@@ -16,5 +16,5 @@ obj-$(CONFIG_STM32F205_SOC) += stm32f205_soc.o
obj-$(CONFIG_XLNX_ZYNQMP) += xlnx-zynqmp.o xlnx-ep108.o
obj-$(CONFIG_FSL_IMX25) += fsl-imx25.o imx25_pdk.o
obj-$(CONFIG_FSL_IMX31) += fsl-imx31.o kzm.o
-obj-$(CONFIG_FSL_IMX6) += fsl-imx6.o
+obj-$(CONFIG_FSL_IMX6) += fsl-imx6.o sabrelite.o
obj-$(CONFIG_ASPEED_SOC) += ast2400.o palmetto-bmc.o
new file mode 100644
@@ -0,0 +1,121 @@
+/*
+ * SABRELITE Board System emulation.
+ *
+ * Copyright (c) 2015 Jean-Christophe Dubois <jcd@tribudubois.net>
+ *
+ * This code is licensed under the GPL, version 2 or later.
+ * See the file `COPYING' in the top level directory.
+ *
+ * It (partially) emulates a sabrelite board, with a Freescale
+ * i.MX6 SoC
+ */
+
+#include "qemu/osdep.h"
+#include "qapi/error.h"
+#include "qemu-common.h"
+#include "hw/arm/fsl-imx6.h"
+#include "hw/boards.h"
+#include "sysemu/sysemu.h"
+#include "qemu/error-report.h"
+#include "sysemu/qtest.h"
+
+typedef struct IMX6Sabrelite {
+ FslIMX6State soc;
+ MemoryRegion ram;
+} IMX6Sabrelite;
+
+static struct arm_boot_info sabrelite_binfo = {
+ /* DDR memory start */
+ .loader_start = FSL_IMX6_MMDC_ADDR,
+ /* No board ID, we boot from DT tree */
+ .board_id = -1,
+};
+
+/* No need to do any particular setup for secondary boot */
+static void sabrelite_write_secondary(ARMCPU *cpu,
+ const struct arm_boot_info *info)
+{
+}
+
+/* Secondary cores are reset through SRC device */
+static void sabrelite_reset_secondary(ARMCPU *cpu,
+ const struct arm_boot_info *info)
+{
+}
+
+static void sabrelite_init(MachineState *machine)
+{
+ IMX6Sabrelite *s = g_new0(IMX6Sabrelite, 1);
+ Error *err = NULL;
+
+ /* Check the amount of memory is compatible with the SOC */
+ if (machine->ram_size > FSL_IMX6_MMDC_SIZE) {
+ error_report("RAM size " RAM_ADDR_FMT " above max supported (%08x)",
+ machine->ram_size, FSL_IMX6_MMDC_SIZE);
+ exit(1);
+ }
+
+ object_initialize(&s->soc, sizeof(s->soc), TYPE_FSL_IMX6);
+ object_property_add_child(OBJECT(machine), "soc", OBJECT(&s->soc),
+ &error_abort);
+
+ object_property_set_bool(OBJECT(&s->soc), true, "realized", &err);
+ if (err != NULL) {
+ error_report("%s", error_get_pretty(err));
+ exit(1);
+ }
+
+ memory_region_allocate_system_memory(&s->ram, NULL, "sabrelite.ram",
+ machine->ram_size);
+ memory_region_add_subregion(get_system_memory(), FSL_IMX6_MMDC_ADDR,
+ &s->ram);
+
+ {
+ /*
+ * TODO: Ideally we would expose the chip select and spi bus on the
+ * SoC object using alias properties; then we would not need to
+ * directly access the underlying spi device object.
+ */
+ /* Add the sst25vf016b NOR FLASH memory to first SPI */
+ Object *spi_dev;
+
+ spi_dev = object_resolve_path_component(OBJECT(&s->soc), "spi1");
+ if (spi_dev) {
+ SSIBus *spi_bus;
+
+ spi_bus = (SSIBus *)qdev_get_child_bus(DEVICE(spi_dev), "spi");
+ if (spi_bus) {
+ DeviceState *flash_dev;
+
+ flash_dev = ssi_create_slave(spi_bus, "sst25vf016b");
+ if (flash_dev) {
+ qemu_irq cs_line = qdev_get_gpio_in_named(flash_dev,
+ SSI_GPIO_CS, 0);
+ sysbus_connect_irq(SYS_BUS_DEVICE(spi_dev), 1, cs_line);
+ }
+ }
+ }
+ }
+
+ sabrelite_binfo.ram_size = machine->ram_size;
+ sabrelite_binfo.kernel_filename = machine->kernel_filename;
+ sabrelite_binfo.kernel_cmdline = machine->kernel_cmdline;
+ sabrelite_binfo.initrd_filename = machine->initrd_filename;
+ sabrelite_binfo.nb_cpus = smp_cpus;
+ sabrelite_binfo.secure_boot = true;
+ sabrelite_binfo.write_secondary_boot = sabrelite_write_secondary;
+ sabrelite_binfo.secondary_cpu_reset_hook = sabrelite_reset_secondary;
+
+ if (!qtest_enabled()) {
+ arm_load_kernel(&s->soc.cpu[0], &sabrelite_binfo);
+ }
+}
+
+static void sabrelite_machine_init(MachineClass *mc)
+{
+ mc->desc = "Freescale i.MX6 Quad SABRE Lite Board (Cortex A9)";
+ mc->init = sabrelite_init;
+ mc->max_cpus = FSL_IMX6_NUM_CPUS;
+}
+
+DEFINE_MACHINE("sabrelite", sabrelite_machine_init)