[for-9.2,v6,0/9] virtio-net: add support for SR-IOV emulation

Message

Akihiko Odaki Aug. 2, 2024, 6:49 a.m. UTC

Based-on: <[e-mail]>
("[PATCH for-9.2 v11 00/11] hw/pci: SR-IOV related fixes and improvements")

Introduction
------------

This series is based on the RFC series submitted by Yui Washizu[1].
See also [2] for the context.

This series enables SR-IOV emulation for virtio-net. It is useful
to test SR-IOV support on the guest, or to expose several vDPA devices
in a VM. vDPA devices can also provide L2 switching feature for
offloading though it is out of scope to allow the guest to configure
such a feature.

The PF side code resides in virtio-pci. The VF side code resides in
the PCI common infrastructure, but it is restricted to work only for
virtio-net-pci because of lack of validation.

User Interface
--------------

A user can configure a SR-IOV capable virtio-net device by adding
virtio-net-pci functions to a bus. Below is a command line example:
  -netdev user,id=n -netdev user,id=o
  -netdev user,id=p -netdev user,id=q
  -device pcie-root-port,id=b
  -device virtio-net-pci,bus=b,addr=0x0.0x3,netdev=q,sriov-pf=f
  -device virtio-net-pci,bus=b,addr=0x0.0x2,netdev=p,sriov-pf=f
  -device virtio-net-pci,bus=b,addr=0x0.0x1,netdev=o,sriov-pf=f
  -device virtio-net-pci,bus=b,addr=0x0.0x0,netdev=n,id=f

The VFs specify the paired PF with "sriov-pf" property. The PF must be
added after all VFs. It is user's responsibility to ensure that VFs have
function numbers larger than one of the PF, and the function numbers
have a consistent stride.

Keeping VF instances
--------------------

A problem with SR-IOV emulation is that it needs to hotplug the VFs as
the guest requests. Previously, this behavior was implemented by
realizing and unrealizing VFs at runtime. However, this strategy does
not work well for the proposed virtio-net emulation; in this proposal,
device options passed in the command line must be maintained as VFs
are hotplugged, but they are consumed when the machine starts and not
available after that, which makes realizing VFs at runtime impossible.

As an strategy alternative to runtime realization/unrealization, this
series proposes to reuse the code to power down PCI Express devices.
When a PCI Express device is powered down, it will be hidden from the
guest but will be kept realized. This effectively implements the
behavior we need for the SR-IOV emulation.

Summary
-------

Patch 1 disables ROM BAR, which virtio-net-pci enables by default, for
VFs.
Patch 2 makes zero stride valid for 1 VF configuration.
Patch 3 and 4 adds validations.
Patch 5 adds user-created SR-IOV VF infrastructure.
Patch 6 makes virtio-pci work as SR-IOV PF for user-created VFs.
Patch 7 allows user to create SR-IOV VFs with virtio-net-pci.

[1] https://patchew.org/QEMU/[e-mail]/
[2] https://lore.kernel.org/all/[e-mail]/

Co-developed-by: Yui Washizu <[e-mail]>
Signed-off-by: Akihiko Odaki <[e-mail]>
---
Changes in v6:
- Added ARI extended capability.
- Rebased.
- Link to v5: https://lore.kernel.org/r/[e-mail]

Changes in v5:
- Dropped the RFC tag.
- Fixed device unrealization.
- Rebased.
- Link to v4: https://lore.kernel.org/r/[e-mail]

Changes in v4:
- Added patch "hw/pci: Fix SR-IOV VF number calculation" to fix division
  by zero reported by Yui Washizu.
- Rebased.
- Link to v3: https://lore.kernel.org/r/[e-mail]

Changes in v3:
- Rebased.
- Link to v2: https://lore.kernel.org/r/[e-mail]

Changes in v2:
- Changed to keep VF instances.
- Link to v1: https://lore.kernel.org/r/[e-mail]

---
Akihiko Odaki (9):
      hw/pci: Do not add ROM BAR for SR-IOV VF
      hw/pci: Fix SR-IOV VF number calculation
      pcie_sriov: Ensure PF and VF are mutually exclusive
      pcie_sriov: Check PCI Express for SR-IOV PF
      pcie_sriov: Allow user to create SR-IOV device
      virtio-pci: Implement SR-IOV PF
      virtio-net: Implement SR-IOV VF
      docs: Document composable SR-IOV device
      pcie_sriov: Make a PCI device with user-created VF ARI-capable

 MAINTAINERS                    |   1 +
 docs/system/index.rst          |   1 +
 docs/system/sriov.rst          |  37 +++++
 include/hw/pci/pci_device.h    |   6 +-
 include/hw/pci/pcie_sriov.h    |  21 +++
 include/hw/virtio/virtio-pci.h |   1 +
 hw/pci/pci.c                   |  76 ++++++----
 hw/pci/pcie_sriov.c            | 308 +++++++++++++++++++++++++++++++++--------
 hw/virtio/virtio-net-pci.c     |   1 +
 hw/virtio/virtio-pci.c         |  24 +++-
 10 files changed, 384 insertions(+), 92 deletions(-)
---
base-commit: 33809cc29cb8ba9de56c135ab78e4b9518f3fcb4
change-id: 20231202-sriov-9402fb262be8

Best regards,