diff mbox

[PULL,03/36] ssi: Move ssi.h into a separate directory

Message ID 1453388189-13092-4-git-send-email-peter.maydell@linaro.org (mailing list archive)
State New, archived
Headers show

Commit Message

Peter Maydell Jan. 21, 2016, 2:55 p.m. UTC
From: Alistair Francis <alistair.francis@xilinx.com>

Move the ssi.h include file into the ssi directory.

While touching the code also fix the typdef lines as
checkpatch complains.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/pxa2xx.c                     |  2 +-
 hw/arm/spitz.c                      |  2 +-
 hw/arm/stellaris.c                  |  2 +-
 hw/arm/strongarm.c                  |  2 +-
 hw/arm/tosa.c                       |  2 +-
 hw/arm/xilinx_zynq.c                |  2 +-
 hw/arm/z2.c                         |  2 +-
 hw/block/m25p80.c                   |  2 +-
 hw/display/ads7846.c                |  2 +-
 hw/display/ssd0323.c                |  2 +-
 hw/microblaze/petalogix_ml605_mmu.c |  2 +-
 hw/misc/max111x.c                   |  2 +-
 hw/sd/ssi-sd.c                      |  2 +-
 hw/ssi/pl022.c                      |  2 +-
 hw/ssi/ssi.c                        |  2 +-
 hw/ssi/xilinx_spi.c                 |  2 +-
 hw/ssi/xilinx_spips.c               |  2 +-
 include/hw/ssi.h                    | 94 ------------------------------------
 include/hw/ssi/ssi.h                | 96 +++++++++++++++++++++++++++++++++++++
 19 files changed, 113 insertions(+), 111 deletions(-)
 delete mode 100644 include/hw/ssi.h
 create mode 100644 include/hw/ssi/ssi.h
diff mbox

Patch

diff --git a/hw/arm/pxa2xx.c b/hw/arm/pxa2xx.c
index db58781..ff6ac7a 100644
--- a/hw/arm/pxa2xx.c
+++ b/hw/arm/pxa2xx.c
@@ -13,7 +13,7 @@ 
 #include "sysemu/sysemu.h"
 #include "hw/char/serial.h"
 #include "hw/i2c/i2c.h"
-#include "hw/ssi.h"
+#include "hw/ssi/ssi.h"
 #include "sysemu/char.h"
 #include "sysemu/block-backend.h"
 #include "sysemu/blockdev.h"
diff --git a/hw/arm/spitz.c b/hw/arm/spitz.c
index 317ade1..607cb58 100644
--- a/hw/arm/spitz.c
+++ b/hw/arm/spitz.c
@@ -17,7 +17,7 @@ 
 #include "sysemu/sysemu.h"
 #include "hw/pcmcia.h"
 #include "hw/i2c/i2c.h"
-#include "hw/ssi.h"
+#include "hw/ssi/ssi.h"
 #include "hw/block/flash.h"
 #include "qemu/timer.h"
 #include "hw/devices.h"
diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c
index 3eb7d3c..de8dbb2 100644
--- a/hw/arm/stellaris.c
+++ b/hw/arm/stellaris.c
@@ -9,7 +9,7 @@ 
 
 #include "qemu/osdep.h"
 #include "hw/sysbus.h"
-#include "hw/ssi.h"
+#include "hw/ssi/ssi.h"
 #include "hw/arm/arm.h"
 #include "hw/devices.h"
 #include "qemu/timer.h"
diff --git a/hw/arm/strongarm.c b/hw/arm/strongarm.c
index d9f2f5b..3b17a21 100644
--- a/hw/arm/strongarm.c
+++ b/hw/arm/strongarm.c
@@ -35,7 +35,7 @@ 
 #include "hw/arm/arm.h"
 #include "sysemu/char.h"
 #include "sysemu/sysemu.h"
-#include "hw/ssi.h"
+#include "hw/ssi/ssi.h"
 
 //#define DEBUG
 
diff --git a/hw/arm/tosa.c b/hw/arm/tosa.c
index c387950..d83c1e1 100644
--- a/hw/arm/tosa.c
+++ b/hw/arm/tosa.c
@@ -20,7 +20,7 @@ 
 #include "hw/pcmcia.h"
 #include "hw/boards.h"
 #include "hw/i2c/i2c.h"
-#include "hw/ssi.h"
+#include "hw/ssi/ssi.h"
 #include "sysemu/block-backend.h"
 #include "hw/sysbus.h"
 #include "exec/address-spaces.h"
diff --git a/hw/arm/xilinx_zynq.c b/hw/arm/xilinx_zynq.c
index 40b4761..66e7f27 100644
--- a/hw/arm/xilinx_zynq.c
+++ b/hw/arm/xilinx_zynq.c
@@ -26,7 +26,7 @@ 
 #include "sysemu/block-backend.h"
 #include "hw/loader.h"
 #include "hw/misc/zynq-xadc.h"
-#include "hw/ssi.h"
+#include "hw/ssi/ssi.h"
 #include "qemu/error-report.h"
 
 #define NUM_SPI_FLASHES 4
diff --git a/hw/arm/z2.c b/hw/arm/z2.c
index aecb24a..aea895a 100644
--- a/hw/arm/z2.c
+++ b/hw/arm/z2.c
@@ -17,7 +17,7 @@ 
 #include "hw/arm/arm.h"
 #include "hw/devices.h"
 #include "hw/i2c/i2c.h"
-#include "hw/ssi.h"
+#include "hw/ssi/ssi.h"
 #include "hw/boards.h"
 #include "sysemu/sysemu.h"
 #include "hw/block/flash.h"
diff --git a/hw/block/m25p80.c b/hw/block/m25p80.c
index b49260a..de24f42 100644
--- a/hw/block/m25p80.c
+++ b/hw/block/m25p80.c
@@ -25,7 +25,7 @@ 
 #include "hw/hw.h"
 #include "sysemu/block-backend.h"
 #include "sysemu/blockdev.h"
-#include "hw/ssi.h"
+#include "hw/ssi/ssi.h"
 
 #ifndef M25P80_ERR_DEBUG
 #define M25P80_ERR_DEBUG 0
diff --git a/hw/display/ads7846.c b/hw/display/ads7846.c
index 3f35369..cb82317 100644
--- a/hw/display/ads7846.c
+++ b/hw/display/ads7846.c
@@ -10,7 +10,7 @@ 
  * GNU GPL, version 2 or (at your option) any later version.
  */
 
-#include "hw/ssi.h"
+#include "hw/ssi/ssi.h"
 #include "ui/console.h"
 
 typedef struct {
diff --git a/hw/display/ssd0323.c b/hw/display/ssd0323.c
index 9727007..7545da8 100644
--- a/hw/display/ssd0323.c
+++ b/hw/display/ssd0323.c
@@ -10,7 +10,7 @@ 
 /* The controller can support a variety of different displays, but we only
    implement one.  Most of the commends relating to brightness and geometry
    setup are ignored. */
-#include "hw/ssi.h"
+#include "hw/ssi/ssi.h"
 #include "ui/console.h"
 
 //#define DEBUG_SSD0323 1
diff --git a/hw/microblaze/petalogix_ml605_mmu.c b/hw/microblaze/petalogix_ml605_mmu.c
index edfb30f..3f9fa5f 100644
--- a/hw/microblaze/petalogix_ml605_mmu.c
+++ b/hw/microblaze/petalogix_ml605_mmu.c
@@ -35,7 +35,7 @@ 
 #include "sysemu/block-backend.h"
 #include "hw/char/serial.h"
 #include "exec/address-spaces.h"
-#include "hw/ssi.h"
+#include "hw/ssi/ssi.h"
 
 #include "boot.h"
 
diff --git a/hw/misc/max111x.c b/hw/misc/max111x.c
index bef3651..d619d61 100644
--- a/hw/misc/max111x.c
+++ b/hw/misc/max111x.c
@@ -10,7 +10,7 @@ 
  * GNU GPL, version 2 or (at your option) any later version.
  */
 
-#include "hw/ssi.h"
+#include "hw/ssi/ssi.h"
 
 typedef struct {
     SSISlave parent_obj;
diff --git a/hw/sd/ssi-sd.c b/hw/sd/ssi-sd.c
index c49ff62..eeb96b9 100644
--- a/hw/sd/ssi-sd.c
+++ b/hw/sd/ssi-sd.c
@@ -12,7 +12,7 @@ 
 
 #include "sysemu/block-backend.h"
 #include "sysemu/blockdev.h"
-#include "hw/ssi.h"
+#include "hw/ssi/ssi.h"
 #include "hw/sd/sd.h"
 
 //#define DEBUG_SSI_SD 1
diff --git a/hw/ssi/pl022.c b/hw/ssi/pl022.c
index 61d568f..0bbf633 100644
--- a/hw/ssi/pl022.c
+++ b/hw/ssi/pl022.c
@@ -8,7 +8,7 @@ 
  */
 
 #include "hw/sysbus.h"
-#include "hw/ssi.h"
+#include "hw/ssi/ssi.h"
 
 //#define DEBUG_PL022 1
 
diff --git a/hw/ssi/ssi.c b/hw/ssi/ssi.c
index 2aab79b..a0f57c0 100644
--- a/hw/ssi/ssi.c
+++ b/hw/ssi/ssi.c
@@ -12,7 +12,7 @@ 
  * GNU GPL, version 2 or (at your option) any later version.
  */
 
-#include "hw/ssi.h"
+#include "hw/ssi/ssi.h"
 
 struct SSIBus {
     BusState parent_obj;
diff --git a/hw/ssi/xilinx_spi.c b/hw/ssi/xilinx_spi.c
index 620573c..94bb2a7 100644
--- a/hw/ssi/xilinx_spi.c
+++ b/hw/ssi/xilinx_spi.c
@@ -29,7 +29,7 @@ 
 #include "qemu/log.h"
 #include "qemu/fifo8.h"
 
-#include "hw/ssi.h"
+#include "hw/ssi/ssi.h"
 
 #ifdef XILINX_SPI_ERR_DEBUG
 #define DB_PRINT(...) do { \
diff --git a/hw/ssi/xilinx_spips.c b/hw/ssi/xilinx_spips.c
index 0910f54..e9471ff 100644
--- a/hw/ssi/xilinx_spips.c
+++ b/hw/ssi/xilinx_spips.c
@@ -27,7 +27,7 @@ 
 #include "hw/ptimer.h"
 #include "qemu/log.h"
 #include "qemu/fifo8.h"
-#include "hw/ssi.h"
+#include "hw/ssi/ssi.h"
 #include "qemu/bitops.h"
 
 #ifndef XILINX_SPIPS_ERR_DEBUG
diff --git a/include/hw/ssi.h b/include/hw/ssi.h
deleted file mode 100644
index df0f838..0000000
--- a/include/hw/ssi.h
+++ /dev/null
@@ -1,94 +0,0 @@ 
-/* QEMU Synchronous Serial Interface support.  */
-
-/* In principle SSI is a point-point interface.  As such the qemu
-   implementation has a single slave device on a "bus".
-   However it is fairly common for boards to have multiple slaves
-   connected to a single master, and select devices with an external
-   chip select.  This is implemented in qemu by having an explicit mux device.
-   It is assumed that master and slave are both using the same transfer width.
-   */
-
-#ifndef QEMU_SSI_H
-#define QEMU_SSI_H
-
-#include "hw/qdev.h"
-
-typedef struct SSISlave SSISlave;
-
-#define TYPE_SSI_SLAVE "ssi-slave"
-#define SSI_SLAVE(obj) \
-     OBJECT_CHECK(SSISlave, (obj), TYPE_SSI_SLAVE)
-#define SSI_SLAVE_CLASS(klass) \
-     OBJECT_CLASS_CHECK(SSISlaveClass, (klass), TYPE_SSI_SLAVE)
-#define SSI_SLAVE_GET_CLASS(obj) \
-     OBJECT_GET_CLASS(SSISlaveClass, (obj), TYPE_SSI_SLAVE)
-
-#define SSI_GPIO_CS "ssi-gpio-cs"
-
-typedef enum {
-    SSI_CS_NONE = 0,
-    SSI_CS_LOW,
-    SSI_CS_HIGH,
-} SSICSMode;
-
-/* Slave devices.  */
-typedef struct SSISlaveClass {
-    DeviceClass parent_class;
-
-    int (*init)(SSISlave *dev);
-
-    /* if you have standard or no CS behaviour, just override transfer.
-     * This is called when the device cs is active (true by default).
-     */
-    uint32_t (*transfer)(SSISlave *dev, uint32_t val);
-    /* called when the CS line changes. Optional, devices only need to implement
-     * this if they have side effects associated with the cs line (beyond
-     * tristating the txrx lines).
-     */
-    int (*set_cs)(SSISlave *dev, bool select);
-    /* define whether or not CS exists and is active low/high */
-    SSICSMode cs_polarity;
-
-    /* if you have non-standard CS behaviour override this to take control
-     * of the CS behaviour at the device level. transfer, set_cs, and
-     * cs_polarity are unused if this is overwritten. Transfer_raw will
-     * always be called for the device for every txrx access to the parent bus
-     */
-    uint32_t (*transfer_raw)(SSISlave *dev, uint32_t val);
-} SSISlaveClass;
-
-struct SSISlave {
-    DeviceState parent_obj;
-
-    /* Chip select state */
-    bool cs;
-};
-
-#define FROM_SSI_SLAVE(type, dev) DO_UPCAST(type, ssidev, dev)
-
-extern const VMStateDescription vmstate_ssi_slave;
-
-#define VMSTATE_SSI_SLAVE(_field, _state) {                          \
-    .name       = (stringify(_field)),                               \
-    .size       = sizeof(SSISlave),                                  \
-    .vmsd       = &vmstate_ssi_slave,                                \
-    .flags      = VMS_STRUCT,                                        \
-    .offset     = vmstate_offset_value(_state, _field, SSISlave),    \
-}
-
-DeviceState *ssi_create_slave(SSIBus *bus, const char *name);
-DeviceState *ssi_create_slave_no_init(SSIBus *bus, const char *name);
-
-/* Master interface.  */
-SSIBus *ssi_create_bus(DeviceState *parent, const char *name);
-
-uint32_t ssi_transfer(SSIBus *bus, uint32_t val);
-
-/* Automatically connect all children nodes a spi controller as slaves */
-void ssi_auto_connect_slaves(DeviceState *parent, qemu_irq *cs_lines,
-                             SSIBus *bus);
-
-/* max111x.c */
-void max111x_set_input(DeviceState *dev, int line, uint8_t value);
-
-#endif
diff --git a/include/hw/ssi/ssi.h b/include/hw/ssi/ssi.h
new file mode 100644
index 0000000..4a0a539
--- /dev/null
+++ b/include/hw/ssi/ssi.h
@@ -0,0 +1,96 @@ 
+/* QEMU Synchronous Serial Interface support.  */
+
+/* In principle SSI is a point-point interface.  As such the qemu
+   implementation has a single slave device on a "bus".
+   However it is fairly common for boards to have multiple slaves
+   connected to a single master, and select devices with an external
+   chip select.  This is implemented in qemu by having an explicit mux device.
+   It is assumed that master and slave are both using the same transfer width.
+   */
+
+#ifndef QEMU_SSI_H
+#define QEMU_SSI_H
+
+#include "hw/qdev.h"
+
+typedef struct SSISlave SSISlave;
+typedef struct SSISlaveClass SSISlaveClass;
+typedef enum SSICSMode SSICSMode;
+
+#define TYPE_SSI_SLAVE "ssi-slave"
+#define SSI_SLAVE(obj) \
+     OBJECT_CHECK(SSISlave, (obj), TYPE_SSI_SLAVE)
+#define SSI_SLAVE_CLASS(klass) \
+     OBJECT_CLASS_CHECK(SSISlaveClass, (klass), TYPE_SSI_SLAVE)
+#define SSI_SLAVE_GET_CLASS(obj) \
+     OBJECT_GET_CLASS(SSISlaveClass, (obj), TYPE_SSI_SLAVE)
+
+#define SSI_GPIO_CS "ssi-gpio-cs"
+
+enum SSICSMode {
+    SSI_CS_NONE = 0,
+    SSI_CS_LOW,
+    SSI_CS_HIGH,
+};
+
+/* Slave devices.  */
+struct SSISlaveClass {
+    DeviceClass parent_class;
+
+    int (*init)(SSISlave *dev);
+
+    /* if you have standard or no CS behaviour, just override transfer.
+     * This is called when the device cs is active (true by default).
+     */
+    uint32_t (*transfer)(SSISlave *dev, uint32_t val);
+    /* called when the CS line changes. Optional, devices only need to implement
+     * this if they have side effects associated with the cs line (beyond
+     * tristating the txrx lines).
+     */
+    int (*set_cs)(SSISlave *dev, bool select);
+    /* define whether or not CS exists and is active low/high */
+    SSICSMode cs_polarity;
+
+    /* if you have non-standard CS behaviour override this to take control
+     * of the CS behaviour at the device level. transfer, set_cs, and
+     * cs_polarity are unused if this is overwritten. Transfer_raw will
+     * always be called for the device for every txrx access to the parent bus
+     */
+    uint32_t (*transfer_raw)(SSISlave *dev, uint32_t val);
+};
+
+struct SSISlave {
+    DeviceState parent_obj;
+
+    /* Chip select state */
+    bool cs;
+};
+
+#define FROM_SSI_SLAVE(type, dev) DO_UPCAST(type, ssidev, dev)
+
+extern const VMStateDescription vmstate_ssi_slave;
+
+#define VMSTATE_SSI_SLAVE(_field, _state) {                          \
+    .name       = (stringify(_field)),                               \
+    .size       = sizeof(SSISlave),                                  \
+    .vmsd       = &vmstate_ssi_slave,                                \
+    .flags      = VMS_STRUCT,                                        \
+    .offset     = vmstate_offset_value(_state, _field, SSISlave),    \
+}
+
+DeviceState *ssi_create_slave(SSIBus *bus, const char *name);
+DeviceState *ssi_create_slave_no_init(SSIBus *bus, const char *name);
+
+/* Master interface.  */
+SSIBus *ssi_create_bus(DeviceState *parent, const char *name);
+
+uint32_t ssi_transfer(SSIBus *bus, uint32_t val);
+
+/* Automatically connect all children nodes a spi controller as slaves */
+void ssi_auto_connect_slaves(DeviceState *parent, qemu_irq *cs_lines,
+                             SSIBus *bus);
+
+/* max111x.c */
+void max111x_set_input(DeviceState *dev, int line, uint8_t value);
+
+#endif