mbox series

[v6,RESEND,0/5] Power11 support for QEMU [PSeries]

Message ID 20240731055022.696051-1-adityag@linux.ibm.com (mailing list archive)
Headers show
Series Power11 support for QEMU [PSeries] | expand

Message

Aditya Gupta July 31, 2024, 5:50 a.m. UTC
Overview
============

Split "Power11 support for QEMU" into 2 patch series: pseries & powernv.

This patch series is for pseries support for Power11.

As Power11 core is same as Power10, hence much of the code has been reused from
Power10.

Power11 was added in Linux in:
  commit c2ed087ed35c ("powerpc: Add Power11 architected and raw mode")

Git Tree for Testing
====================

QEMU: https://github.com/adi-g15-ibm/qemu/tree/p11-v6-pseries

Has been tested with following cases:
* '-M pseries' / '-M pseries -cpu Power11'
* '-smp' option tested
* with compat mode: 'max-cpu-compat=power10' and 'max-cpu-compat=power9'
* with/without device 'virtio-scsi-pci'
* with/without -kernel and -drive with qcow_file

Linux with Power11 support: https://github.com/torvalds/linux, since v6.9-rc1

Changelog
=========
v6 RESEND:
  + added my initials instead of PMM in patch #1 description

v6: 
  + reorganised patches such that Power11 introduction is at end, and
  cleanups and fixes is done before
  + patch #1: renamed macros from POWER_* to PCC_*
  + patch #2: rename 'logical_pvr' to 'spapr_logical_pvr' to better convey
  the context

v5:
  + split patch series into pseries+powernv
  + patch #1: apply harsh's patch to reduce duplication
  + patch #2: simplified, by removing duplication
  + patch #3: update docs, according to harsh's suggestion
  + patch #4: no functional change, #define used for P9 & P10 pcr_supported
  + patch #5: no change

v4:
  + patch #5: fix memory leak in pnv_chip_power10_quad_realize
  - no change in other patches

v3:
  + patch #1: version power11 as power11_v2.0
  + patch #2: split target hw/pseries code into patch #2
  + patch #3,#4: fix regression due to Power10 and Power11 having same PCR
  + patch #5: create pnv_chip_power11_dt_populate and split pnv_chip_power10_common_realize as per review
  + patch #6-#11: no change
  - remove commit to make Power11 as default

v2:
  + split powernv patch into homer,lpc,occ,psi,sbe
  + reduce code duplication by reusing power10 code
  + make power11 as default
  + rebase on qemu upstream/master
  + add more information in commit descriptions
  + update docs
  + update skiboot.lid


Aditya Gupta (4):
  target/ppc: Introduce 'PowerPCCPUClass::spapr_logical_pvr'
  target/ppc: Fix regression due to Power10 and Power11 having same PCR
  target/ppc: Add Power11 DD2.0 processor
  ppc/pseries: Add Power11 cpu type

Harsh Prateek Bora (1):
  target/ppc: Reduce code duplication across Power9/10 init code

 docs/system/ppc/pseries.rst |  17 +++-
 hw/ppc/spapr_cpu_core.c     |   1 +
 target/ppc/compat.c         |  11 +++
 target/ppc/cpu-models.c     |   3 +
 target/ppc/cpu-models.h     |   3 +
 target/ppc/cpu.h            |   3 +
 target/ppc/cpu_init.c       | 188 +++++++++++++++---------------------
 target/ppc/cpu_init.h       |  92 ++++++++++++++++++
 8 files changed, 205 insertions(+), 113 deletions(-)
 create mode 100644 target/ppc/cpu_init.h

Comments

Aditya Gupta Aug. 20, 2024, 10:34 a.m. UTC | #1
Hi,

Any comments on this ?


Thanks,

Aditya Gupta


On 31/07/24 11:20, Aditya Gupta wrote:
> Overview
> ============
>
> Split "Power11 support for QEMU" into 2 patch series: pseries & powernv.
>
> This patch series is for pseries support for Power11.
>
> As Power11 core is same as Power10, hence much of the code has been reused from
> Power10.
>
> Power11 was added in Linux in:
>    commit c2ed087ed35c ("powerpc: Add Power11 architected and raw mode")
>
> Git Tree for Testing
> ====================
>
> QEMU: https://github.com/adi-g15-ibm/qemu/tree/p11-v6-pseries
>
> Has been tested with following cases:
> * '-M pseries' / '-M pseries -cpu Power11'
> * '-smp' option tested
> * with compat mode: 'max-cpu-compat=power10' and 'max-cpu-compat=power9'
> * with/without device 'virtio-scsi-pci'
> * with/without -kernel and -drive with qcow_file
>
> Linux with Power11 support: https://github.com/torvalds/linux, since v6.9-rc1
>
> Changelog
> =========
> v6 RESEND:
>    + added my initials instead of PMM in patch #1 description
>
> v6:
>    + reorganised patches such that Power11 introduction is at end, and
>    cleanups and fixes is done before
>    + patch #1: renamed macros from POWER_* to PCC_*
>    + patch #2: rename 'logical_pvr' to 'spapr_logical_pvr' to better convey
>    the context
>
> v5:
>    + split patch series into pseries+powernv
>    + patch #1: apply harsh's patch to reduce duplication
>    + patch #2: simplified, by removing duplication
>    + patch #3: update docs, according to harsh's suggestion
>    + patch #4: no functional change, #define used for P9 & P10 pcr_supported
>    + patch #5: no change
>
> v4:
>    + patch #5: fix memory leak in pnv_chip_power10_quad_realize
>    - no change in other patches
>
> v3:
>    + patch #1: version power11 as power11_v2.0
>    + patch #2: split target hw/pseries code into patch #2
>    + patch #3,#4: fix regression due to Power10 and Power11 having same PCR
>    + patch #5: create pnv_chip_power11_dt_populate and split pnv_chip_power10_common_realize as per review
>    + patch #6-#11: no change
>    - remove commit to make Power11 as default
>
> v2:
>    + split powernv patch into homer,lpc,occ,psi,sbe
>    + reduce code duplication by reusing power10 code
>    + make power11 as default
>    + rebase on qemu upstream/master
>    + add more information in commit descriptions
>    + update docs
>    + update skiboot.lid
>
>
> Aditya Gupta (4):
>    target/ppc: Introduce 'PowerPCCPUClass::spapr_logical_pvr'
>    target/ppc: Fix regression due to Power10 and Power11 having same PCR
>    target/ppc: Add Power11 DD2.0 processor
>    ppc/pseries: Add Power11 cpu type
>
> Harsh Prateek Bora (1):
>    target/ppc: Reduce code duplication across Power9/10 init code
>
>   docs/system/ppc/pseries.rst |  17 +++-
>   hw/ppc/spapr_cpu_core.c     |   1 +
>   target/ppc/compat.c         |  11 +++
>   target/ppc/cpu-models.c     |   3 +
>   target/ppc/cpu-models.h     |   3 +
>   target/ppc/cpu.h            |   3 +
>   target/ppc/cpu_init.c       | 188 +++++++++++++++---------------------
>   target/ppc/cpu_init.h       |  92 ++++++++++++++++++
>   8 files changed, 205 insertions(+), 113 deletions(-)
>   create mode 100644 target/ppc/cpu_init.h
>
Amit Machhiwal Aug. 29, 2024, 12:19 p.m. UTC | #2
Hi Aditya,

On 2024/07/31 11:20 AM, Aditya Gupta wrote:
> Overview
> ============
> 
> Split "Power11 support for QEMU" into 2 patch series: pseries & powernv.
> 
> This patch series is for pseries support for Power11.
> 
> As Power11 core is same as Power10, hence much of the code has been reused from
> Power10.
> 
> Power11 was added in Linux in:
>   commit c2ed087ed35c ("powerpc: Add Power11 architected and raw mode")
> 
> Git Tree for Testing
> ====================
> 
> QEMU: https://github.com/adi-g15-ibm/qemu/tree/p11-v6-pseries
> 
> Has been tested with following cases:
> * '-M pseries' / '-M pseries -cpu Power11'

I tried the below command with mailine QEMU and this patch series applied. I
could boot the guest with -cpu Power11 option but when I check inside the guest
with `lscpu`, I can still see the Model name being reported as "Power 10" while
the PVR value looks fine corresponding to Power11.

Did you see "Power 11" while you were testing this?

  $ qemu-system-ppc64 -m 4G -smp 4 -nographic -drive file=/root/testing/debian-12-generic-ppc64el.qcow2,format=qcow2 -accel tcg -cpu Power11

  root@localhost:~# lscpu
  Architecture:             ppc64le
    Byte Order:             Little Endian
  CPU(s):                   4
    On-line CPU(s) list:    0-3
  Model name:               POWER10 (architected), altivec supported
    Model:                  18.0 (pvr 0082 1200)

Thanks,
Amit

> * '-smp' option tested
> * with compat mode: 'max-cpu-compat=power10' and 'max-cpu-compat=power9'
> * with/without device 'virtio-scsi-pci'
> * with/without -kernel and -drive with qcow_file
> 
> Linux with Power11 support: https://github.com/torvalds/linux, since v6.9-rc1
> 
> Changelog
> =========
> v6 RESEND:
>   + added my initials instead of PMM in patch #1 description
> 
> v6: 
>   + reorganised patches such that Power11 introduction is at end, and
>   cleanups and fixes is done before
>   + patch #1: renamed macros from POWER_* to PCC_*
>   + patch #2: rename 'logical_pvr' to 'spapr_logical_pvr' to better convey
>   the context
> 
> v5:
>   + split patch series into pseries+powernv
>   + patch #1: apply harsh's patch to reduce duplication
>   + patch #2: simplified, by removing duplication
>   + patch #3: update docs, according to harsh's suggestion
>   + patch #4: no functional change, #define used for P9 & P10 pcr_supported
>   + patch #5: no change
> 
> v4:
>   + patch #5: fix memory leak in pnv_chip_power10_quad_realize
>   - no change in other patches
> 
> v3:
>   + patch #1: version power11 as power11_v2.0
>   + patch #2: split target hw/pseries code into patch #2
>   + patch #3,#4: fix regression due to Power10 and Power11 having same PCR
>   + patch #5: create pnv_chip_power11_dt_populate and split pnv_chip_power10_common_realize as per review
>   + patch #6-#11: no change
>   - remove commit to make Power11 as default
> 
> v2:
>   + split powernv patch into homer,lpc,occ,psi,sbe
>   + reduce code duplication by reusing power10 code
>   + make power11 as default
>   + rebase on qemu upstream/master
>   + add more information in commit descriptions
>   + update docs
>   + update skiboot.lid
> 
> 
> Aditya Gupta (4):
>   target/ppc: Introduce 'PowerPCCPUClass::spapr_logical_pvr'
>   target/ppc: Fix regression due to Power10 and Power11 having same PCR
>   target/ppc: Add Power11 DD2.0 processor
>   ppc/pseries: Add Power11 cpu type
> 
> Harsh Prateek Bora (1):
>   target/ppc: Reduce code duplication across Power9/10 init code
> 
>  docs/system/ppc/pseries.rst |  17 +++-
>  hw/ppc/spapr_cpu_core.c     |   1 +
>  target/ppc/compat.c         |  11 +++
>  target/ppc/cpu-models.c     |   3 +
>  target/ppc/cpu-models.h     |   3 +
>  target/ppc/cpu.h            |   3 +
>  target/ppc/cpu_init.c       | 188 +++++++++++++++---------------------
>  target/ppc/cpu_init.h       |  92 ++++++++++++++++++
>  8 files changed, 205 insertions(+), 113 deletions(-)
>  create mode 100644 target/ppc/cpu_init.h
> 
> -- 
> 2.45.2
> 
>
Amit Machhiwal Sept. 2, 2024, 5:49 a.m. UTC | #3
On 2024/07/31 11:20 AM, Aditya Gupta wrote:
> Overview
> ============
> 
> Split "Power11 support for QEMU" into 2 patch series: pseries & powernv.
> 
> This patch series is for pseries support for Power11.
> 
> As Power11 core is same as Power10, hence much of the code has been reused from
> Power10.
> 
> Power11 was added in Linux in:
>   commit c2ed087ed35c ("powerpc: Add Power11 architected and raw mode")
> 
> Git Tree for Testing
> ====================
> 
> QEMU: https://github.com/adi-g15-ibm/qemu/tree/p11-v6-pseries
> 
> Has been tested with following cases:
> * '-M pseries' / '-M pseries -cpu Power11'
>

I could boot a Power11 pseries KVM guest with this patch series applied which
does not work without it.

Command Used:

 qemu-system-ppc64 -m 4G -smp 4 -nographic -drive file=/root/testing/debian-12-generic-ppc64el.qcow2,format=qcow2 -accel tcg -cpu Power11

Tested-by: Amit Machhiwal <amachhiw@linux.ibm.com>

> * '-smp' option tested
> * with compat mode: 'max-cpu-compat=power10' and 'max-cpu-compat=power9'
> * with/without device 'virtio-scsi-pci'
> * with/without -kernel and -drive with qcow_file
> 
> Linux with Power11 support: https://github.com/torvalds/linux, since v6.9-rc1
> 
> Changelog
> =========
> v6 RESEND:
>   + added my initials instead of PMM in patch #1 description
> 
> v6: 
>   + reorganised patches such that Power11 introduction is at end, and
>   cleanups and fixes is done before
>   + patch #1: renamed macros from POWER_* to PCC_*
>   + patch #2: rename 'logical_pvr' to 'spapr_logical_pvr' to better convey
>   the context
> 
> v5:
>   + split patch series into pseries+powernv
>   + patch #1: apply harsh's patch to reduce duplication
>   + patch #2: simplified, by removing duplication
>   + patch #3: update docs, according to harsh's suggestion
>   + patch #4: no functional change, #define used for P9 & P10 pcr_supported
>   + patch #5: no change
> 
> v4:
>   + patch #5: fix memory leak in pnv_chip_power10_quad_realize
>   - no change in other patches
> 
> v3:
>   + patch #1: version power11 as power11_v2.0
>   + patch #2: split target hw/pseries code into patch #2
>   + patch #3,#4: fix regression due to Power10 and Power11 having same PCR
>   + patch #5: create pnv_chip_power11_dt_populate and split pnv_chip_power10_common_realize as per review
>   + patch #6-#11: no change
>   - remove commit to make Power11 as default
> 
> v2:
>   + split powernv patch into homer,lpc,occ,psi,sbe
>   + reduce code duplication by reusing power10 code
>   + make power11 as default
>   + rebase on qemu upstream/master
>   + add more information in commit descriptions
>   + update docs
>   + update skiboot.lid
> 
> 
> Aditya Gupta (4):
>   target/ppc: Introduce 'PowerPCCPUClass::spapr_logical_pvr'
>   target/ppc: Fix regression due to Power10 and Power11 having same PCR
>   target/ppc: Add Power11 DD2.0 processor
>   ppc/pseries: Add Power11 cpu type
> 
> Harsh Prateek Bora (1):
>   target/ppc: Reduce code duplication across Power9/10 init code
> 
>  docs/system/ppc/pseries.rst |  17 +++-
>  hw/ppc/spapr_cpu_core.c     |   1 +
>  target/ppc/compat.c         |  11 +++
>  target/ppc/cpu-models.c     |   3 +
>  target/ppc/cpu-models.h     |   3 +
>  target/ppc/cpu.h            |   3 +
>  target/ppc/cpu_init.c       | 188 +++++++++++++++---------------------
>  target/ppc/cpu_init.h       |  92 ++++++++++++++++++
>  8 files changed, 205 insertions(+), 113 deletions(-)
>  create mode 100644 target/ppc/cpu_init.h
> 
> -- 
> 2.45.2
> 
>
Aditya Gupta Sept. 2, 2024, 8:57 a.m. UTC | #4
Hi Amit,

On 02/09/24 11:19, Amit Machhiwal wrote:
> On 2024/07/31 11:20 AM, Aditya Gupta wrote:
>> <...snip...>
>>
>> Git Tree for Testing
>> ====================
>>
>> QEMU: https://github.com/adi-g15-ibm/qemu/tree/p11-v6-pseries
>>
>> Has been tested with following cases:
>> * '-M pseries' / '-M pseries -cpu Power11'
>>
> I could boot a Power11 pseries KVM guest with this patch series applied which
> does not work without it.
>
> Command Used:
>
>   qemu-system-ppc64 -m 4G -smp 4 -nographic -drive file=/root/testing/debian-12-generic-ppc64el.qcow2,format=qcow2 -accel tcg -cpu Power11
>
> Tested-by: Amit Machhiwal <amachhiw@linux.ibm.com>

Thanks for testing it, Amit !


- Aditya Gupta