hw/usb: whitespace fix in tusb6010.c

Message ID	1456985964-31875-1-git-send-email-zxq_yx_007@163.com (mailing list archive)
State	New, archived
Headers	show Return-Path: <qemu-devel-bounces+patchwork-qemu-devel=patchwork.kernel.org@nongnu.org> From: xiaoqiang zhao <zxq_yx_007@163.com> To: qemu-devel@nongnu.org Date: Thu, 3 Mar 2016 14:19:24 +0800 Message-Id: <1456985964-31875-1-git-send-email-zxq_yx_007@163.com> Cc: peter.maydell@linaro.org, kraxel@redhat.com Subject: [Qemu-devel] [PATCH] hw/usb: whitespace fix in tusb6010.c Precedence: list Errors-To: qemu-devel-bounces+patchwork-qemu-devel=patchwork.kernel.org@nongnu.org Sender: qemu-devel-bounces+patchwork-qemu-devel=patchwork.kernel.org@nongnu.org

diff --git a/hw/usb/tusb6010.c b/hw/usb/tusb6010.c index 9f6af90..4daa3a5 100644 --- a/hw/usb/tusb6010.c +++ b/hw/usb/tusb6010.c @@ -68,178 +68,178 @@ typedef struct TUSBState { uint32_t otg_timer_val; } TUSBState; -#define TUSB_DEVCLOCK 60000000 /* 60 MHz */ +#define TUSB_DEVCLOCK 60000000 /* 60 MHz */ -#define TUSB_VLYNQ_CTRL 0x004 +#define TUSB_VLYNQ_CTRL 0x004 /* Mentor Graphics OTG core registers. */ -#define TUSB_BASE_OFFSET 0x400 +#define TUSB_BASE_OFFSET 0x400 /* FIFO registers, 32-bit. */ -#define TUSB_FIFO_BASE 0x600 +#define TUSB_FIFO_BASE 0x600 /* Device System & Control registers, 32-bit. */ -#define TUSB_SYS_REG_BASE 0x800 +#define TUSB_SYS_REG_BASE 0x800 -#define TUSB_DEV_CONF (TUSB_SYS_REG_BASE + 0x000) -#define TUSB_DEV_CONF_USB_HOST_MODE (1 << 16) -#define TUSB_DEV_CONF_PROD_TEST_MODE (1 << 15) -#define TUSB_DEV_CONF_SOFT_ID (1 << 1) -#define TUSB_DEV_CONF_ID_SEL (1 << 0) +#define TUSB_DEV_CONF (TUSB_SYS_REG_BASE + 0x000) +#define TUSB_DEV_CONF_USB_HOST_MODE (1 << 16) +#define TUSB_DEV_CONF_PROD_TEST_MODE (1 << 15) +#define TUSB_DEV_CONF_SOFT_ID (1 << 1) +#define TUSB_DEV_CONF_ID_SEL (1 << 0) -#define TUSB_PHY_OTG_CTRL_ENABLE (TUSB_SYS_REG_BASE + 0x004) -#define TUSB_PHY_OTG_CTRL (TUSB_SYS_REG_BASE + 0x008) -#define TUSB_PHY_OTG_CTRL_WRPROTECT (0xa5 << 24) -#define TUSB_PHY_OTG_CTRL_O_ID_PULLUP (1 << 23) -#define TUSB_PHY_OTG_CTRL_O_VBUS_DET_EN (1 << 19) -#define TUSB_PHY_OTG_CTRL_O_SESS_END_EN (1 << 18) -#define TUSB_PHY_OTG_CTRL_TESTM2 (1 << 17) -#define TUSB_PHY_OTG_CTRL_TESTM1 (1 << 16) -#define TUSB_PHY_OTG_CTRL_TESTM0 (1 << 15) -#define TUSB_PHY_OTG_CTRL_TX_DATA2 (1 << 14) -#define TUSB_PHY_OTG_CTRL_TX_GZ2 (1 << 13) -#define TUSB_PHY_OTG_CTRL_TX_ENABLE2 (1 << 12) -#define TUSB_PHY_OTG_CTRL_DM_PULLDOWN (1 << 11) -#define TUSB_PHY_OTG_CTRL_DP_PULLDOWN (1 << 10) -#define TUSB_PHY_OTG_CTRL_OSC_EN (1 << 9) -#define TUSB_PHY_OTG_CTRL_PHYREF_CLK(v) (((v) & 3) << 7) -#define TUSB_PHY_OTG_CTRL_PD (1 << 6) -#define TUSB_PHY_OTG_CTRL_PLL_ON (1 << 5) -#define TUSB_PHY_OTG_CTRL_EXT_RPU (1 << 4) -#define TUSB_PHY_OTG_CTRL_PWR_GOOD (1 << 3) -#define TUSB_PHY_OTG_CTRL_RESET (1 << 2) -#define TUSB_PHY_OTG_CTRL_SUSPENDM (1 << 1) -#define TUSB_PHY_OTG_CTRL_CLK_MODE (1 << 0) +#define TUSB_PHY_OTG_CTRL_ENABLE (TUSB_SYS_REG_BASE + 0x004) +#define TUSB_PHY_OTG_CTRL (TUSB_SYS_REG_BASE + 0x008) +#define TUSB_PHY_OTG_CTRL_WRPROTECT (0xa5 << 24) +#define TUSB_PHY_OTG_CTRL_O_ID_PULLUP (1 << 23) +#define TUSB_PHY_OTG_CTRL_O_VBUS_DET_EN (1 << 19) +#define TUSB_PHY_OTG_CTRL_O_SESS_END_EN (1 << 18) +#define TUSB_PHY_OTG_CTRL_TESTM2 (1 << 17) +#define TUSB_PHY_OTG_CTRL_TESTM1 (1 << 16) +#define TUSB_PHY_OTG_CTRL_TESTM0 (1 << 15) +#define TUSB_PHY_OTG_CTRL_TX_DATA2 (1 << 14) +#define TUSB_PHY_OTG_CTRL_TX_GZ2 (1 << 13) +#define TUSB_PHY_OTG_CTRL_TX_ENABLE2 (1 << 12) +#define TUSB_PHY_OTG_CTRL_DM_PULLDOWN (1 << 11) +#define TUSB_PHY_OTG_CTRL_DP_PULLDOWN (1 << 10) +#define TUSB_PHY_OTG_CTRL_OSC_EN (1 << 9) +#define TUSB_PHY_OTG_CTRL_PHYREF_CLK(v) (((v) & 3) << 7) +#define TUSB_PHY_OTG_CTRL_PD (1 << 6) +#define TUSB_PHY_OTG_CTRL_PLL_ON (1 << 5) +#define TUSB_PHY_OTG_CTRL_EXT_RPU (1 << 4) +#define TUSB_PHY_OTG_CTRL_PWR_GOOD (1 << 3) +#define TUSB_PHY_OTG_CTRL_RESET (1 << 2) +#define TUSB_PHY_OTG_CTRL_SUSPENDM (1 << 1) +#define TUSB_PHY_OTG_CTRL_CLK_MODE (1 << 0) /* OTG status register */ -#define TUSB_DEV_OTG_STAT (TUSB_SYS_REG_BASE + 0x00c) -#define TUSB_DEV_OTG_STAT_PWR_CLK_GOOD (1 << 8) -#define TUSB_DEV_OTG_STAT_SESS_END (1 << 7) -#define TUSB_DEV_OTG_STAT_SESS_VALID (1 << 6) -#define TUSB_DEV_OTG_STAT_VBUS_VALID (1 << 5) -#define TUSB_DEV_OTG_STAT_VBUS_SENSE (1 << 4) -#define TUSB_DEV_OTG_STAT_ID_STATUS (1 << 3) -#define TUSB_DEV_OTG_STAT_HOST_DISCON (1 << 2) -#define TUSB_DEV_OTG_STAT_LINE_STATE (3 << 0) -#define TUSB_DEV_OTG_STAT_DP_ENABLE (1 << 1) -#define TUSB_DEV_OTG_STAT_DM_ENABLE (1 << 0) +#define TUSB_DEV_OTG_STAT (TUSB_SYS_REG_BASE + 0x00c) +#define TUSB_DEV_OTG_STAT_PWR_CLK_GOOD (1 << 8) +#define TUSB_DEV_OTG_STAT_SESS_END (1 << 7) +#define TUSB_DEV_OTG_STAT_SESS_VALID (1 << 6) +#define TUSB_DEV_OTG_STAT_VBUS_VALID (1 << 5) +#define TUSB_DEV_OTG_STAT_VBUS_SENSE (1 << 4) +#define TUSB_DEV_OTG_STAT_ID_STATUS (1 << 3) +#define TUSB_DEV_OTG_STAT_HOST_DISCON (1 << 2) +#define TUSB_DEV_OTG_STAT_LINE_STATE (3 << 0) +#define TUSB_DEV_OTG_STAT_DP_ENABLE (1 << 1) +#define TUSB_DEV_OTG_STAT_DM_ENABLE (1 << 0) -#define TUSB_DEV_OTG_TIMER (TUSB_SYS_REG_BASE + 0x010) -#define TUSB_DEV_OTG_TIMER_ENABLE (1 << 31) -#define TUSB_DEV_OTG_TIMER_VAL(v) ((v) & 0x07ffffff) -#define TUSB_PRCM_REV (TUSB_SYS_REG_BASE + 0x014) +#define TUSB_DEV_OTG_TIMER (TUSB_SYS_REG_BASE + 0x010) +#define TUSB_DEV_OTG_TIMER_ENABLE (1 << 31) +#define TUSB_DEV_OTG_TIMER_VAL(v) ((v) & 0x07ffffff) +#define TUSB_PRCM_REV (TUSB_SYS_REG_BASE + 0x014) /* PRCM configuration register */ -#define TUSB_PRCM_CONF (TUSB_SYS_REG_BASE + 0x018) -#define TUSB_PRCM_CONF_SFW_CPEN (1 << 24) -#define TUSB_PRCM_CONF_SYS_CLKSEL(v) (((v) & 3) << 16) +#define TUSB_PRCM_CONF (TUSB_SYS_REG_BASE + 0x018) +#define TUSB_PRCM_CONF_SFW_CPEN (1 << 24) +#define TUSB_PRCM_CONF_SYS_CLKSEL(v) (((v) & 3) << 16) /* PRCM management register */ -#define TUSB_PRCM_MNGMT (TUSB_SYS_REG_BASE + 0x01c) -#define TUSB_PRCM_MNGMT_SRP_FIX_TMR(v) (((v) & 0xf) << 25) -#define TUSB_PRCM_MNGMT_SRP_FIX_EN (1 << 24) -#define TUSB_PRCM_MNGMT_VBUS_VAL_TMR(v) (((v) & 0xf) << 20) -#define TUSB_PRCM_MNGMT_VBUS_VAL_FLT_EN (1 << 19) -#define TUSB_PRCM_MNGMT_DFT_CLK_DIS (1 << 18) -#define TUSB_PRCM_MNGMT_VLYNQ_CLK_DIS (1 << 17) -#define TUSB_PRCM_MNGMT_OTG_SESS_END_EN (1 << 10) -#define TUSB_PRCM_MNGMT_OTG_VBUS_DET_EN (1 << 9) -#define TUSB_PRCM_MNGMT_OTG_ID_PULLUP (1 << 8) -#define TUSB_PRCM_MNGMT_15_SW_EN (1 << 4) -#define TUSB_PRCM_MNGMT_33_SW_EN (1 << 3) -#define TUSB_PRCM_MNGMT_5V_CPEN (1 << 2) -#define TUSB_PRCM_MNGMT_PM_IDLE (1 << 1) -#define TUSB_PRCM_MNGMT_DEV_IDLE (1 << 0) +#define TUSB_PRCM_MNGMT (TUSB_SYS_REG_BASE + 0x01c) +#define TUSB_PRCM_MNGMT_SRP_FIX_TMR(v) (((v) & 0xf) << 25) +#define TUSB_PRCM_MNGMT_SRP_FIX_EN (1 << 24) +#define TUSB_PRCM_MNGMT_VBUS_VAL_TMR(v) (((v) & 0xf) << 20) +#define TUSB_PRCM_MNGMT_VBUS_VAL_FLT_EN (1 << 19) +#define TUSB_PRCM_MNGMT_DFT_CLK_DIS (1 << 18) +#define TUSB_PRCM_MNGMT_VLYNQ_CLK_DIS (1 << 17) +#define TUSB_PRCM_MNGMT_OTG_SESS_END_EN (1 << 10) +#define TUSB_PRCM_MNGMT_OTG_VBUS_DET_EN (1 << 9) +#define TUSB_PRCM_MNGMT_OTG_ID_PULLUP (1 << 8) +#define TUSB_PRCM_MNGMT_15_SW_EN (1 << 4) +#define TUSB_PRCM_MNGMT_33_SW_EN (1 << 3) +#define TUSB_PRCM_MNGMT_5V_CPEN (1 << 2) +#define TUSB_PRCM_MNGMT_PM_IDLE (1 << 1) +#define TUSB_PRCM_MNGMT_DEV_IDLE (1 << 0) /* Wake-up source clear and mask registers */ -#define TUSB_PRCM_WAKEUP_SOURCE (TUSB_SYS_REG_BASE + 0x020) -#define TUSB_PRCM_WAKEUP_CLEAR (TUSB_SYS_REG_BASE + 0x028) -#define TUSB_PRCM_WAKEUP_MASK (TUSB_SYS_REG_BASE + 0x02c) -#define TUSB_PRCM_WAKEUP_RESERVED_BITS (0xffffe << 13) -#define TUSB_PRCM_WGPIO_7 (1 << 12) -#define TUSB_PRCM_WGPIO_6 (1 << 11) -#define TUSB_PRCM_WGPIO_5 (1 << 10) -#define TUSB_PRCM_WGPIO_4 (1 << 9) -#define TUSB_PRCM_WGPIO_3 (1 << 8) -#define TUSB_PRCM_WGPIO_2 (1 << 7) -#define TUSB_PRCM_WGPIO_1 (1 << 6) -#define TUSB_PRCM_WGPIO_0 (1 << 5) -#define TUSB_PRCM_WHOSTDISCON (1 << 4) /* Host disconnect */ -#define TUSB_PRCM_WBUS (1 << 3) /* USB bus resume */ -#define TUSB_PRCM_WNORCS (1 << 2) /* NOR chip select */ -#define TUSB_PRCM_WVBUS (1 << 1) /* OTG PHY VBUS */ -#define TUSB_PRCM_WID (1 << 0) /* OTG PHY ID detect */ +#define TUSB_PRCM_WAKEUP_SOURCE (TUSB_SYS_REG_BASE + 0x020) +#define TUSB_PRCM_WAKEUP_CLEAR (TUSB_SYS_REG_BASE + 0x028) +#define TUSB_PRCM_WAKEUP_MASK (TUSB_SYS_REG_BASE + 0x02c) +#define TUSB_PRCM_WAKEUP_RESERVED_BITS (0xffffe << 13) +#define TUSB_PRCM_WGPIO_7 (1 << 12) +#define TUSB_PRCM_WGPIO_6 (1 << 11) +#define TUSB_PRCM_WGPIO_5 (1 << 10) +#define TUSB_PRCM_WGPIO_4 (1 << 9) +#define TUSB_PRCM_WGPIO_3 (1 << 8) +#define TUSB_PRCM_WGPIO_2 (1 << 7) +#define TUSB_PRCM_WGPIO_1 (1 << 6) +#define TUSB_PRCM_WGPIO_0 (1 << 5) +#define TUSB_PRCM_WHOSTDISCON (1 << 4) /* Host disconnect */ +#define TUSB_PRCM_WBUS (1 << 3) /* USB bus resume */ +#define TUSB_PRCM_WNORCS (1 << 2) /* NOR chip select */ +#define TUSB_PRCM_WVBUS (1 << 1) /* OTG PHY VBUS */ +#define TUSB_PRCM_WID (1 << 0) /* OTG PHY ID detect */ -#define TUSB_PULLUP_1_CTRL (TUSB_SYS_REG_BASE + 0x030) -#define TUSB_PULLUP_2_CTRL (TUSB_SYS_REG_BASE + 0x034) -#define TUSB_INT_CTRL_REV (TUSB_SYS_REG_BASE + 0x038) -#define TUSB_INT_CTRL_CONF (TUSB_SYS_REG_BASE + 0x03c) -#define TUSB_USBIP_INT_SRC (TUSB_SYS_REG_BASE + 0x040) -#define TUSB_USBIP_INT_SET (TUSB_SYS_REG_BASE + 0x044) -#define TUSB_USBIP_INT_CLEAR (TUSB_SYS_REG_BASE + 0x048) -#define TUSB_USBIP_INT_MASK (TUSB_SYS_REG_BASE + 0x04c) -#define TUSB_DMA_INT_SRC (TUSB_SYS_REG_BASE + 0x050) -#define TUSB_DMA_INT_SET (TUSB_SYS_REG_BASE + 0x054) -#define TUSB_DMA_INT_CLEAR (TUSB_SYS_REG_BASE + 0x058) -#define TUSB_DMA_INT_MASK (TUSB_SYS_REG_BASE + 0x05c) -#define TUSB_GPIO_INT_SRC (TUSB_SYS_REG_BASE + 0x060) -#define TUSB_GPIO_INT_SET (TUSB_SYS_REG_BASE + 0x064) -#define TUSB_GPIO_INT_CLEAR (TUSB_SYS_REG_BASE + 0x068) -#define TUSB_GPIO_INT_MASK (TUSB_SYS_REG_BASE + 0x06c) +#define TUSB_PULLUP_1_CTRL (TUSB_SYS_REG_BASE + 0x030) +#define TUSB_PULLUP_2_CTRL (TUSB_SYS_REG_BASE + 0x034) +#define TUSB_INT_CTRL_REV (TUSB_SYS_REG_BASE + 0x038) +#define TUSB_INT_CTRL_CONF (TUSB_SYS_REG_BASE + 0x03c) +#define TUSB_USBIP_INT_SRC (TUSB_SYS_REG_BASE + 0x040) +#define TUSB_USBIP_INT_SET (TUSB_SYS_REG_BASE + 0x044) +#define TUSB_USBIP_INT_CLEAR (TUSB_SYS_REG_BASE + 0x048) +#define TUSB_USBIP_INT_MASK (TUSB_SYS_REG_BASE + 0x04c) +#define TUSB_DMA_INT_SRC (TUSB_SYS_REG_BASE + 0x050) +#define TUSB_DMA_INT_SET (TUSB_SYS_REG_BASE + 0x054) +#define TUSB_DMA_INT_CLEAR (TUSB_SYS_REG_BASE + 0x058) +#define TUSB_DMA_INT_MASK (TUSB_SYS_REG_BASE + 0x05c) +#define TUSB_GPIO_INT_SRC (TUSB_SYS_REG_BASE + 0x060) +#define TUSB_GPIO_INT_SET (TUSB_SYS_REG_BASE + 0x064) +#define TUSB_GPIO_INT_CLEAR (TUSB_SYS_REG_BASE + 0x068) +#define TUSB_GPIO_INT_MASK (TUSB_SYS_REG_BASE + 0x06c) /* NOR flash interrupt source registers */ -#define TUSB_INT_SRC (TUSB_SYS_REG_BASE + 0x070) -#define TUSB_INT_SRC_SET (TUSB_SYS_REG_BASE + 0x074) -#define TUSB_INT_SRC_CLEAR (TUSB_SYS_REG_BASE + 0x078) -#define TUSB_INT_MASK (TUSB_SYS_REG_BASE + 0x07c) -#define TUSB_INT_SRC_TXRX_DMA_DONE (1 << 24) -#define TUSB_INT_SRC_USB_IP_CORE (1 << 17) -#define TUSB_INT_SRC_OTG_TIMEOUT (1 << 16) -#define TUSB_INT_SRC_VBUS_SENSE_CHNG (1 << 15) -#define TUSB_INT_SRC_ID_STATUS_CHNG (1 << 14) -#define TUSB_INT_SRC_DEV_WAKEUP (1 << 13) -#define TUSB_INT_SRC_DEV_READY (1 << 12) -#define TUSB_INT_SRC_USB_IP_TX (1 << 9) -#define TUSB_INT_SRC_USB_IP_RX (1 << 8) -#define TUSB_INT_SRC_USB_IP_VBUS_ERR (1 << 7) -#define TUSB_INT_SRC_USB_IP_VBUS_REQ (1 << 6) -#define TUSB_INT_SRC_USB_IP_DISCON (1 << 5) -#define TUSB_INT_SRC_USB_IP_CONN (1 << 4) -#define TUSB_INT_SRC_USB_IP_SOF (1 << 3) -#define TUSB_INT_SRC_USB_IP_RST_BABBLE (1 << 2) -#define TUSB_INT_SRC_USB_IP_RESUME (1 << 1) -#define TUSB_INT_SRC_USB_IP_SUSPEND (1 << 0) +#define TUSB_INT_SRC (TUSB_SYS_REG_BASE + 0x070) +#define TUSB_INT_SRC_SET (TUSB_SYS_REG_BASE + 0x074) +#define TUSB_INT_SRC_CLEAR (TUSB_SYS_REG_BASE + 0x078) +#define TUSB_INT_MASK (TUSB_SYS_REG_BASE + 0x07c) +#define TUSB_INT_SRC_TXRX_DMA_DONE (1 << 24) +#define TUSB_INT_SRC_USB_IP_CORE (1 << 17) +#define TUSB_INT_SRC_OTG_TIMEOUT (1 << 16) +#define TUSB_INT_SRC_VBUS_SENSE_CHNG (1 << 15) +#define TUSB_INT_SRC_ID_STATUS_CHNG (1 << 14) +#define TUSB_INT_SRC_DEV_WAKEUP (1 << 13) +#define TUSB_INT_SRC_DEV_READY (1 << 12) +#define TUSB_INT_SRC_USB_IP_TX (1 << 9) +#define TUSB_INT_SRC_USB_IP_RX (1 << 8) +#define TUSB_INT_SRC_USB_IP_VBUS_ERR (1 << 7) +#define TUSB_INT_SRC_USB_IP_VBUS_REQ (1 << 6) +#define TUSB_INT_SRC_USB_IP_DISCON (1 << 5) +#define TUSB_INT_SRC_USB_IP_CONN (1 << 4) +#define TUSB_INT_SRC_USB_IP_SOF (1 << 3) +#define TUSB_INT_SRC_USB_IP_RST_BABBLE (1 << 2) +#define TUSB_INT_SRC_USB_IP_RESUME (1 << 1) +#define TUSB_INT_SRC_USB_IP_SUSPEND (1 << 0) -#define TUSB_GPIO_REV (TUSB_SYS_REG_BASE + 0x080) -#define TUSB_GPIO_CONF (TUSB_SYS_REG_BASE + 0x084) -#define TUSB_DMA_CTRL_REV (TUSB_SYS_REG_BASE + 0x100) -#define TUSB_DMA_REQ_CONF (TUSB_SYS_REG_BASE + 0x104) -#define TUSB_EP0_CONF (TUSB_SYS_REG_BASE + 0x108) -#define TUSB_EP_IN_SIZE (TUSB_SYS_REG_BASE + 0x10c) -#define TUSB_DMA_EP_MAP (TUSB_SYS_REG_BASE + 0x148) -#define TUSB_EP_OUT_SIZE (TUSB_SYS_REG_BASE + 0x14c) -#define TUSB_EP_MAX_PACKET_SIZE_OFFSET (TUSB_SYS_REG_BASE + 0x188) -#define TUSB_SCRATCH_PAD (TUSB_SYS_REG_BASE + 0x1c4) -#define TUSB_WAIT_COUNT (TUSB_SYS_REG_BASE + 0x1c8) -#define TUSB_PROD_TEST_RESET (TUSB_SYS_REG_BASE + 0x1d8) +#define TUSB_GPIO_REV (TUSB_SYS_REG_BASE + 0x080) +#define TUSB_GPIO_CONF (TUSB_SYS_REG_BASE + 0x084) +#define TUSB_DMA_CTRL_REV (TUSB_SYS_REG_BASE + 0x100) +#define TUSB_DMA_REQ_CONF (TUSB_SYS_REG_BASE + 0x104) +#define TUSB_EP0_CONF (TUSB_SYS_REG_BASE + 0x108) +#define TUSB_EP_IN_SIZE (TUSB_SYS_REG_BASE + 0x10c) +#define TUSB_DMA_EP_MAP (TUSB_SYS_REG_BASE + 0x148) +#define TUSB_EP_OUT_SIZE (TUSB_SYS_REG_BASE + 0x14c) +#define TUSB_EP_MAX_PACKET_SIZE_OFFSET (TUSB_SYS_REG_BASE + 0x188) +#define TUSB_SCRATCH_PAD (TUSB_SYS_REG_BASE + 0x1c4) +#define TUSB_WAIT_COUNT (TUSB_SYS_REG_BASE + 0x1c8) +#define TUSB_PROD_TEST_RESET (TUSB_SYS_REG_BASE + 0x1d8) -#define TUSB_DIDR1_LO (TUSB_SYS_REG_BASE + 0x1f8) -#define TUSB_DIDR1_HI (TUSB_SYS_REG_BASE + 0x1fc) +#define TUSB_DIDR1_LO (TUSB_SYS_REG_BASE + 0x1f8) +#define TUSB_DIDR1_HI (TUSB_SYS_REG_BASE + 0x1fc) /* Device System & Control register bitfields */ -#define TUSB_INT_CTRL_CONF_INT_RLCYC(v) (((v) & 0x7) << 18) -#define TUSB_INT_CTRL_CONF_INT_POLARITY (1 << 17) -#define TUSB_INT_CTRL_CONF_INT_MODE (1 << 16) -#define TUSB_GPIO_CONF_DMAREQ(v) (((v) & 0x3f) << 24) -#define TUSB_DMA_REQ_CONF_BURST_SIZE(v) (((v) & 3) << 26) -#define TUSB_DMA_REQ_CONF_DMA_RQ_EN(v) (((v) & 0x3f) << 20) -#define TUSB_DMA_REQ_CONF_DMA_RQ_ASR(v) (((v) & 0xf) << 16) -#define TUSB_EP0_CONFIG_SW_EN (1 << 8) -#define TUSB_EP0_CONFIG_DIR_TX (1 << 7) -#define TUSB_EP0_CONFIG_XFR_SIZE(v) ((v) & 0x7f) -#define TUSB_EP_CONFIG_SW_EN (1 << 31) -#define TUSB_EP_CONFIG_XFR_SIZE(v) ((v) & 0x7fffffff) -#define TUSB_PROD_TEST_RESET_VAL 0xa596 +#define TUSB_INT_CTRL_CONF_INT_RLCYC(v) (((v) & 0x7) << 18) +#define TUSB_INT_CTRL_CONF_INT_POLARITY (1 << 17) +#define TUSB_INT_CTRL_CONF_INT_MODE (1 << 16) +#define TUSB_GPIO_CONF_DMAREQ(v) (((v) & 0x3f) << 24) +#define TUSB_DMA_REQ_CONF_BURST_SIZE(v) (((v) & 3) << 26) +#define TUSB_DMA_REQ_CONF_DMA_RQ_EN(v) (((v) & 0x3f) << 20) +#define TUSB_DMA_REQ_CONF_DMA_RQ_ASR(v) (((v) & 0xf) << 16) +#define TUSB_EP0_CONFIG_SW_EN (1 << 8) +#define TUSB_EP0_CONFIG_DIR_TX (1 << 7) +#define TUSB_EP0_CONFIG_XFR_SIZE(v) ((v) & 0x7f) +#define TUSB_EP_CONFIG_SW_EN (1 << 31) +#define TUSB_EP_CONFIG_XFR_SIZE(v) ((v) & 0x7fffffff) +#define TUSB_PROD_TEST_RESET_VAL 0xa596 static void tusb_intr_update(TUSBState *s) { @@ -336,7 +336,7 @@ static uint32_t tusb_async_readw(void *opaque, hwaddr addr) case TUSB_PHY_OTG_CTRL_ENABLE: case TUSB_PHY_OTG_CTRL: - return 0x00; /* TODO */ + return 0x00; /* TODO */ case TUSB_DEV_OTG_STAT: ret = s->otg_status; @@ -355,7 +355,7 @@ static uint32_t tusb_async_readw(void *opaque, hwaddr addr) case TUSB_PRCM_MNGMT: return s->prcm_mngmt; case TUSB_PRCM_WAKEUP_SOURCE: - case TUSB_PRCM_WAKEUP_CLEAR: /* TODO: What does this one return? */ + case TUSB_PRCM_WAKEUP_CLEAR: /* TODO: What does this one return? */ return 0x00000000; case TUSB_PRCM_WAKEUP_MASK: return s->wkup_mask; @@ -371,20 +371,20 @@ static uint32_t tusb_async_readw(void *opaque, hwaddr addr) return s->control_config; case TUSB_USBIP_INT_SRC: - case TUSB_USBIP_INT_SET: /* TODO: What do these two return? */ + case TUSB_USBIP_INT_SET: /* TODO: What do these two return? */ case TUSB_USBIP_INT_CLEAR: return s->usbip_intr; case TUSB_USBIP_INT_MASK: return s->usbip_mask; case TUSB_DMA_INT_SRC: - case TUSB_DMA_INT_SET: /* TODO: What do these two return? */ + case TUSB_DMA_INT_SET: /* TODO: What do these two return? */ case TUSB_DMA_INT_CLEAR: return s->dma_intr; case TUSB_DMA_INT_MASK: return s->dma_mask; - case TUSB_GPIO_INT_SRC: /* TODO: What do these two return? */ + case TUSB_GPIO_INT_SRC: /* TODO: What do these two return? */ case TUSB_GPIO_INT_SET: case TUSB_GPIO_INT_CLEAR: return s->gpio_intr; @@ -392,7 +392,7 @@ static uint32_t tusb_async_readw(void *opaque, hwaddr addr) return s->gpio_mask; case TUSB_INT_SRC: - case TUSB_INT_SRC_SET: /* TODO: What do these two return? */ + case TUSB_INT_SRC_SET: /* TODO: What do these two return? */ case TUSB_INT_SRC_CLEAR: return s->intr; case TUSB_INT_MASK: @@ -419,9 +419,9 @@ static uint32_t tusb_async_readw(void *opaque, hwaddr addr) return s->rx_config[epnum]; case TUSB_EP_MAX_PACKET_SIZE_OFFSET ... (TUSB_EP_MAX_PACKET_SIZE_OFFSET + 0x3b): - return 0x00000000; /* TODO */ + return 0x00000000; /* TODO */ case TUSB_WAIT_COUNT: - return 0x00; /* TODO */ + return 0x00; /* TODO */ case TUSB_SCRATCH_PAD: return s->scratch; @@ -510,7 +510,7 @@ static void tusb_async_writew(void *opaque, hwaddr addr, case TUSB_PHY_OTG_CTRL_ENABLE: case TUSB_PHY_OTG_CTRL: - return; /* TODO */ + return; /* TODO */ case TUSB_DEV_OTG_TIMER: s->otg_timer_val = value; if (value & TUSB_DEV_OTG_TIMER_ENABLE) @@ -623,9 +623,9 @@ static void tusb_async_writew(void *opaque, hwaddr addr, break; case TUSB_EP_MAX_PACKET_SIZE_OFFSET ... (TUSB_EP_MAX_PACKET_SIZE_OFFSET + 0x3b): - return; /* TODO */ + return; /* TODO */ case TUSB_WAIT_COUNT: - return; /* TODO */ + return; /* TODO */ case TUSB_SCRATCH_PAD: s->scratch = value; @@ -748,7 +748,7 @@ static void tusb6010_reset(DeviceState *dev) s->test_reset = TUSB_PROD_TEST_RESET_VAL; s->host_mode = 0; s->dev_config = 0; - s->otg_status = 0; /* !TUSB_DEV_OTG_STAT_ID_STATUS means host mode */ + s->otg_status = 0; /* !TUSB_DEV_OTG_STAT_ID_STATUS means host mode */ s->power = 0; s->mask = 0xffffffff; s->intr = 0x00000000;

hw/usb: whitespace fix in tusb6010.c

Commit Message

Comments

Patch