| Message ID | 20240605152832.11618-1-weifeng.liu.z@gmail.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | virtio-gpu: Enable virglrenderer backend for rutabaga | expand |
Weifeng Liu <weifeng.liu.z@gmail.com> writes: > Greetings, > > I'd like to introduce you my attempt to enable virglrenderer backend for > rutabaga empowered virtio-gpu device. I am aware that there have been > effort in supporting venus in virtio-gpu-virgl.c [1], but there is no > reason to prevent us from leveraging the virglrenderer component in > rutabaga_gfx, especially it being not very hard to add this > functionality. > > Generally, the gap is the polling capability, i.e., virglrenderer > requires the main thread (namely the GPU command handling thread) to > poll virglrenderer at proper moments, which is not yet supported in > virtio-gpu-rutabaga device. This patch set try to add this so that > virglrenderer backend (including virgl and venus) can work as expected. > > Slight change to rutabaga_gfx_ffi is also a requirement, which is > included in [2]. > > Further effort is required to tune the performance, since copying is > present before the rendered images get displayed. But I still think this > patch set could be a good starting point for the pending work. > > For those interested in setting up environment and playing around with > this patch set, here is guideline in brief: > > 1. Clone the master/main branch of virglrenderer, compile and install it. > > git clone https://gitlab.freedesktop.org/virgl/virglrenderer > cd virglrenderer > meson setup builddir \ > --prefix=$INSTALL_DIR/virglrenderer \ > -Dvenus=true > ninja -C builddir install > > 2. Clone the patched CrosVM, build and install rutabaga_gfx_ffi. > > git clone -b rutabaga_ffi_virgl https://github.com/phreer/crosvm.git > cd crosvm/rutabaga_gfx/ffi > export PKG_CONFIG_PATH=$INSTALL_DIR/virglrenderer/lib64/pkgconfig/ > meson setup builddir/ \ > --prefix $HOME/install/rutabaga_gfx/rutabaga_gfx_ffi/ \ > -Dvirglrenderer=true > ninja -C builddir install Is there a PR going in for this? The moving parts for rutabaga are complex enough I think we need support upstream before merging this. Is this branch where I should be getting the poll helpers from? cc -m64 @qemu-system-arm.rsp /usr/bin/ld: libcommon.fa.p/hw_display_virtio-gpu-rutabaga.c.o: in function `virtio_gpu_fence_poll': /home/alex/lsrc/qemu.git/builds/vulkan/../../hw/display/virtio-gpu-rutabaga.c:909: undefined reference to `rutabaga_poll' /usr/bin/ld: libcommon.fa.p/hw_display_virtio-gpu-rutabaga.c.o: in function `virtio_gpu_rutabaga_init': /home/alex/lsrc/qemu.git/builds/vulkan/../../hw/display/virtio-gpu-rutabaga.c:1122: undefined reference to `rutabaga_poll_descriptor' collect2: error: ld returned 1 exit status ninja: build stopped: subcommand failed. > 3. Applied this patch set to QEMU, build and install it: > > cd qemu > # Apply this patch set atop main branch ... > mkdir builddir; cd builddir > ../configure --prefix=$INSTALL_DIR/qemu \ > --target-list=x86_64-softmmu \ > --disable-virglrenderer \ > --enable-rutabaga_gfx > ninja -C builddir install > > 4. If you are lucky and everything goes fine, you are prepared to launch > VM with virglrenderer backed virtio-gpu-rutabaga device: > > export LD_LIBRARY_PATH=$INSTALL_DIR/virglrenderer/lib64/:$LD_LIBRARY_PATH > export LD_LIBRARY_PATH=$INSTALL_DIR/rutabaga_gfx_ffi/lib64/:$LD_LIBRARY_PATH > $INSTALL_DIR/qemu/bin/qemu-system-x86_64 > $QEMU -d guest_errors -enable-kvm -M q35 -smp 4 -m $MEM \ > -object memory-backend-memfd,id=mem1,size=$MEM \ > -machine memory-backend=mem1 \ > -device virtio-vga-rutabaga,venus=on,virgl2=on,wsi=surfaceless,hostmem=$MEM \ > This should go into docs/system/devices/virtio-gpu.rst with some explanation. Is there anything we need on the guest side or does this skip the encapsulating requirements of wayland? > Note: > > - You might need this patch set [3] to avoid KVM bad address error when > you are running on a GPU using TTM for memory management. > > [1] https://lore.kernel.org/all/dba6eb97-e1d1-4694-bfb6-e72db95715dd@daynix.com/T/ > [2] https://chromium-review.googlesource.com/c/crosvm/crosvm/+/5599645/1 > [3] https://lore.kernel.org/kvm/20240229025759.1187910-1-stevensd@google.com/ > > Weifeng Liu (3): > virtio-gpu: rutabaga: Properly set stride when copying resources > virtio-gpu: rutabaga: Poll rutabaga upon events > virtio-gpu: rutabaga: Add options to enable virgl and venus contexts > > hw/display/virtio-gpu-rutabaga.c | 104 ++++++++++++++++++++++++++++++- > include/hw/virtio/virtio-gpu.h | 1 + > 2 files changed, 104 insertions(+), 1 deletion(-)
Hi Alex, On Thu, 2024-06-06 at 11:43 +0100, Alex Bennée wrote: > Weifeng Liu <weifeng.liu.z@gmail.com> writes: > > > Greetings, > > > > I'd like to introduce you my attempt to enable virglrenderer backend for > > rutabaga empowered virtio-gpu device. I am aware that there have been > > effort in supporting venus in virtio-gpu-virgl.c [1], but there is no > > reason to prevent us from leveraging the virglrenderer component in > > rutabaga_gfx, especially it being not very hard to add this > > functionality. > > > > Generally, the gap is the polling capability, i.e., virglrenderer > > requires the main thread (namely the GPU command handling thread) to > > poll virglrenderer at proper moments, which is not yet supported in > > virtio-gpu-rutabaga device. This patch set try to add this so that > > virglrenderer backend (including virgl and venus) can work as expected. > > > > Slight change to rutabaga_gfx_ffi is also a requirement, which is > > included in [2]. > > > > Further effort is required to tune the performance, since copying is > > present before the rendered images get displayed. But I still think this > > patch set could be a good starting point for the pending work. > > > > For those interested in setting up environment and playing around with > > this patch set, here is guideline in brief: > > > > 1. Clone the master/main branch of virglrenderer, compile and install it. > > > > git clone https://gitlab.freedesktop.org/virgl/virglrenderer > > cd virglrenderer > > meson setup builddir \ > > --prefix=$INSTALL_DIR/virglrenderer \ > > -Dvenus=true > > ninja -C builddir install > > > > 2. Clone the patched CrosVM, build and install rutabaga_gfx_ffi. > > > > git clone -b rutabaga_ffi_virgl https://github.com/phreer/crosvm.git > > cd crosvm/rutabaga_gfx/ffi > > export PKG_CONFIG_PATH=$INSTALL_DIR/virglrenderer/lib64/pkgconfig/ > > meson setup builddir/ \ > > --prefix $HOME/install/rutabaga_gfx/rutabaga_gfx_ffi/ \ > > -Dvirglrenderer=true > > ninja -C builddir install > > Is there a PR going in for this? The moving parts for rutabaga are > complex enough I think we need support upstream before merging this. > It's true that this patch set depends on the change of rutabaga_gfx_ffi. I am trying get the modifications of crosvm/rubataga_gfx_ffi merged in upstream, please refer to this link: https://chromium-review.googlesource.com/c/crosvm/crosvm/+/5599645 > Is this branch where I should be getting the poll helpers from? > > cc -m64 @qemu-system-arm.rsp > /usr/bin/ld: libcommon.fa.p/hw_display_virtio-gpu-rutabaga.c.o: in function `virtio_gpu_fence_poll': > /home/alex/lsrc/qemu.git/builds/vulkan/../../hw/display/virtio-gpu-rutabaga.c:909: undefined reference to `rutabaga_poll' > /usr/bin/ld: libcommon.fa.p/hw_display_virtio-gpu-rutabaga.c.o: in function `virtio_gpu_rutabaga_init': > /home/alex/lsrc/qemu.git/builds/vulkan/../../hw/display/virtio-gpu-rutabaga.c:1122: undefined reference to `rutabaga_poll_descriptor' > collect2: error: ld returned 1 exit status > ninja: build stopped: subcommand failed. > The required patches are applied to the rutabaga_ffi_virgl branch of my clone of crosvm already, so please check out to that branch. > > > 3. Applied this patch set to QEMU, build and install it: > > > > cd qemu > > # Apply this patch set atop main branch ... > > mkdir builddir; cd builddir > > ../configure --prefix=$INSTALL_DIR/qemu \ > > --target-list=x86_64-softmmu \ > > --disable-virglrenderer \ > > --enable-rutabaga_gfx > > ninja -C builddir install > > > > 4. If you are lucky and everything goes fine, you are prepared to launch > > VM with virglrenderer backed virtio-gpu-rutabaga device: > > > > export LD_LIBRARY_PATH=$INSTALL_DIR/virglrenderer/lib64/:$LD_LIBRARY_PATH > > export LD_LIBRARY_PATH=$INSTALL_DIR/rutabaga_gfx_ffi/lib64/:$LD_LIBRARY_PATH > > $INSTALL_DIR/qemu/bin/qemu-system-x86_64 > > $QEMU -d guest_errors -enable-kvm -M q35 -smp 4 -m $MEM \ > > -object memory-backend-memfd,id=mem1,size=$MEM \ > > -machine memory-backend=mem1 \ > > -device virtio-vga-rutabaga,venus=on,virgl2=on,wsi=surfaceless,hostmem=$MEM \ > > > > This should go into docs/system/devices/virtio-gpu.rst with some > explanation. Is there anything we need on the guest side or does this > skip the encapsulating requirements of wayland? > Yeah, it's a good idea to add doc to explain the usage, thanks! Best regards, Weifeng > > Note: > > > > - You might need this patch set [3] to avoid KVM bad address error when > > you are running on a GPU using TTM for memory management. > > > > [1] https://lore.kernel.org/all/dba6eb97-e1d1-4694-bfb6-e72db95715dd@daynix.com/T/ > > [2] https://chromium-review.googlesource.com/c/crosvm/crosvm/+/5599645/1 > > [3] https://lore.kernel.org/kvm/20240229025759.1187910-1-stevensd@google.com/ > > > > Weifeng Liu (3): > > virtio-gpu: rutabaga: Properly set stride when copying resources > > virtio-gpu: rutabaga: Poll rutabaga upon events > > virtio-gpu: rutabaga: Add options to enable virgl and venus contexts > > > > hw/display/virtio-gpu-rutabaga.c | 104 ++++++++++++++++++++++++++++++- > > include/hw/virtio/virtio-gpu.h | 1 + > > 2 files changed, 104 insertions(+), 1 deletion(-) >
Weifeng Liu <weifeng.liu.z@gmail.com> writes: > Hi Alex, > > On Thu, 2024-06-06 at 11:43 +0100, Alex Bennée wrote: >> Weifeng Liu <weifeng.liu.z@gmail.com> writes: >> >> > Greetings, >> > >> > I'd like to introduce you my attempt to enable virglrenderer backend for >> > rutabaga empowered virtio-gpu device. I am aware that there have been >> > effort in supporting venus in virtio-gpu-virgl.c [1], but there is no >> > reason to prevent us from leveraging the virglrenderer component in >> > rutabaga_gfx, especially it being not very hard to add this >> > functionality. >> > >> > Generally, the gap is the polling capability, i.e., virglrenderer >> > requires the main thread (namely the GPU command handling thread) to >> > poll virglrenderer at proper moments, which is not yet supported in >> > virtio-gpu-rutabaga device. This patch set try to add this so that >> > virglrenderer backend (including virgl and venus) can work as expected. >> > >> > Slight change to rutabaga_gfx_ffi is also a requirement, which is >> > included in [2]. >> > >> > Further effort is required to tune the performance, since copying is >> > present before the rendered images get displayed. But I still think this >> > patch set could be a good starting point for the pending work. >> > >> > For those interested in setting up environment and playing around with >> > this patch set, here is guideline in brief: >> > >> > 1. Clone the master/main branch of virglrenderer, compile and install it. >> > >> > git clone https://gitlab.freedesktop.org/virgl/virglrenderer >> > cd virglrenderer >> > meson setup builddir \ >> > --prefix=$INSTALL_DIR/virglrenderer \ >> > -Dvenus=true >> > ninja -C builddir install >> > >> > 2. Clone the patched CrosVM, build and install rutabaga_gfx_ffi. >> > >> > git clone -b rutabaga_ffi_virgl https://github.com/phreer/crosvm.git >> > cd crosvm/rutabaga_gfx/ffi >> > export PKG_CONFIG_PATH=$INSTALL_DIR/virglrenderer/lib64/pkgconfig/ >> > meson setup builddir/ \ >> > --prefix $HOME/install/rutabaga_gfx/rutabaga_gfx_ffi/ \ >> > -Dvirglrenderer=true >> > ninja -C builddir install >> >> Is there a PR going in for this? The moving parts for rutabaga are >> complex enough I think we need support upstream before merging this. >> > > It's true that this patch set depends on the change of > rutabaga_gfx_ffi. I am trying get the modifications of > crosvm/rubataga_gfx_ffi merged in upstream, please refer to this link: > https://chromium-review.googlesource.com/c/crosvm/crosvm/+/5599645 > >> Is this branch where I should be getting the poll helpers from? >> >> cc -m64 @qemu-system-arm.rsp >> /usr/bin/ld: libcommon.fa.p/hw_display_virtio-gpu-rutabaga.c.o: in function `virtio_gpu_fence_poll': >> /home/alex/lsrc/qemu.git/builds/vulkan/../../hw/display/virtio-gpu-rutabaga.c:909: undefined reference to `rutabaga_poll' >> /usr/bin/ld: libcommon.fa.p/hw_display_virtio-gpu-rutabaga.c.o: in function `virtio_gpu_rutabaga_init': >> /home/alex/lsrc/qemu.git/builds/vulkan/../../hw/display/virtio-gpu-rutabaga.c:1122: undefined reference to `rutabaga_poll_descriptor' >> collect2: error: ld returned 1 exit status >> ninja: build stopped: subcommand failed. >> > > The required patches are applied to the rutabaga_ffi_virgl branch of my > clone of crosvm already, so please check out to that branch. I thought I had - maybe my install got polluted. I shall try again. > >> >> > 3. Applied this patch set to QEMU, build and install it: >> > >> > cd qemu >> > # Apply this patch set atop main branch ... >> > mkdir builddir; cd builddir >> > ../configure --prefix=$INSTALL_DIR/qemu \ >> > --target-list=x86_64-softmmu \ >> > --disable-virglrenderer \ >> > --enable-rutabaga_gfx >> > ninja -C builddir install >> > >> > 4. If you are lucky and everything goes fine, you are prepared to launch >> > VM with virglrenderer backed virtio-gpu-rutabaga device: >> > >> > export LD_LIBRARY_PATH=$INSTALL_DIR/virglrenderer/lib64/:$LD_LIBRARY_PATH >> > export LD_LIBRARY_PATH=$INSTALL_DIR/rutabaga_gfx_ffi/lib64/:$LD_LIBRARY_PATH >> > $INSTALL_DIR/qemu/bin/qemu-system-x86_64 >> > $QEMU -d guest_errors -enable-kvm -M q35 -smp 4 -m $MEM \ >> > -object memory-backend-memfd,id=mem1,size=$MEM \ >> > -machine memory-backend=mem1 \ >> > -device virtio-vga-rutabaga,venus=on,virgl2=on,wsi=surfaceless,hostmem=$MEM \ >> > >> >> This should go into docs/system/devices/virtio-gpu.rst with some >> explanation. Is there anything we need on the guest side or does this >> skip the encapsulating requirements of wayland? >> > > Yeah, it's a good idea to add doc to explain the usage, thanks! > > Best regards, > Weifeng > >> > Note: >> > >> > - You might need this patch set [3] to avoid KVM bad address error when >> > you are running on a GPU using TTM for memory management. >> > >> > [1] https://lore.kernel.org/all/dba6eb97-e1d1-4694-bfb6-e72db95715dd@daynix.com/T/ >> > [2] https://chromium-review.googlesource.com/c/crosvm/crosvm/+/5599645/1 >> > [3] https://lore.kernel.org/kvm/20240229025759.1187910-1-stevensd@google.com/ >> > >> > Weifeng Liu (3): >> > virtio-gpu: rutabaga: Properly set stride when copying resources >> > virtio-gpu: rutabaga: Poll rutabaga upon events >> > virtio-gpu: rutabaga: Add options to enable virgl and venus contexts >> > >> > hw/display/virtio-gpu-rutabaga.c | 104 ++++++++++++++++++++++++++++++- >> > include/hw/virtio/virtio-gpu.h | 1 + >> > 2 files changed, 104 insertions(+), 1 deletion(-) >>