diff mbox

[v5,7/7] block: drop support for using qcow[2] encryption with system emulators

Message ID 1458237102-16204-8-git-send-email-berrange@redhat.com
State New, archived
Headers show

Commit Message

Daniel P. Berrangé March 17, 2016, 5:51 p.m. UTC
For a couple of releases we have been warning

  Encrypted images are deprecated
  Support for them will be removed in a future release.
  You can use 'qemu-img convert' to convert your image to an unencrypted one.

This warning was issued by system emulators, qemu-img, qemu-nbd
and qemu-io. Such a broad warning was issued because the original
intention was to rip out all the code for dealing with encryption
inside the QEMU block layer APIs.

The new block encryption framework used for the LUKS driver does
not rely on the unloved block layer API for encryption keys,
instead using the QOM 'secret' object type. It is thus no longer
appropriate to warn about encryption unconditionally.

When the qcow/qcow2 drivers are converted to use the new encryption
framework too, it will be practical to keep AES-CBC support present
for use in qemu-img, qemu-io & qemu-nbd to allow for interoperability
with older QEMU versions and liberation of data from existing encrypted
qcow2 files.

Thus this change, removes the deprecation warning, in its place adding
a fatal error preventing use of qcow[2] built-in encryption inside the
system emulators. Use of qcow[2] encryption in qemu-img, qemu-io, qemu-nbd
no longer triggers any warning message, since that support is now expected
to remain available long term, given the maint burden has been eliminated.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
---
 block.c                    |  12 +-
 block/qcow.c               |  11 ++
 block/qcow2.c              |  11 ++
 include/block/block.h      |   1 +
 tests/qemu-iotests/049.out |   6 -
 tests/qemu-iotests/087.out |  22 +--
 tests/qemu-iotests/134.out |  18 ---
 tests/qemu-iotests/149.out | 372 ---------------------------------------------
 8 files changed, 30 insertions(+), 423 deletions(-)

Comments

Kevin Wolf March 18, 2016, 12:11 p.m. UTC | #1
Am 17.03.2016 um 18:51 hat Daniel P. Berrange geschrieben:
> For a couple of releases we have been warning
> 
>   Encrypted images are deprecated
>   Support for them will be removed in a future release.
>   You can use 'qemu-img convert' to convert your image to an unencrypted one.
> 
> This warning was issued by system emulators, qemu-img, qemu-nbd
> and qemu-io. Such a broad warning was issued because the original
> intention was to rip out all the code for dealing with encryption
> inside the QEMU block layer APIs.
> 
> The new block encryption framework used for the LUKS driver does
> not rely on the unloved block layer API for encryption keys,
> instead using the QOM 'secret' object type. It is thus no longer
> appropriate to warn about encryption unconditionally.
> 
> When the qcow/qcow2 drivers are converted to use the new encryption
> framework too, it will be practical to keep AES-CBC support present
> for use in qemu-img, qemu-io & qemu-nbd to allow for interoperability
> with older QEMU versions and liberation of data from existing encrypted
> qcow2 files.
> 
> Thus this change, removes the deprecation warning, in its place adding
> a fatal error preventing use of qcow[2] built-in encryption inside the
> system emulators. Use of qcow[2] encryption in qemu-img, qemu-io, qemu-nbd
> no longer triggers any warning message, since that support is now expected
> to remain available long term, given the maint burden has been eliminated.
> 
> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>

Let's do this only after the qcow2 LUKS support has been merged so that
users have an alternative to switch to.

Kevin
Daniel P. Berrangé March 18, 2016, 12:18 p.m. UTC | #2
On Fri, Mar 18, 2016 at 01:11:27PM +0100, Kevin Wolf wrote:
> Am 17.03.2016 um 18:51 hat Daniel P. Berrange geschrieben:
> > For a couple of releases we have been warning
> > 
> >   Encrypted images are deprecated
> >   Support for them will be removed in a future release.
> >   You can use 'qemu-img convert' to convert your image to an unencrypted one.
> > 
> > This warning was issued by system emulators, qemu-img, qemu-nbd
> > and qemu-io. Such a broad warning was issued because the original
> > intention was to rip out all the code for dealing with encryption
> > inside the QEMU block layer APIs.
> > 
> > The new block encryption framework used for the LUKS driver does
> > not rely on the unloved block layer API for encryption keys,
> > instead using the QOM 'secret' object type. It is thus no longer
> > appropriate to warn about encryption unconditionally.
> > 
> > When the qcow/qcow2 drivers are converted to use the new encryption
> > framework too, it will be practical to keep AES-CBC support present
> > for use in qemu-img, qemu-io & qemu-nbd to allow for interoperability
> > with older QEMU versions and liberation of data from existing encrypted
> > qcow2 files.
> > 
> > Thus this change, removes the deprecation warning, in its place adding
> > a fatal error preventing use of qcow[2] built-in encryption inside the
> > system emulators. Use of qcow[2] encryption in qemu-img, qemu-io, qemu-nbd
> > no longer triggers any warning message, since that support is now expected
> > to remain available long term, given the maint burden has been eliminated.
> > 
> > Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
> 
> Let's do this only after the qcow2 LUKS support has been merged so that
> users have an alternative to switch to.

Ok, I'll need to respin this to just move the deprecation warning
then

Regards,
Daniel
diff mbox

Patch

diff --git a/block.c b/block.c
index 4d1a9d3..d105ae4 100644
--- a/block.c
+++ b/block.c
@@ -293,6 +293,11 @@  static int bdrv_is_whitelisted(BlockDriver *drv, bool read_only)
     return 0;
 }
 
+bool bdrv_uses_whitelist(void)
+{
+    return use_bdrv_whitelist;
+}
+
 typedef struct CreateCo {
     BlockDriver *drv;
     char *filename;
@@ -1009,13 +1014,6 @@  static int bdrv_open_common(BlockDriverState *bs, BdrvChild *file,
         goto free_and_fail;
     }
 
-    if (bs->encrypted) {
-        error_report("Encrypted images are deprecated");
-        error_printf("Support for them will be removed in a future release.\n"
-                     "You can use 'qemu-img convert' to convert your image"
-                     " to an unencrypted one.\n");
-    }
-
     ret = refresh_total_sectors(bs, bs->total_sectors);
     if (ret < 0) {
         error_setg_errno(errp, -ret, "Could not refresh total sector count");
diff --git a/block/qcow.c b/block/qcow.c
index 2fd5ee6..cfa3781 100644
--- a/block/qcow.c
+++ b/block/qcow.c
@@ -161,6 +161,17 @@  static int qcow_open(BlockDriverState *bs, QDict *options, int flags,
     }
     s->crypt_method_header = header.crypt_method;
     if (s->crypt_method_header) {
+        if (s->crypt_method_header == QCOW_CRYPT_AES &&
+            bdrv_uses_whitelist()) {
+            error_setg(errp,
+                       "Use of AES-CBC encrypted qcow images is no longer "
+                       "supported in system emulators. You can use "
+                       "'qemu-img convert' to convert your image to use "
+                       "the LUKS format instead.");
+            ret = -ENOSYS;
+            goto fail;
+        }
+
         bs->encrypted = 1;
     }
     s->cluster_bits = header.cluster_bits;
diff --git a/block/qcow2.c b/block/qcow2.c
index 1ce6264..ba8b818 100644
--- a/block/qcow2.c
+++ b/block/qcow2.c
@@ -979,6 +979,17 @@  static int qcow2_open(BlockDriverState *bs, QDict *options, int flags,
     }
     s->crypt_method_header = header.crypt_method;
     if (s->crypt_method_header) {
+        if (s->crypt_method_header == QCOW_CRYPT_AES &&
+            bdrv_uses_whitelist()) {
+            error_setg(errp,
+                       "Use of AES-CBC encrypted qcow2 images is no longer "
+                       "supported in system emulators. You can use "
+                       "'qemu-img convert' to convert your image to use "
+                       "the LUKS format instead.");
+            ret = -ENOSYS;
+            goto fail;
+        }
+
         bs->encrypted = 1;
     }
 
diff --git a/include/block/block.h b/include/block/block.h
index bb8e97d..2920a1d 100644
--- a/include/block/block.h
+++ b/include/block/block.h
@@ -193,6 +193,7 @@  void bdrv_io_limits_update_group(BlockDriverState *bs, const char *group);
 
 void bdrv_init(void);
 void bdrv_init_with_whitelist(void);
+bool bdrv_uses_whitelist(void);
 BlockDriver *bdrv_find_protocol(const char *filename,
                                 bool allow_protocol_prefix,
                                 Error **errp);
diff --git a/tests/qemu-iotests/049.out b/tests/qemu-iotests/049.out
index a2b6703..4673b67 100644
--- a/tests/qemu-iotests/049.out
+++ b/tests/qemu-iotests/049.out
@@ -187,12 +187,6 @@  qemu-img create -f qcow2 -o encryption=off TEST_DIR/t.qcow2 64M
 Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 encryption=off cluster_size=65536 lazy_refcounts=off refcount_bits=16
 
 qemu-img create -f qcow2 -o encryption=on TEST_DIR/t.qcow2 64M
-qemu-img: Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
-qemu-img: Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 encryption=on cluster_size=65536 lazy_refcounts=off refcount_bits=16
 
 == Check lazy_refcounts option (only with v3) ==
diff --git a/tests/qemu-iotests/087.out b/tests/qemu-iotests/087.out
index 7d62cd5..f47d8d9 100644
--- a/tests/qemu-iotests/087.out
+++ b/tests/qemu-iotests/087.out
@@ -38,42 +38,24 @@  QMP_VERSION
 
 === Encrypted image ===
 
-qemu-img: Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
-qemu-img: Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 encryption=on
 Testing: -S
 QMP_VERSION
 {"return": {}}
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
-{"error": {"class": "GenericError", "desc": "blockdev-add doesn't support encrypted devices"}}
+{"error": {"class": "GenericError", "desc": "Use of AES-CBC encrypted qcow2 images is no longer supported in system emulators. You can use 'qemu-img convert' to convert your image to use the LUKS format instead."}}
 {"return": {}}
 {"timestamp": {"seconds":  TIMESTAMP, "microseconds":  TIMESTAMP}, "event": "SHUTDOWN"}
 
 Testing:
 QMP_VERSION
 {"return": {}}
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
-{"error": {"class": "GenericError", "desc": "Guest must be stopped for opening of encrypted image"}}
+{"error": {"class": "GenericError", "desc": "Use of AES-CBC encrypted qcow2 images is no longer supported in system emulators. You can use 'qemu-img convert' to convert your image to use the LUKS format instead."}}
 {"return": {}}
 {"timestamp": {"seconds":  TIMESTAMP, "microseconds":  TIMESTAMP}, "event": "SHUTDOWN"}
 
 
 === Missing driver ===
 
-qemu-img: Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
-qemu-img: Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 encryption=on
 Testing: -S
 QMP_VERSION
diff --git a/tests/qemu-iotests/134.out b/tests/qemu-iotests/134.out
index a16acb8..6493704 100644
--- a/tests/qemu-iotests/134.out
+++ b/tests/qemu-iotests/134.out
@@ -1,43 +1,25 @@ 
 QA output created by 134
-qemu-img: Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
-qemu-img: Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 encryption=on
 
 == reading whole image ==
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 Disk image 'TEST_DIR/t.qcow2' is encrypted.
 password:
 read 134217728/134217728 bytes at offset 0
 128 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 == rewriting whole image ==
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 Disk image 'TEST_DIR/t.qcow2' is encrypted.
 password:
 wrote 134217728/134217728 bytes at offset 0
 128 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 == verify pattern ==
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 Disk image 'TEST_DIR/t.qcow2' is encrypted.
 password:
 read 134217728/134217728 bytes at offset 0
 128 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 == verify pattern failure with wrong password ==
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 Disk image 'TEST_DIR/t.qcow2' is encrypted.
 password:
 Pattern verification failed at offset 0, 134217728 bytes
diff --git a/tests/qemu-iotests/149.out b/tests/qemu-iotests/149.out
index 0486dad..287f013 100644
--- a/tests/qemu-iotests/149.out
+++ b/tests/qemu-iotests/149.out
@@ -21,33 +21,21 @@  wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksClose qiotest-145-aes-256-xts-plain64-sha1
 # Read test pattern 0xa7
 qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain64-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x13
 qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain64-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x91
 qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain64-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x5e
 qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain64-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
@@ -93,33 +81,21 @@  wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksClose qiotest-145-aes-256-xts-plain64-sha1
 # Read test pattern 0xa7
 qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain64-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x13
 qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain64-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x91
 qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain64-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x5e
 qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain64-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
@@ -165,33 +141,21 @@  wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksClose qiotest-145-twofish-256-xts-plain64-sha1
 # Read test pattern 0xa7
 qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-twofish-256-xts-plain64-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x13
 qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-twofish-256-xts-plain64-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x91
 qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-twofish-256-xts-plain64-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x5e
 qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-twofish-256-xts-plain64-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
@@ -237,33 +201,21 @@  wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksClose qiotest-145-twofish-256-xts-plain64-sha1
 # Read test pattern 0xa7
 qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-twofish-256-xts-plain64-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x13
 qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-twofish-256-xts-plain64-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x91
 qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-twofish-256-xts-plain64-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x5e
 qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-twofish-256-xts-plain64-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
@@ -309,33 +261,21 @@  wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksClose qiotest-145-serpent-256-xts-plain64-sha1
 # Read test pattern 0xa7
 qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-256-xts-plain64-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x13
 qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-256-xts-plain64-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x91
 qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-256-xts-plain64-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x5e
 qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-256-xts-plain64-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
@@ -381,33 +321,21 @@  wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksClose qiotest-145-serpent-256-xts-plain64-sha1
 # Read test pattern 0xa7
 qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-256-xts-plain64-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x13
 qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-256-xts-plain64-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x91
 qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-256-xts-plain64-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x5e
 qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-256-xts-plain64-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
@@ -453,33 +381,21 @@  wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksClose qiotest-145-cast5-128-cbc-plain64-sha1
 # Read test pattern 0xa7
 qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-cast5-128-cbc-plain64-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x13
 qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-cast5-128-cbc-plain64-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x91
 qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-cast5-128-cbc-plain64-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x5e
 qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-cast5-128-cbc-plain64-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
@@ -525,33 +441,21 @@  wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksClose qiotest-145-cast5-128-cbc-plain64-sha1
 # Read test pattern 0xa7
 qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-cast5-128-cbc-plain64-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x13
 qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-cast5-128-cbc-plain64-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x91
 qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-cast5-128-cbc-plain64-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x5e
 qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-cast5-128-cbc-plain64-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
@@ -598,33 +502,21 @@  wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksClose qiotest-145-aes-256-cbc-plain-sha1
 # Read test pattern 0xa7
 qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-plain-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x13
 qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-plain-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x91
 qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-plain-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x5e
 qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-plain-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
@@ -670,33 +562,21 @@  wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksClose qiotest-145-aes-256-cbc-plain-sha1
 # Read test pattern 0xa7
 qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-plain-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x13
 qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-plain-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x91
 qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-plain-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x5e
 qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-plain-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
@@ -742,33 +622,21 @@  wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksClose qiotest-145-aes-256-cbc-plain64-sha1
 # Read test pattern 0xa7
 qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-plain64-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x13
 qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-plain64-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x91
 qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-plain64-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x5e
 qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-plain64-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
@@ -814,33 +682,21 @@  wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksClose qiotest-145-aes-256-cbc-plain64-sha1
 # Read test pattern 0xa7
 qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-plain64-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x13
 qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-plain64-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x91
 qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-plain64-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x5e
 qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-plain64-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
@@ -886,33 +742,21 @@  wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksClose qiotest-145-aes-256-cbc-essiv-sha256-sha1
 # Read test pattern 0xa7
 qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-essiv-sha256-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x13
 qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-essiv-sha256-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x91
 qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-essiv-sha256-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x5e
 qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-essiv-sha256-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
@@ -958,33 +802,21 @@  wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksClose qiotest-145-aes-256-cbc-essiv-sha256-sha1
 # Read test pattern 0xa7
 qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-essiv-sha256-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x13
 qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-essiv-sha256-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x91
 qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-essiv-sha256-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x5e
 qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-essiv-sha256-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
@@ -1030,33 +862,21 @@  wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksClose qiotest-145-aes-256-xts-essiv-sha256-sha1
 # Read test pattern 0xa7
 qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-essiv-sha256-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x13
 qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-essiv-sha256-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x91
 qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-essiv-sha256-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x5e
 qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-essiv-sha256-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
@@ -1102,33 +922,21 @@  wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksClose qiotest-145-aes-256-xts-essiv-sha256-sha1
 # Read test pattern 0xa7
 qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-essiv-sha256-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x13
 qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-essiv-sha256-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x91
 qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-essiv-sha256-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x5e
 qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-essiv-sha256-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
@@ -1174,33 +982,21 @@  wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksClose qiotest-145-aes-128-xts-plain64-sha256-sha1
 # Read test pattern 0xa7
 qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-128-xts-plain64-sha256-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x13
 qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-128-xts-plain64-sha256-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x91
 qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-128-xts-plain64-sha256-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x5e
 qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-128-xts-plain64-sha256-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
@@ -1246,33 +1042,21 @@  wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksClose qiotest-145-aes-128-xts-plain64-sha256-sha1
 # Read test pattern 0xa7
 qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-128-xts-plain64-sha256-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x13
 qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-128-xts-plain64-sha256-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x91
 qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-128-xts-plain64-sha256-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x5e
 qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-128-xts-plain64-sha256-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
@@ -1318,33 +1102,21 @@  wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksClose qiotest-145-aes-192-xts-plain64-sha256-sha1
 # Read test pattern 0xa7
 qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-192-xts-plain64-sha256-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x13
 qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-192-xts-plain64-sha256-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x91
 qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-192-xts-plain64-sha256-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x5e
 qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-192-xts-plain64-sha256-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
@@ -1390,33 +1162,21 @@  wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksClose qiotest-145-aes-192-xts-plain64-sha256-sha1
 # Read test pattern 0xa7
 qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-192-xts-plain64-sha256-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x13
 qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-192-xts-plain64-sha256-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x91
 qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-192-xts-plain64-sha256-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x5e
 qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-192-xts-plain64-sha256-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
@@ -1462,33 +1222,21 @@  wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksClose qiotest-145-twofish-128-xts-plain64-sha1
 # Read test pattern 0xa7
 qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-twofish-128-xts-plain64-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x13
 qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-twofish-128-xts-plain64-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x91
 qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-twofish-128-xts-plain64-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x5e
 qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-twofish-128-xts-plain64-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
@@ -1534,33 +1282,21 @@  wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksClose qiotest-145-twofish-128-xts-plain64-sha1
 # Read test pattern 0xa7
 qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-twofish-128-xts-plain64-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x13
 qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-twofish-128-xts-plain64-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x91
 qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-twofish-128-xts-plain64-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x5e
 qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-twofish-128-xts-plain64-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
@@ -1607,33 +1343,21 @@  wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksClose qiotest-145-serpent-128-xts-plain64-sha1
 # Read test pattern 0xa7
 qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-128-xts-plain64-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x13
 qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-128-xts-plain64-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x91
 qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-128-xts-plain64-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x5e
 qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-128-xts-plain64-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
@@ -1679,33 +1403,21 @@  wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksClose qiotest-145-serpent-128-xts-plain64-sha1
 # Read test pattern 0xa7
 qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-128-xts-plain64-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x13
 qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-128-xts-plain64-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x91
 qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-128-xts-plain64-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x5e
 qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-128-xts-plain64-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
@@ -1751,33 +1463,21 @@  wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksClose qiotest-145-serpent-192-xts-plain64-sha1
 # Read test pattern 0xa7
 qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-192-xts-plain64-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x13
 qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-192-xts-plain64-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x91
 qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-192-xts-plain64-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x5e
 qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-192-xts-plain64-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
@@ -1823,33 +1523,21 @@  wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksClose qiotest-145-serpent-192-xts-plain64-sha1
 # Read test pattern 0xa7
 qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-192-xts-plain64-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x13
 qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-192-xts-plain64-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x91
 qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-192-xts-plain64-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x5e
 qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-192-xts-plain64-sha1.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
@@ -1897,33 +1585,21 @@  wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksClose qiotest-145-aes-256-xts-plain64-sha256
 # Read test pattern 0xa7
 qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain64-sha256.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x13
 qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain64-sha256.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x91
 qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain64-sha256.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x5e
 qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain64-sha256.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
@@ -1969,33 +1645,21 @@  wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksClose qiotest-145-aes-256-xts-plain64-sha256
 # Read test pattern 0xa7
 qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain64-sha256.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x13
 qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain64-sha256.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x91
 qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain64-sha256.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x5e
 qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain64-sha256.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
@@ -2043,33 +1707,21 @@  wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksClose qiotest-145-aes-256-xts-plain-sha1-pwslot3
 # Read test pattern 0xa7
 qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=c2xvdDM=,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain-sha1-pwslot3.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x13
 qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=c2xvdDM=,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain-sha1-pwslot3.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x91
 qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=c2xvdDM=,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain-sha1-pwslot3.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x5e
 qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=c2xvdDM=,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain-sha1-pwslot3.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
@@ -2129,33 +1781,21 @@  wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksClose qiotest-145-aes-256-xts-plain-sha1-pwallslots
 # Read test pattern 0xa7
 qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=c2xvdDE=,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x13
 qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=c2xvdDE=,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x91
 qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=c2xvdDE=,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x5e
 qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=c2xvdDE=,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
@@ -2201,33 +1841,21 @@  wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksClose qiotest-145-aes-256-xts-plain-sha1-pwallslots
 # Read test pattern 0xa7
 qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=c2xvdDE=,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x13
 qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=c2xvdDE=,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x91
 qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=c2xvdDE=,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x5e
 qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=c2xvdDE=,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)