| Message ID | 20220504152025.1785704-1-eric.auger@redhat.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | qtests/libqos: Allow PCI tests to be run with virt-machine | expand |
Hi, On 5/4/22 17:20, Eric Auger wrote: > Up to now the virt-machine node only contains a virtio-mmio > driver node but no driver that eventually produces any pci-bus > interface. > > Hence, PCI libqos tests cannot be run with aarch64 binary. > > This series brings the pieces needed to be able to run PCI tests > with the aarch64 binary: a generic-pcihost driver node gets > instantiated by the machine. This later contains a pci-bus-generic > driver which produces a pci-bus interface. Then all tests > consuming the pci-bus interface can be run with the libqos arm > virt machine. > > One of the first goal was to be able to run the virtio-iommu-pci > tests as the virtio-iommu was initially targetting ARM and it > was awkard to run the tests with the pc machine. This is now > possible. > > Only the tests doing hotplug cannot be run yet as hotplug is > not possible on the root bus. This will be dealt with separately > by adding a root port to the object tree. > > Best Regards > > Eric > > This series can be found at: > https://github.com/eauger/qemu/tree/libqos-pci-arm-v6 A gentle ping on this series. Now 5b4f72f5e86 ("tests/qtest: properly initialise the vring used idx") has landed and the all the enabled tests pass, Could someone please consider pulling it. I have rebased it on 907b5105f1b ("tests: move libqtest.h back under qtest") so now I hope everything is OK Thank you in advance Eric > > History > > v5 -> v6: > - change the libqtest.h header path after pull of > "tests: move libqtest.h back under qtest/" > > v4 -> v5: > - Added Alex' R-b > - Removed [PATCH v3 4/5] tests/qtest/vhost-user-blk-test: > Temporary hack to get tests passing on aarch64 > following Alex' fix > > v3 -> v4: > - handle endianess when accessing the cfg space (fix PPC64 > BE failure). Tested on such machine. > > v2 -> v3: > - force -cpu=max along with aarch64/virt > - reduced the vhost-user-block-pci issue workaround to a > single guest_alloc() instead of enabling MSIs. Call for > help on this specific issue. The 2 tests which fail are: > test_basic and indirect. > > v1 -> v2: > - copyright updated to 2022 > - QPCIBusARM renamed into QGenericPCIBus > - QGenericPCIHost declarations and definitions moved in the same > place as the generic pci implementation > - rename pci-arm.c/h in generic-pcihost.c/h and remove any ref to > ARM there > - remove qos_node_produces_opts, qpci_new_arm, qpci_free_arm > - ecam_alloc_ptr now is a field of QGenericPCIBus and not QPCIBus > - new libqos_init to create generic-pcihost driver that contains > pci-bus-generic > - QGenericPCIHost moved in the same place as the generic pci > bindings > - collected Thomas A-b/R-b > > Eric Auger (3): > tests/qtest/libqos/pci: Introduce pio_limit > tests/qtest/libqos: Skip hotplug tests if pci root bus is not > hotpluggable > tests/qtest/libqos: Add generic pci host bridge in arm-virt machine > > tests/qtest/e1000e-test.c | 6 + > tests/qtest/libqos/arm-virt-machine.c | 19 ++- > tests/qtest/libqos/generic-pcihost.c | 231 ++++++++++++++++++++++++++ > tests/qtest/libqos/generic-pcihost.h | 54 ++++++ > tests/qtest/libqos/meson.build | 1 + > tests/qtest/libqos/pci-pc.c | 1 + > tests/qtest/libqos/pci-spapr.c | 1 + > tests/qtest/libqos/pci.c | 78 +++++---- > tests/qtest/libqos/pci.h | 6 +- > tests/qtest/vhost-user-blk-test.c | 10 ++ > tests/qtest/virtio-blk-test.c | 5 + > tests/qtest/virtio-net-test.c | 5 + > tests/qtest/virtio-rng-test.c | 5 + > 13 files changed, 387 insertions(+), 35 deletions(-) > create mode 100644 tests/qtest/libqos/generic-pcihost.c > create mode 100644 tests/qtest/libqos/generic-pcihost.h >
Up to now the virt-machine node only contains a virtio-mmio driver node but no driver that eventually produces any pci-bus interface. Hence, PCI libqos tests cannot be run with aarch64 binary. This series brings the pieces needed to be able to run PCI tests with the aarch64 binary: a generic-pcihost driver node gets instantiated by the machine. This later contains a pci-bus-generic driver which produces a pci-bus interface. Then all tests consuming the pci-bus interface can be run with the libqos arm virt machine. One of the first goal was to be able to run the virtio-iommu-pci tests as the virtio-iommu was initially targetting ARM and it was awkard to run the tests with the pc machine. This is now possible. Only the tests doing hotplug cannot be run yet as hotplug is not possible on the root bus. This will be dealt with separately by adding a root port to the object tree. Best Regards Eric This series can be found at: https://github.com/eauger/qemu/tree/libqos-pci-arm-v6 History v5 -> v6: - change the libqtest.h header path after pull of "tests: move libqtest.h back under qtest/" v4 -> v5: - Added Alex' R-b - Removed [PATCH v3 4/5] tests/qtest/vhost-user-blk-test: Temporary hack to get tests passing on aarch64 following Alex' fix v3 -> v4: - handle endianess when accessing the cfg space (fix PPC64 BE failure). Tested on such machine. v2 -> v3: - force -cpu=max along with aarch64/virt - reduced the vhost-user-block-pci issue workaround to a single guest_alloc() instead of enabling MSIs. Call for help on this specific issue. The 2 tests which fail are: test_basic and indirect. v1 -> v2: - copyright updated to 2022 - QPCIBusARM renamed into QGenericPCIBus - QGenericPCIHost declarations and definitions moved in the same place as the generic pci implementation - rename pci-arm.c/h in generic-pcihost.c/h and remove any ref to ARM there - remove qos_node_produces_opts, qpci_new_arm, qpci_free_arm - ecam_alloc_ptr now is a field of QGenericPCIBus and not QPCIBus - new libqos_init to create generic-pcihost driver that contains pci-bus-generic - QGenericPCIHost moved in the same place as the generic pci bindings - collected Thomas A-b/R-b Eric Auger (3): tests/qtest/libqos/pci: Introduce pio_limit tests/qtest/libqos: Skip hotplug tests if pci root bus is not hotpluggable tests/qtest/libqos: Add generic pci host bridge in arm-virt machine tests/qtest/e1000e-test.c | 6 + tests/qtest/libqos/arm-virt-machine.c | 19 ++- tests/qtest/libqos/generic-pcihost.c | 231 ++++++++++++++++++++++++++ tests/qtest/libqos/generic-pcihost.h | 54 ++++++ tests/qtest/libqos/meson.build | 1 + tests/qtest/libqos/pci-pc.c | 1 + tests/qtest/libqos/pci-spapr.c | 1 + tests/qtest/libqos/pci.c | 78 +++++---- tests/qtest/libqos/pci.h | 6 +- tests/qtest/vhost-user-blk-test.c | 10 ++ tests/qtest/virtio-blk-test.c | 5 + tests/qtest/virtio-net-test.c | 5 + tests/qtest/virtio-rng-test.c | 5 + 13 files changed, 387 insertions(+), 35 deletions(-) create mode 100644 tests/qtest/libqos/generic-pcihost.c create mode 100644 tests/qtest/libqos/generic-pcihost.h