[for-9.2,v13,00/12] hw/pci: SR-IOV related fixes and improvements

Message

Akihiko Odaki Aug. 5, 2024, 9:58 a.m. UTC

Supersedes: <[e-mail]>
("[PATCH v2 0/4] hw/pci: Convert rom_bar into OnOffAuto")

I submitted a RFC series[1] to add support for SR-IOV emulation to
virtio-net-pci. During the development of the series, I fixed some
trivial bugs and made improvements that I think are independently
useful. This series extracts those fixes and improvements from the RFC
series.

[1]: https://patchew.org/QEMU/[e-mail]/

Signed-off-by: Akihiko Odaki <[e-mail]>
---
Changes in v13:
- Added patch "s390x/pci: Check for multifunction after device
  realization". I found SR-IOV devices, which are multifunction devices,
  are not supposed to work at all with s390x on QEMU.
- Link to v12: https://lore.kernel.org/r/[e-mail]

Changes in v12:
- Changed to ignore invalid PCI_SRIOV_NUM_VF writes as done for
  PCI_SRIOV_CTRL_VFE.
- Updated the message for patch "hw/pci: Use -1 as the default value for
  rombar". (Markus Armbruster)
- Link to v11: https://lore.kernel.org/r/[e-mail]

Changes in v11:
- Rebased.
- Dropped patch "hw/pci: Convert rom_bar into OnOffAuto".
- Added patch "hw/pci: Use -1 as the default value for rombar".
- Added for-9.2 to give a testing period for possible breakage with
  libvirt/s390x.
- Link to v10: https://lore.kernel.org/r/[e-mail]

Changes in v10:
- Added patch "hw/ppc/spapr_pci: Do not reject VFs created after a PF".
- Added patch "hw/ppc/spapr_pci: Do not create DT for disabled PCI device".
- Added patch "hw/pci: Convert rom_bar into OnOffAuto".
- Dropped patch "hw/pci: Determine if rombar is explicitly enabled".
- Dropped patch "hw/qdev: Remove opts member".
- Link to v9: https://lore.kernel.org/r/[e-mail]

Changes in v9:
- Rebased.
- Restored '#include "qapi/error.h"' (Michael S. Tsirkin)
- Added patch "pcie_sriov: Ensure VF function number does not overflow"
  to fix abortion with wrong PF addr.
- Link to v8: https://lore.kernel.org/r/[e-mail]

Changes in v8:
- Clarified that "hw/pci: Replace -1 with UINT32_MAX for romsize" is
  not a bug fix. (Markus Armbruster)
- Squashed patch "vfio: Avoid inspecting option QDict for rombar" into
  "hw/pci: Determine if rombar is explicitly enabled".
  (Markus Armbruster)
- Noted the minor semantics change for patch "hw/pci: Determine if
  rombar is explicitly enabled". (Markus Armbruster)
- Link to v7: https://lore.kernel.org/r/[e-mail]

Changes in v7:
- Replaced -1 with UINT32_MAX when expressing uint32_t.
  (Markus Armbruster)
- Added patch "hw/pci: Replace -1 with UINT32_MAX for romsize".
- Link to v6: https://lore.kernel.org/r/[e-mail]

Changes in v6:
- Fixed migration.
- Added patch "pcie_sriov: Do not manually unrealize".
- Restored patch "pcie_sriov: Release VFs failed to realize" that was
  missed in v5.
- Link to v5: https://lore.kernel.org/r/[e-mail]

Changes in v5:
- Added patch "hw/pci: Always call pcie_sriov_pf_reset()".
- Added patch "pcie_sriov: Reset SR-IOV extended capability".
- Removed a reference to PCI_SRIOV_CTRL_VFE in hw/nvme.
  (Michael S. Tsirkin)
- Noted the impact on the guest of patch "pcie_sriov: Do not reset
  NumVFs after unregistering VFs". (Michael S. Tsirkin)
- Changed to use pcie_sriov_num_vfs().
- Restored pci_set_power() and changed it to call pci_set_enabled() only
  for PFs with an expalanation. (Michael S. Tsirkin)
- Reordered patches.
- Link to v4: https://lore.kernel.org/r/[e-mail]

Changes in v4:
- Reverted the change to pci_rom_bar_explicitly_enabled().
  (Michael S. Tsirkin)
- Added patch "pcie_sriov: Do not reset NumVFs after unregistering VFs".
- Added patch "hw/nvme: Refer to dev->exp.sriov_pf.num_vfs".
- Link to v3: https://lore.kernel.org/r/[e-mail]

Changes in v3:
- Extracted patch "hw/pci: Use -1 as a default value for rombar" from
  patch "hw/pci: Determine if rombar is explicitly enabled"
  (Philippe Mathieu-Daudé)
- Added an audit result of PCIDevice::rom_bar to the message of patch
  "hw/pci: Use -1 as a default value for rombar"
  (Philippe Mathieu-Daudé)
- Link to v2: https://lore.kernel.org/r/[e-mail]

Changes in v2:
- Reset after enabling a function so that NVMe VF state gets updated.
- Link to v1: https://lore.kernel.org/r/[e-mail]

---
Akihiko Odaki (12):
      hw/pci: Rename has_power to enabled
      hw/ppc/spapr_pci: Do not create DT for disabled PCI device
      hw/ppc/spapr_pci: Do not reject VFs created after a PF
      s390x/pci: Check for multifunction after device realization
      pcie_sriov: Do not manually unrealize
      pcie_sriov: Ensure VF function number does not overflow
      pcie_sriov: Reuse SR-IOV VF device instances
      pcie_sriov: Release VFs failed to realize
      pcie_sriov: Remove num_vfs from PCIESriovPF
      pcie_sriov: Register VFs after migration
      hw/pci: Use -1 as the default value for rombar
      hw/qdev: Remove opts member

 docs/pcie_sriov.txt         |   8 ++-
 include/hw/pci/pci.h        |   2 +-
 include/hw/pci/pci_device.h |  19 ++++-
 include/hw/pci/pcie_sriov.h |   9 +--
 include/hw/qdev-core.h      |   4 --
 hw/core/qdev.c              |   1 -
 hw/net/igb.c                |  13 +++-
 hw/nvme/ctrl.c              |  24 ++++---
 hw/pci/pci.c                |  23 +++---
 hw/pci/pci_host.c           |   4 +-
 hw/pci/pcie_sriov.c         | 165 +++++++++++++++++++++++++-------------------
 hw/ppc/spapr_pci.c          |   8 ++-
 hw/s390x/s390-pci-bus.c     |  14 ++--
 hw/vfio/pci.c               |   5 +-
 system/qdev-monitor.c       |  12 ++--
 hw/pci/trace-events         |   2 +-
 16 files changed, 187 insertions(+), 126 deletions(-)
---
base-commit: 31669121a01a14732f57c49400bc239cf9fd505f
change-id: 20240129-reuse-faae22b11934

Best regards,