@@ -23,6 +23,8 @@ block-obj-$(CONFIG_LIBSSH2) += ssh.o
block-obj-y += accounting.o
block-obj-y += write-threshold.o
+block-obj-y += crypto.o
+
common-obj-y += stream.o
common-obj-y += commit.o
common-obj-y += backup.o
new file mode 100644
@@ -0,0 +1,579 @@
+/*
+ * QEMU block full disk encryption
+ *
+ * Copyright (c) 2015-2016 Red Hat, Inc.
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#include "qemu/osdep.h"
+
+#include "block/block_int.h"
+#include "crypto/block.h"
+#include "qapi/opts-visitor.h"
+#include "qapi-visit.h"
+
+#define BLOCK_CRYPTO_OPT_LUKS_KEY_SECRET "key-secret"
+#define BLOCK_CRYPTO_OPT_LUKS_CIPHER_ALG "cipher-alg"
+#define BLOCK_CRYPTO_OPT_LUKS_CIPHER_MODE "cipher-mode"
+#define BLOCK_CRYPTO_OPT_LUKS_IVGEN_ALG "ivgen-alg"
+#define BLOCK_CRYPTO_OPT_LUKS_IVGEN_HASH_ALG "ivgen-hash-alg"
+#define BLOCK_CRYPTO_OPT_LUKS_HASH_ALG "hash-alg"
+
+typedef struct BlockCrypto BlockCrypto;
+
+struct BlockCrypto {
+ QCryptoBlock *block;
+ CoMutex lock;
+};
+
+
+static int block_crypto_probe_generic(QCryptoBlockFormat format,
+ const uint8_t *buf,
+ int buf_size,
+ const char *filename)
+{
+ if (qcrypto_block_has_format(format,
+ buf, buf_size)) {
+ return 100;
+ } else {
+ return 0;
+ }
+}
+
+
+static ssize_t block_crypto_read_func(QCryptoBlock *block,
+ size_t offset,
+ uint8_t *buf,
+ size_t buflen,
+ Error **errp,
+ void *opaque)
+{
+ BlockDriverState *bs = opaque;
+ ssize_t ret;
+
+ ret = bdrv_pread(bs->file->bs, offset, buf, buflen);
+ if (ret < 0) {
+ error_setg_errno(errp, -ret, "Could not read encryption header");
+ return ret;
+ }
+ return ret;
+}
+
+
+struct BlockCryptoCreateData {
+ const char *filename;
+ QemuOpts *opts;
+ BlockDriverState *bs;
+ uint64_t size;
+};
+
+
+static ssize_t block_crypto_write_func(QCryptoBlock *block,
+ size_t offset,
+ const uint8_t *buf,
+ size_t buflen,
+ Error **errp,
+ void *opaque)
+{
+ struct BlockCryptoCreateData *data = opaque;
+ ssize_t ret;
+
+ ret = bdrv_pwrite(data->bs, offset, buf, buflen);
+ if (ret < 0) {
+ error_setg_errno(errp, -ret, "Could not write encryption header");
+ return ret;
+ }
+ return ret;
+}
+
+
+static ssize_t block_crypto_init_func(QCryptoBlock *block,
+ size_t headerlen,
+ Error **errp,
+ void *opaque)
+{
+ struct BlockCryptoCreateData *data = opaque;
+ int ret;
+
+ /* User provided size should reflect amount of space made
+ * available to the guest, so we must take account of that
+ * which will be used by the crypto header
+ */
+ data->size += headerlen;
+
+ qemu_opt_set_number(data->opts, BLOCK_OPT_SIZE, data->size, &error_abort);
+ ret = bdrv_create_file(data->filename, data->opts, errp);
+ if (ret < 0) {
+ return -1;
+ }
+
+ ret = bdrv_open(&data->bs, data->filename, NULL, NULL,
+ BDRV_O_RDWR | BDRV_O_PROTOCOL, errp);
+ if (ret < 0) {
+ return -1;
+ }
+
+ return 0;
+}
+
+
+static QemuOptsList block_crypto_runtime_opts_luks = {
+ .name = "crypto",
+ .head = QTAILQ_HEAD_INITIALIZER(block_crypto_runtime_opts_luks.head),
+ .desc = {
+ {
+ .name = BLOCK_CRYPTO_OPT_LUKS_KEY_SECRET,
+ .type = QEMU_OPT_STRING,
+ .help = "ID of the secret that provides the encryption key",
+ },
+ { /* end of list */ }
+ },
+};
+
+
+static QemuOptsList block_crypto_create_opts_luks = {
+ .name = "crypto",
+ .head = QTAILQ_HEAD_INITIALIZER(block_crypto_create_opts_luks.head),
+ .desc = {
+ {
+ .name = BLOCK_OPT_SIZE,
+ .type = QEMU_OPT_SIZE,
+ .help = "Virtual disk size"
+ },
+ {
+ .name = BLOCK_CRYPTO_OPT_LUKS_KEY_SECRET,
+ .type = QEMU_OPT_STRING,
+ .help = "ID of the secret that provides the encryption key",
+ },
+ {
+ .name = BLOCK_CRYPTO_OPT_LUKS_CIPHER_ALG,
+ .type = QEMU_OPT_STRING,
+ .help = "Name of encryption cipher algorithm",
+ },
+ {
+ .name = BLOCK_CRYPTO_OPT_LUKS_CIPHER_MODE,
+ .type = QEMU_OPT_STRING,
+ .help = "Name of encryption cipher mode",
+ },
+ {
+ .name = BLOCK_CRYPTO_OPT_LUKS_IVGEN_ALG,
+ .type = QEMU_OPT_STRING,
+ .help = "Name of IV generator algorithm",
+ },
+ {
+ .name = BLOCK_CRYPTO_OPT_LUKS_IVGEN_HASH_ALG,
+ .type = QEMU_OPT_STRING,
+ .help = "Name of IV generator hash algorithm",
+ },
+ {
+ .name = BLOCK_CRYPTO_OPT_LUKS_HASH_ALG,
+ .type = QEMU_OPT_STRING,
+ .help = "Name of encryption hash algorithm",
+ },
+ { /* end of list */ }
+ },
+};
+
+
+static QCryptoBlockOpenOptions *
+block_crypto_open_opts_init(QCryptoBlockFormat format,
+ QemuOpts *opts,
+ Error **errp)
+{
+ OptsVisitor *ov;
+ QCryptoBlockOpenOptions *ret;
+ QCryptoBlockOptionsLUKS *tmp;
+ Error *local_err = NULL;
+
+ ret = g_new0(QCryptoBlockOpenOptions, 1);
+ ret->format = format;
+
+ ov = opts_visitor_new(opts);
+
+ switch (format) {
+ case Q_CRYPTO_BLOCK_FORMAT_LUKS:
+ visit_type_QCryptoBlockOptionsLUKS(opts_get_visitor(ov), "luks",
+ &tmp, &local_err);
+ if (!local_err) {
+ memcpy(&ret->u.luks, tmp, sizeof(*tmp));
+ g_free(tmp);
+ }
+ break;
+
+ default:
+ error_setg(&local_err, "Unsupported block format %d", format);
+ break;
+ }
+
+ if (local_err) {
+ error_propagate(errp, local_err);
+ opts_visitor_cleanup(ov);
+ qapi_free_QCryptoBlockOpenOptions(ret);
+ return NULL;
+ }
+
+ opts_visitor_cleanup(ov);
+ return ret;
+}
+
+
+static QCryptoBlockCreateOptions *
+block_crypto_create_opts_init(QCryptoBlockFormat format,
+ QemuOpts *opts,
+ Error **errp)
+{
+ OptsVisitor *ov;
+ QCryptoBlockCreateOptions *ret;
+ QCryptoBlockCreateOptionsLUKS *tmp;
+ Error *local_err = NULL;
+
+ ret = g_new0(QCryptoBlockCreateOptions, 1);
+ ret->format = format;
+
+ ov = opts_visitor_new(opts);
+
+ switch (format) {
+ case Q_CRYPTO_BLOCK_FORMAT_LUKS:
+ visit_type_QCryptoBlockCreateOptionsLUKS(opts_get_visitor(ov), "luks",
+ &tmp, &local_err);
+ if (!local_err) {
+ memcpy(&ret->u.luks, tmp, sizeof(*tmp));
+ g_free(tmp);
+ }
+ break;
+
+ default:
+ error_setg(&local_err, "Unsupported block format %d", format);
+ break;
+ }
+
+ if (local_err) {
+ error_propagate(errp, local_err);
+ opts_visitor_cleanup(ov);
+ qapi_free_QCryptoBlockCreateOptions(ret);
+ return NULL;
+ }
+
+ opts_visitor_cleanup(ov);
+ return ret;
+}
+
+
+static int block_crypto_open_generic(QCryptoBlockFormat format,
+ QemuOptsList *opts_spec,
+ BlockDriverState *bs,
+ QDict *options,
+ int flags,
+ Error **errp)
+{
+ BlockCrypto *crypto = bs->opaque;
+ QemuOpts *opts = NULL;
+ Error *local_err = NULL;
+ int ret = -EINVAL;
+ QCryptoBlockOpenOptions *open_opts = NULL;
+ unsigned int cflags = 0;
+
+ opts = qemu_opts_create(opts_spec, NULL, 0, &error_abort);
+ qemu_opts_absorb_qdict(opts, options, &local_err);
+ if (local_err) {
+ error_propagate(errp, local_err);
+ goto cleanup;
+ }
+
+ open_opts = block_crypto_open_opts_init(format, opts, errp);
+ if (!open_opts) {
+ goto cleanup;
+ }
+
+ if (flags & BDRV_O_NO_IO) {
+ cflags |= QCRYPTO_BLOCK_OPEN_NO_IO;
+ }
+ crypto->block = qcrypto_block_open(open_opts,
+ block_crypto_read_func,
+ bs,
+ cflags,
+ errp);
+
+ if (!crypto->block) {
+ ret = -EIO;
+ goto cleanup;
+ }
+
+ bs->encrypted = 1;
+ bs->valid_key = 1;
+
+ qemu_co_mutex_init(&crypto->lock);
+
+ ret = 0;
+ cleanup:
+ qapi_free_QCryptoBlockOpenOptions(open_opts);
+ return ret;
+}
+
+
+static int block_crypto_create_generic(QCryptoBlockFormat format,
+ const char *filename,
+ QemuOpts *opts,
+ Error **errp)
+{
+ int ret = -EINVAL;
+ QCryptoBlockCreateOptions *create_opts = NULL;
+ QCryptoBlock *crypto = NULL;
+ struct BlockCryptoCreateData data;
+
+ data.size = ROUND_UP(qemu_opt_get_size_del(opts, BLOCK_OPT_SIZE, 0),
+ BDRV_SECTOR_SIZE);
+ data.opts = opts;
+ data.filename = filename;
+ data.bs = NULL;
+
+ create_opts = block_crypto_create_opts_init(format, opts, errp);
+ if (!create_opts) {
+ return -1;
+ }
+
+ crypto = qcrypto_block_create(create_opts,
+ block_crypto_init_func,
+ block_crypto_write_func,
+ &data,
+ errp);
+
+ if (!crypto) {
+ ret = -EIO;
+ goto cleanup;
+ }
+
+ ret = 0;
+ cleanup:
+ qcrypto_block_free(crypto);
+ bdrv_unref(data.bs);
+ qapi_free_QCryptoBlockCreateOptions(create_opts);
+ return ret;
+}
+
+static void block_crypto_close(BlockDriverState *bs)
+{
+ BlockCrypto *crypto = bs->opaque;
+ qcrypto_block_free(crypto->block);
+}
+
+
+#define BLOCK_CRYPTO_MAX_SECTORS 32
+
+static coroutine_fn int
+block_crypto_co_readv(BlockDriverState *bs, int64_t sector_num,
+ int remaining_sectors, QEMUIOVector *qiov)
+{
+ BlockCrypto *crypto = bs->opaque;
+ int cur_nr_sectors; /* number of sectors in current iteration */
+ uint64_t bytes_done = 0;
+ uint8_t *cipher_data = NULL;
+ QEMUIOVector hd_qiov;
+ int ret = 0;
+ size_t payload_offset =
+ qcrypto_block_get_payload_offset(crypto->block) / 512;
+
+ qemu_iovec_init(&hd_qiov, qiov->niov);
+
+ qemu_co_mutex_lock(&crypto->lock);
+
+ /* Bounce buffer so we have a linear mem region for
+ * entire sector. XXX optimize so we avoid bounce
+ * buffer in case that qiov->niov == 1
+ */
+ cipher_data =
+ qemu_try_blockalign(bs->file->bs, BLOCK_CRYPTO_MAX_SECTORS * 512);
+ if (cipher_data == NULL) {
+ ret = -ENOMEM;
+ goto cleanup;
+ }
+
+ while (remaining_sectors) {
+ cur_nr_sectors = remaining_sectors;
+
+ if (cur_nr_sectors > BLOCK_CRYPTO_MAX_SECTORS) {
+ cur_nr_sectors = BLOCK_CRYPTO_MAX_SECTORS;
+ }
+
+ qemu_iovec_reset(&hd_qiov);
+ qemu_iovec_add(&hd_qiov, cipher_data, cur_nr_sectors * 512);
+
+ qemu_co_mutex_unlock(&crypto->lock);
+ ret = bdrv_co_readv(bs->file->bs,
+ payload_offset + sector_num,
+ cur_nr_sectors, &hd_qiov);
+ qemu_co_mutex_lock(&crypto->lock);
+ if (ret < 0) {
+ goto cleanup;
+ }
+
+ if (qcrypto_block_decrypt(crypto->block,
+ sector_num,
+ cipher_data, cur_nr_sectors * 512,
+ NULL) < 0) {
+ ret = -1;
+ goto cleanup;
+ }
+
+ qemu_iovec_from_buf(qiov, bytes_done,
+ cipher_data, cur_nr_sectors * 512);
+
+ remaining_sectors -= cur_nr_sectors;
+ sector_num += cur_nr_sectors;
+ bytes_done += cur_nr_sectors * 512;
+ }
+
+ cleanup:
+ qemu_co_mutex_unlock(&crypto->lock);
+
+ qemu_iovec_destroy(&hd_qiov);
+ qemu_vfree(cipher_data);
+
+ return ret;
+}
+
+
+static coroutine_fn int
+block_crypto_co_writev(BlockDriverState *bs, int64_t sector_num,
+ int remaining_sectors, QEMUIOVector *qiov)
+{
+ BlockCrypto *crypto = bs->opaque;
+ int cur_nr_sectors; /* number of sectors in current iteration */
+ uint64_t bytes_done = 0;
+ uint8_t *cipher_data = NULL;
+ QEMUIOVector hd_qiov;
+ int ret = 0;
+ size_t payload_offset =
+ qcrypto_block_get_payload_offset(crypto->block) / 512;
+
+ qemu_iovec_init(&hd_qiov, qiov->niov);
+
+ qemu_co_mutex_lock(&crypto->lock);
+
+ /* Bounce buffer so we have a linear mem region for
+ * entire sector. XXX optimize so we avoid bounce
+ * buffer in case that qiov->niov == 1
+ */
+ cipher_data =
+ qemu_try_blockalign(bs->file->bs, BLOCK_CRYPTO_MAX_SECTORS * 512);
+ if (cipher_data == NULL) {
+ ret = -ENOMEM;
+ goto cleanup;
+ }
+
+ while (remaining_sectors) {
+ cur_nr_sectors = remaining_sectors;
+
+ if (cur_nr_sectors > BLOCK_CRYPTO_MAX_SECTORS) {
+ cur_nr_sectors = BLOCK_CRYPTO_MAX_SECTORS;
+ }
+
+ qemu_iovec_to_buf(qiov, bytes_done,
+ cipher_data, cur_nr_sectors * 512);
+
+ if (qcrypto_block_encrypt(crypto->block,
+ sector_num,
+ cipher_data, cur_nr_sectors * 512,
+ NULL) < 0) {
+ ret = -1;
+ goto cleanup;
+ }
+
+ qemu_iovec_reset(&hd_qiov);
+ qemu_iovec_add(&hd_qiov, cipher_data, cur_nr_sectors * 512);
+
+ qemu_co_mutex_unlock(&crypto->lock);
+ ret = bdrv_co_writev(bs->file->bs,
+ payload_offset + sector_num,
+ cur_nr_sectors, &hd_qiov);
+ qemu_co_mutex_lock(&crypto->lock);
+ if (ret < 0) {
+ goto cleanup;
+ }
+
+ remaining_sectors -= cur_nr_sectors;
+ sector_num += cur_nr_sectors;
+ bytes_done += cur_nr_sectors * 512;
+ }
+
+ cleanup:
+ qemu_co_mutex_unlock(&crypto->lock);
+
+ qemu_iovec_destroy(&hd_qiov);
+ qemu_vfree(cipher_data);
+
+ return ret;
+}
+
+
+static int64_t block_crypto_getlength(BlockDriverState *bs)
+{
+ BlockCrypto *crypto = bs->opaque;
+ int64_t len = bdrv_getlength(bs->file->bs);
+
+ ssize_t offset = qcrypto_block_get_payload_offset(crypto->block);
+
+ len -= offset;
+
+ return len;
+}
+
+
+static int block_crypto_probe_luks(const uint8_t *buf,
+ int buf_size,
+ const char *filename) {
+ return block_crypto_probe_generic(Q_CRYPTO_BLOCK_FORMAT_LUKS,
+ buf, buf_size, filename);
+}
+
+static int block_crypto_open_luks(BlockDriverState *bs,
+ QDict *options,
+ int flags,
+ Error **errp)
+{
+ return block_crypto_open_generic(Q_CRYPTO_BLOCK_FORMAT_LUKS,
+ &block_crypto_runtime_opts_luks,
+ bs, options, flags, errp);
+}
+
+static int block_crypto_create_luks(const char *filename,
+ QemuOpts *opts,
+ Error **errp)
+{
+ return block_crypto_create_generic(Q_CRYPTO_BLOCK_FORMAT_LUKS,
+ filename, opts, errp);
+}
+
+BlockDriver bdrv_crypto_luks = {
+ .format_name = "luks",
+ .instance_size = sizeof(BlockCrypto),
+ .bdrv_probe = block_crypto_probe_luks,
+ .bdrv_open = block_crypto_open_luks,
+ .bdrv_close = block_crypto_close,
+ .bdrv_create = block_crypto_create_luks,
+ .create_opts = &block_crypto_create_opts_luks,
+
+ .bdrv_co_readv = block_crypto_co_readv,
+ .bdrv_co_writev = block_crypto_co_writev,
+ .bdrv_getlength = block_crypto_getlength,
+};
+
+static void block_crypto_init(void)
+{
+ bdrv_register(&bdrv_crypto_luks);
+}
+
+block_init(block_crypto_init);
@@ -242,11 +242,12 @@
# @drv: the name of the block format used to open the backing device. As of
# 0.14.0 this can be: 'blkdebug', 'bochs', 'cloop', 'cow', 'dmg',
# 'file', 'file', 'ftp', 'ftps', 'host_cdrom', 'host_device',
-# 'http', 'https', 'nbd', 'parallels', 'qcow',
+# 'http', 'https', 'luks', 'nbd', 'parallels', 'qcow',
# 'qcow2', 'raw', 'tftp', 'vdi', 'vmdk', 'vpc', 'vvfat'
# 2.2: 'archipelago' added, 'cow' dropped
# 2.3: 'host_floppy' deprecated
# 2.5: 'host_floppy' dropped
+# 2.6: 'luks' added
#
# @backing_file: #optional the name of the backing file (for copy-on-write)
#
@@ -1639,7 +1640,7 @@
{ 'enum': 'BlockdevDriver',
'data': [ 'archipelago', 'blkdebug', 'blkverify', 'bochs', 'cloop',
'dmg', 'file', 'ftp', 'ftps', 'host_cdrom', 'host_device',
- 'http', 'https', 'null-aio', 'null-co', 'parallels',
+ 'http', 'https', 'luks', 'null-aio', 'null-co', 'parallels',
'qcow', 'qcow2', 'qed', 'quorum', 'raw', 'tftp', 'vdi', 'vhdx',
'vmdk', 'vpc', 'vvfat' ] }
@@ -1757,6 +1758,22 @@
'data': { 'file': 'BlockdevRef' } }
##
+# @BlockdevOptionsLUKS
+#
+# Driver specific block device options for LUKS.
+#
+# @key-secret: #optional the ID of a QCryptoSecret object providing
+# the decryption key (since 2.6). Mandatory except when
+# doing a metadata-only probe of the image.
+#
+# Since: 2.6
+##
+{ 'struct': 'BlockdevOptionsLUKS',
+ 'base': 'BlockdevOptionsGenericFormat',
+ 'data': { '*key-secret': 'str' } }
+
+
+##
# @BlockdevOptionsGenericCOWFormat
#
# Driver specific block device options for image format that have no option
@@ -2093,6 +2110,7 @@
'http': 'BlockdevOptionsFile',
'https': 'BlockdevOptionsFile',
# TODO iscsi: Wait for structured options
+ 'luks': 'BlockdevOptionsLUKS',
# TODO nbd: Should take InetSocketAddress for 'host'?
# TODO nfs: Wait for structured options
'null-aio': 'BlockdevOptionsNull',
new file mode 100755
@@ -0,0 +1,521 @@
+#!/usr/bin/python
+#
+# Copyright (C) 2016 Red Hat, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+#
+# Creator/Owner: Daniel P. Berrange <berrange@redhat.com>
+#
+# Exercise the QEMU 'luks' block driver to validate interoperability
+# with the Linux dm-crypt + cryptsetup implementation
+
+import subprocess
+import os
+import os.path
+
+import base64
+
+os.environ["QEMU_IO_OPTIONS"] = os.environ["QEMU_IO_OPTIONS_NO_FMT"]
+
+import iotests
+
+
+class LUKSConfig(object):
+ """Represent configuration parameters for a single LUKS
+ setup to be tested"""
+
+ def __init__(self, name, cipher, keylen, mode, ivgen,
+ ivgen_hash, hash, password=None, passwords=None):
+
+ self.name = name
+ self.cipher = cipher
+ self.keylen = keylen
+ self.mode = mode
+ self.ivgen = ivgen
+ self.ivgen_hash = ivgen_hash
+ self.hash = hash
+
+ if passwords is not None:
+ self.passwords = passwords
+ else:
+ self.passwords = {}
+
+ if password is None:
+ self.passwords["0"] = "123456"
+ else:
+ self.passwords["0"] = password
+
+ def __repr__(self):
+ return self.name
+
+ def image_name(self):
+ return "luks-%s.img" % self.name
+
+ def image_path(self):
+ return os.path.join(iotests.test_dir, self.image_name())
+
+ def device_name(self):
+ return "qiotest-145-%s" % self.name
+
+ def device_path(self):
+ return "/dev/mapper/" + self.device_name()
+
+ def first_password(self):
+ for i in range(8):
+ slot = str(i)
+ if slot in self.passwords:
+ return (self.passwords[slot], slot)
+ raise Exception("No password found")
+
+ def first_password_base64(self):
+ (pw, slot) = self.first_password()
+ return base64.b64encode(pw)
+
+ def active_slots(self):
+ slots = []
+ for i in range(8):
+ slot = str(i)
+ if slot in self.passwords:
+ slots.append(slot)
+ return slots
+
+def verify_passwordless_sudo():
+ """Check whether sudo is configured to allow
+ password-less access to commands"""
+
+ args = ["sudo", "-n", "/bin/true"]
+
+ proc = subprocess.Popen(args,
+ stdin=subprocess.PIPE,
+ stdout=subprocess.PIPE,
+ stderr=subprocess.STDOUT)
+
+ msg = proc.communicate()[0]
+
+ if proc.returncode != 0:
+ iotests.notrun('requires password-less sudo access: %s' % msg)
+
+
+def cryptsetup(args, password=None):
+ """Run the cryptsetup command in batch mode"""
+
+ fullargs = ["sudo", "cryptsetup", "-q", "-v"]
+ fullargs.extend(args)
+
+ iotests.log(" ".join(fullargs), filters=[iotests.filter_test_dir])
+ proc = subprocess.Popen(fullargs,
+ stdin=subprocess.PIPE,
+ stdout=subprocess.PIPE,
+ stderr=subprocess.STDOUT)
+
+ msg = proc.communicate(password)[0]
+
+ if proc.returncode != 0:
+ raise Exception(msg)
+
+
+def cryptsetup_add_password(config, slot):
+ """Add another password to a LUKS key slot"""
+
+ (password, mainslot) = config.first_password()
+
+ pwfile = os.path.join(iotests.test_dir, "passwd.txt")
+ with open(pwfile, "w") as fh:
+ fh.write(config.passwords[slot])
+
+ try:
+ args = ["luksAddKey", config.image_path(),
+ "--key-slot", slot,
+ "--key-file", "-",
+ pwfile]
+
+ cryptsetup(args, password)
+ finally:
+ os.unlink(pwfile)
+
+
+def cryptsetup_format(config):
+ """Format a new LUKS volume with cryptsetup, adding the
+ first key slot only"""
+
+ (password, slot) = config.first_password()
+
+ args = ["luksFormat"]
+ cipher = config.cipher + "-" + config.mode + "-" + config.ivgen
+ if config.ivgen_hash is not None:
+ cipher = cipher + ":" + config.ivgen_hash
+ args.extend(["--cipher", cipher])
+ if config.mode == "xts":
+ args.extend(["--key-size", str(config.keylen * 2)])
+ else:
+ args.extend(["--key-size", str(config.keylen)])
+ if config.hash is not None:
+ args.extend(["--hash", config.hash])
+ args.extend(["--key-slot", slot])
+ args.extend(["--key-file", "-"])
+ args.append(config.image_path())
+
+ cryptsetup(args, password)
+
+
+def chown(config):
+ """Set the ownership of a open LUKS device to this user"""
+
+ path = config.device_path()
+
+ args = ["sudo", "chown", "%d:%d" % (os.getuid(), os.getgid()), path]
+ iotests.log(" ".join(args), filters=[iotests.filter_chown])
+ proc = subprocess.Popen(args,
+ stdin=subprocess.PIPE,
+ stdout=subprocess.PIPE,
+ stderr=subprocess.STDOUT)
+
+ msg = proc.communicate()[0]
+
+ if proc.returncode != 0:
+ raise Exception("Cannot change owner on %s" % path)
+
+
+def cryptsetup_open(config):
+ """Open an image as a LUKS device"""
+
+ (password, slot) = config.first_password()
+
+ args = ["luksOpen", config.image_path(), config.device_name()]
+
+ cryptsetup(args, password)
+
+
+def cryptsetup_close(config):
+ """Close an active LUKS device """
+
+ args = ["luksClose", config.device_name()]
+ cryptsetup(args)
+
+
+def delete_image(config):
+ """Delete a disk image"""
+
+ try:
+ os.unlink(config.image_path())
+ iotests.log("unlink %s" % config.image_path(),
+ filters=[iotests.filter_test_dir])
+ except Exception as e:
+ pass
+
+
+def create_image(config, size_mb):
+ """Create a bare disk image with requested size"""
+
+ delete_image(config)
+ iotests.log("truncate %s --size %dMB" % (config.image_path(), size_mb),
+ filters=[iotests.filter_test_dir])
+ with open(config.image_path(), "w") as fn:
+ fn.truncate(size_mb * 1024 * 1024)
+
+
+def qemu_img_create(config, size_mb):
+ """Create and format a disk image with LUKS using qemu-img"""
+
+ opts = [
+ "key-secret=sec0",
+ "cipher-alg=%s-%d" % (config.cipher, config.keylen),
+ "cipher-mode=%s" % config.mode,
+ "ivgen-alg=%s" % config.ivgen,
+ "hash-alg=%s" % config.hash,
+ ]
+ if config.ivgen_hash is not None:
+ opts.append("ivgen-hash-alg=%s" % config.ivgen_hash)
+
+ args = ["create", "-f", "luks",
+ "--object",
+ ("secret,id=sec0,data=%s,format=base64" %
+ config.first_password_base64()),
+ "-o", ",".join(opts),
+ config.image_path(),
+ "%dM" % size_mb]
+
+ iotests.log("qemu-img " + " ".join(args), filters=[iotests.filter_test_dir])
+ iotests.log(iotests.qemu_img_pipe(*args), filters=[iotests.filter_test_dir])
+
+def qemu_io_image_args(config, dev=False):
+ """Get the args for access an image or device with qemu-io"""
+
+ if dev:
+ return [
+ "--image-opts",
+ "driver=file,filename=%s" % config.device_path()]
+ else:
+ return [
+ "--object",
+ ("secret,id=sec0,data=%s,format=base64" %
+ config.first_password_base64()),
+ "--image-opts",
+ ("driver=luks,key-secret=sec0,file.filename=%s" %
+ config.image_path())]
+
+def qemu_io_write_pattern(config, pattern, offset_mb, size_mb, dev=False):
+ """Write a pattern of data to a LUKS image or device"""
+
+ args = ["-c", "write -P 0x%x %dM %dM" % (pattern, offset_mb, size_mb)]
+ args.extend(qemu_io_image_args(config, dev))
+ iotests.log("qemu-io " + " ".join(args), filters=[iotests.filter_test_dir])
+ iotests.log(iotests.qemu_io(*args), filters=[iotests.filter_test_dir,
+ iotests.filter_qemu_io])
+
+
+def qemu_io_read_pattern(config, pattern, offset_mb, size_mb, dev=False):
+ """Read a pattern of data to a LUKS image or device"""
+
+ args = ["-c", "read -P 0x%x %dM %dM" % (pattern, offset_mb, size_mb)]
+ args.extend(qemu_io_image_args(config, dev))
+ iotests.log("qemu-io " + " ".join(args), filters=[iotests.filter_test_dir])
+ iotests.log(iotests.qemu_io(*args), filters=[iotests.filter_test_dir,
+ iotests.filter_qemu_io])
+
+
+def test_once(config, qemu_img=False):
+ """Run the test with a desired LUKS configuration. Can either
+ use qemu-img for creating the initial volume, or cryptsetup,
+ in order to test interoperability in both directions"""
+
+ iotests.log("# ================= %s %s =================" % (
+ "qemu-img" if qemu_img else "dm-crypt", config))
+
+ oneKB = 1024
+ oneMB = oneKB * 1024
+ oneGB = oneMB * 1024
+ oneTB = oneGB * 1024
+
+ # 4 TB, so that we pass the 32-bit sector number boundary.
+ # Important for testing correctness of some IV generators
+ # The files are sparse, so not actually using this much space
+ image_size = 4 * oneTB
+ if qemu_img:
+ iotests.log("# Create image")
+ qemu_img_create(config, image_size / oneMB)
+ else:
+ iotests.log("# Create image")
+ create_image(config, image_size / oneMB)
+
+ lowOffsetMB = 100
+ highOffsetMB = 3 * oneTB / oneMB
+
+ try:
+ if not qemu_img:
+ iotests.log("# Format image")
+ cryptsetup_format(config)
+
+ for slot in config.active_slots()[1:]:
+ iotests.log("# Add password slot %s" % slot)
+ cryptsetup_add_password(config, slot)
+
+ # First we'll open the image using cryptsetup and write a
+ # known pattern of data that we'll then verify with QEMU
+
+ iotests.log("# Open dev")
+ cryptsetup_open(config)
+
+ try:
+ iotests.log("# Set dev owner")
+ chown(config)
+
+ iotests.log("# Write test pattern 0xa7")
+ qemu_io_write_pattern(config, 0xa7, lowOffsetMB, 10, dev=True)
+ iotests.log("# Write test pattern 0x13")
+ qemu_io_write_pattern(config, 0x13, highOffsetMB, 10, dev=True)
+ finally:
+ iotests.log("# Close dev")
+ cryptsetup_close(config)
+
+ # Ok, now we're using QEMU to verify the pattern just
+ # written via dm-crypt
+
+ iotests.log("# Read test pattern 0xa7")
+ qemu_io_read_pattern(config, 0xa7, lowOffsetMB, 10, dev=False)
+ iotests.log("# Read test pattern 0x13")
+ qemu_io_read_pattern(config, 0x13, highOffsetMB, 10, dev=False)
+
+
+ # Write a new pattern to the image, which we'll later
+ # verify with dm-crypt
+ iotests.log("# Write test pattern 0x91")
+ qemu_io_write_pattern(config, 0x91, lowOffsetMB, 10, dev=False)
+ iotests.log("# Write test pattern 0x5e")
+ qemu_io_write_pattern(config, 0x5e, highOffsetMB, 10, dev=False)
+
+
+ # Now we're opening the image with dm-crypt once more
+ # and verifying what QEMU wrote, completing the circle
+ iotests.log("# Open dev")
+ cryptsetup_open(config)
+
+ try:
+ iotests.log("# Set dev owner")
+ chown(config)
+
+ iotests.log("# Read test pattern 0x91")
+ qemu_io_read_pattern(config, 0x91, lowOffsetMB, 10, dev=True)
+ iotests.log("# Read test pattern 0x5e")
+ qemu_io_read_pattern(config, 0x5e, highOffsetMB, 10, dev=True)
+ finally:
+ iotests.log("# Close dev")
+ cryptsetup_close(config)
+ finally:
+ iotests.log("# Delete image")
+ delete_image(config)
+ print
+
+
+# Obviously we only work with the luks image format
+iotests.verify_image_format(supported_fmts=['luks'])
+iotests.verify_platform()
+
+# We need sudo in order to run cryptsetup to create
+# dm-crypt devices. This is safe to use on any
+# machine, since all dm-crypt devices are backed
+# by newly created plain files, and have a dm-crypt
+# name prefix of 'qiotest' to avoid clashing with
+# user LUKS volumes
+verify_passwordless_sudo()
+
+
+# If we look at all permutations of cipher, key size,
+# mode, ivgen, hash, there are ~1000 possible configs.
+#
+# We certainly don't want/need to test every permutation
+# to get good validation of interoperability between QEMU
+# and dm-crypt/cryptsetup.
+#
+# The configs below are a representative set that aim to
+# exercise each axis of configurability.
+#
+configs = [
+ # A common LUKS default
+ LUKSConfig("aes-256-xts-plain64-sha1",
+ "aes", 256, "xts", "plain64", None, "sha1"),
+
+
+ # LUKS default but diff ciphers
+ LUKSConfig("twofish-256-xts-plain64-sha1",
+ "twofish", 256, "xts", "plain64", None, "sha1"),
+ LUKSConfig("serpent-256-xts-plain64-sha1",
+ "serpent", 256, "xts", "plain64", None, "sha1"),
+ # Should really be xts, but kernel doesn't support xts+cast5
+ # nor does it do essiv+cast5
+ LUKSConfig("cast5-128-cbc-plain64-sha1",
+ "cast5", 128, "cbc", "plain64", None, "sha1"),
+ LUKSConfig("cast6-256-xts-plain64-sha1",
+ "cast6", 256, "xts", "plain64", None, "sha1"),
+
+
+ # LUKS default but diff modes / ivgens
+ LUKSConfig("aes-256-cbc-plain-sha1",
+ "aes", 256, "cbc", "plain", None, "sha1"),
+ LUKSConfig("aes-256-cbc-plain64-sha1",
+ "aes", 256, "cbc", "plain64", None, "sha1"),
+ LUKSConfig("aes-256-cbc-essiv-sha256-sha1",
+ "aes", 256, "cbc", "essiv", "sha256", "sha1"),
+ LUKSConfig("aes-256-xts-essiv-sha256-sha1",
+ "aes", 256, "xts", "essiv", "sha256", "sha1"),
+
+
+ # LUKS default but smaller key sizes
+ LUKSConfig("aes-128-xts-plain64-sha256-sha1",
+ "aes", 128, "xts", "plain64", None, "sha1"),
+ LUKSConfig("aes-192-xts-plain64-sha256-sha1",
+ "aes", 192, "xts", "plain64", None, "sha1"),
+
+ LUKSConfig("twofish-128-xts-plain64-sha1",
+ "twofish", 128, "xts", "plain64", None, "sha1"),
+ LUKSConfig("twofish-192-xts-plain64-sha1",
+ "twofish", 192, "xts", "plain64", None, "sha1"),
+
+ LUKSConfig("serpent-128-xts-plain64-sha1",
+ "serpent", 128, "xts", "plain64", None, "sha1"),
+ LUKSConfig("serpent-192-xts-plain64-sha1",
+ "serpent", 192, "xts", "plain64", None, "sha1"),
+
+ LUKSConfig("cast6-128-xts-plain64-sha1",
+ "cast6", 128, "xts", "plain", None, "sha1"),
+ LUKSConfig("cast6-192-xts-plain64-sha1",
+ "cast6", 192, "xts", "plain64", None, "sha1"),
+
+
+ # LUKS default but diff hash
+ LUKSConfig("aes-256-xts-plain64-sha256",
+ "aes", 256, "xts", "plain64", None, "sha256"),
+ LUKSConfig("aes-256-xts-plain64-sha512",
+ "aes", 256, "xts", "plain64", None, "sha512"),
+ LUKSConfig("aes-256-xts-plain64-ripemd160",
+ "aes", 256, "xts", "plain64", None, "ripemd160"),
+
+ # Password in slot 3
+ LUKSConfig("aes-256-xts-plain-sha1-pwslot3",
+ "aes", 256, "xts", "plain", None, "sha1",
+ passwords={
+ "3": "slot3",
+ }),
+
+ # Passwords in every slot
+ LUKSConfig("aes-256-xts-plain-sha1-pwallslots",
+ "aes", 256, "xts", "plain", None, "sha1",
+ passwords={
+ "0": "slot1",
+ "1": "slot1",
+ "2": "slot2",
+ "3": "slot3",
+ "4": "slot4",
+ "5": "slot5",
+ "6": "slot6",
+ "7": "slot7",
+ }),
+]
+
+blacklist = [
+ # We don't have a cast-6 cipher impl for QEMU yet
+ "cast6-256-xts-plain64-sha1",
+ "cast6-128-xts-plain64-sha1",
+ "cast6-192-xts-plain64-sha1",
+
+ # GCrypt doesn't support Twofish with 192 bit key
+ "twofish-192-xts-plain64-sha1",
+
+ # We don't have sha512 hash wired up yet
+ "aes-256-xts-plain64-sha512",
+
+ # We don't have ripemd160 hash wired up yet
+ "aes-256-xts-plain64-ripemd160",
+]
+
+whitelist = []
+if "LUKS_CONFIG" in os.environ:
+ whitelist = os.environ["LUKS_CONFIG"].split(",")
+
+for config in configs:
+ if config.name in blacklist:
+ iotests.log("Skipping %s in blacklist" % config.name)
+ continue
+
+ if len(whitelist) > 0 and config.name not in whitelist:
+ iotests.log("Skipping %s not in whitelist" % config.name)
+ continue
+
+ test_once(config, qemu_img=False)
+
+ # XXX we should support setting passwords in a non-0
+ # key slot with 'qemu-img create' in future
+ (pw, slot) = config.first_password()
+ if slot == "0":
+ test_once(config, qemu_img=True)
new file mode 100644
@@ -0,0 +1,2252 @@
+# ================= dm-crypt aes-256-xts-plain64-sha1 =================
+# Create image
+truncate TEST_DIR/luks-aes-256-xts-plain64-sha1.img --size 4194304MB
+# Format image
+sudo cryptsetup -q -v luksFormat --cipher aes-xts-plain64 --key-size 512 --hash sha1 --key-slot 0 --key-file - TEST_DIR/luks-aes-256-xts-plain64-sha1.img
+# Open dev
+sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha1.img qiotest-145-aes-256-xts-plain64-sha1
+# Set dev owner
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
+# Write test pattern 0xa7
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
+wrote 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x13
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
+wrote 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Close dev
+sudo cryptsetup -q -v luksClose qiotest-145-aes-256-xts-plain64-sha1
+# Read test pattern 0xa7
+qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain64-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+read 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Read test pattern 0x13
+qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain64-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+read 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x91
+qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain64-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+wrote 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x5e
+qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain64-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+wrote 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Open dev
+sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha1.img qiotest-145-aes-256-xts-plain64-sha1
+# Set dev owner
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
+# Read test pattern 0x91
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
+read 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Read test pattern 0x5e
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
+read 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Close dev
+sudo cryptsetup -q -v luksClose qiotest-145-aes-256-xts-plain64-sha1
+# Delete image
+unlink TEST_DIR/luks-aes-256-xts-plain64-sha1.img
+
+# ================= qemu-img aes-256-xts-plain64-sha1 =================
+# Create image
+qemu-img create -f luks --object secret,id=sec0,data=MTIzNDU2,format=base64 -o key-secret=sec0,cipher-alg=aes-256,cipher-mode=xts,ivgen-alg=plain64,hash-alg=sha1 TEST_DIR/luks-aes-256-xts-plain64-sha1.img 4194304M
+Formatting 'TEST_DIR/luks-aes-256-xts-plain64-sha1.img', fmt=luks size=4398046511104 key-secret=sec0 cipher-alg=aes-256 cipher-mode=xts ivgen-alg=plain64 hash-alg=sha1
+
+# Open dev
+sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha1.img qiotest-145-aes-256-xts-plain64-sha1
+# Set dev owner
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
+# Write test pattern 0xa7
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
+wrote 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x13
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
+wrote 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Close dev
+sudo cryptsetup -q -v luksClose qiotest-145-aes-256-xts-plain64-sha1
+# Read test pattern 0xa7
+qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain64-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+read 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Read test pattern 0x13
+qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain64-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+read 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x91
+qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain64-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+wrote 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x5e
+qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain64-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+wrote 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Open dev
+sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha1.img qiotest-145-aes-256-xts-plain64-sha1
+# Set dev owner
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
+# Read test pattern 0x91
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
+read 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Read test pattern 0x5e
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
+read 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Close dev
+sudo cryptsetup -q -v luksClose qiotest-145-aes-256-xts-plain64-sha1
+# Delete image
+unlink TEST_DIR/luks-aes-256-xts-plain64-sha1.img
+
+# ================= dm-crypt twofish-256-xts-plain64-sha1 =================
+# Create image
+truncate TEST_DIR/luks-twofish-256-xts-plain64-sha1.img --size 4194304MB
+# Format image
+sudo cryptsetup -q -v luksFormat --cipher twofish-xts-plain64 --key-size 512 --hash sha1 --key-slot 0 --key-file - TEST_DIR/luks-twofish-256-xts-plain64-sha1.img
+# Open dev
+sudo cryptsetup -q -v luksOpen TEST_DIR/luks-twofish-256-xts-plain64-sha1.img qiotest-145-twofish-256-xts-plain64-sha1
+# Set dev owner
+sudo chown UID:GID /dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
+# Write test pattern 0xa7
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
+wrote 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x13
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
+wrote 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Close dev
+sudo cryptsetup -q -v luksClose qiotest-145-twofish-256-xts-plain64-sha1
+# Read test pattern 0xa7
+qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-twofish-256-xts-plain64-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+read 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Read test pattern 0x13
+qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-twofish-256-xts-plain64-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+read 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x91
+qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-twofish-256-xts-plain64-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+wrote 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x5e
+qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-twofish-256-xts-plain64-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+wrote 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Open dev
+sudo cryptsetup -q -v luksOpen TEST_DIR/luks-twofish-256-xts-plain64-sha1.img qiotest-145-twofish-256-xts-plain64-sha1
+# Set dev owner
+sudo chown UID:GID /dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
+# Read test pattern 0x91
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
+read 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Read test pattern 0x5e
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
+read 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Close dev
+sudo cryptsetup -q -v luksClose qiotest-145-twofish-256-xts-plain64-sha1
+# Delete image
+unlink TEST_DIR/luks-twofish-256-xts-plain64-sha1.img
+
+# ================= qemu-img twofish-256-xts-plain64-sha1 =================
+# Create image
+qemu-img create -f luks --object secret,id=sec0,data=MTIzNDU2,format=base64 -o key-secret=sec0,cipher-alg=twofish-256,cipher-mode=xts,ivgen-alg=plain64,hash-alg=sha1 TEST_DIR/luks-twofish-256-xts-plain64-sha1.img 4194304M
+Formatting 'TEST_DIR/luks-twofish-256-xts-plain64-sha1.img', fmt=luks size=4398046511104 key-secret=sec0 cipher-alg=twofish-256 cipher-mode=xts ivgen-alg=plain64 hash-alg=sha1
+
+# Open dev
+sudo cryptsetup -q -v luksOpen TEST_DIR/luks-twofish-256-xts-plain64-sha1.img qiotest-145-twofish-256-xts-plain64-sha1
+# Set dev owner
+sudo chown UID:GID /dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
+# Write test pattern 0xa7
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
+wrote 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x13
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
+wrote 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Close dev
+sudo cryptsetup -q -v luksClose qiotest-145-twofish-256-xts-plain64-sha1
+# Read test pattern 0xa7
+qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-twofish-256-xts-plain64-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+read 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Read test pattern 0x13
+qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-twofish-256-xts-plain64-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+read 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x91
+qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-twofish-256-xts-plain64-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+wrote 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x5e
+qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-twofish-256-xts-plain64-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+wrote 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Open dev
+sudo cryptsetup -q -v luksOpen TEST_DIR/luks-twofish-256-xts-plain64-sha1.img qiotest-145-twofish-256-xts-plain64-sha1
+# Set dev owner
+sudo chown UID:GID /dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
+# Read test pattern 0x91
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
+read 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Read test pattern 0x5e
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
+read 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Close dev
+sudo cryptsetup -q -v luksClose qiotest-145-twofish-256-xts-plain64-sha1
+# Delete image
+unlink TEST_DIR/luks-twofish-256-xts-plain64-sha1.img
+
+# ================= dm-crypt serpent-256-xts-plain64-sha1 =================
+# Create image
+truncate TEST_DIR/luks-serpent-256-xts-plain64-sha1.img --size 4194304MB
+# Format image
+sudo cryptsetup -q -v luksFormat --cipher serpent-xts-plain64 --key-size 512 --hash sha1 --key-slot 0 --key-file - TEST_DIR/luks-serpent-256-xts-plain64-sha1.img
+# Open dev
+sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-256-xts-plain64-sha1.img qiotest-145-serpent-256-xts-plain64-sha1
+# Set dev owner
+sudo chown UID:GID /dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
+# Write test pattern 0xa7
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
+wrote 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x13
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
+wrote 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Close dev
+sudo cryptsetup -q -v luksClose qiotest-145-serpent-256-xts-plain64-sha1
+# Read test pattern 0xa7
+qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-256-xts-plain64-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+read 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Read test pattern 0x13
+qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-256-xts-plain64-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+read 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x91
+qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-256-xts-plain64-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+wrote 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x5e
+qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-256-xts-plain64-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+wrote 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Open dev
+sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-256-xts-plain64-sha1.img qiotest-145-serpent-256-xts-plain64-sha1
+# Set dev owner
+sudo chown UID:GID /dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
+# Read test pattern 0x91
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
+read 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Read test pattern 0x5e
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
+read 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Close dev
+sudo cryptsetup -q -v luksClose qiotest-145-serpent-256-xts-plain64-sha1
+# Delete image
+unlink TEST_DIR/luks-serpent-256-xts-plain64-sha1.img
+
+# ================= qemu-img serpent-256-xts-plain64-sha1 =================
+# Create image
+qemu-img create -f luks --object secret,id=sec0,data=MTIzNDU2,format=base64 -o key-secret=sec0,cipher-alg=serpent-256,cipher-mode=xts,ivgen-alg=plain64,hash-alg=sha1 TEST_DIR/luks-serpent-256-xts-plain64-sha1.img 4194304M
+Formatting 'TEST_DIR/luks-serpent-256-xts-plain64-sha1.img', fmt=luks size=4398046511104 key-secret=sec0 cipher-alg=serpent-256 cipher-mode=xts ivgen-alg=plain64 hash-alg=sha1
+
+# Open dev
+sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-256-xts-plain64-sha1.img qiotest-145-serpent-256-xts-plain64-sha1
+# Set dev owner
+sudo chown UID:GID /dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
+# Write test pattern 0xa7
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
+wrote 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x13
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
+wrote 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Close dev
+sudo cryptsetup -q -v luksClose qiotest-145-serpent-256-xts-plain64-sha1
+# Read test pattern 0xa7
+qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-256-xts-plain64-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+read 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Read test pattern 0x13
+qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-256-xts-plain64-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+read 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x91
+qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-256-xts-plain64-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+wrote 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x5e
+qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-256-xts-plain64-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+wrote 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Open dev
+sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-256-xts-plain64-sha1.img qiotest-145-serpent-256-xts-plain64-sha1
+# Set dev owner
+sudo chown UID:GID /dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
+# Read test pattern 0x91
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
+read 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Read test pattern 0x5e
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
+read 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Close dev
+sudo cryptsetup -q -v luksClose qiotest-145-serpent-256-xts-plain64-sha1
+# Delete image
+unlink TEST_DIR/luks-serpent-256-xts-plain64-sha1.img
+
+# ================= dm-crypt cast5-128-cbc-plain64-sha1 =================
+# Create image
+truncate TEST_DIR/luks-cast5-128-cbc-plain64-sha1.img --size 4194304MB
+# Format image
+sudo cryptsetup -q -v luksFormat --cipher cast5-cbc-plain64 --key-size 128 --hash sha1 --key-slot 0 --key-file - TEST_DIR/luks-cast5-128-cbc-plain64-sha1.img
+# Open dev
+sudo cryptsetup -q -v luksOpen TEST_DIR/luks-cast5-128-cbc-plain64-sha1.img qiotest-145-cast5-128-cbc-plain64-sha1
+# Set dev owner
+sudo chown UID:GID /dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
+# Write test pattern 0xa7
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
+wrote 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x13
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
+wrote 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Close dev
+sudo cryptsetup -q -v luksClose qiotest-145-cast5-128-cbc-plain64-sha1
+# Read test pattern 0xa7
+qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-cast5-128-cbc-plain64-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+read 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Read test pattern 0x13
+qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-cast5-128-cbc-plain64-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+read 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x91
+qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-cast5-128-cbc-plain64-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+wrote 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x5e
+qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-cast5-128-cbc-plain64-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+wrote 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Open dev
+sudo cryptsetup -q -v luksOpen TEST_DIR/luks-cast5-128-cbc-plain64-sha1.img qiotest-145-cast5-128-cbc-plain64-sha1
+# Set dev owner
+sudo chown UID:GID /dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
+# Read test pattern 0x91
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
+read 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Read test pattern 0x5e
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
+read 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Close dev
+sudo cryptsetup -q -v luksClose qiotest-145-cast5-128-cbc-plain64-sha1
+# Delete image
+unlink TEST_DIR/luks-cast5-128-cbc-plain64-sha1.img
+
+# ================= qemu-img cast5-128-cbc-plain64-sha1 =================
+# Create image
+qemu-img create -f luks --object secret,id=sec0,data=MTIzNDU2,format=base64 -o key-secret=sec0,cipher-alg=cast5-128,cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha1 TEST_DIR/luks-cast5-128-cbc-plain64-sha1.img 4194304M
+Formatting 'TEST_DIR/luks-cast5-128-cbc-plain64-sha1.img', fmt=luks size=4398046511104 key-secret=sec0 cipher-alg=cast5-128 cipher-mode=cbc ivgen-alg=plain64 hash-alg=sha1
+
+# Open dev
+sudo cryptsetup -q -v luksOpen TEST_DIR/luks-cast5-128-cbc-plain64-sha1.img qiotest-145-cast5-128-cbc-plain64-sha1
+# Set dev owner
+sudo chown UID:GID /dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
+# Write test pattern 0xa7
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
+wrote 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x13
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
+wrote 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Close dev
+sudo cryptsetup -q -v luksClose qiotest-145-cast5-128-cbc-plain64-sha1
+# Read test pattern 0xa7
+qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-cast5-128-cbc-plain64-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+read 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Read test pattern 0x13
+qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-cast5-128-cbc-plain64-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+read 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x91
+qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-cast5-128-cbc-plain64-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+wrote 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x5e
+qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-cast5-128-cbc-plain64-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+wrote 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Open dev
+sudo cryptsetup -q -v luksOpen TEST_DIR/luks-cast5-128-cbc-plain64-sha1.img qiotest-145-cast5-128-cbc-plain64-sha1
+# Set dev owner
+sudo chown UID:GID /dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
+# Read test pattern 0x91
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
+read 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Read test pattern 0x5e
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
+read 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Close dev
+sudo cryptsetup -q -v luksClose qiotest-145-cast5-128-cbc-plain64-sha1
+# Delete image
+unlink TEST_DIR/luks-cast5-128-cbc-plain64-sha1.img
+
+Skipping cast6-256-xts-plain64-sha1 in blacklist
+# ================= dm-crypt aes-256-cbc-plain-sha1 =================
+# Create image
+truncate TEST_DIR/luks-aes-256-cbc-plain-sha1.img --size 4194304MB
+# Format image
+sudo cryptsetup -q -v luksFormat --cipher aes-cbc-plain --key-size 256 --hash sha1 --key-slot 0 --key-file - TEST_DIR/luks-aes-256-cbc-plain-sha1.img
+# Open dev
+sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-plain-sha1.img qiotest-145-aes-256-cbc-plain-sha1
+# Set dev owner
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
+# Write test pattern 0xa7
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
+wrote 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x13
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
+wrote 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Close dev
+sudo cryptsetup -q -v luksClose qiotest-145-aes-256-cbc-plain-sha1
+# Read test pattern 0xa7
+qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-plain-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+read 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Read test pattern 0x13
+qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-plain-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+read 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x91
+qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-plain-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+wrote 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x5e
+qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-plain-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+wrote 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Open dev
+sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-plain-sha1.img qiotest-145-aes-256-cbc-plain-sha1
+# Set dev owner
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
+# Read test pattern 0x91
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
+read 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Read test pattern 0x5e
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
+read 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Close dev
+sudo cryptsetup -q -v luksClose qiotest-145-aes-256-cbc-plain-sha1
+# Delete image
+unlink TEST_DIR/luks-aes-256-cbc-plain-sha1.img
+
+# ================= qemu-img aes-256-cbc-plain-sha1 =================
+# Create image
+qemu-img create -f luks --object secret,id=sec0,data=MTIzNDU2,format=base64 -o key-secret=sec0,cipher-alg=aes-256,cipher-mode=cbc,ivgen-alg=plain,hash-alg=sha1 TEST_DIR/luks-aes-256-cbc-plain-sha1.img 4194304M
+Formatting 'TEST_DIR/luks-aes-256-cbc-plain-sha1.img', fmt=luks size=4398046511104 key-secret=sec0 cipher-alg=aes-256 cipher-mode=cbc ivgen-alg=plain hash-alg=sha1
+
+# Open dev
+sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-plain-sha1.img qiotest-145-aes-256-cbc-plain-sha1
+# Set dev owner
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
+# Write test pattern 0xa7
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
+wrote 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x13
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
+wrote 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Close dev
+sudo cryptsetup -q -v luksClose qiotest-145-aes-256-cbc-plain-sha1
+# Read test pattern 0xa7
+qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-plain-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+read 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Read test pattern 0x13
+qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-plain-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+read 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x91
+qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-plain-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+wrote 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x5e
+qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-plain-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+wrote 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Open dev
+sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-plain-sha1.img qiotest-145-aes-256-cbc-plain-sha1
+# Set dev owner
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
+# Read test pattern 0x91
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
+read 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Read test pattern 0x5e
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
+read 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Close dev
+sudo cryptsetup -q -v luksClose qiotest-145-aes-256-cbc-plain-sha1
+# Delete image
+unlink TEST_DIR/luks-aes-256-cbc-plain-sha1.img
+
+# ================= dm-crypt aes-256-cbc-plain64-sha1 =================
+# Create image
+truncate TEST_DIR/luks-aes-256-cbc-plain64-sha1.img --size 4194304MB
+# Format image
+sudo cryptsetup -q -v luksFormat --cipher aes-cbc-plain64 --key-size 256 --hash sha1 --key-slot 0 --key-file - TEST_DIR/luks-aes-256-cbc-plain64-sha1.img
+# Open dev
+sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-plain64-sha1.img qiotest-145-aes-256-cbc-plain64-sha1
+# Set dev owner
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
+# Write test pattern 0xa7
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
+wrote 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x13
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
+wrote 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Close dev
+sudo cryptsetup -q -v luksClose qiotest-145-aes-256-cbc-plain64-sha1
+# Read test pattern 0xa7
+qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-plain64-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+read 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Read test pattern 0x13
+qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-plain64-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+read 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x91
+qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-plain64-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+wrote 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x5e
+qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-plain64-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+wrote 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Open dev
+sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-plain64-sha1.img qiotest-145-aes-256-cbc-plain64-sha1
+# Set dev owner
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
+# Read test pattern 0x91
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
+read 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Read test pattern 0x5e
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
+read 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Close dev
+sudo cryptsetup -q -v luksClose qiotest-145-aes-256-cbc-plain64-sha1
+# Delete image
+unlink TEST_DIR/luks-aes-256-cbc-plain64-sha1.img
+
+# ================= qemu-img aes-256-cbc-plain64-sha1 =================
+# Create image
+qemu-img create -f luks --object secret,id=sec0,data=MTIzNDU2,format=base64 -o key-secret=sec0,cipher-alg=aes-256,cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha1 TEST_DIR/luks-aes-256-cbc-plain64-sha1.img 4194304M
+Formatting 'TEST_DIR/luks-aes-256-cbc-plain64-sha1.img', fmt=luks size=4398046511104 key-secret=sec0 cipher-alg=aes-256 cipher-mode=cbc ivgen-alg=plain64 hash-alg=sha1
+
+# Open dev
+sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-plain64-sha1.img qiotest-145-aes-256-cbc-plain64-sha1
+# Set dev owner
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
+# Write test pattern 0xa7
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
+wrote 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x13
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
+wrote 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Close dev
+sudo cryptsetup -q -v luksClose qiotest-145-aes-256-cbc-plain64-sha1
+# Read test pattern 0xa7
+qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-plain64-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+read 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Read test pattern 0x13
+qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-plain64-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+read 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x91
+qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-plain64-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+wrote 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x5e
+qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-plain64-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+wrote 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Open dev
+sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-plain64-sha1.img qiotest-145-aes-256-cbc-plain64-sha1
+# Set dev owner
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
+# Read test pattern 0x91
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
+read 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Read test pattern 0x5e
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
+read 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Close dev
+sudo cryptsetup -q -v luksClose qiotest-145-aes-256-cbc-plain64-sha1
+# Delete image
+unlink TEST_DIR/luks-aes-256-cbc-plain64-sha1.img
+
+# ================= dm-crypt aes-256-cbc-essiv-sha256-sha1 =================
+# Create image
+truncate TEST_DIR/luks-aes-256-cbc-essiv-sha256-sha1.img --size 4194304MB
+# Format image
+sudo cryptsetup -q -v luksFormat --cipher aes-cbc-essiv:sha256 --key-size 256 --hash sha1 --key-slot 0 --key-file - TEST_DIR/luks-aes-256-cbc-essiv-sha256-sha1.img
+# Open dev
+sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-essiv-sha256-sha1.img qiotest-145-aes-256-cbc-essiv-sha256-sha1
+# Set dev owner
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
+# Write test pattern 0xa7
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
+wrote 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x13
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
+wrote 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Close dev
+sudo cryptsetup -q -v luksClose qiotest-145-aes-256-cbc-essiv-sha256-sha1
+# Read test pattern 0xa7
+qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-essiv-sha256-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+read 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Read test pattern 0x13
+qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-essiv-sha256-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+read 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x91
+qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-essiv-sha256-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+wrote 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x5e
+qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-essiv-sha256-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+wrote 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Open dev
+sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-essiv-sha256-sha1.img qiotest-145-aes-256-cbc-essiv-sha256-sha1
+# Set dev owner
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
+# Read test pattern 0x91
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
+read 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Read test pattern 0x5e
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
+read 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Close dev
+sudo cryptsetup -q -v luksClose qiotest-145-aes-256-cbc-essiv-sha256-sha1
+# Delete image
+unlink TEST_DIR/luks-aes-256-cbc-essiv-sha256-sha1.img
+
+# ================= qemu-img aes-256-cbc-essiv-sha256-sha1 =================
+# Create image
+qemu-img create -f luks --object secret,id=sec0,data=MTIzNDU2,format=base64 -o key-secret=sec0,cipher-alg=aes-256,cipher-mode=cbc,ivgen-alg=essiv,hash-alg=sha1,ivgen-hash-alg=sha256 TEST_DIR/luks-aes-256-cbc-essiv-sha256-sha1.img 4194304M
+Formatting 'TEST_DIR/luks-aes-256-cbc-essiv-sha256-sha1.img', fmt=luks size=4398046511104 key-secret=sec0 cipher-alg=aes-256 cipher-mode=cbc ivgen-alg=essiv ivgen-hash-alg=sha256 hash-alg=sha1
+
+# Open dev
+sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-essiv-sha256-sha1.img qiotest-145-aes-256-cbc-essiv-sha256-sha1
+# Set dev owner
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
+# Write test pattern 0xa7
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
+wrote 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x13
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
+wrote 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Close dev
+sudo cryptsetup -q -v luksClose qiotest-145-aes-256-cbc-essiv-sha256-sha1
+# Read test pattern 0xa7
+qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-essiv-sha256-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+read 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Read test pattern 0x13
+qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-essiv-sha256-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+read 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x91
+qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-essiv-sha256-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+wrote 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x5e
+qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-essiv-sha256-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+wrote 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Open dev
+sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-essiv-sha256-sha1.img qiotest-145-aes-256-cbc-essiv-sha256-sha1
+# Set dev owner
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
+# Read test pattern 0x91
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
+read 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Read test pattern 0x5e
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
+read 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Close dev
+sudo cryptsetup -q -v luksClose qiotest-145-aes-256-cbc-essiv-sha256-sha1
+# Delete image
+unlink TEST_DIR/luks-aes-256-cbc-essiv-sha256-sha1.img
+
+# ================= dm-crypt aes-256-xts-essiv-sha256-sha1 =================
+# Create image
+truncate TEST_DIR/luks-aes-256-xts-essiv-sha256-sha1.img --size 4194304MB
+# Format image
+sudo cryptsetup -q -v luksFormat --cipher aes-xts-essiv:sha256 --key-size 512 --hash sha1 --key-slot 0 --key-file - TEST_DIR/luks-aes-256-xts-essiv-sha256-sha1.img
+# Open dev
+sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-essiv-sha256-sha1.img qiotest-145-aes-256-xts-essiv-sha256-sha1
+# Set dev owner
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
+# Write test pattern 0xa7
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
+wrote 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x13
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
+wrote 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Close dev
+sudo cryptsetup -q -v luksClose qiotest-145-aes-256-xts-essiv-sha256-sha1
+# Read test pattern 0xa7
+qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-essiv-sha256-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+read 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Read test pattern 0x13
+qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-essiv-sha256-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+read 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x91
+qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-essiv-sha256-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+wrote 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x5e
+qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-essiv-sha256-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+wrote 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Open dev
+sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-essiv-sha256-sha1.img qiotest-145-aes-256-xts-essiv-sha256-sha1
+# Set dev owner
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
+# Read test pattern 0x91
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
+read 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Read test pattern 0x5e
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
+read 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Close dev
+sudo cryptsetup -q -v luksClose qiotest-145-aes-256-xts-essiv-sha256-sha1
+# Delete image
+unlink TEST_DIR/luks-aes-256-xts-essiv-sha256-sha1.img
+
+# ================= qemu-img aes-256-xts-essiv-sha256-sha1 =================
+# Create image
+qemu-img create -f luks --object secret,id=sec0,data=MTIzNDU2,format=base64 -o key-secret=sec0,cipher-alg=aes-256,cipher-mode=xts,ivgen-alg=essiv,hash-alg=sha1,ivgen-hash-alg=sha256 TEST_DIR/luks-aes-256-xts-essiv-sha256-sha1.img 4194304M
+Formatting 'TEST_DIR/luks-aes-256-xts-essiv-sha256-sha1.img', fmt=luks size=4398046511104 key-secret=sec0 cipher-alg=aes-256 cipher-mode=xts ivgen-alg=essiv ivgen-hash-alg=sha256 hash-alg=sha1
+
+# Open dev
+sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-essiv-sha256-sha1.img qiotest-145-aes-256-xts-essiv-sha256-sha1
+# Set dev owner
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
+# Write test pattern 0xa7
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
+wrote 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x13
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
+wrote 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Close dev
+sudo cryptsetup -q -v luksClose qiotest-145-aes-256-xts-essiv-sha256-sha1
+# Read test pattern 0xa7
+qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-essiv-sha256-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+read 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Read test pattern 0x13
+qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-essiv-sha256-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+read 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x91
+qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-essiv-sha256-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+wrote 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x5e
+qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-essiv-sha256-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+wrote 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Open dev
+sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-essiv-sha256-sha1.img qiotest-145-aes-256-xts-essiv-sha256-sha1
+# Set dev owner
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
+# Read test pattern 0x91
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
+read 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Read test pattern 0x5e
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
+read 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Close dev
+sudo cryptsetup -q -v luksClose qiotest-145-aes-256-xts-essiv-sha256-sha1
+# Delete image
+unlink TEST_DIR/luks-aes-256-xts-essiv-sha256-sha1.img
+
+# ================= dm-crypt aes-128-xts-plain64-sha256-sha1 =================
+# Create image
+truncate TEST_DIR/luks-aes-128-xts-plain64-sha256-sha1.img --size 4194304MB
+# Format image
+sudo cryptsetup -q -v luksFormat --cipher aes-xts-plain64 --key-size 256 --hash sha1 --key-slot 0 --key-file - TEST_DIR/luks-aes-128-xts-plain64-sha256-sha1.img
+# Open dev
+sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-128-xts-plain64-sha256-sha1.img qiotest-145-aes-128-xts-plain64-sha256-sha1
+# Set dev owner
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
+# Write test pattern 0xa7
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
+wrote 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x13
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
+wrote 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Close dev
+sudo cryptsetup -q -v luksClose qiotest-145-aes-128-xts-plain64-sha256-sha1
+# Read test pattern 0xa7
+qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-128-xts-plain64-sha256-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+read 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Read test pattern 0x13
+qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-128-xts-plain64-sha256-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+read 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x91
+qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-128-xts-plain64-sha256-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+wrote 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x5e
+qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-128-xts-plain64-sha256-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+wrote 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Open dev
+sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-128-xts-plain64-sha256-sha1.img qiotest-145-aes-128-xts-plain64-sha256-sha1
+# Set dev owner
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
+# Read test pattern 0x91
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
+read 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Read test pattern 0x5e
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
+read 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Close dev
+sudo cryptsetup -q -v luksClose qiotest-145-aes-128-xts-plain64-sha256-sha1
+# Delete image
+unlink TEST_DIR/luks-aes-128-xts-plain64-sha256-sha1.img
+
+# ================= qemu-img aes-128-xts-plain64-sha256-sha1 =================
+# Create image
+qemu-img create -f luks --object secret,id=sec0,data=MTIzNDU2,format=base64 -o key-secret=sec0,cipher-alg=aes-128,cipher-mode=xts,ivgen-alg=plain64,hash-alg=sha1 TEST_DIR/luks-aes-128-xts-plain64-sha256-sha1.img 4194304M
+Formatting 'TEST_DIR/luks-aes-128-xts-plain64-sha256-sha1.img', fmt=luks size=4398046511104 key-secret=sec0 cipher-alg=aes-128 cipher-mode=xts ivgen-alg=plain64 hash-alg=sha1
+
+# Open dev
+sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-128-xts-plain64-sha256-sha1.img qiotest-145-aes-128-xts-plain64-sha256-sha1
+# Set dev owner
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
+# Write test pattern 0xa7
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
+wrote 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x13
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
+wrote 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Close dev
+sudo cryptsetup -q -v luksClose qiotest-145-aes-128-xts-plain64-sha256-sha1
+# Read test pattern 0xa7
+qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-128-xts-plain64-sha256-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+read 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Read test pattern 0x13
+qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-128-xts-plain64-sha256-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+read 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x91
+qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-128-xts-plain64-sha256-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+wrote 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x5e
+qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-128-xts-plain64-sha256-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+wrote 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Open dev
+sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-128-xts-plain64-sha256-sha1.img qiotest-145-aes-128-xts-plain64-sha256-sha1
+# Set dev owner
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
+# Read test pattern 0x91
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
+read 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Read test pattern 0x5e
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
+read 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Close dev
+sudo cryptsetup -q -v luksClose qiotest-145-aes-128-xts-plain64-sha256-sha1
+# Delete image
+unlink TEST_DIR/luks-aes-128-xts-plain64-sha256-sha1.img
+
+# ================= dm-crypt aes-192-xts-plain64-sha256-sha1 =================
+# Create image
+truncate TEST_DIR/luks-aes-192-xts-plain64-sha256-sha1.img --size 4194304MB
+# Format image
+sudo cryptsetup -q -v luksFormat --cipher aes-xts-plain64 --key-size 384 --hash sha1 --key-slot 0 --key-file - TEST_DIR/luks-aes-192-xts-plain64-sha256-sha1.img
+# Open dev
+sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-192-xts-plain64-sha256-sha1.img qiotest-145-aes-192-xts-plain64-sha256-sha1
+# Set dev owner
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
+# Write test pattern 0xa7
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
+wrote 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x13
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
+wrote 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Close dev
+sudo cryptsetup -q -v luksClose qiotest-145-aes-192-xts-plain64-sha256-sha1
+# Read test pattern 0xa7
+qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-192-xts-plain64-sha256-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+read 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Read test pattern 0x13
+qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-192-xts-plain64-sha256-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+read 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x91
+qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-192-xts-plain64-sha256-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+wrote 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x5e
+qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-192-xts-plain64-sha256-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+wrote 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Open dev
+sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-192-xts-plain64-sha256-sha1.img qiotest-145-aes-192-xts-plain64-sha256-sha1
+# Set dev owner
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
+# Read test pattern 0x91
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
+read 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Read test pattern 0x5e
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
+read 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Close dev
+sudo cryptsetup -q -v luksClose qiotest-145-aes-192-xts-plain64-sha256-sha1
+# Delete image
+unlink TEST_DIR/luks-aes-192-xts-plain64-sha256-sha1.img
+
+# ================= qemu-img aes-192-xts-plain64-sha256-sha1 =================
+# Create image
+qemu-img create -f luks --object secret,id=sec0,data=MTIzNDU2,format=base64 -o key-secret=sec0,cipher-alg=aes-192,cipher-mode=xts,ivgen-alg=plain64,hash-alg=sha1 TEST_DIR/luks-aes-192-xts-plain64-sha256-sha1.img 4194304M
+Formatting 'TEST_DIR/luks-aes-192-xts-plain64-sha256-sha1.img', fmt=luks size=4398046511104 key-secret=sec0 cipher-alg=aes-192 cipher-mode=xts ivgen-alg=plain64 hash-alg=sha1
+
+# Open dev
+sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-192-xts-plain64-sha256-sha1.img qiotest-145-aes-192-xts-plain64-sha256-sha1
+# Set dev owner
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
+# Write test pattern 0xa7
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
+wrote 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x13
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
+wrote 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Close dev
+sudo cryptsetup -q -v luksClose qiotest-145-aes-192-xts-plain64-sha256-sha1
+# Read test pattern 0xa7
+qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-192-xts-plain64-sha256-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+read 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Read test pattern 0x13
+qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-192-xts-plain64-sha256-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+read 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x91
+qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-192-xts-plain64-sha256-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+wrote 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x5e
+qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-192-xts-plain64-sha256-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+wrote 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Open dev
+sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-192-xts-plain64-sha256-sha1.img qiotest-145-aes-192-xts-plain64-sha256-sha1
+# Set dev owner
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
+# Read test pattern 0x91
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
+read 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Read test pattern 0x5e
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
+read 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Close dev
+sudo cryptsetup -q -v luksClose qiotest-145-aes-192-xts-plain64-sha256-sha1
+# Delete image
+unlink TEST_DIR/luks-aes-192-xts-plain64-sha256-sha1.img
+
+# ================= dm-crypt twofish-128-xts-plain64-sha1 =================
+# Create image
+truncate TEST_DIR/luks-twofish-128-xts-plain64-sha1.img --size 4194304MB
+# Format image
+sudo cryptsetup -q -v luksFormat --cipher twofish-xts-plain64 --key-size 256 --hash sha1 --key-slot 0 --key-file - TEST_DIR/luks-twofish-128-xts-plain64-sha1.img
+# Open dev
+sudo cryptsetup -q -v luksOpen TEST_DIR/luks-twofish-128-xts-plain64-sha1.img qiotest-145-twofish-128-xts-plain64-sha1
+# Set dev owner
+sudo chown UID:GID /dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
+# Write test pattern 0xa7
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
+wrote 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x13
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
+wrote 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Close dev
+sudo cryptsetup -q -v luksClose qiotest-145-twofish-128-xts-plain64-sha1
+# Read test pattern 0xa7
+qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-twofish-128-xts-plain64-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+read 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Read test pattern 0x13
+qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-twofish-128-xts-plain64-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+read 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x91
+qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-twofish-128-xts-plain64-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+wrote 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x5e
+qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-twofish-128-xts-plain64-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+wrote 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Open dev
+sudo cryptsetup -q -v luksOpen TEST_DIR/luks-twofish-128-xts-plain64-sha1.img qiotest-145-twofish-128-xts-plain64-sha1
+# Set dev owner
+sudo chown UID:GID /dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
+# Read test pattern 0x91
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
+read 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Read test pattern 0x5e
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
+read 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Close dev
+sudo cryptsetup -q -v luksClose qiotest-145-twofish-128-xts-plain64-sha1
+# Delete image
+unlink TEST_DIR/luks-twofish-128-xts-plain64-sha1.img
+
+# ================= qemu-img twofish-128-xts-plain64-sha1 =================
+# Create image
+qemu-img create -f luks --object secret,id=sec0,data=MTIzNDU2,format=base64 -o key-secret=sec0,cipher-alg=twofish-128,cipher-mode=xts,ivgen-alg=plain64,hash-alg=sha1 TEST_DIR/luks-twofish-128-xts-plain64-sha1.img 4194304M
+Formatting 'TEST_DIR/luks-twofish-128-xts-plain64-sha1.img', fmt=luks size=4398046511104 key-secret=sec0 cipher-alg=twofish-128 cipher-mode=xts ivgen-alg=plain64 hash-alg=sha1
+
+# Open dev
+sudo cryptsetup -q -v luksOpen TEST_DIR/luks-twofish-128-xts-plain64-sha1.img qiotest-145-twofish-128-xts-plain64-sha1
+# Set dev owner
+sudo chown UID:GID /dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
+# Write test pattern 0xa7
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
+wrote 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x13
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
+wrote 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Close dev
+sudo cryptsetup -q -v luksClose qiotest-145-twofish-128-xts-plain64-sha1
+# Read test pattern 0xa7
+qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-twofish-128-xts-plain64-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+read 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Read test pattern 0x13
+qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-twofish-128-xts-plain64-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+read 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x91
+qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-twofish-128-xts-plain64-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+wrote 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x5e
+qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-twofish-128-xts-plain64-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+wrote 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Open dev
+sudo cryptsetup -q -v luksOpen TEST_DIR/luks-twofish-128-xts-plain64-sha1.img qiotest-145-twofish-128-xts-plain64-sha1
+# Set dev owner
+sudo chown UID:GID /dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
+# Read test pattern 0x91
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
+read 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Read test pattern 0x5e
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
+read 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Close dev
+sudo cryptsetup -q -v luksClose qiotest-145-twofish-128-xts-plain64-sha1
+# Delete image
+unlink TEST_DIR/luks-twofish-128-xts-plain64-sha1.img
+
+Skipping twofish-192-xts-plain64-sha1 in blacklist
+# ================= dm-crypt serpent-128-xts-plain64-sha1 =================
+# Create image
+truncate TEST_DIR/luks-serpent-128-xts-plain64-sha1.img --size 4194304MB
+# Format image
+sudo cryptsetup -q -v luksFormat --cipher serpent-xts-plain64 --key-size 256 --hash sha1 --key-slot 0 --key-file - TEST_DIR/luks-serpent-128-xts-plain64-sha1.img
+# Open dev
+sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-128-xts-plain64-sha1.img qiotest-145-serpent-128-xts-plain64-sha1
+# Set dev owner
+sudo chown UID:GID /dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
+# Write test pattern 0xa7
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
+wrote 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x13
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
+wrote 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Close dev
+sudo cryptsetup -q -v luksClose qiotest-145-serpent-128-xts-plain64-sha1
+# Read test pattern 0xa7
+qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-128-xts-plain64-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+read 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Read test pattern 0x13
+qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-128-xts-plain64-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+read 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x91
+qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-128-xts-plain64-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+wrote 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x5e
+qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-128-xts-plain64-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+wrote 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Open dev
+sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-128-xts-plain64-sha1.img qiotest-145-serpent-128-xts-plain64-sha1
+# Set dev owner
+sudo chown UID:GID /dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
+# Read test pattern 0x91
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
+read 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Read test pattern 0x5e
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
+read 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Close dev
+sudo cryptsetup -q -v luksClose qiotest-145-serpent-128-xts-plain64-sha1
+# Delete image
+unlink TEST_DIR/luks-serpent-128-xts-plain64-sha1.img
+
+# ================= qemu-img serpent-128-xts-plain64-sha1 =================
+# Create image
+qemu-img create -f luks --object secret,id=sec0,data=MTIzNDU2,format=base64 -o key-secret=sec0,cipher-alg=serpent-128,cipher-mode=xts,ivgen-alg=plain64,hash-alg=sha1 TEST_DIR/luks-serpent-128-xts-plain64-sha1.img 4194304M
+Formatting 'TEST_DIR/luks-serpent-128-xts-plain64-sha1.img', fmt=luks size=4398046511104 key-secret=sec0 cipher-alg=serpent-128 cipher-mode=xts ivgen-alg=plain64 hash-alg=sha1
+
+# Open dev
+sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-128-xts-plain64-sha1.img qiotest-145-serpent-128-xts-plain64-sha1
+# Set dev owner
+sudo chown UID:GID /dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
+# Write test pattern 0xa7
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
+wrote 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x13
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
+wrote 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Close dev
+sudo cryptsetup -q -v luksClose qiotest-145-serpent-128-xts-plain64-sha1
+# Read test pattern 0xa7
+qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-128-xts-plain64-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+read 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Read test pattern 0x13
+qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-128-xts-plain64-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+read 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x91
+qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-128-xts-plain64-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+wrote 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x5e
+qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-128-xts-plain64-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+wrote 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Open dev
+sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-128-xts-plain64-sha1.img qiotest-145-serpent-128-xts-plain64-sha1
+# Set dev owner
+sudo chown UID:GID /dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
+# Read test pattern 0x91
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
+read 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Read test pattern 0x5e
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
+read 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Close dev
+sudo cryptsetup -q -v luksClose qiotest-145-serpent-128-xts-plain64-sha1
+# Delete image
+unlink TEST_DIR/luks-serpent-128-xts-plain64-sha1.img
+
+# ================= dm-crypt serpent-192-xts-plain64-sha1 =================
+# Create image
+truncate TEST_DIR/luks-serpent-192-xts-plain64-sha1.img --size 4194304MB
+# Format image
+sudo cryptsetup -q -v luksFormat --cipher serpent-xts-plain64 --key-size 384 --hash sha1 --key-slot 0 --key-file - TEST_DIR/luks-serpent-192-xts-plain64-sha1.img
+# Open dev
+sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-192-xts-plain64-sha1.img qiotest-145-serpent-192-xts-plain64-sha1
+# Set dev owner
+sudo chown UID:GID /dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
+# Write test pattern 0xa7
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
+wrote 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x13
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
+wrote 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Close dev
+sudo cryptsetup -q -v luksClose qiotest-145-serpent-192-xts-plain64-sha1
+# Read test pattern 0xa7
+qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-192-xts-plain64-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+read 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Read test pattern 0x13
+qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-192-xts-plain64-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+read 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x91
+qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-192-xts-plain64-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+wrote 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x5e
+qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-192-xts-plain64-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+wrote 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Open dev
+sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-192-xts-plain64-sha1.img qiotest-145-serpent-192-xts-plain64-sha1
+# Set dev owner
+sudo chown UID:GID /dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
+# Read test pattern 0x91
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
+read 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Read test pattern 0x5e
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
+read 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Close dev
+sudo cryptsetup -q -v luksClose qiotest-145-serpent-192-xts-plain64-sha1
+# Delete image
+unlink TEST_DIR/luks-serpent-192-xts-plain64-sha1.img
+
+# ================= qemu-img serpent-192-xts-plain64-sha1 =================
+# Create image
+qemu-img create -f luks --object secret,id=sec0,data=MTIzNDU2,format=base64 -o key-secret=sec0,cipher-alg=serpent-192,cipher-mode=xts,ivgen-alg=plain64,hash-alg=sha1 TEST_DIR/luks-serpent-192-xts-plain64-sha1.img 4194304M
+Formatting 'TEST_DIR/luks-serpent-192-xts-plain64-sha1.img', fmt=luks size=4398046511104 key-secret=sec0 cipher-alg=serpent-192 cipher-mode=xts ivgen-alg=plain64 hash-alg=sha1
+
+# Open dev
+sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-192-xts-plain64-sha1.img qiotest-145-serpent-192-xts-plain64-sha1
+# Set dev owner
+sudo chown UID:GID /dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
+# Write test pattern 0xa7
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
+wrote 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x13
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
+wrote 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Close dev
+sudo cryptsetup -q -v luksClose qiotest-145-serpent-192-xts-plain64-sha1
+# Read test pattern 0xa7
+qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-192-xts-plain64-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+read 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Read test pattern 0x13
+qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-192-xts-plain64-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+read 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x91
+qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-192-xts-plain64-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+wrote 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x5e
+qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-192-xts-plain64-sha1.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+wrote 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Open dev
+sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-192-xts-plain64-sha1.img qiotest-145-serpent-192-xts-plain64-sha1
+# Set dev owner
+sudo chown UID:GID /dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
+# Read test pattern 0x91
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
+read 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Read test pattern 0x5e
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
+read 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Close dev
+sudo cryptsetup -q -v luksClose qiotest-145-serpent-192-xts-plain64-sha1
+# Delete image
+unlink TEST_DIR/luks-serpent-192-xts-plain64-sha1.img
+
+Skipping cast6-128-xts-plain64-sha1 in blacklist
+Skipping cast6-192-xts-plain64-sha1 in blacklist
+# ================= dm-crypt aes-256-xts-plain64-sha256 =================
+# Create image
+truncate TEST_DIR/luks-aes-256-xts-plain64-sha256.img --size 4194304MB
+# Format image
+sudo cryptsetup -q -v luksFormat --cipher aes-xts-plain64 --key-size 512 --hash sha256 --key-slot 0 --key-file - TEST_DIR/luks-aes-256-xts-plain64-sha256.img
+# Open dev
+sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha256.img qiotest-145-aes-256-xts-plain64-sha256
+# Set dev owner
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
+# Write test pattern 0xa7
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
+wrote 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x13
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
+wrote 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Close dev
+sudo cryptsetup -q -v luksClose qiotest-145-aes-256-xts-plain64-sha256
+# Read test pattern 0xa7
+qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain64-sha256.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+read 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Read test pattern 0x13
+qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain64-sha256.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+read 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x91
+qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain64-sha256.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+wrote 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x5e
+qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain64-sha256.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+wrote 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Open dev
+sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha256.img qiotest-145-aes-256-xts-plain64-sha256
+# Set dev owner
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
+# Read test pattern 0x91
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
+read 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Read test pattern 0x5e
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
+read 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Close dev
+sudo cryptsetup -q -v luksClose qiotest-145-aes-256-xts-plain64-sha256
+# Delete image
+unlink TEST_DIR/luks-aes-256-xts-plain64-sha256.img
+
+# ================= qemu-img aes-256-xts-plain64-sha256 =================
+# Create image
+qemu-img create -f luks --object secret,id=sec0,data=MTIzNDU2,format=base64 -o key-secret=sec0,cipher-alg=aes-256,cipher-mode=xts,ivgen-alg=plain64,hash-alg=sha256 TEST_DIR/luks-aes-256-xts-plain64-sha256.img 4194304M
+Formatting 'TEST_DIR/luks-aes-256-xts-plain64-sha256.img', fmt=luks size=4398046511104 key-secret=sec0 cipher-alg=aes-256 cipher-mode=xts ivgen-alg=plain64 hash-alg=sha256
+
+# Open dev
+sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha256.img qiotest-145-aes-256-xts-plain64-sha256
+# Set dev owner
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
+# Write test pattern 0xa7
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
+wrote 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x13
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
+wrote 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Close dev
+sudo cryptsetup -q -v luksClose qiotest-145-aes-256-xts-plain64-sha256
+# Read test pattern 0xa7
+qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain64-sha256.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+read 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Read test pattern 0x13
+qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain64-sha256.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+read 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x91
+qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain64-sha256.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+wrote 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x5e
+qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain64-sha256.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+wrote 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Open dev
+sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha256.img qiotest-145-aes-256-xts-plain64-sha256
+# Set dev owner
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
+# Read test pattern 0x91
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
+read 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Read test pattern 0x5e
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
+read 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Close dev
+sudo cryptsetup -q -v luksClose qiotest-145-aes-256-xts-plain64-sha256
+# Delete image
+unlink TEST_DIR/luks-aes-256-xts-plain64-sha256.img
+
+Skipping aes-256-xts-plain64-sha512 in blacklist
+Skipping aes-256-xts-plain64-ripemd160 in blacklist
+# ================= dm-crypt aes-256-xts-plain-sha1-pwslot3 =================
+# Create image
+truncate TEST_DIR/luks-aes-256-xts-plain-sha1-pwslot3.img --size 4194304MB
+# Format image
+sudo cryptsetup -q -v luksFormat --cipher aes-xts-plain --key-size 512 --hash sha1 --key-slot 3 --key-file - TEST_DIR/luks-aes-256-xts-plain-sha1-pwslot3.img
+# Open dev
+sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain-sha1-pwslot3.img qiotest-145-aes-256-xts-plain-sha1-pwslot3
+# Set dev owner
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwslot3
+# Write test pattern 0xa7
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwslot3
+wrote 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x13
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwslot3
+wrote 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Close dev
+sudo cryptsetup -q -v luksClose qiotest-145-aes-256-xts-plain-sha1-pwslot3
+# Read test pattern 0xa7
+qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=c2xvdDM=,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain-sha1-pwslot3.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+read 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Read test pattern 0x13
+qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=c2xvdDM=,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain-sha1-pwslot3.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+read 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x91
+qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=c2xvdDM=,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain-sha1-pwslot3.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+wrote 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x5e
+qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=c2xvdDM=,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain-sha1-pwslot3.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+wrote 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Open dev
+sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain-sha1-pwslot3.img qiotest-145-aes-256-xts-plain-sha1-pwslot3
+# Set dev owner
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwslot3
+# Read test pattern 0x91
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwslot3
+read 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Read test pattern 0x5e
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwslot3
+read 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Close dev
+sudo cryptsetup -q -v luksClose qiotest-145-aes-256-xts-plain-sha1-pwslot3
+# Delete image
+unlink TEST_DIR/luks-aes-256-xts-plain-sha1-pwslot3.img
+
+# ================= dm-crypt aes-256-xts-plain-sha1-pwallslots =================
+# Create image
+truncate TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img --size 4194304MB
+# Format image
+sudo cryptsetup -q -v luksFormat --cipher aes-xts-plain --key-size 512 --hash sha1 --key-slot 0 --key-file - TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img
+# Add password slot 1
+sudo cryptsetup -q -v luksAddKey TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img --key-slot 1 --key-file - TEST_DIR/passwd.txt
+# Add password slot 2
+sudo cryptsetup -q -v luksAddKey TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img --key-slot 2 --key-file - TEST_DIR/passwd.txt
+# Add password slot 3
+sudo cryptsetup -q -v luksAddKey TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img --key-slot 3 --key-file - TEST_DIR/passwd.txt
+# Add password slot 4
+sudo cryptsetup -q -v luksAddKey TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img --key-slot 4 --key-file - TEST_DIR/passwd.txt
+# Add password slot 5
+sudo cryptsetup -q -v luksAddKey TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img --key-slot 5 --key-file - TEST_DIR/passwd.txt
+# Add password slot 6
+sudo cryptsetup -q -v luksAddKey TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img --key-slot 6 --key-file - TEST_DIR/passwd.txt
+# Add password slot 7
+sudo cryptsetup -q -v luksAddKey TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img --key-slot 7 --key-file - TEST_DIR/passwd.txt
+# Open dev
+sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img qiotest-145-aes-256-xts-plain-sha1-pwallslots
+# Set dev owner
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
+# Write test pattern 0xa7
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
+wrote 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x13
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
+wrote 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Close dev
+sudo cryptsetup -q -v luksClose qiotest-145-aes-256-xts-plain-sha1-pwallslots
+# Read test pattern 0xa7
+qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=c2xvdDE=,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+read 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Read test pattern 0x13
+qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=c2xvdDE=,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+read 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x91
+qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=c2xvdDE=,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+wrote 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x5e
+qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=c2xvdDE=,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+wrote 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Open dev
+sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img qiotest-145-aes-256-xts-plain-sha1-pwallslots
+# Set dev owner
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
+# Read test pattern 0x91
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
+read 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Read test pattern 0x5e
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
+read 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Close dev
+sudo cryptsetup -q -v luksClose qiotest-145-aes-256-xts-plain-sha1-pwallslots
+# Delete image
+unlink TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img
+
+# ================= qemu-img aes-256-xts-plain-sha1-pwallslots =================
+# Create image
+qemu-img create -f luks --object secret,id=sec0,data=c2xvdDE=,format=base64 -o key-secret=sec0,cipher-alg=aes-256,cipher-mode=xts,ivgen-alg=plain,hash-alg=sha1 TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img 4194304M
+Formatting 'TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img', fmt=luks size=4398046511104 key-secret=sec0 cipher-alg=aes-256 cipher-mode=xts ivgen-alg=plain hash-alg=sha1
+
+# Open dev
+sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img qiotest-145-aes-256-xts-plain-sha1-pwallslots
+# Set dev owner
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
+# Write test pattern 0xa7
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
+wrote 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x13
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
+wrote 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Close dev
+sudo cryptsetup -q -v luksClose qiotest-145-aes-256-xts-plain-sha1-pwallslots
+# Read test pattern 0xa7
+qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=c2xvdDE=,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+read 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Read test pattern 0x13
+qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=c2xvdDE=,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+read 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x91
+qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=c2xvdDE=,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+wrote 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Write test pattern 0x5e
+qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=c2xvdDE=,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img
+Encrypted images are deprecated
+Support for them will be removed in a future release.
+You can use 'qemu-img convert' to convert your image to an unencrypted one.
+wrote 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Open dev
+sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img qiotest-145-aes-256-xts-plain-sha1-pwallslots
+# Set dev owner
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
+# Read test pattern 0x91
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
+read 10485760/10485760 bytes at offset 104857600
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Read test pattern 0x5e
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
+read 10485760/10485760 bytes at offset 3298534883328
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+# Close dev
+sudo cryptsetup -q -v luksClose qiotest-145-aes-256-xts-plain-sha1-pwallslots
+# Delete image
+unlink TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img
+
@@ -50,6 +50,7 @@ export IMGPROTO=file
export IMGOPTS=""
export CACHEMODE="writeback"
export QEMU_IO_OPTIONS=""
+export QEMU_IO_OPTIONS_NO_FMT=""
export CACHEMODE_IS_DEFAULT=true
export QEMU_OPTIONS="-nodefaults"
export VALGRIND_QEMU=
@@ -155,6 +156,7 @@ check options
-ssh test ssh
-nfs test nfs
-archipelago test archipelago
+ -luks test luks
-xdiff graphical mode diff
-nocache use O_DIRECT on backing file
-misalign misalign memory allocations
@@ -206,6 +208,11 @@ testlist options
xpand=false
;;
+ -luks)
+ IMGFMT=luks
+ xpand=false
+ ;;
+
-qed)
IMGFMT=qed
xpand=false
@@ -148,3 +148,4 @@
143 auto quick
144 rw auto quick
145 auto quick
+146 rw auto sudo
Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. At this time, the "luks" driver is registered. New LUKS compatible volume can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not neccessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. A new I/O test is added which is used to validate the interoperability of the QEMU implementation of LUKS, with the dm-crypt/cryptsetup implementation. Due to the need to run cryptsetup as root, this test requires that the user have password-less sudo configured. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> --- block/Makefile.objs | 2 + block/crypto.c | 579 ++++++++++++ qapi/block-core.json | 22 +- tests/qemu-iotests/146 | 521 ++++++++++ tests/qemu-iotests/146.out | 2252 ++++++++++++++++++++++++++++++++++++++++++++ tests/qemu-iotests/common | 7 + tests/qemu-iotests/group | 1 + 7 files changed, 3382 insertions(+), 2 deletions(-) create mode 100644 block/crypto.c create mode 100755 tests/qemu-iotests/146 create mode 100644 tests/qemu-iotests/146.out