[PULL,17/20] sdhci: Revert "add optional quirk property to disable card insertion/removal interrupts"

Commit Message

Peter Maydell Feb. 26, 2016, 3:20 p.m. UTC

From: Andrew Baumann <[e-mail]>

This reverts commit 723697551a7e926abe7d3c7f2966012b8075143d.

This change was poorly tested on my part. It squelched card insertion
interrupts on reset, but that was not necessary because sdhci_reset()
clears all the registers (via the call to memset), so the subsequent
sdhci_insert_eject_cb() call never sees the card insert interrupt
enabled. However, not calling the insert_eject_cb results in prnsts
remaining 0, when it actually needs to be updated to indicate card
presence and R/O status.

Signed-off-by: Andrew Baumann <[e-mail]>
Message-id: [e-mail]
Signed-off-by: Peter Maydell <[e-mail]>
---
 hw/sd/sdhci.c         | 9 +++------
 include/hw/sd/sdhci.h | 1 -
 2 files changed, 3 insertions(+), 7 deletions(-)

Patch

diff --git a/hw/sd/sdhci.c b/hw/sd/sdhci.c
index 73e7c87..f175b30 100644
--- a/hw/sd/sdhci.c
+++ b/hw/sd/sdhci.c
@@ -198,11 +198,9 @@  static void sdhci_reset(SDHCIState *s)
      * initialization */
     memset(&s->sdmasysad, 0, (uintptr_t)&s->capareg - (uintptr_t)&s->sdmasysad);
 
-    if (!s->noeject_quirk) {
-        /* Reset other state based on current card insertion/readonly status */
-        sdhci_set_inserted(dev, sdbus_get_inserted(&s->sdbus));
-        sdhci_set_readonly(dev, sdbus_get_readonly(&s->sdbus));
-    }
+    /* Reset other state based on current card insertion/readonly status */
+    sdhci_set_inserted(dev, sdbus_get_inserted(&s->sdbus));
+    sdhci_set_readonly(dev, sdbus_get_readonly(&s->sdbus));
 
     s->data_count = 0;
     s->stopped_state = sdhc_not_stopped;
@@ -1275,7 +1273,6 @@  static Property sdhci_sysbus_properties[] = {
     DEFINE_PROP_UINT32("capareg", SDHCIState, capareg,
             SDHC_CAPAB_REG_DEFAULT),
     DEFINE_PROP_UINT32("maxcurr", SDHCIState, maxcurr, 0),
-    DEFINE_PROP_BOOL("noeject-quirk", SDHCIState, noeject_quirk, false),
     DEFINE_PROP_END_OF_LIST(),
 };
 
diff --git a/include/hw/sd/sdhci.h b/include/hw/sd/sdhci.h
index 607a83e..4816516 100644
--- a/include/hw/sd/sdhci.h
+++ b/include/hw/sd/sdhci.h
@@ -76,7 +76,6 @@  typedef struct SDHCIState {
     uint32_t buf_maxsz;
     uint16_t data_count;   /* current element in FIFO buffer */
     uint8_t  stopped_state;/* Current SDHC state */
-    bool     noeject_quirk;/* Quirk to disable card insert/remove interrupts */
     /* Buffer Data Port Register - virtual access point to R and W buffers */
     /* Software Reset Register - always reads as 0 */
     /* Force Event Auto CMD12 Error Interrupt Reg - write only */