| Message ID | 20240923093016.66437-1-shentey@gmail.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | E500 Cleanup | expand |
Hello Bernhard, On 9/23/24 11:29, Bernhard Beschow wrote: > This series is part of a bigger series exploring data-driven machine creation > using device tree blobs on top of the e500 machines [1]. It contains patches to > make this exploration easier which are also expected to provide value in > themselves. > > The cleanup starts with the e500 machine class itself, then proceeds with > machine-specific device models and concludes with more or less loosely related > devices. Device cleanup mostly consists of using the DEFINE_TYPES() macro. Since you recently took a look at the machine models, would you be willing to take over maintenance of the e500 ? It shouldn't be an enormous amount of work. Thanks, C. > [1] https://github.com/shentok/qemu/tree/e500-fdt > > Bernhard Beschow (23): > hw/ppc/e500: Do not leak struct boot_info > hw/ppc/e500: Reduce scope of env pointer > hw/ppc/e500: Prefer QOM cast > hw/ppc/e500: Remove unused "irqs" parameter > hw/ppc/e500: Add missing device tree properties to i2c controller node > hw/ppc/e500: Use SysBusDevice API to access TYPE_CCSR's internal > resources > hw/ppc/e500: Extract ppce500_ccsr.c > hw/ppc/ppce500_ccsr: Log access to unimplemented registers > hw/ppc/mpc8544_guts: Populate POR PLL ratio status register > hw/i2c/mpc_i2c: Convert DPRINTF to trace events for register access > hw/i2c/mpc_i2c: Prefer DEFINE_TYPES() macro > hw/pci-host/ppce500: Reuse TYPE_PPC_E500_PCI_BRIDGE define > hw/pci-host/ppce500: Prefer DEFINE_TYPES() macro > hw/gpio/mpc8xxx: Prefer DEFINE_TYPES() macro > hw/ppc/mpc8544_guts: Prefer DEFINE_TYPES() macro > hw/net/fsl_etsec/etsec: Prefer DEFINE_TYPES() macro > hw/intc: Guard openpic_kvm.c by dedicated OPENPIC_KVM Kconfig switch > hw/sd/sdhci: Prefer DEFINE_TYPES() macro > hw/block/pflash_cfi01: Prefer DEFINE_TYPES() macro > hw/i2c/smbus_eeprom: Prefer DEFINE_TYPES() macro > hw/rtc/ds1338: Prefer DEFINE_TYPES() macro > hw/usb/hcd-ehci-sysbus: Prefer DEFINE_TYPES() macro > hw/vfio/platform: Let vfio_start_eventfd_injection() take > VFIOPlatformDevice pointer > > MAINTAINERS | 2 +- > hw/ppc/e500-ccsr.h | 2 + > hw/ppc/e500.h | 8 +++ > hw/block/pflash_cfi01.c | 21 +++---- > hw/gpio/mpc8xxx.c | 22 +++----- > hw/i2c/mpc_i2c.c | 29 +++++----- > hw/i2c/smbus_eeprom.c | 19 +++---- > hw/net/fsl_etsec/etsec.c | 22 +++----- > hw/pci-host/ppce500.c | 54 ++++++++---------- > hw/ppc/e500.c | 61 +++++--------------- > hw/ppc/mpc8544_guts.c | 32 +++++++---- > hw/ppc/ppce500_ccsr.c | 67 ++++++++++++++++++++++ > hw/rtc/ds1338.c | 20 +++---- > hw/sd/sdhci.c | 62 +++++++++----------- > hw/usb/hcd-ehci-sysbus.c | 118 +++++++++++++++++---------------------- > hw/vfio/platform.c | 7 +-- > hw/i2c/trace-events | 5 ++ > hw/intc/Kconfig | 4 ++ > hw/intc/meson.build | 3 +- > hw/ppc/meson.build | 1 + > hw/ppc/trace-events | 3 + > 21 files changed, 285 insertions(+), 277 deletions(-) > create mode 100644 hw/ppc/ppce500_ccsr.c >
Am 23. September 2024 20:23:54 UTC schrieb "Cédric Le Goater" <clg@redhat.com>: >Hello Bernhard, Hi Cédric, > >On 9/23/24 11:29, Bernhard Beschow wrote: >> This series is part of a bigger series exploring data-driven machine creation >> using device tree blobs on top of the e500 machines [1]. It contains patches to >> make this exploration easier which are also expected to provide value in >> themselves. >> >> The cleanup starts with the e500 machine class itself, then proceeds with >> machine-specific device models and concludes with more or less loosely related >> devices. Device cleanup mostly consists of using the DEFINE_TYPES() macro. > >Since you recently took a look at the machine models, would you >be willing to take over maintenance of the e500 ? It shouldn't >be an enormous amount of work. Are you referring to the machine and related devices or the CPU? I'm somewhat familiar with the P102x and could take over but the CPU would be a different beast. Best regards, Bernhard > >Thanks, > >C. > > > >> [1] https://github.com/shentok/qemu/tree/e500-fdt >> >> Bernhard Beschow (23): >> hw/ppc/e500: Do not leak struct boot_info >> hw/ppc/e500: Reduce scope of env pointer >> hw/ppc/e500: Prefer QOM cast >> hw/ppc/e500: Remove unused "irqs" parameter >> hw/ppc/e500: Add missing device tree properties to i2c controller node >> hw/ppc/e500: Use SysBusDevice API to access TYPE_CCSR's internal >> resources >> hw/ppc/e500: Extract ppce500_ccsr.c >> hw/ppc/ppce500_ccsr: Log access to unimplemented registers >> hw/ppc/mpc8544_guts: Populate POR PLL ratio status register >> hw/i2c/mpc_i2c: Convert DPRINTF to trace events for register access >> hw/i2c/mpc_i2c: Prefer DEFINE_TYPES() macro >> hw/pci-host/ppce500: Reuse TYPE_PPC_E500_PCI_BRIDGE define >> hw/pci-host/ppce500: Prefer DEFINE_TYPES() macro >> hw/gpio/mpc8xxx: Prefer DEFINE_TYPES() macro >> hw/ppc/mpc8544_guts: Prefer DEFINE_TYPES() macro >> hw/net/fsl_etsec/etsec: Prefer DEFINE_TYPES() macro >> hw/intc: Guard openpic_kvm.c by dedicated OPENPIC_KVM Kconfig switch >> hw/sd/sdhci: Prefer DEFINE_TYPES() macro >> hw/block/pflash_cfi01: Prefer DEFINE_TYPES() macro >> hw/i2c/smbus_eeprom: Prefer DEFINE_TYPES() macro >> hw/rtc/ds1338: Prefer DEFINE_TYPES() macro >> hw/usb/hcd-ehci-sysbus: Prefer DEFINE_TYPES() macro >> hw/vfio/platform: Let vfio_start_eventfd_injection() take >> VFIOPlatformDevice pointer >> >> MAINTAINERS | 2 +- >> hw/ppc/e500-ccsr.h | 2 + >> hw/ppc/e500.h | 8 +++ >> hw/block/pflash_cfi01.c | 21 +++---- >> hw/gpio/mpc8xxx.c | 22 +++----- >> hw/i2c/mpc_i2c.c | 29 +++++----- >> hw/i2c/smbus_eeprom.c | 19 +++---- >> hw/net/fsl_etsec/etsec.c | 22 +++----- >> hw/pci-host/ppce500.c | 54 ++++++++---------- >> hw/ppc/e500.c | 61 +++++--------------- >> hw/ppc/mpc8544_guts.c | 32 +++++++---- >> hw/ppc/ppce500_ccsr.c | 67 ++++++++++++++++++++++ >> hw/rtc/ds1338.c | 20 +++---- >> hw/sd/sdhci.c | 62 +++++++++----------- >> hw/usb/hcd-ehci-sysbus.c | 118 +++++++++++++++++---------------------- >> hw/vfio/platform.c | 7 +-- >> hw/i2c/trace-events | 5 ++ >> hw/intc/Kconfig | 4 ++ >> hw/intc/meson.build | 3 +- >> hw/ppc/meson.build | 1 + >> hw/ppc/trace-events | 3 + >> 21 files changed, 285 insertions(+), 277 deletions(-) >> create mode 100644 hw/ppc/ppce500_ccsr.c >> >
On 9/23/24 23:25, Bernhard Beschow wrote: > > > > Am 23. September 2024 20:23:54 UTC schrieb "Cédric Le Goater" <clg@redhat.com>: >> Hello Bernhard, > > Hi Cédric, > >> >> On 9/23/24 11:29, Bernhard Beschow wrote: >>> This series is part of a bigger series exploring data-driven machine creation >>> using device tree blobs on top of the e500 machines [1]. It contains patches to >>> make this exploration easier which are also expected to provide value in >>> themselves. >>> >>> The cleanup starts with the e500 machine class itself, then proceeds with >>> machine-specific device models and concludes with more or less loosely related >>> devices. Device cleanup mostly consists of using the DEFINE_TYPES() macro. >> >> Since you recently took a look at the machine models, would you >> be willing to take over maintenance of the e500 ? It shouldn't >> be an enormous amount of work. > > Are you referring to the machine and related devices or the CPU? I'm somewhat familiar with the P102x and could take over but the CPU would be a different beast. Please take a look at the MAINTAINERS file. You will see it is not that large and the CPU target models are not part of it. Thanks, C. > > Best regards, > Bernhard > >> >> Thanks, >> >> C. >> >> >> >>> [1] https://github.com/shentok/qemu/tree/e500-fdt >>> >>> Bernhard Beschow (23): >>> hw/ppc/e500: Do not leak struct boot_info >>> hw/ppc/e500: Reduce scope of env pointer >>> hw/ppc/e500: Prefer QOM cast >>> hw/ppc/e500: Remove unused "irqs" parameter >>> hw/ppc/e500: Add missing device tree properties to i2c controller node >>> hw/ppc/e500: Use SysBusDevice API to access TYPE_CCSR's internal >>> resources >>> hw/ppc/e500: Extract ppce500_ccsr.c >>> hw/ppc/ppce500_ccsr: Log access to unimplemented registers >>> hw/ppc/mpc8544_guts: Populate POR PLL ratio status register >>> hw/i2c/mpc_i2c: Convert DPRINTF to trace events for register access >>> hw/i2c/mpc_i2c: Prefer DEFINE_TYPES() macro >>> hw/pci-host/ppce500: Reuse TYPE_PPC_E500_PCI_BRIDGE define >>> hw/pci-host/ppce500: Prefer DEFINE_TYPES() macro >>> hw/gpio/mpc8xxx: Prefer DEFINE_TYPES() macro >>> hw/ppc/mpc8544_guts: Prefer DEFINE_TYPES() macro >>> hw/net/fsl_etsec/etsec: Prefer DEFINE_TYPES() macro >>> hw/intc: Guard openpic_kvm.c by dedicated OPENPIC_KVM Kconfig switch >>> hw/sd/sdhci: Prefer DEFINE_TYPES() macro >>> hw/block/pflash_cfi01: Prefer DEFINE_TYPES() macro >>> hw/i2c/smbus_eeprom: Prefer DEFINE_TYPES() macro >>> hw/rtc/ds1338: Prefer DEFINE_TYPES() macro >>> hw/usb/hcd-ehci-sysbus: Prefer DEFINE_TYPES() macro >>> hw/vfio/platform: Let vfio_start_eventfd_injection() take >>> VFIOPlatformDevice pointer >>> >>> MAINTAINERS | 2 +- >>> hw/ppc/e500-ccsr.h | 2 + >>> hw/ppc/e500.h | 8 +++ >>> hw/block/pflash_cfi01.c | 21 +++---- >>> hw/gpio/mpc8xxx.c | 22 +++----- >>> hw/i2c/mpc_i2c.c | 29 +++++----- >>> hw/i2c/smbus_eeprom.c | 19 +++---- >>> hw/net/fsl_etsec/etsec.c | 22 +++----- >>> hw/pci-host/ppce500.c | 54 ++++++++---------- >>> hw/ppc/e500.c | 61 +++++--------------- >>> hw/ppc/mpc8544_guts.c | 32 +++++++---- >>> hw/ppc/ppce500_ccsr.c | 67 ++++++++++++++++++++++ >>> hw/rtc/ds1338.c | 20 +++---- >>> hw/sd/sdhci.c | 62 +++++++++----------- >>> hw/usb/hcd-ehci-sysbus.c | 118 +++++++++++++++++---------------------- >>> hw/vfio/platform.c | 7 +-- >>> hw/i2c/trace-events | 5 ++ >>> hw/intc/Kconfig | 4 ++ >>> hw/intc/meson.build | 3 +- >>> hw/ppc/meson.build | 1 + >>> hw/ppc/trace-events | 3 + >>> 21 files changed, 285 insertions(+), 277 deletions(-) >>> create mode 100644 hw/ppc/ppce500_ccsr.c >>> >> >
Am 24. September 2024 08:33:26 UTC schrieb "Cédric Le Goater" <clg@redhat.com>: >On 9/23/24 23:25, Bernhard Beschow wrote: >> >> >> >> Am 23. September 2024 20:23:54 UTC schrieb "Cédric Le Goater" <clg@redhat.com>: >>> Hello Bernhard, >> >> Hi Cédric, >> >>> >>> On 9/23/24 11:29, Bernhard Beschow wrote: >>>> This series is part of a bigger series exploring data-driven machine creation >>>> using device tree blobs on top of the e500 machines [1]. It contains patches to >>>> make this exploration easier which are also expected to provide value in >>>> themselves. >>>> >>>> The cleanup starts with the e500 machine class itself, then proceeds with >>>> machine-specific device models and concludes with more or less loosely related >>>> devices. Device cleanup mostly consists of using the DEFINE_TYPES() macro. >>> >>> Since you recently took a look at the machine models, would you >>> be willing to take over maintenance of the e500 ? It shouldn't >>> be an enormous amount of work. >> >> Are you referring to the machine and related devices or the CPU? I'm somewhat familiar with the P102x and could take over but the CPU would be a different beast. > >Please take a look at the MAINTAINERS file. You will see it is not >that large and the CPU target models are not part of it. Patch sent: https://lore.kernel.org/qemu-devel/20240926075948.2343-1-shentey@gmail.com/ Best regards, Bernhard > > >Thanks, > >C. > > > >> >> Best regards, >> Bernhard >> >>> >>> Thanks, >>> >>> C. >>> >>> >>> >>>> [1] https://github.com/shentok/qemu/tree/e500-fdt >>>> >>>> Bernhard Beschow (23): >>>> hw/ppc/e500: Do not leak struct boot_info >>>> hw/ppc/e500: Reduce scope of env pointer >>>> hw/ppc/e500: Prefer QOM cast >>>> hw/ppc/e500: Remove unused "irqs" parameter >>>> hw/ppc/e500: Add missing device tree properties to i2c controller node >>>> hw/ppc/e500: Use SysBusDevice API to access TYPE_CCSR's internal >>>> resources >>>> hw/ppc/e500: Extract ppce500_ccsr.c >>>> hw/ppc/ppce500_ccsr: Log access to unimplemented registers >>>> hw/ppc/mpc8544_guts: Populate POR PLL ratio status register >>>> hw/i2c/mpc_i2c: Convert DPRINTF to trace events for register access >>>> hw/i2c/mpc_i2c: Prefer DEFINE_TYPES() macro >>>> hw/pci-host/ppce500: Reuse TYPE_PPC_E500_PCI_BRIDGE define >>>> hw/pci-host/ppce500: Prefer DEFINE_TYPES() macro >>>> hw/gpio/mpc8xxx: Prefer DEFINE_TYPES() macro >>>> hw/ppc/mpc8544_guts: Prefer DEFINE_TYPES() macro >>>> hw/net/fsl_etsec/etsec: Prefer DEFINE_TYPES() macro >>>> hw/intc: Guard openpic_kvm.c by dedicated OPENPIC_KVM Kconfig switch >>>> hw/sd/sdhci: Prefer DEFINE_TYPES() macro >>>> hw/block/pflash_cfi01: Prefer DEFINE_TYPES() macro >>>> hw/i2c/smbus_eeprom: Prefer DEFINE_TYPES() macro >>>> hw/rtc/ds1338: Prefer DEFINE_TYPES() macro >>>> hw/usb/hcd-ehci-sysbus: Prefer DEFINE_TYPES() macro >>>> hw/vfio/platform: Let vfio_start_eventfd_injection() take >>>> VFIOPlatformDevice pointer >>>> >>>> MAINTAINERS | 2 +- >>>> hw/ppc/e500-ccsr.h | 2 + >>>> hw/ppc/e500.h | 8 +++ >>>> hw/block/pflash_cfi01.c | 21 +++---- >>>> hw/gpio/mpc8xxx.c | 22 +++----- >>>> hw/i2c/mpc_i2c.c | 29 +++++----- >>>> hw/i2c/smbus_eeprom.c | 19 +++---- >>>> hw/net/fsl_etsec/etsec.c | 22 +++----- >>>> hw/pci-host/ppce500.c | 54 ++++++++---------- >>>> hw/ppc/e500.c | 61 +++++--------------- >>>> hw/ppc/mpc8544_guts.c | 32 +++++++---- >>>> hw/ppc/ppce500_ccsr.c | 67 ++++++++++++++++++++++ >>>> hw/rtc/ds1338.c | 20 +++---- >>>> hw/sd/sdhci.c | 62 +++++++++----------- >>>> hw/usb/hcd-ehci-sysbus.c | 118 +++++++++++++++++---------------------- >>>> hw/vfio/platform.c | 7 +-- >>>> hw/i2c/trace-events | 5 ++ >>>> hw/intc/Kconfig | 4 ++ >>>> hw/intc/meson.build | 3 +- >>>> hw/ppc/meson.build | 1 + >>>> hw/ppc/trace-events | 3 + >>>> 21 files changed, 285 insertions(+), 277 deletions(-) >>>> create mode 100644 hw/ppc/ppce500_ccsr.c >>>> >>> >> >
This series is part of a bigger series exploring data-driven machine creation using device tree blobs on top of the e500 machines [1]. It contains patches to make this exploration easier which are also expected to provide value in themselves. The cleanup starts with the e500 machine class itself, then proceeds with machine-specific device models and concludes with more or less loosely related devices. Device cleanup mostly consists of using the DEFINE_TYPES() macro. [1] https://github.com/shentok/qemu/tree/e500-fdt Bernhard Beschow (23): hw/ppc/e500: Do not leak struct boot_info hw/ppc/e500: Reduce scope of env pointer hw/ppc/e500: Prefer QOM cast hw/ppc/e500: Remove unused "irqs" parameter hw/ppc/e500: Add missing device tree properties to i2c controller node hw/ppc/e500: Use SysBusDevice API to access TYPE_CCSR's internal resources hw/ppc/e500: Extract ppce500_ccsr.c hw/ppc/ppce500_ccsr: Log access to unimplemented registers hw/ppc/mpc8544_guts: Populate POR PLL ratio status register hw/i2c/mpc_i2c: Convert DPRINTF to trace events for register access hw/i2c/mpc_i2c: Prefer DEFINE_TYPES() macro hw/pci-host/ppce500: Reuse TYPE_PPC_E500_PCI_BRIDGE define hw/pci-host/ppce500: Prefer DEFINE_TYPES() macro hw/gpio/mpc8xxx: Prefer DEFINE_TYPES() macro hw/ppc/mpc8544_guts: Prefer DEFINE_TYPES() macro hw/net/fsl_etsec/etsec: Prefer DEFINE_TYPES() macro hw/intc: Guard openpic_kvm.c by dedicated OPENPIC_KVM Kconfig switch hw/sd/sdhci: Prefer DEFINE_TYPES() macro hw/block/pflash_cfi01: Prefer DEFINE_TYPES() macro hw/i2c/smbus_eeprom: Prefer DEFINE_TYPES() macro hw/rtc/ds1338: Prefer DEFINE_TYPES() macro hw/usb/hcd-ehci-sysbus: Prefer DEFINE_TYPES() macro hw/vfio/platform: Let vfio_start_eventfd_injection() take VFIOPlatformDevice pointer MAINTAINERS | 2 +- hw/ppc/e500-ccsr.h | 2 + hw/ppc/e500.h | 8 +++ hw/block/pflash_cfi01.c | 21 +++---- hw/gpio/mpc8xxx.c | 22 +++----- hw/i2c/mpc_i2c.c | 29 +++++----- hw/i2c/smbus_eeprom.c | 19 +++---- hw/net/fsl_etsec/etsec.c | 22 +++----- hw/pci-host/ppce500.c | 54 ++++++++---------- hw/ppc/e500.c | 61 +++++--------------- hw/ppc/mpc8544_guts.c | 32 +++++++---- hw/ppc/ppce500_ccsr.c | 67 ++++++++++++++++++++++ hw/rtc/ds1338.c | 20 +++---- hw/sd/sdhci.c | 62 +++++++++----------- hw/usb/hcd-ehci-sysbus.c | 118 +++++++++++++++++---------------------- hw/vfio/platform.c | 7 +-- hw/i2c/trace-events | 5 ++ hw/intc/Kconfig | 4 ++ hw/intc/meson.build | 3 +- hw/ppc/meson.build | 1 + hw/ppc/trace-events | 3 + 21 files changed, 285 insertions(+), 277 deletions(-) create mode 100644 hw/ppc/ppce500_ccsr.c