diff mbox

[v6,10/11] block: enable testing of LUKS driver with block I/O tests

Message ID 1458569512-22970-11-git-send-email-berrange@redhat.com (mailing list archive)
State New, archived
Headers show

Commit Message

Daniel P. Berrangé March 21, 2016, 2:11 p.m. UTC 
This adds support for testing the LUKS driver with the block
I/O test framework.

   cd tests/qemu-io-tests
   ./check -luks

A handful of test cases are modified to work with luks

 - 004 - whitelist luks format
 - 012 - use TEST_IMG_FILE instead of TEST_IMG for file ops
 - 048 - use TEST_IMG_FILE instead of TEST_IMG for file ops.
         don't assume extended image contents is all zeros,
         explicitly initialize with zeros
         Make file size smaller to avoid having to decrypt
         1 GB of data.
 - 052 - don't assume initial image contents is all zeros,
         explicitly initialize with zeros
 - 100 - don't assume initial image contents is all zeros,
         explicitly initialize with zeros

With this patch applied, the results are as follows:

  Passed: 001 002 003 004 005 008 009 010 011 012 021 032 043
          047 048 049 052 087 100 134 143
  Failed: 033 120 140 145
 Skipped: 007 013 014 015 017 018 019 020 022 023 024 025 026
          027 028 029 030 031 034 035 036 037 038 039 040 041
          042 043 044 045 046 047 049 050 051 053 054 055 056
          057 058 059 060 061 062 063 064 065 066 067 068 069
          070 071 072 073 074 075 076 077 078 079 080 081 082
          083 084 085 086 087 088 089 090 091 092 093 094 095
          096 097 098 099 101 102 103 104 105 107 108 109 110
          111 112 113 114 115 116 117 118 119 121 122 123 124
          128 129 130 131 132 133 134 135 136 137 138 139 141
          142 144 146 148

The reasons for the failed tests are:

 - 033 - needs adapting to use image opts syntax with blkdebug
         and test image in order to correctly set align property
 - 120 - needs adapting to use correct -drive syntax for luks
 - 140 - needs adapting to use correct -drive syntax for luks
 - 145 - needs adapting to use correct -drive syntax for luks

The vast majority of skipped tests are exercising code that is
qcow2 specific, though a couple could probably be usefully
enabled for luks too.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
---
 tests/qemu-iotests/004       |  2 +-
 tests/qemu-iotests/012       |  2 +-
 tests/qemu-iotests/048       | 22 +++++++++++++++-------
 tests/qemu-iotests/048.out   |  6 ++++--
 tests/qemu-iotests/052       |  4 ++++
 tests/qemu-iotests/052.out   |  4 ++++
 tests/qemu-iotests/100       |  7 +++++++
 tests/qemu-iotests/100.out   | 14 ++++++++++++++
 tests/qemu-iotests/common    |  7 +++++++
 tests/qemu-iotests/common.rc |  3 +++
 10 files changed, 60 insertions(+), 11 deletions(-)
diff mbox

Patch

diff --git a/tests/qemu-iotests/004 b/tests/qemu-iotests/004
index 2ad77ed..bd09437 100755
--- a/tests/qemu-iotests/004
+++ b/tests/qemu-iotests/004
@@ -38,7 +38,7 @@  trap "_cleanup; exit \$status" 0 1 2 3 15
 . ./common.rc
 . ./common.filter
 
-_supported_fmt raw qcow qcow2 qed vdi vmdk vhdx
+_supported_fmt raw qcow qcow2 qed vdi vmdk vhdx luks
 _supported_proto generic
 _supported_os Linux
 
diff --git a/tests/qemu-iotests/012 b/tests/qemu-iotests/012
index 7c5b689..85ed20a 100755
--- a/tests/qemu-iotests/012
+++ b/tests/qemu-iotests/012
@@ -50,7 +50,7 @@  _make_test_img $size
 
 echo
 echo "== mark image read-only"
-chmod a-w "$TEST_IMG"
+chmod a-w "$TEST_IMG_FILE"
 
 echo
 echo "== read from read-only image"
diff --git a/tests/qemu-iotests/048 b/tests/qemu-iotests/048
index e1eeac2..0e58364 100755
--- a/tests/qemu-iotests/048
+++ b/tests/qemu-iotests/048
@@ -31,13 +31,13 @@  _cleanup()
 {
     echo "Cleanup"
     _cleanup_test_img
-    rm "${TEST_IMG2}"
+    rm "${TEST_IMG_FILE2}"
 }
 trap "_cleanup; exit \$status" 0 1 2 3 15
 
 _compare()
 {
-    $QEMU_IMG compare "$@" "$TEST_IMG" "${TEST_IMG2}"
+    $QEMU_IMG compare $QEMU_IMG_EXTRA_ARGS "$@" "$TEST_IMG" "${TEST_IMG2}"
     echo $?
 }
 
@@ -46,25 +46,33 @@  _compare()
 . ./common.filter
 . ./common.pattern
 
-_supported_fmt raw qcow qcow2 qed
+_supported_fmt raw qcow qcow2 qed luks
 _supported_proto file
 _supported_os Linux
 
 # Setup test basic parameters
 TEST_IMG2=$TEST_IMG.2
+TEST_IMG_FILE2=$TEST_IMG_FILE.2
 CLUSTER_SIZE=4096
-size=1024M
+size=128M
 
 _make_test_img $size
 io_pattern write 524288 $CLUSTER_SIZE $CLUSTER_SIZE 4 45
 
 # Compare identical images
-cp "$TEST_IMG" "${TEST_IMG2}"
+cp "$TEST_IMG_FILE" "${TEST_IMG_FILE2}"
 _compare
 _compare -q
 
 # Compare images with different size
-$QEMU_IMG resize -f $IMGFMT "$TEST_IMG" +512M
+if [ "$IMGOPTSSYNTAX" = "true" ]; then
+    $QEMU_IMG resize $QEMU_IMG_EXTRA_ARGS "$TEST_IMG" +32M
+else
+    $QEMU_IMG resize -f $IMGFMT "$TEST_IMG" +32M
+fi
+# Ensure extended space is zero-initialized
+$QEMU_IO "$TEST_IMG" -c "write -P 0 $size 32M" | _filter_qemu_io
+
 _compare
 _compare -s
 
@@ -77,7 +85,7 @@  _compare
 # Test unaligned case of mismatch offsets in allocated clusters
 _make_test_img $size
 io_pattern write 0 512 0 1 100
-cp "$TEST_IMG" "$TEST_IMG2"
+cp "$TEST_IMG_FILE" "$TEST_IMG_FILE2"
 io_pattern write 512 512 0 1 101
 _compare
 
diff --git a/tests/qemu-iotests/048.out b/tests/qemu-iotests/048.out
index 57100dc..0bcf663 100644
--- a/tests/qemu-iotests/048.out
+++ b/tests/qemu-iotests/048.out
@@ -1,5 +1,5 @@ 
 QA output created by 048
-Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1073741824
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
 === IO: pattern 45
 wrote 4096/4096 bytes at offset 524288
 4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -13,6 +13,8 @@  Images are identical.
 0
 0
 Image resized.
+wrote 33554432/33554432 bytes at offset 134217728
+32 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 Warning: Image size mismatch!
 Images are identical.
 0
@@ -28,7 +30,7 @@  wrote 4096/4096 bytes at offset 0
 4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 Content mismatch at offset 0!
 1
-Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1073741824
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
 === IO: pattern 100
 wrote 512/512 bytes at offset 0
 512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
diff --git a/tests/qemu-iotests/052 b/tests/qemu-iotests/052
index 61959e2..d408656 100755
--- a/tests/qemu-iotests/052
+++ b/tests/qemu-iotests/052
@@ -49,6 +49,10 @@  size=128M
 _make_test_img $size
 
 echo
+echo "== initializing whole image =="
+$QEMU_IO -c "write -P 0 0 $size" "$TEST_IMG" | _filter_qemu_io
+
+echo
 echo "== reading whole image =="
 $QEMU_IO -s -c "read 0 $size" "$TEST_IMG" | _filter_qemu_io
 
diff --git a/tests/qemu-iotests/052.out b/tests/qemu-iotests/052.out
index 9dab51c..a377d30 100644
--- a/tests/qemu-iotests/052.out
+++ b/tests/qemu-iotests/052.out
@@ -1,6 +1,10 @@ 
 QA output created by 052
 Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
 
+== initializing whole image ==
+wrote 134217728/134217728 bytes at offset 0
+128 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
 == reading whole image ==
 read 134217728/134217728 bytes at offset 0
 128 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
diff --git a/tests/qemu-iotests/100 b/tests/qemu-iotests/100
index 7c1b235..f548cf8 100755
--- a/tests/qemu-iotests/100
+++ b/tests/qemu-iotests/100
@@ -48,6 +48,7 @@  size=128M
 echo
 echo "== Single request =="
 _make_test_img $size
+$QEMU_IO -c "write -P 0 0 8k" "$TEST_IMG" | _filter_qemu_io
 $QEMU_IO -c "multiwrite 0 4k" "$TEST_IMG" | _filter_qemu_io
 
 echo
@@ -60,6 +61,7 @@  _cleanup_test_img
 echo
 echo "== Sequential requests =="
 _make_test_img $size
+$QEMU_IO -c "write -P 0 0 12k" "$TEST_IMG" | _filter_qemu_io
 $QEMU_IO -c "multiwrite 0 4k ; 4k 4k" "$TEST_IMG" | _filter_qemu_io
 
 echo
@@ -73,6 +75,7 @@  _cleanup_test_img
 echo
 echo "== Superset overlapping requests =="
 _make_test_img $size
+$QEMU_IO -c "write -P 0 0 8k" "$TEST_IMG" | _filter_qemu_io
 $QEMU_IO -c "multiwrite 0 4k ; 1k 2k" "$TEST_IMG" | _filter_qemu_io
 
 echo
@@ -88,6 +91,7 @@  _cleanup_test_img
 echo
 echo "== Subset overlapping requests =="
 _make_test_img $size
+$QEMU_IO -c "write -P 0 0 8k" "$TEST_IMG" | _filter_qemu_io
 $QEMU_IO -c "multiwrite 1k 2k ; 0k 4k" "$TEST_IMG" | _filter_qemu_io
 
 echo
@@ -103,6 +107,7 @@  _cleanup_test_img
 echo
 echo "== Head overlapping requests =="
 _make_test_img $size
+$QEMU_IO -c "write -P 0 0 8k" "$TEST_IMG" | _filter_qemu_io
 $QEMU_IO -c "multiwrite 0k 2k ; 0k 4k" "$TEST_IMG" | _filter_qemu_io
 
 echo
@@ -117,6 +122,7 @@  _cleanup_test_img
 echo
 echo "== Tail overlapping requests =="
 _make_test_img $size
+$QEMU_IO -c "write -P 0 0 8k" "$TEST_IMG" | _filter_qemu_io
 $QEMU_IO -c "multiwrite 2k 2k ; 0k 4k" "$TEST_IMG" | _filter_qemu_io
 
 echo
@@ -131,6 +137,7 @@  _cleanup_test_img
 echo
 echo "== Disjoint requests =="
 _make_test_img $size
+$QEMU_IO -c "write -P 0 0 72k" "$TEST_IMG" | _filter_qemu_io
 $QEMU_IO -c "multiwrite 0 4k ; 64k 4k" "$TEST_IMG" | _filter_qemu_io
 
 echo
diff --git a/tests/qemu-iotests/100.out b/tests/qemu-iotests/100.out
index 0564903..a44cae4 100644
--- a/tests/qemu-iotests/100.out
+++ b/tests/qemu-iotests/100.out
@@ -2,6 +2,8 @@  QA output created by 100
 
 == Single request ==
 Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
+wrote 8192/8192 bytes at offset 0
+8 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 wrote 4096/4096 bytes at offset 0
 4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
@@ -13,6 +15,8 @@  read 4096/4096 bytes at offset 4096
 
 == Sequential requests ==
 Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
+wrote 12288/12288 bytes at offset 0
+12 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 wrote 8192/8192 bytes at offset 0
 8 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
@@ -26,6 +30,8 @@  read 4096/4096 bytes at offset 8192
 
 == Superset overlapping requests ==
 Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
+wrote 8192/8192 bytes at offset 0
+8 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 wrote 6144/6144 bytes at offset 0
 6 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
@@ -39,6 +45,8 @@  read 4096/4096 bytes at offset 4096
 
 == Subset overlapping requests ==
 Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
+wrote 8192/8192 bytes at offset 0
+8 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 wrote 6144/6144 bytes at offset 1024
 6 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
@@ -52,6 +60,8 @@  read 4096/4096 bytes at offset 4096
 
 == Head overlapping requests ==
 Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
+wrote 8192/8192 bytes at offset 0
+8 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 wrote 6144/6144 bytes at offset 0
 6 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
@@ -63,6 +73,8 @@  read 4096/4096 bytes at offset 4096
 
 == Tail overlapping requests ==
 Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
+wrote 8192/8192 bytes at offset 0
+8 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 wrote 6144/6144 bytes at offset 2048
 6 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
@@ -74,6 +86,8 @@  read 4096/4096 bytes at offset 4096
 
 == Disjoint requests ==
 Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
+wrote 73728/73728 bytes at offset 0
+72 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 wrote 8192/8192 bytes at offset 0
 8 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
diff --git a/tests/qemu-iotests/common b/tests/qemu-iotests/common
index 75ca4a7..d86a640 100644
--- a/tests/qemu-iotests/common
+++ b/tests/qemu-iotests/common
@@ -208,6 +208,13 @@  testlist options
             xpand=false
             ;;
 
+        -luks)
+            IMGOPTSSYNTAX=true
+            IMGFMT=luks
+            IMGKEYSECRET=123456
+            xpand=false
+            ;;
+
         -qed)
             IMGFMT=qed
             xpand=false
diff --git a/tests/qemu-iotests/common.rc b/tests/qemu-iotests/common.rc
index 9c0602e..d4b9434 100644
--- a/tests/qemu-iotests/common.rc
+++ b/tests/qemu-iotests/common.rc
@@ -55,6 +55,9 @@  umask 022
 
 if [ "$IMGOPTSSYNTAX" = "true" ]; then
     DRIVER="driver=$IMGFMT"
+    if [ "$IMGFMT" = "luks" ]; then
+        DRIVER="$DRIVER,key-secret=keysec0"
+    fi
     if [ "$IMGPROTO" = "file" ]; then
         TEST_IMG_FILE=$TEST_DIR/t.$IMGFMT
         TEST_IMG="$DRIVER,file.filename=$TEST_DIR/t.$IMGFMT"