loading the vmstate gdbstub: add reverse step support in replay mode gdbstub: add reverse continue support in replay mode replay: describe reverse debugging in docs/replay.txt replay: add BH oneshot event for block layer replay: init rtc after enabling the replay replay: document development rules accel/tcg/translator.c | 1 block/blkreplay.c | 8 + block/block-backend.c | 3 block/io.c | 22 +++ block/qapi.c | 17 ++ block/qcow2-snapshot.c | 9 + block/qcow2.h | 2 blockdev.c | 10 + cpus.c | 19 ++- docs/devel/replay.txt | 45 ++++++ docs/interop/qcow2.txt | 4 + docs/replay.txt | 45 ++++++ exec.c | 6 + gdbstub.c | 50 +++++++ hmp-commands-info.hx | 14 ++ hmp-commands.hx | 44 ++++++ hmp.h | 4 + include/block/snapshot.h | 1 include/sysemu/replay.h | 20 +++ migration/savevm.c | 15 +- qapi/block-core.json | 7 + qapi/block.json | 3 qapi/misc.json | 77 +++++++++++ replay/Makefile.objs | 3 replay/replay-debugging.c | 319 +++++++++++++++++++++++++++++++++++++++++++++ replay/replay-events.c | 16 ++ replay/replay-internal.h | 7 + replay/replay-time.c | 32 ++--- replay/replay.c | 26 ++++ stubs/Makefile.objs | 1 stubs/replay-user.c | 9 + stubs/replay.c | 10 + vl.c | 22 ++- 33 files changed, 818 insertions(+), 53 deletions(-) create mode 100644 docs/devel/replay.txt create mode 100644 replay/replay-debugging.c create mode 100644 stubs/replay-user.c