[v2,0/2] tests/qtest: add some tests for virtio-net failover

Message

Laurent Vivier Nov. 17, 2021, 9:10 p.m. UTC

This series adds a qtest entry to test virtio-net failover feature.

We check following error cases:

- check missing id on device with failover_pair_id triggers an error
- check a primary device plugged on a bus that doesn't support hotplug
  triggers an error

We check the status of the machine before and after hotplugging cards and
feature negotiation:

- check we don't see the primary device at boot if failover is on
- check we see the primary device at boot if failover is off
- check we don't see the primary device if failover is on
  but failover_pair_id is not the one with on (I think this should be changed)
- check the primary device is plugged after the feature negotiation
- check the result if the primary device is plugged before standby device and
  vice-versa
- check the if the primary device is coldplugged and the standy device
  hotplugged and vice-versa
- check the migration triggers the unplug and the hotplug

There is one preliminary patch in the series:

- PATCH 1 introduces a function to enable PCI bridge.
  Failover needs to be plugged on a pcie-root-port and while
  the root port is not configured the cards behind it are not
  available

v2:
- remove PATCH 1 that introduced a function that can be replaced by
  qobject_to_json_pretty() (Markus)
- Add migration to a file and from the file to check the card is
  correctly unplugged on the source, and hotplugged on the dest
- Add an ACPI call to eject the card as the kernel would do

Laurent Vivier (2):
  qtest/libqos: add a function to initialize secondary PCI buses
  tests/qtest: add some tests for virtio-net failover

 include/hw/pci/pci_bridge.h       |   8 +
 tests/qtest/libqos/pci.c          | 118 ++++++
 tests/qtest/libqos/pci.h          |   1 +
 tests/qtest/meson.build           |   3 +
 tests/qtest/virtio-net-failover.c | 635 ++++++++++++++++++++++++++++++
 5 files changed, 765 insertions(+)
 create mode 100644 tests/qtest/virtio-net-failover.c