@@ -110,3 +110,4 @@ CONFIG_IOH3420=y
CONFIG_I82801B11=y
CONFIG_ACPI=y
CONFIG_SMBIOS=y
+CONFIG_ASPEED_SOC=y
@@ -32,3 +32,4 @@ obj-$(CONFIG_MC146818RTC) += mc146818rtc.o
obj-$(CONFIG_ALLWINNER_A10_PIT) += allwinner-a10-pit.o
common-obj-$(CONFIG_STM32F2XX_TIMER) += stm32f2xx_timer.o
+common-obj-$(CONFIG_ASPEED_SOC) += aspeed_timer.o
new file mode 100644
@@ -0,0 +1,449 @@
+/*
+ * ASPEED AST2400 Timer
+ *
+ * Andrew Jeffery <andrew@aj.id.au>
+ *
+ * Copyright (C) 2016 IBM Corp.
+ *
+ * This code is licensed under the GPL version 2 or later. See
+ * the COPYING file in the top-level directory.
+ */
+
+#include "qemu/osdep.h"
+#include "hw/ptimer.h"
+#include "hw/sysbus.h"
+#include "hw/timer/aspeed_timer.h"
+#include "qemu-common.h"
+#include "qemu/bitops.h"
+#include "qemu/main-loop.h"
+#include "qemu/timer.h"
+#include "trace.h"
+
+#define TIMER_NR_REGS 4
+
+#define TIMER_CTRL_BITS 4
+#define TIMER_CTRL_MASK ((1 << TIMER_CTRL_BITS) - 1)
+
+#define TIMER_CLOCK_USE_EXT true
+#define TIMER_CLOCK_EXT_HZ 1000000
+#define TIMER_CLOCK_USE_APB false
+#define TIMER_CLOCK_APB_HZ 24000000
+
+#define TIMER_REG_STATUS 0
+#define TIMER_REG_RELOAD 1
+#define TIMER_REG_MATCH_FIRST 2
+#define TIMER_REG_MATCH_SECOND 3
+
+#define TIMER_FIRST_CAP_PULSE 4
+
+enum timer_ctrl_op {
+ op_enable = 0,
+ op_external_clock,
+ op_overflow_interrupt,
+ op_pulse_enable
+};
+
+/**
+ * Avoid mutual references between AspeedTimerCtrlState and AspeedTimer
+ * structs, as it's a waste of memory. The ptimer BH callback needs to know
+ * whether a specific AspeedTimer is enabled, but this information is held in
+ * AspeedTimerCtrlState. So, provide a helper to hoist ourselves from an
+ * arbitrary AspeedTimer to AspeedTimerCtrlState.
+ */
+static inline AspeedTimerCtrlState *timer_to_ctrl(AspeedTimer *t)
+{
+ const AspeedTimer (*timers)[] = (void *)t - (t->id * sizeof(*t));
+ return container_of(timers, AspeedTimerCtrlState, timers);
+}
+
+static inline bool timer_ctrl_status(AspeedTimer *t, enum timer_ctrl_op op)
+{
+ return !!(timer_to_ctrl(t)->ctrl & BIT(t->id * TIMER_CTRL_BITS + op));
+}
+
+static inline bool timer_enabled(AspeedTimer *t)
+{
+ return timer_ctrl_status(t, op_enable);
+}
+
+static inline bool timer_overflow_interrupt(AspeedTimer *t)
+{
+ return timer_ctrl_status(t, op_overflow_interrupt);
+}
+
+static inline bool timer_can_pulse(AspeedTimer *t)
+{
+ return t->id >= TIMER_FIRST_CAP_PULSE;
+}
+
+static void aspeed_timer_expire(void *opaque)
+{
+ AspeedTimer *t = opaque;
+
+ /* Only support interrupts on match values of zero for the moment - this is
+ * sufficient to boot an aspeed_defconfig Linux kernel.
+ *
+ * TODO: matching on arbitrary values (see e.g. hw/timer/a9gtimer.c)
+ */
+ bool match = !(t->match[0] && t->match[1]);
+ bool interrupt = timer_overflow_interrupt(t) || match;
+ if (timer_enabled(t) && interrupt) {
+ t->level = !t->level;
+ qemu_set_irq(t->irq, t->level);
+ }
+}
+
+static uint64_t aspeed_timer_get_value(AspeedTimer *t, int reg)
+{
+ uint64_t value;
+
+ switch (reg) {
+ case TIMER_REG_STATUS:
+ value = ptimer_get_count(t->timer);
+ break;
+ case TIMER_REG_RELOAD:
+ value = t->reload;
+ break;
+ case TIMER_REG_MATCH_FIRST:
+ case TIMER_REG_MATCH_SECOND:
+ value = t->match[reg - 2];
+ break;
+ default:
+ qemu_log_mask(LOG_UNIMP, "%s: Programming error: unexpected reg: %d\n",
+ __func__, reg);
+ value = 0;
+ break;
+ }
+ return value;
+}
+
+static uint64_t aspeed_timer_read(void *opaque, hwaddr offset, unsigned size)
+{
+ AspeedTimerCtrlState *s = opaque;
+ const int reg = (offset & 0xf) / 4;
+ uint64_t value;
+
+ switch (offset) {
+ case 0x30: /* Control Register */
+ value = s->ctrl;
+ break;
+ case 0x34: /* Control Register 2 */
+ value = s->ctrl2;
+ break;
+ case 0x00 ... 0x2c: /* Timers 1 - 4 */
+ value = aspeed_timer_get_value(&s->timers[(offset >> 4)], reg);
+ break;
+ case 0x40 ... 0x8c: /* Timers 5 - 8 */
+ value = aspeed_timer_get_value(&s->timers[(offset >> 4) - 1], reg);
+ break;
+ /* Illegal */
+ case 0x38:
+ case 0x3C:
+ default:
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIx "\n",
+ __func__, offset);
+ value = 0;
+ break;
+ }
+ trace_aspeed_timer_read(offset, size, value);
+ return value;
+}
+
+static void aspeed_timer_set_value(AspeedTimerCtrlState *s, int timer, int reg,
+ uint32_t value)
+{
+ AspeedTimer *t;
+
+ trace_aspeed_timer_set_value(timer, reg, value);
+ t = &s->timers[timer];
+ switch (reg) {
+ case TIMER_REG_STATUS:
+ if (timer_enabled(t)) {
+ ptimer_set_count(t->timer, value);
+ }
+ break;
+ case TIMER_REG_RELOAD:
+ t->reload = value;
+ ptimer_set_limit(t->timer, value, 1);
+ break;
+ case TIMER_REG_MATCH_FIRST:
+ case TIMER_REG_MATCH_SECOND:
+ if (value) {
+ /* Non-zero match values are unsupported. As such an interrupt will
+ * always be triggered when the timer reaches zero even if the
+ * overflow interrupt control bit is clear.
+ */
+ qemu_log_mask(LOG_UNIMP, "%s: Match value unsupported by device: "
+ "0x%" PRIx32 "\n", __func__, value);
+ } else {
+ t->match[reg - 2] = value;
+ }
+ break;
+ default:
+ qemu_log_mask(LOG_UNIMP, "%s: Programming error: unexpected reg: %d\n",
+ __func__, reg);
+ break;
+ }
+}
+
+/* Control register operations are broken out into helpers that can be
+ * explictly called on aspeed_timer_reset(), but also from
+ * aspeed_timer_ctrl_op().
+ */
+
+static void aspeed_timer_ctrl_enable(AspeedTimer *t, bool enable)
+{
+ trace_aspeed_timer_ctrl_enable(t->id, enable);
+ if (enable) {
+ ptimer_run(t->timer, 0);
+ } else {
+ ptimer_stop(t->timer);
+ ptimer_set_limit(t->timer, t->reload, 1);
+ }
+}
+
+static void aspeed_timer_ctrl_external_clock(AspeedTimer *t, bool enable)
+{
+ trace_aspeed_timer_ctrl_external_clock(t->id, enable);
+ if (enable) {
+ ptimer_set_freq(t->timer, TIMER_CLOCK_EXT_HZ);
+ } else {
+ ptimer_set_freq(t->timer, TIMER_CLOCK_APB_HZ);
+ }
+}
+
+static void aspeed_timer_ctrl_overflow_interrupt(AspeedTimer *t, bool enable)
+{
+ trace_aspeed_timer_ctrl_overflow_interrupt(t->id, enable);
+}
+
+static void aspeed_timer_ctrl_pulse_enable(AspeedTimer *t, bool enable)
+{
+ if (timer_can_pulse(t)) {
+ trace_aspeed_timer_ctrl_pulse_enable(t->id, enable);
+ } else {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: Timer does not support pulse mode\n", __func__);
+ }
+}
+
+/**
+ * Given the actions are fixed in number and completely described in helper
+ * functions, dispatch with a lookup table rather than manage control flow with
+ * a switch statement.
+ */
+static void (*const ctrl_ops[])(AspeedTimer *, bool) = {
+ [op_enable] = aspeed_timer_ctrl_enable,
+ [op_external_clock] = aspeed_timer_ctrl_external_clock,
+ [op_overflow_interrupt] = aspeed_timer_ctrl_overflow_interrupt,
+ [op_pulse_enable] = aspeed_timer_ctrl_pulse_enable,
+};
+
+/**
+ * Conditionally affect changes chosen by a timer's control bit.
+ *
+ * The aspeed_timer_ctrl_op() interface is convenient for the
+ * aspeed_timer_set_ctrl() function as the "no change" early exit can be
+ * calculated for all operations, which cleans up the caller code. However the
+ * interface isn't convenient for the reset function where we want to enter a
+ * specific state without artificially constructing old and new values that
+ * will fall through the change guard (and motivates extracting the actions
+ * out to helper functions).
+ *
+ * @t: The timer to manipulate
+ * @op: The type of operation to be performed
+ * @old: The old state of the timer's control bits
+ * @new: The incoming state for the timer's control bits
+ */
+static void aspeed_timer_ctrl_op(AspeedTimer *t, enum timer_ctrl_op op,
+ uint8_t old, uint8_t new)
+{
+ const uint8_t mask = BIT(op);
+ const bool enable = !!(new & mask);
+ const bool changed = ((old ^ new) & mask);
+ if (!changed) {
+ return;
+ }
+ ctrl_ops[op](t, enable);
+}
+
+static void aspeed_timer_set_ctrl(AspeedTimerCtrlState *s, uint32_t reg)
+{
+ int i;
+ int shift;
+ uint8_t t_old, t_new;
+ AspeedTimer *t;
+ const uint8_t enable_mask = BIT(op_enable);
+
+ /* Handle a dependency between the 'enable' and remaining three
+ * configuration bits - i.e. if more than one bit in the control set has
+ * changed, including the 'enable' bit, then we want either disable the
+ * timer and perform configuration, or perform configuration and then
+ * enable the timer
+ */
+ for (i = 0; i < ASPEED_TIMER_NR_TIMERS; i++) {
+ t = &s->timers[i];
+ shift = (i * TIMER_CTRL_BITS);
+ t_old = (s->ctrl >> shift) & TIMER_CTRL_MASK;
+ t_new = (reg >> shift) & TIMER_CTRL_MASK;
+
+ /* If we are disabling, do so first */
+ if ((t_old & enable_mask) && !(t_new & enable_mask)) {
+ aspeed_timer_ctrl_enable(t, false);
+ }
+ aspeed_timer_ctrl_op(t, op_external_clock, t_old, t_new);
+ aspeed_timer_ctrl_op(t, op_overflow_interrupt, t_old, t_new);
+ aspeed_timer_ctrl_op(t, op_pulse_enable, t_old, t_new);
+ /* If we are enabling, do so last */
+ if (!(t_old & enable_mask) && (t_new & enable_mask)) {
+ aspeed_timer_ctrl_enable(t, true);
+ }
+ }
+ s->ctrl = reg;
+}
+
+static void aspeed_timer_set_ctrl2(AspeedTimerCtrlState *s, uint32_t value)
+{
+ trace_aspeed_timer_set_ctrl2(value);
+}
+
+static void aspeed_timer_write(void *opaque, hwaddr offset, uint64_t value,
+ unsigned size)
+{
+ const uint32_t tv = (uint32_t)(value & 0xFFFFFFFF);
+ const int reg = (offset & 0xf) / 4;
+ AspeedTimerCtrlState *s = opaque;
+
+ switch (offset) {
+ /* Control Registers */
+ case 0x30:
+ aspeed_timer_set_ctrl(s, tv);
+ break;
+ case 0x34:
+ aspeed_timer_set_ctrl2(s, tv);
+ break;
+ /* Timer Registers */
+ case 0x00 ... 0x2c:
+ aspeed_timer_set_value(s, (offset >> TIMER_NR_REGS), reg, tv);
+ break;
+ case 0x40 ... 0x8c:
+ aspeed_timer_set_value(s, (offset >> TIMER_NR_REGS) - 1, reg, tv);
+ break;
+ /* Illegal */
+ case 0x38:
+ case 0x3C:
+ default:
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIx "\n",
+ __func__, offset);
+ break;
+ }
+}
+
+static const MemoryRegionOps aspeed_timer_ops = {
+ .read = aspeed_timer_read,
+ .write = aspeed_timer_write,
+ .endianness = DEVICE_LITTLE_ENDIAN,
+ .valid.min_access_size = 4,
+ .valid.max_access_size = 4,
+ .valid.unaligned = false,
+};
+
+static void aspeed_init_one_timer(AspeedTimerCtrlState *s, uint8_t id)
+{
+ QEMUBH *bh;
+ AspeedTimer *t = &s->timers[id];
+
+ t->id = id;
+ bh = qemu_bh_new(aspeed_timer_expire, t);
+ t->timer = ptimer_init(bh);
+}
+
+static void aspeed_timer_realize(DeviceState *dev, Error **errp)
+{
+ int i;
+ SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
+ AspeedTimerCtrlState *s = ASPEED_TIMER(dev);
+
+ for (i = 0; i < ASPEED_TIMER_NR_TIMERS; i++) {
+ aspeed_init_one_timer(s, i);
+ sysbus_init_irq(sbd, &s->timers[i].irq);
+ }
+ memory_region_init_io(&s->iomem, OBJECT(s), &aspeed_timer_ops, s,
+ TYPE_ASPEED_TIMER, 0x1000);
+ sysbus_init_mmio(sbd, &s->iomem);
+}
+
+static void aspeed_timer_reset(DeviceState *dev)
+{
+ int i;
+ AspeedTimerCtrlState *s = ASPEED_TIMER(dev);
+
+ for (i = 0; i < ASPEED_TIMER_NR_TIMERS; i++) {
+ AspeedTimer *t = &s->timers[i];
+ /* Explictly call helpers to avoid any conditional behaviour through
+ * aspeed_timer_set_ctrl().
+ */
+ aspeed_timer_ctrl_enable(t, false);
+ aspeed_timer_ctrl_external_clock(t, TIMER_CLOCK_USE_APB);
+ aspeed_timer_ctrl_overflow_interrupt(t, false);
+ aspeed_timer_ctrl_pulse_enable(t, false);
+ t->level = 0;
+ t->reload = 0;
+ t->match[0] = 0;
+ t->match[1] = 0;
+ }
+ s->ctrl = 0;
+ s->ctrl2 = 0;
+}
+
+static const VMStateDescription vmstate_aspeed_timer = {
+ .name = "aspeed.timer",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT8(id, AspeedTimer),
+ VMSTATE_INT32(level, AspeedTimer),
+ VMSTATE_PTIMER(timer, AspeedTimer),
+ VMSTATE_UINT32(reload, AspeedTimer),
+ VMSTATE_UINT32_ARRAY(match, AspeedTimer, 2),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static const VMStateDescription vmstate_aspeed_timer_state = {
+ .name = "aspeed.timerctrl",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT32(ctrl, AspeedTimerCtrlState),
+ VMSTATE_UINT32(ctrl2, AspeedTimerCtrlState),
+ VMSTATE_STRUCT_ARRAY(timers, AspeedTimerCtrlState,
+ ASPEED_TIMER_NR_TIMERS, 1, vmstate_aspeed_timer,
+ AspeedTimer),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static void timer_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+
+ dc->realize = aspeed_timer_realize;
+ dc->reset = aspeed_timer_reset;
+ dc->desc = "ASPEED Timer";
+ dc->vmsd = &vmstate_aspeed_timer_state;
+}
+
+static const TypeInfo aspeed_timer_info = {
+ .name = TYPE_ASPEED_TIMER,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(AspeedTimerCtrlState),
+ .class_init = timer_class_init,
+};
+
+static void aspeed_timer_register_types(void)
+{
+ type_register_static(&aspeed_timer_info);
+}
+
+type_init(aspeed_timer_register_types)
new file mode 100644
@@ -0,0 +1,59 @@
+/*
+ * ASPEED AST2400 Timer
+ *
+ * Andrew Jeffery <andrew@aj.id.au>
+ *
+ * Copyright (C) 2016 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+#ifndef ASPEED_TIMER_H
+#define ASPEED_TIMER_H
+
+#include "hw/ptimer.h"
+
+#define ASPEED_TIMER(obj) \
+ OBJECT_CHECK(AspeedTimerCtrlState, (obj), TYPE_ASPEED_TIMER);
+#define TYPE_ASPEED_TIMER "aspeed.timer"
+#define ASPEED_TIMER_NR_TIMERS 8
+
+typedef struct AspeedTimer {
+ qemu_irq irq;
+
+ uint8_t id;
+
+ /**
+ * Track the line level as the ASPEED timers implement edge triggered
+ * interrupts, signalling with both the rising and falling edge.
+ */
+ int32_t level;
+ ptimer_state *timer;
+ uint32_t reload;
+ uint32_t match[2];
+} AspeedTimer;
+
+typedef struct AspeedTimerCtrlState {
+ /*< private >*/
+ SysBusDevice parent;
+
+ /*< public >*/
+ MemoryRegion iomem;
+
+ uint32_t ctrl;
+ uint32_t ctrl2;
+ AspeedTimer timers[ASPEED_TIMER_NR_TIMERS];
+} AspeedTimerCtrlState;
+
+#endif /* ASPEED_TIMER_H */
@@ -1892,3 +1892,12 @@ qio_channel_command_new_pid(void *ioc, int writefd, int readfd, int pid) "Comman
qio_channel_command_new_spawn(void *ioc, const char *binary, int flags) "Command new spawn ioc=%p binary=%s flags=%d"
qio_channel_command_abort(void *ioc, int pid) "Command abort ioc=%p pid=%d"
qio_channel_command_wait(void *ioc, int pid, int ret, int status) "Command abort ioc=%p pid=%d ret=%d status=%d"
+
+# hw/timer/aspeed_timer.c
+aspeed_timer_ctrl_enable(uint8_t i, bool enable) "Timer %" PRIu8 ": %d"
+aspeed_timer_ctrl_external_clock(uint8_t i, bool enable) "Timer %" PRIu8 ": %d"
+aspeed_timer_ctrl_overflow_interrupt(uint8_t i, bool enable) "Timer %" PRIu8 ": %d"
+aspeed_timer_ctrl_pulse_enable(uint8_t i, bool enable) "Timer %" PRIu8 ": %d"
+aspeed_timer_set_ctrl2(uint32_t value) "Value: 0x%" PRIx32
+aspeed_timer_set_value(int timer, int reg, uint32_t value) "Timer %d register %d: 0x%" PRIx32
+aspeed_timer_read(uint64_t offset, unsigned size, uint64_t value) "From 0x%" PRIx64 ": of size %u: 0x%" PRIx64