| Message ID | 1453396734-9363-6-git-send-email-clg@fr.ibm.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Thu, 21 Jan 2016 18:18:50 +0100 Cédric Le Goater <clg@fr.ibm.com> wrote: > The IPMI BMC simulator populates the SDR table with a set of initial > SDRs. The length of each SDR is taken from the record itself (byte 4) > which does not include the size of the header. But, the full length > (header + data) is required by the sdr_add_entry() routine. > > Signed-off-by: Cédric Le Goater <clg@fr.ibm.com> The patch is good but IMHO it should come before patch 4 because this is bugfix that could be applied right away, while patch 4 is code cleanup that may need some more discussion. > --- > hw/ipmi/ipmi_bmc_sim.c | 18 +++++++++--------- > include/hw/ipmi/ipmi.h | 1 + > 2 files changed, 10 insertions(+), 9 deletions(-) > > diff --git a/hw/ipmi/ipmi_bmc_sim.c b/hw/ipmi/ipmi_bmc_sim.c > index 31f990199154..803c7e5130c0 100644 > --- a/hw/ipmi/ipmi_bmc_sim.c > +++ b/hw/ipmi/ipmi_bmc_sim.c > @@ -327,11 +327,11 @@ static int sdr_add_entry(IPMIBmcSim *ibs, const uint8_t *entry, > struct ipmi_sdr_header *sdrh = > (struct ipmi_sdr_header *) &ibs->sdr.sdr[ibs->sdr.next_free]; > > - if ((len < 5) || (len > 255)) { > + if ((len < IPMI_SDR_HEADER_SIZE) || (len > 255)) { > return 1; > } > > - if (sdrh_entry->rec_length != len - 5) { > + if (ipmi_sdr_length(sdrh_entry) != len) { > return 1; > } > > @@ -364,7 +364,7 @@ static int sdr_find_entry(IPMISdr *sdr, uint16_t recid, > struct ipmi_sdr_header *sdrh = > (struct ipmi_sdr_header *) &sdr->sdr[pos]; > uint16_t trec = ipmi_sdr_recid(sdrh); > - unsigned int nextpos = pos + sdrh->rec_length; > + unsigned int nextpos = pos + ipmi_sdr_length(sdrh); > > if (trec == recid) { > if (nextrec) { > @@ -1179,7 +1179,7 @@ static void get_sdr(IPMIBmcSim *ibs, > > sdrh = (struct ipmi_sdr_header *) &ibs->sdr.sdr[pos]; > > - if (cmd[6] > sdrh->rec_length) { > + if (cmd[6] > ipmi_sdr_length(sdrh)) { > rsp[2] = IPMI_CC_PARM_OUT_OF_RANGE; > return; > } > @@ -1188,7 +1188,7 @@ static void get_sdr(IPMIBmcSim *ibs, > IPMI_ADD_RSP_DATA((nextrec >> 8) & 0xff); > > if (cmd[7] == 0xff) { > - cmd[7] = sdrh->rec_length - cmd[6]; > + cmd[7] = ipmi_sdr_length(sdrh) - cmd[6]; > } > > if ((cmd[7] + *rsp_len) > max_rsp_len) { > @@ -1659,22 +1659,22 @@ static void ipmi_sim_init(Object *obj) > for (i = 0;;) { > struct ipmi_sdr_header *sdrh; > int len; > - if ((i + 5) > sizeof(init_sdrs)) { > + if ((i + IPMI_SDR_HEADER_SIZE) > sizeof(init_sdrs)) { > error_report("Problem with recid 0x%4.4x", i); > return; > } > sdrh = (struct ipmi_sdr_header *) &init_sdrs[i]; > - len = sdrh->rec_length; > + len = ipmi_sdr_length(sdrh); > recid = ipmi_sdr_recid(sdrh); > if (recid == 0xffff) { > break; > } > - if ((i + len + 5) > sizeof(init_sdrs)) { > + if ((i + len) > sizeof(init_sdrs)) { > error_report("Problem with recid 0x%4.4x", i); > return; > } > sdr_add_entry(ibs, init_sdrs + i, len, NULL); > - i += len + 5; > + i += len; > } > > ipmi_init_sensors_from_sdrs(ibs); > diff --git a/include/hw/ipmi/ipmi.h b/include/hw/ipmi/ipmi.h > index 7e142e241dcb..74a2b5af9613 100644 > --- a/include/hw/ipmi/ipmi.h > +++ b/include/hw/ipmi/ipmi.h > @@ -219,6 +219,7 @@ struct ipmi_sdr_header { > #define IPMI_SDR_HEADER_SIZE sizeof(struct ipmi_sdr_header) > > #define ipmi_sdr_recid(sdr) ((sdr)->rec_id[0] | ((sdr)->rec_id[1] << 8)) > +#define ipmi_sdr_length(sdr) ((sdr)->rec_length + IPMI_SDR_HEADER_SIZE) > > /* > * 43.2 SDR Type 02h. Compact Sensor Record
On 01/22/2016 11:56 AM, Greg Kurz wrote: > On Thu, 21 Jan 2016 18:18:50 +0100 > Cédric Le Goater <clg@fr.ibm.com> wrote: >> The IPMI BMC simulator populates the SDR table with a set of initial >> SDRs. The length of each SDR is taken from the record itself (byte 4) >> which does not include the size of the header. But, the full length >> (header + data) is required by the sdr_add_entry() routine. >> >> Signed-off-by: Cédric Le Goater <clg@fr.ibm.com> > > The patch is good but IMHO it should come before patch 4 because this is bugfix > that could be applied right away, while patch 4 is code cleanup that may need > some more discussion. OK. I am fine with that. It should be the patch from v1. Thanks, C. >> --- >> hw/ipmi/ipmi_bmc_sim.c | 18 +++++++++--------- >> include/hw/ipmi/ipmi.h | 1 + >> 2 files changed, 10 insertions(+), 9 deletions(-) >> >> diff --git a/hw/ipmi/ipmi_bmc_sim.c b/hw/ipmi/ipmi_bmc_sim.c >> index 31f990199154..803c7e5130c0 100644 >> --- a/hw/ipmi/ipmi_bmc_sim.c >> +++ b/hw/ipmi/ipmi_bmc_sim.c >> @@ -327,11 +327,11 @@ static int sdr_add_entry(IPMIBmcSim *ibs, const uint8_t *entry, >> struct ipmi_sdr_header *sdrh = >> (struct ipmi_sdr_header *) &ibs->sdr.sdr[ibs->sdr.next_free]; >> >> - if ((len < 5) || (len > 255)) { >> + if ((len < IPMI_SDR_HEADER_SIZE) || (len > 255)) { >> return 1; >> } >> >> - if (sdrh_entry->rec_length != len - 5) { >> + if (ipmi_sdr_length(sdrh_entry) != len) { >> return 1; >> } >> >> @@ -364,7 +364,7 @@ static int sdr_find_entry(IPMISdr *sdr, uint16_t recid, >> struct ipmi_sdr_header *sdrh = >> (struct ipmi_sdr_header *) &sdr->sdr[pos]; >> uint16_t trec = ipmi_sdr_recid(sdrh); >> - unsigned int nextpos = pos + sdrh->rec_length; >> + unsigned int nextpos = pos + ipmi_sdr_length(sdrh); >> >> if (trec == recid) { >> if (nextrec) { >> @@ -1179,7 +1179,7 @@ static void get_sdr(IPMIBmcSim *ibs, >> >> sdrh = (struct ipmi_sdr_header *) &ibs->sdr.sdr[pos]; >> >> - if (cmd[6] > sdrh->rec_length) { >> + if (cmd[6] > ipmi_sdr_length(sdrh)) { >> rsp[2] = IPMI_CC_PARM_OUT_OF_RANGE; >> return; >> } >> @@ -1188,7 +1188,7 @@ static void get_sdr(IPMIBmcSim *ibs, >> IPMI_ADD_RSP_DATA((nextrec >> 8) & 0xff); >> >> if (cmd[7] == 0xff) { >> - cmd[7] = sdrh->rec_length - cmd[6]; >> + cmd[7] = ipmi_sdr_length(sdrh) - cmd[6]; >> } >> >> if ((cmd[7] + *rsp_len) > max_rsp_len) { >> @@ -1659,22 +1659,22 @@ static void ipmi_sim_init(Object *obj) >> for (i = 0;;) { >> struct ipmi_sdr_header *sdrh; >> int len; >> - if ((i + 5) > sizeof(init_sdrs)) { >> + if ((i + IPMI_SDR_HEADER_SIZE) > sizeof(init_sdrs)) { >> error_report("Problem with recid 0x%4.4x", i); >> return; >> } >> sdrh = (struct ipmi_sdr_header *) &init_sdrs[i]; >> - len = sdrh->rec_length; >> + len = ipmi_sdr_length(sdrh); >> recid = ipmi_sdr_recid(sdrh); >> if (recid == 0xffff) { >> break; >> } >> - if ((i + len + 5) > sizeof(init_sdrs)) { >> + if ((i + len) > sizeof(init_sdrs)) { >> error_report("Problem with recid 0x%4.4x", i); >> return; >> } >> sdr_add_entry(ibs, init_sdrs + i, len, NULL); >> - i += len + 5; >> + i += len; >> } >> >> ipmi_init_sensors_from_sdrs(ibs); >> diff --git a/include/hw/ipmi/ipmi.h b/include/hw/ipmi/ipmi.h >> index 7e142e241dcb..74a2b5af9613 100644 >> --- a/include/hw/ipmi/ipmi.h >> +++ b/include/hw/ipmi/ipmi.h >> @@ -219,6 +219,7 @@ struct ipmi_sdr_header { >> #define IPMI_SDR_HEADER_SIZE sizeof(struct ipmi_sdr_header) >> >> #define ipmi_sdr_recid(sdr) ((sdr)->rec_id[0] | ((sdr)->rec_id[1] << 8)) >> +#define ipmi_sdr_length(sdr) ((sdr)->rec_length + IPMI_SDR_HEADER_SIZE) >> >> /* >> * 43.2 SDR Type 02h. Compact Sensor Record >
diff --git a/hw/ipmi/ipmi_bmc_sim.c b/hw/ipmi/ipmi_bmc_sim.c index 31f990199154..803c7e5130c0 100644 --- a/hw/ipmi/ipmi_bmc_sim.c +++ b/hw/ipmi/ipmi_bmc_sim.c @@ -327,11 +327,11 @@ static int sdr_add_entry(IPMIBmcSim *ibs, const uint8_t *entry, struct ipmi_sdr_header *sdrh = (struct ipmi_sdr_header *) &ibs->sdr.sdr[ibs->sdr.next_free]; - if ((len < 5) || (len > 255)) { + if ((len < IPMI_SDR_HEADER_SIZE) || (len > 255)) { return 1; } - if (sdrh_entry->rec_length != len - 5) { + if (ipmi_sdr_length(sdrh_entry) != len) { return 1; } @@ -364,7 +364,7 @@ static int sdr_find_entry(IPMISdr *sdr, uint16_t recid, struct ipmi_sdr_header *sdrh = (struct ipmi_sdr_header *) &sdr->sdr[pos]; uint16_t trec = ipmi_sdr_recid(sdrh); - unsigned int nextpos = pos + sdrh->rec_length; + unsigned int nextpos = pos + ipmi_sdr_length(sdrh); if (trec == recid) { if (nextrec) { @@ -1179,7 +1179,7 @@ static void get_sdr(IPMIBmcSim *ibs, sdrh = (struct ipmi_sdr_header *) &ibs->sdr.sdr[pos]; - if (cmd[6] > sdrh->rec_length) { + if (cmd[6] > ipmi_sdr_length(sdrh)) { rsp[2] = IPMI_CC_PARM_OUT_OF_RANGE; return; } @@ -1188,7 +1188,7 @@ static void get_sdr(IPMIBmcSim *ibs, IPMI_ADD_RSP_DATA((nextrec >> 8) & 0xff); if (cmd[7] == 0xff) { - cmd[7] = sdrh->rec_length - cmd[6]; + cmd[7] = ipmi_sdr_length(sdrh) - cmd[6]; } if ((cmd[7] + *rsp_len) > max_rsp_len) { @@ -1659,22 +1659,22 @@ static void ipmi_sim_init(Object *obj) for (i = 0;;) { struct ipmi_sdr_header *sdrh; int len; - if ((i + 5) > sizeof(init_sdrs)) { + if ((i + IPMI_SDR_HEADER_SIZE) > sizeof(init_sdrs)) { error_report("Problem with recid 0x%4.4x", i); return; } sdrh = (struct ipmi_sdr_header *) &init_sdrs[i]; - len = sdrh->rec_length; + len = ipmi_sdr_length(sdrh); recid = ipmi_sdr_recid(sdrh); if (recid == 0xffff) { break; } - if ((i + len + 5) > sizeof(init_sdrs)) { + if ((i + len) > sizeof(init_sdrs)) { error_report("Problem with recid 0x%4.4x", i); return; } sdr_add_entry(ibs, init_sdrs + i, len, NULL); - i += len + 5; + i += len; } ipmi_init_sensors_from_sdrs(ibs); diff --git a/include/hw/ipmi/ipmi.h b/include/hw/ipmi/ipmi.h index 7e142e241dcb..74a2b5af9613 100644 --- a/include/hw/ipmi/ipmi.h +++ b/include/hw/ipmi/ipmi.h @@ -219,6 +219,7 @@ struct ipmi_sdr_header { #define IPMI_SDR_HEADER_SIZE sizeof(struct ipmi_sdr_header) #define ipmi_sdr_recid(sdr) ((sdr)->rec_id[0] | ((sdr)->rec_id[1] << 8)) +#define ipmi_sdr_length(sdr) ((sdr)->rec_length + IPMI_SDR_HEADER_SIZE) /* * 43.2 SDR Type 02h. Compact Sensor Record
The IPMI BMC simulator populates the SDR table with a set of initial SDRs. The length of each SDR is taken from the record itself (byte 4) which does not include the size of the header. But, the full length (header + data) is required by the sdr_add_entry() routine. Signed-off-by: Cédric Le Goater <clg@fr.ibm.com> --- hw/ipmi/ipmi_bmc_sim.c | 18 +++++++++--------- include/hw/ipmi/ipmi.h | 1 + 2 files changed, 10 insertions(+), 9 deletions(-)