diff mbox

[v2,02/10] hw/sd/sd.c: QOMify

Message ID 1453479402-14870-3-git-send-email-peter.maydell@linaro.org (mailing list archive)
State New, archived
Headers show

Commit Message

Peter Maydell Jan. 22, 2016, 4:16 p.m. UTC 
Turn the SD card into a QOM device.
This conversion only changes the device itself; the various
functions which are effectively methods on the device are not
touched at this point.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
---
 hw/sd/sd.c         | 99 ++++++++++++++++++++++++++++++++++++++++++------------
 include/hw/sd/sd.h |  3 ++
 2 files changed, 80 insertions(+), 22 deletions(-)

Comments

Alistair Francis Feb. 8, 2016, 11:06 p.m. UTC | #1 
On Fri, Jan 22, 2016 at 8:16 AM, Peter Maydell <peter.maydell@linaro.org> wrote:
> Turn the SD card into a QOM device.
> This conversion only changes the device itself; the various
> functions which are effectively methods on the device are not
> touched at this point.
>
> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>

Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>

Thanks,

Alistair

> ---
>  hw/sd/sd.c         | 99 ++++++++++++++++++++++++++++++++++++++++++------------
>  include/hw/sd/sd.h |  3 ++
>  2 files changed, 80 insertions(+), 22 deletions(-)
>
> diff --git a/hw/sd/sd.c b/hw/sd/sd.c
> index 1a9935c..745e9d6 100644
> --- a/hw/sd/sd.c
> +++ b/hw/sd/sd.c
> @@ -33,6 +33,8 @@
>  #include "sysemu/block-backend.h"
>  #include "hw/sd/sd.h"
>  #include "qemu/bitmap.h"
> +#include "hw/qdev-properties.h"
> +#include "qemu/error-report.h"
>
>  //#define DEBUG_SD 1
>
> @@ -77,6 +79,8 @@ enum SDCardStates {
>  };
>
>  struct SDState {
> +    DeviceState parent_obj;
> +
>      uint32_t mode;    /* current card mode, one of SDCardModes */
>      int32_t state;    /* current card state, one of SDCardStates */
>      uint32_t ocr;
> @@ -472,34 +476,26 @@ static const VMStateDescription sd_vmstate = {
>      }
>  };
>
> -/* We do not model the chip select pin, so allow the board to select
> -   whether card should be in SSI or MMC/SD mode.  It is also up to the
> -   board to ensure that ssi transfers only occur when the chip select
> -   is asserted.  */
> +/* Legacy initialization function for use by non-qdevified callers */
>  SDState *sd_init(BlockBackend *blk, bool is_spi)
>  {
> -    SDState *sd;
> +    DeviceState *dev;
> +    Error *err = NULL;
>
> -    if (blk && blk_is_read_only(blk)) {
> -        fprintf(stderr, "sd_init: Cannot use read-only drive\n");
> +    dev = qdev_create(NULL, TYPE_SD_CARD);
> +    qdev_prop_set_drive(dev, "drive", blk, &err);
> +    if (err) {
> +        error_report("sd_init failed: %s", error_get_pretty(err));
>          return NULL;
>      }
> -
> -    sd = (SDState *) g_malloc0(sizeof(SDState));
> -    sd->buf = blk_blockalign(blk, 512);
> -    sd->spi = is_spi;
> -    sd->enable = true;
> -    sd->blk = blk;
> -    sd_reset(sd);
> -    if (sd->blk) {
> -        /* Attach dev if not already attached.  (This call ignores an
> -         * error return code if sd->blk is already attached.) */
> -        /* FIXME ignoring blk_attach_dev() failure is dangerously brittle */
> -        blk_attach_dev(sd->blk, sd);
> -        blk_set_dev_ops(sd->blk, &sd_block_ops, sd);
> +    qdev_prop_set_bit(dev, "spi", is_spi);
> +    object_property_set_bool(OBJECT(dev), true, "realized", &err);
> +    if (err) {
> +        error_report("sd_init failed: %s", error_get_pretty(err));
> +        return NULL;
>      }
> -    vmstate_register(NULL, -1, &sd_vmstate, sd);
> -    return sd;
> +
> +    return SD_CARD(dev);
>  }
>
>  void sd_set_cb(SDState *sd, qemu_irq readonly, qemu_irq insert)
> @@ -1765,3 +1761,62 @@ void sd_enable(SDState *sd, bool enable)
>  {
>      sd->enable = enable;
>  }
> +
> +static void sd_instance_init(Object *obj)
> +{
> +    SDState *sd = SD_CARD(obj);
> +
> +    sd->enable = true;
> +}
> +
> +static void sd_realize(DeviceState *dev, Error **errp)
> +{
> +    SDState *sd = SD_CARD(dev);
> +
> +    if (sd->blk && blk_is_read_only(sd->blk)) {
> +        error_setg(errp, "Cannot use read-only drive as SD card");
> +        return;
> +    }
> +
> +    sd->buf = blk_blockalign(sd->blk, 512);
> +
> +    if (sd->blk) {
> +        blk_set_dev_ops(sd->blk, &sd_block_ops, sd);
> +    }
> +
> +    sd_reset(sd);
> +}
> +
> +static Property sd_properties[] = {
> +    DEFINE_PROP_DRIVE("drive", SDState, blk),
> +    /* We do not model the chip select pin, so allow the board to select
> +     * whether card should be in SSI or MMC/SD mode.  It is also up to the
> +     * board to ensure that ssi transfers only occur when the chip select
> +     * is asserted.  */
> +    DEFINE_PROP_BOOL("spi", SDState, spi, false),
> +    DEFINE_PROP_END_OF_LIST()
> +};
> +
> +static void sd_class_init(ObjectClass *klass, void *data)
> +{
> +    DeviceClass *dc = DEVICE_CLASS(klass);
> +
> +    dc->realize = sd_realize;
> +    dc->props = sd_properties;
> +    dc->vmsd = &sd_vmstate;
> +}
> +
> +static const TypeInfo sd_info = {
> +    .name = TYPE_SD_CARD,
> +    .parent = TYPE_DEVICE,
> +    .instance_size = sizeof(SDState),
> +    .class_init = sd_class_init,
> +    .instance_init = sd_instance_init,
> +};
> +
> +static void sd_register_types(void)
> +{
> +    type_register_static(&sd_info);
> +}
> +
> +type_init(sd_register_types)
> diff --git a/include/hw/sd/sd.h b/include/hw/sd/sd.h
> index 79adb5b..404d589 100644
> --- a/include/hw/sd/sd.h
> +++ b/include/hw/sd/sd.h
> @@ -68,6 +68,9 @@ typedef struct {
>
>  typedef struct SDState SDState;
>
> +#define TYPE_SD_CARD "sd-card"
> +#define SD_CARD(obj) OBJECT_CHECK(SDState, (obj), TYPE_SD_CARD)
> +
>  SDState *sd_init(BlockBackend *bs, bool is_spi);
>  int sd_do_command(SDState *sd, SDRequest *req,
>                    uint8_t *response);
> --
> 1.9.1
>
>
diff mbox

Patch

diff --git a/hw/sd/sd.c b/hw/sd/sd.c
index 1a9935c..745e9d6 100644
--- a/hw/sd/sd.c
+++ b/hw/sd/sd.c
@@ -33,6 +33,8 @@ 
 #include "sysemu/block-backend.h"
 #include "hw/sd/sd.h"
 #include "qemu/bitmap.h"
+#include "hw/qdev-properties.h"
+#include "qemu/error-report.h"
 
 //#define DEBUG_SD 1
 
@@ -77,6 +79,8 @@  enum SDCardStates {
 };
 
 struct SDState {
+    DeviceState parent_obj;
+
     uint32_t mode;    /* current card mode, one of SDCardModes */
     int32_t state;    /* current card state, one of SDCardStates */
     uint32_t ocr;
@@ -472,34 +476,26 @@  static const VMStateDescription sd_vmstate = {
     }
 };
 
-/* We do not model the chip select pin, so allow the board to select
-   whether card should be in SSI or MMC/SD mode.  It is also up to the
-   board to ensure that ssi transfers only occur when the chip select
-   is asserted.  */
+/* Legacy initialization function for use by non-qdevified callers */
 SDState *sd_init(BlockBackend *blk, bool is_spi)
 {
-    SDState *sd;
+    DeviceState *dev;
+    Error *err = NULL;
 
-    if (blk && blk_is_read_only(blk)) {
-        fprintf(stderr, "sd_init: Cannot use read-only drive\n");
+    dev = qdev_create(NULL, TYPE_SD_CARD);
+    qdev_prop_set_drive(dev, "drive", blk, &err);
+    if (err) {
+        error_report("sd_init failed: %s", error_get_pretty(err));
         return NULL;
     }
-
-    sd = (SDState *) g_malloc0(sizeof(SDState));
-    sd->buf = blk_blockalign(blk, 512);
-    sd->spi = is_spi;
-    sd->enable = true;
-    sd->blk = blk;
-    sd_reset(sd);
-    if (sd->blk) {
-        /* Attach dev if not already attached.  (This call ignores an
-         * error return code if sd->blk is already attached.) */
-        /* FIXME ignoring blk_attach_dev() failure is dangerously brittle */
-        blk_attach_dev(sd->blk, sd);
-        blk_set_dev_ops(sd->blk, &sd_block_ops, sd);
+    qdev_prop_set_bit(dev, "spi", is_spi);
+    object_property_set_bool(OBJECT(dev), true, "realized", &err);
+    if (err) {
+        error_report("sd_init failed: %s", error_get_pretty(err));
+        return NULL;
     }
-    vmstate_register(NULL, -1, &sd_vmstate, sd);
-    return sd;
+
+    return SD_CARD(dev);
 }
 
 void sd_set_cb(SDState *sd, qemu_irq readonly, qemu_irq insert)
@@ -1765,3 +1761,62 @@  void sd_enable(SDState *sd, bool enable)
 {
     sd->enable = enable;
 }
+
+static void sd_instance_init(Object *obj)
+{
+    SDState *sd = SD_CARD(obj);
+
+    sd->enable = true;
+}
+
+static void sd_realize(DeviceState *dev, Error **errp)
+{
+    SDState *sd = SD_CARD(dev);
+
+    if (sd->blk && blk_is_read_only(sd->blk)) {
+        error_setg(errp, "Cannot use read-only drive as SD card");
+        return;
+    }
+
+    sd->buf = blk_blockalign(sd->blk, 512);
+
+    if (sd->blk) {
+        blk_set_dev_ops(sd->blk, &sd_block_ops, sd);
+    }
+
+    sd_reset(sd);
+}
+
+static Property sd_properties[] = {
+    DEFINE_PROP_DRIVE("drive", SDState, blk),
+    /* We do not model the chip select pin, so allow the board to select
+     * whether card should be in SSI or MMC/SD mode.  It is also up to the
+     * board to ensure that ssi transfers only occur when the chip select
+     * is asserted.  */
+    DEFINE_PROP_BOOL("spi", SDState, spi, false),
+    DEFINE_PROP_END_OF_LIST()
+};
+
+static void sd_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+
+    dc->realize = sd_realize;
+    dc->props = sd_properties;
+    dc->vmsd = &sd_vmstate;
+}
+
+static const TypeInfo sd_info = {
+    .name = TYPE_SD_CARD,
+    .parent = TYPE_DEVICE,
+    .instance_size = sizeof(SDState),
+    .class_init = sd_class_init,
+    .instance_init = sd_instance_init,
+};
+
+static void sd_register_types(void)
+{
+    type_register_static(&sd_info);
+}
+
+type_init(sd_register_types)
diff --git a/include/hw/sd/sd.h b/include/hw/sd/sd.h
index 79adb5b..404d589 100644
--- a/include/hw/sd/sd.h
+++ b/include/hw/sd/sd.h
@@ -68,6 +68,9 @@  typedef struct {
 
 typedef struct SDState SDState;
 
+#define TYPE_SD_CARD "sd-card"
+#define SD_CARD(obj) OBJECT_CHECK(SDState, (obj), TYPE_SD_CARD)
+
 SDState *sd_init(BlockBackend *bs, bool is_spi);
 int sd_do_command(SDState *sd, SDRequest *req,
                   uint8_t *response);