| Message ID | 03f58582c27a729ab305f8337ca2d2b8034bdd3b.1693240836.git.maciej.szmigiero@oracle.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Hyper-V Dynamic Memory Protocol driver (hv-balloon | expand |
"Maciej S. Szmigiero" <mail@maciej.szmigiero.name> writes: > From: "Maciej S. Szmigiero" <maciej.szmigiero@oracle.com> > > Used by the hv-balloon driver for (optional) guest memory status reports. > > Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> [...] > static void hv_balloon_handle_unballoon_response(HvBalloon *balloon, > diff --git a/monitor/monitor.c b/monitor/monitor.c > index dc352f9e9d95..81513c642691 100644 > --- a/monitor/monitor.c > +++ b/monitor/monitor.c > @@ -315,6 +315,7 @@ static MonitorQAPIEventConf monitor_qapi_event_conf[QAPI_EVENT__MAX] = { > [QAPI_EVENT_QUORUM_FAILURE] = { 1000 * SCALE_MS }, > [QAPI_EVENT_VSERPORT_CHANGE] = { 1000 * SCALE_MS }, > [QAPI_EVENT_MEMORY_DEVICE_SIZE_CHANGE] = { 1000 * SCALE_MS }, > + [QAPI_EVENT_HV_BALLOON_STATUS_REPORT] = { 1000 * SCALE_MS }, > }; > > /* > diff --git a/qapi/machine.json b/qapi/machine.json > index 5ede977cf2bc..f592876964af 100644 > --- a/qapi/machine.json > +++ b/qapi/machine.json > @@ -1113,6 +1113,70 @@ > { 'event': 'BALLOON_CHANGE', > 'data': { 'actual': 'int' } } > > +## > +# @HvBalloonInfo: > +# > +# hv-balloon guest-provided memory status information. > +# > +# @committed: the amount of memory in use inside the guest plus the > +# amount of the memory unusable inside the guest (ballooned out, > +# offline, etc.) > +# > +# @available: the amount of the memory inside the guest available for > +# new allocations ("free") > +# > +# Since: 8.2 > +## > +{ 'struct': 'HvBalloonInfo', 'data': { 'committed': 'size', 'available': 'size' } } > + > +## > +# @query-hv-balloon-status-report: > +# > +# Returns the hv-balloon driver data contained in the last received "STATUS" > +# message from the guest. > +# > +# Returns: > +# - @HvBalloonInfo on success > +# - If no hv-balloon device is present, DeviceNotFound > +# - If guest memory status reporting not enabled or no guest memory status > +# report received yet, GenericError Indentation is off, confusing Sphinx. Do you actually need to tell the two failures apart? Do me a favour and break the lines a bit earlier, like # Returns the hv-balloon driver data contained in the last received # "STATUS" message from the guest. # # Returns: # - @HvBalloonInfo on success # - If no hv-balloon device is present, DeviceNotFound # - If guest memory status reporting not enabled or no guest memory # status report received yet, GenericError > +# > +# Since: 8.2 > +# > +# Example: > +# > +# -> { "execute": "query-hv-balloon-status-report" } > +# <- { "return": { > +# "committed": 816640000, > +# "available": 3333054464 > +# } > +# } > +## > +{ 'command': 'query-hv-balloon-status-report', 'returns': 'HvBalloonInfo' } > + > +## > +# @HV_BALLOON_STATUS_REPORT: > +# > +# Emitted when the hv-balloon driver receives a "STATUS" message from > +# the guest. > +# > +# @data - a @HvBalloonInfo equivalent to the one returned by the This needs to be # @data: ... text ... to be rendered correctly. Suggest # @data: contents of "STATUS" message received from the guest. > +# 'query-hv-balloon-status-report' command. > +# > +# Note: this event is rate-limited. > +# > +# Since: 8.2 > +# > +# Example: > +# > +# <- { "event": "HV_BALLOON_STATUS_REPORT", > +# "data": { "committed": 816640000, "available": 3333054464 }, > +# "timestamp": { "seconds": 1600295492, "microseconds": 661044 } } > +# > +## > +{ 'event': 'HV_BALLOON_STATUS_REPORT', > + 'data': 'HvBalloonInfo' } > + > ## > # @MemoryInfo: > #
On 25.09.2023 13:49, Markus Armbruster wrote: > "Maciej S. Szmigiero" <mail@maciej.szmigiero.name> writes: > >> From: "Maciej S. Szmigiero" <maciej.szmigiero@oracle.com> >> >> Used by the hv-balloon driver for (optional) guest memory status reports. >> >> Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> > > [...] > >> static void hv_balloon_handle_unballoon_response(HvBalloon *balloon, >> diff --git a/monitor/monitor.c b/monitor/monitor.c >> index dc352f9e9d95..81513c642691 100644 >> --- a/monitor/monitor.c >> +++ b/monitor/monitor.c >> @@ -315,6 +315,7 @@ static MonitorQAPIEventConf monitor_qapi_event_conf[QAPI_EVENT__MAX] = { >> [QAPI_EVENT_QUORUM_FAILURE] = { 1000 * SCALE_MS }, >> [QAPI_EVENT_VSERPORT_CHANGE] = { 1000 * SCALE_MS }, >> [QAPI_EVENT_MEMORY_DEVICE_SIZE_CHANGE] = { 1000 * SCALE_MS }, >> + [QAPI_EVENT_HV_BALLOON_STATUS_REPORT] = { 1000 * SCALE_MS }, >> }; >> >> /* >> diff --git a/qapi/machine.json b/qapi/machine.json >> index 5ede977cf2bc..f592876964af 100644 >> --- a/qapi/machine.json >> +++ b/qapi/machine.json >> @@ -1113,6 +1113,70 @@ >> { 'event': 'BALLOON_CHANGE', >> 'data': { 'actual': 'int' } } >> >> +## >> +# @HvBalloonInfo: >> +# >> +# hv-balloon guest-provided memory status information. >> +# >> +# @committed: the amount of memory in use inside the guest plus the >> +# amount of the memory unusable inside the guest (ballooned out, >> +# offline, etc.) >> +# >> +# @available: the amount of the memory inside the guest available for >> +# new allocations ("free") >> +# >> +# Since: 8.2 >> +## >> +{ 'struct': 'HvBalloonInfo', 'data': { 'committed': 'size', 'available': 'size' } } >> + >> +## >> +# @query-hv-balloon-status-report: >> +# >> +# Returns the hv-balloon driver data contained in the last received "STATUS" >> +# message from the guest. >> +# >> +# Returns: >> +# - @HvBalloonInfo on success >> +# - If no hv-balloon device is present, DeviceNotFound >> +# - If guest memory status reporting not enabled or no guest memory status >> +# report received yet, GenericError > > Indentation is off, confusing Sphinx. > > Do you actually need to tell the two failures apart? Technically no, it's just for the API consumer convenience. > Do me a favour and break the lines a bit earlier, like > > # Returns the hv-balloon driver data contained in the last received > # "STATUS" message from the guest. > # > # Returns: > # - @HvBalloonInfo on success > # - If no hv-balloon device is present, DeviceNotFound > # - If guest memory status reporting not enabled or no guest memory > # status report received yet, GenericError Will do. >> +# >> +# Since: 8.2 >> +# >> +# Example: >> +# >> +# -> { "execute": "query-hv-balloon-status-report" } >> +# <- { "return": { >> +# "committed": 816640000, >> +# "available": 3333054464 >> +# } >> +# } >> +## >> +{ 'command': 'query-hv-balloon-status-report', 'returns': 'HvBalloonInfo' } >> + >> +## >> +# @HV_BALLOON_STATUS_REPORT: >> +# >> +# Emitted when the hv-balloon driver receives a "STATUS" message from >> +# the guest. >> +# >> +# @data - a @HvBalloonInfo equivalent to the one returned by the > > This needs to be > > # @data: ... text ... > > to be rendered correctly. > > Suggest > > # @data: contents of "STATUS" message received from the guest. Will do. Thanks, Maciej
"Maciej S. Szmigiero" <mail@maciej.szmigiero.name> writes: > On 25.09.2023 13:49, Markus Armbruster wrote: >> "Maciej S. Szmigiero" <mail@maciej.szmigiero.name> writes: >> >>> From: "Maciej S. Szmigiero" <maciej.szmigiero@oracle.com> >>> >>> Used by the hv-balloon driver for (optional) guest memory status reports. >>> >>> Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> >> [...] >> >>> static void hv_balloon_handle_unballoon_response(HvBalloon *balloon, >>> diff --git a/monitor/monitor.c b/monitor/monitor.c >>> index dc352f9e9d95..81513c642691 100644 >>> --- a/monitor/monitor.c >>> +++ b/monitor/monitor.c >>> @@ -315,6 +315,7 @@ static MonitorQAPIEventConf monitor_qapi_event_conf[QAPI_EVENT__MAX] = { >>> [QAPI_EVENT_QUORUM_FAILURE] = { 1000 * SCALE_MS }, >>> [QAPI_EVENT_VSERPORT_CHANGE] = { 1000 * SCALE_MS }, >>> [QAPI_EVENT_MEMORY_DEVICE_SIZE_CHANGE] = { 1000 * SCALE_MS }, >>> + [QAPI_EVENT_HV_BALLOON_STATUS_REPORT] = { 1000 * SCALE_MS }, >>> }; >>> /* >>> diff --git a/qapi/machine.json b/qapi/machine.json >>> index 5ede977cf2bc..f592876964af 100644 >>> --- a/qapi/machine.json >>> +++ b/qapi/machine.json >>> @@ -1113,6 +1113,70 @@ >>> { 'event': 'BALLOON_CHANGE', >>> 'data': { 'actual': 'int' } } >>> +## >>> +# @HvBalloonInfo: >>> +# >>> +# hv-balloon guest-provided memory status information. >>> +# >>> +# @committed: the amount of memory in use inside the guest plus the >>> +# amount of the memory unusable inside the guest (ballooned out, >>> +# offline, etc.) >>> +# >>> +# @available: the amount of the memory inside the guest available for >>> +# new allocations ("free") >>> +# >>> +# Since: 8.2 >>> +## >>> +{ 'struct': 'HvBalloonInfo', 'data': { 'committed': 'size', 'available': 'size' } } Long line. Wrap it like { 'struct': 'HvBalloonInfo', 'data': { 'committed': 'size', 'available': 'size' } } >>> + >>> +## >>> +# @query-hv-balloon-status-report: >>> +# >>> +# Returns the hv-balloon driver data contained in the last received "STATUS" >>> +# message from the guest. >>> +# >>> +# Returns: >>> +# - @HvBalloonInfo on success >>> +# - If no hv-balloon device is present, DeviceNotFound >>> +# - If guest memory status reporting not enabled or no guest memory status >>> +# report received yet, GenericError >> >> Indentation is off, confusing Sphinx. >> >> Do you actually need to tell the two failures apart? > > Technically no, it's just for the API consumer convenience. Error classes are remnants of a failed error reporting design ("rich" error objects), and new code should stick to GenericError. Exceptions can be made when there's a proven need for distinguishing errors, or for consistency, say when extending an existing interface. The commit burying "rich" errors: de253f1491 qmp: switch to the new error format on the wire Followup commits: 6ec46ad541 block: Fix block-set-write-threshold not to use funky error class f3cf80e805 vnc: Fix QMP change not to use funky error class 5b347c5410 block: Fix blockdev-backup not to use funky error class 71568864c4 qapi: Fix up references to long gone error classes [...]
diff --git a/hw/hyperv/hv-balloon.c b/hw/hyperv/hv-balloon.c index c384f23a3b5e..d3f24721248a 100644 --- a/hw/hyperv/hv-balloon.c +++ b/hw/hyperv/hv-balloon.c @@ -1099,7 +1099,36 @@ static void hv_balloon_handle_status_report(HvBalloon *balloon, balloon->status_report.available *= HV_BALLOON_PAGE_SIZE; balloon->status_report.received = true; - /* report event */ + qapi_event_send_hv_balloon_status_report(balloon->status_report.committed, + balloon->status_report.available); +} + +HvBalloonInfo *qmp_query_hv_balloon_status_report(Error **errp) +{ + HvBalloon *balloon; + HvBalloonInfo *info; + + balloon = HV_BALLOON(object_resolve_path_type("", TYPE_HV_BALLOON, NULL)); + if (!balloon) { + error_set(errp, ERROR_CLASS_DEVICE_NOT_FOUND, + "no %s device present", TYPE_HV_BALLOON); + return NULL; + } + + if (!balloon->status_report.enabled) { + error_setg(errp, "guest memory status reporting not enabled"); + return NULL; + } + + if (!balloon->status_report.received) { + error_setg(errp, "no guest memory status report received yet"); + return NULL; + } + + info = g_malloc0(sizeof(*info)); + info->committed = balloon->status_report.committed; + info->available = balloon->status_report.available; + return info; } static void hv_balloon_handle_unballoon_response(HvBalloon *balloon, diff --git a/monitor/monitor.c b/monitor/monitor.c index dc352f9e9d95..81513c642691 100644 --- a/monitor/monitor.c +++ b/monitor/monitor.c @@ -315,6 +315,7 @@ static MonitorQAPIEventConf monitor_qapi_event_conf[QAPI_EVENT__MAX] = { [QAPI_EVENT_QUORUM_FAILURE] = { 1000 * SCALE_MS }, [QAPI_EVENT_VSERPORT_CHANGE] = { 1000 * SCALE_MS }, [QAPI_EVENT_MEMORY_DEVICE_SIZE_CHANGE] = { 1000 * SCALE_MS }, + [QAPI_EVENT_HV_BALLOON_STATUS_REPORT] = { 1000 * SCALE_MS }, }; /* diff --git a/qapi/machine.json b/qapi/machine.json index 5ede977cf2bc..f592876964af 100644 --- a/qapi/machine.json +++ b/qapi/machine.json @@ -1113,6 +1113,70 @@ { 'event': 'BALLOON_CHANGE', 'data': { 'actual': 'int' } } +## +# @HvBalloonInfo: +# +# hv-balloon guest-provided memory status information. +# +# @committed: the amount of memory in use inside the guest plus the +# amount of the memory unusable inside the guest (ballooned out, +# offline, etc.) +# +# @available: the amount of the memory inside the guest available for +# new allocations ("free") +# +# Since: 8.2 +## +{ 'struct': 'HvBalloonInfo', 'data': { 'committed': 'size', 'available': 'size' } } + +## +# @query-hv-balloon-status-report: +# +# Returns the hv-balloon driver data contained in the last received "STATUS" +# message from the guest. +# +# Returns: +# - @HvBalloonInfo on success +# - If no hv-balloon device is present, DeviceNotFound +# - If guest memory status reporting not enabled or no guest memory status +# report received yet, GenericError +# +# Since: 8.2 +# +# Example: +# +# -> { "execute": "query-hv-balloon-status-report" } +# <- { "return": { +# "committed": 816640000, +# "available": 3333054464 +# } +# } +## +{ 'command': 'query-hv-balloon-status-report', 'returns': 'HvBalloonInfo' } + +## +# @HV_BALLOON_STATUS_REPORT: +# +# Emitted when the hv-balloon driver receives a "STATUS" message from +# the guest. +# +# @data - a @HvBalloonInfo equivalent to the one returned by the +# 'query-hv-balloon-status-report' command. +# +# Note: this event is rate-limited. +# +# Since: 8.2 +# +# Example: +# +# <- { "event": "HV_BALLOON_STATUS_REPORT", +# "data": { "committed": 816640000, "available": 3333054464 }, +# "timestamp": { "seconds": 1600295492, "microseconds": 661044 } } +# +## +{ 'event': 'HV_BALLOON_STATUS_REPORT', + 'data': 'HvBalloonInfo' } + ## # @MemoryInfo: #