diff mbox

gt64xxx: access right I/O port when activating byte swapping

Message ID 1463749503-27374-1-git-send-email-hpoussin@reactos.org (mailing list archive)
State New, archived
Headers show

Commit Message

Hervé Poussineau May 20, 2016, 1:05 p.m. UTC
Incidentally, this fixes YAMON on big endian guest.

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
---
 hw/mips/gt64xxx_pci.c | 62 +++++++++++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 60 insertions(+), 2 deletions(-)

Comments

Aurelien Jarno May 20, 2016, 7:56 p.m. UTC | #1
On 2016-05-20 15:05, Hervé Poussineau wrote:
> Incidentally, this fixes YAMON on big endian guest.
> 
> Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
> ---
>  hw/mips/gt64xxx_pci.c | 62 +++++++++++++++++++++++++++++++++++++++++++++++++--
>  1 file changed, 60 insertions(+), 2 deletions(-)
> 
> diff --git a/hw/mips/gt64xxx_pci.c b/hw/mips/gt64xxx_pci.c
> index 3f4523d..c76ee88 100644
> --- a/hw/mips/gt64xxx_pci.c
> +++ b/hw/mips/gt64xxx_pci.c
> @@ -177,6 +177,7 @@
>  
>  /* PCI Internal */
>  #define GT_PCI0_CMD    		(0xc00 >> 2)
> +#define   GT_CMD_MWORDSWAP      (1 << 10)
>  #define GT_PCI0_TOR    		(0xc04 >> 2)
>  #define GT_PCI0_BS_SCS10    	(0xc08 >> 2)
>  #define GT_PCI0_BS_SCS32    	(0xc0c >> 2)
> @@ -294,6 +295,62 @@ static void gt64120_isd_mapping(GT64120State *s)
>      memory_region_add_subregion(get_system_memory(), s->ISD_start, &s->ISD_mem);
>  }
>  
> +static uint64_t gt64120_pci_io_read(void *opaque, hwaddr addr,
> +                                    unsigned int size)
> +{
> +    GT64120State *s = opaque;
> +    uint8_t buf[4];
> +
> +    if (s->regs[GT_PCI0_CMD] & GT_CMD_MWORDSWAP) {

First of all, it should be noted that this bit doesn't control byte
swapping, but swaps the 2 4-byte words in a 8-byte word.

> +        addr = (addr & ~3) + 4 - size - (addr & 3);

This looks complicated, and I don't think it is correct. In addition
this doesn't behave correctly at the edges of the address space. For
example a 2 byte access at address 0x3 would access address
0xffffffffffffffff.

For sizes <= 4, swapping the 2 words should be done with addr ^= 4.
Maybe you should also check for MBYTESWAP which also swaps the bytes
within a 8-byte word.

> +    }
> +
> +    address_space_read(&address_space_io, addr, MEMTXATTRS_UNSPECIFIED,
> +                       buf, size);
> +
> +    if (size == 1) {
> +        return buf[0];
> +    } else if (size == 2) {
> +        return lduw_le_p(buf);
> +    } else if (size == 4) {
> +        return ldl_le_p(buf);
> +    } else {
> +        g_assert_not_reached();
> +    }

The device is configured is little endian, and then the little endian
value converted into native endianness. Wouldn't it be simple to declare
it as DEVICE_NATIVE_ENDIAN?

Aurelien
Hervé Poussineau June 18, 2016, 8:48 p.m. UTC | #2
Hi Aurélien,

Le 20/05/2016 à 21:56, Aurelien Jarno a écrit :
> On 2016-05-20 15:05, Hervé Poussineau wrote:
>> Incidentally, this fixes YAMON on big endian guest.
>>
>> Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
>> ---
>>  hw/mips/gt64xxx_pci.c | 62 +++++++++++++++++++++++++++++++++++++++++++++++++--
>>  1 file changed, 60 insertions(+), 2 deletions(-)
>>
>> diff --git a/hw/mips/gt64xxx_pci.c b/hw/mips/gt64xxx_pci.c
>> index 3f4523d..c76ee88 100644
>> --- a/hw/mips/gt64xxx_pci.c
>> +++ b/hw/mips/gt64xxx_pci.c
>> @@ -177,6 +177,7 @@
>>
>>  /* PCI Internal */
>>  #define GT_PCI0_CMD    		(0xc00 >> 2)
>> +#define   GT_CMD_MWORDSWAP      (1 << 10)
>>  #define GT_PCI0_TOR    		(0xc04 >> 2)
>>  #define GT_PCI0_BS_SCS10    	(0xc08 >> 2)
>>  #define GT_PCI0_BS_SCS32    	(0xc0c >> 2)
>> @@ -294,6 +295,62 @@ static void gt64120_isd_mapping(GT64120State *s)
>>      memory_region_add_subregion(get_system_memory(), s->ISD_start, &s->ISD_mem);
>>  }
>>
>> +static uint64_t gt64120_pci_io_read(void *opaque, hwaddr addr,
>> +                                    unsigned int size)
>> +{
>> +    GT64120State *s = opaque;
>> +    uint8_t buf[4];
>> +
>> +    if (s->regs[GT_PCI0_CMD] & GT_CMD_MWORDSWAP) {
>
> First of all, it should be noted that this bit doesn't control byte
> swapping, but swaps the 2 4-byte words in a 8-byte word.
>
>> +        addr = (addr & ~3) + 4 - size - (addr & 3);
>
> This looks complicated, and I don't think it is correct. In addition
> this doesn't behave correctly at the edges of the address space. For
> example a 2 byte access at address 0x3 would access address
> 0xffffffffffffffff.
>
> For sizes <= 4, swapping the 2 words should be done with addr ^= 4.
> Maybe you should also check for MBYTESWAP which also swaps the bytes
> within a 8-byte word.

The real word problem (ie the one from Yamon) is:
In LE Yamon, there is a read a 0x4d1 (len = 1). MWORDSWAP and MBYTESWAP are disabled
In BE Yamon, the same read is at address 0x4d2. MWORDSWAP is enabled while MBYTESWAP is disabled.

MWORDSWAP documentation is:
"The GT-64120 PCI master swaps the words of the incoming and outgoing PCI data (swap the 2 words of a long word)"

Do we have to ignore it, as QEMU only handles 4-bytes accesses?

Then, how to change this address 0x4d2 to 0x4d1, address where is located the i8259 ELCR register?
Next accesses are for the RTC, at address 0x72 in BE and address 0x71 in LE.
I think I'm missing something.

>
>> +    }
>> +
>> +    address_space_read(&address_space_io, addr, MEMTXATTRS_UNSPECIFIED,
>> +                       buf, size);
>> +
>> +    if (size == 1) {
>> +        return buf[0];
>> +    } else if (size == 2) {
>> +        return lduw_le_p(buf);
>> +    } else if (size == 4) {
>> +        return ldl_le_p(buf);
>> +    } else {
>> +        g_assert_not_reached();
>> +    }
>
> The device is configured is little endian, and then the little endian
> value converted into native endianness. Wouldn't it be simple to declare
> it as DEVICE_NATIVE_ENDIAN?

OK for this part, DEVICE_NATIVE_ENDIAN is indeed better and simplifies code.

Hervé
Aurelien Jarno July 22, 2016, 1:55 p.m. UTC | #3
On 2016-06-18 22:48, Hervé Poussineau wrote:
> Hi Aurélien,
> 
> Le 20/05/2016 à 21:56, Aurelien Jarno a écrit :
> > On 2016-05-20 15:05, Hervé Poussineau wrote:
> > > Incidentally, this fixes YAMON on big endian guest.
> > > 
> > > Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
> > > ---
> > >  hw/mips/gt64xxx_pci.c | 62 +++++++++++++++++++++++++++++++++++++++++++++++++--
> > >  1 file changed, 60 insertions(+), 2 deletions(-)
> > > 
> > > diff --git a/hw/mips/gt64xxx_pci.c b/hw/mips/gt64xxx_pci.c
> > > index 3f4523d..c76ee88 100644
> > > --- a/hw/mips/gt64xxx_pci.c
> > > +++ b/hw/mips/gt64xxx_pci.c
> > > @@ -177,6 +177,7 @@
> > > 
> > >  /* PCI Internal */
> > >  #define GT_PCI0_CMD    		(0xc00 >> 2)
> > > +#define   GT_CMD_MWORDSWAP      (1 << 10)
> > >  #define GT_PCI0_TOR    		(0xc04 >> 2)
> > >  #define GT_PCI0_BS_SCS10    	(0xc08 >> 2)
> > >  #define GT_PCI0_BS_SCS32    	(0xc0c >> 2)
> > > @@ -294,6 +295,62 @@ static void gt64120_isd_mapping(GT64120State *s)
> > >      memory_region_add_subregion(get_system_memory(), s->ISD_start, &s->ISD_mem);
> > >  }
> > > 
> > > +static uint64_t gt64120_pci_io_read(void *opaque, hwaddr addr,
> > > +                                    unsigned int size)
> > > +{
> > > +    GT64120State *s = opaque;
> > > +    uint8_t buf[4];
> > > +
> > > +    if (s->regs[GT_PCI0_CMD] & GT_CMD_MWORDSWAP) {
> > 
> > First of all, it should be noted that this bit doesn't control byte
> > swapping, but swaps the 2 4-byte words in a 8-byte word.
> > 
> > > +        addr = (addr & ~3) + 4 - size - (addr & 3);
> > 
> > This looks complicated, and I don't think it is correct. In addition
> > this doesn't behave correctly at the edges of the address space. For
> > example a 2 byte access at address 0x3 would access address
> > 0xffffffffffffffff.
> > 
> > For sizes <= 4, swapping the 2 words should be done with addr ^= 4.
> > Maybe you should also check for MBYTESWAP which also swaps the bytes
> > within a 8-byte word.
> 
> The real word problem (ie the one from Yamon) is:
> In LE Yamon, there is a read a 0x4d1 (len = 1). MWORDSWAP and MBYTESWAP are disabled
> In BE Yamon, the same read is at address 0x4d2. MWORDSWAP is enabled while MBYTESWAP is disabled.
> 
> MWORDSWAP documentation is:
> "The GT-64120 PCI master swaps the words of the incoming and outgoing PCI data (swap the 2 words of a long word)"
> 
> Do we have to ignore it, as QEMU only handles 4-bytes accesses?

I think indeed that it should be ignored.

> Then, how to change this address 0x4d2 to 0x4d1, address where is located the i8259 ELCR register?
> Next accesses are for the RTC, at address 0x72 in BE and address 0x71 in LE.
> I think I'm missing something.

If you talk about byte accesses, it really looks like a simple byteswap.
0x4d2 ^ 3 = 0x4d1 and 0x72 ^ 3 = 0x71. This could be there is a byteswap
that is missing somewhere. It would be interesting to see how 16-bit and
32-bit accesses are changed between big and little endian.

Aurelien
diff mbox

Patch

diff --git a/hw/mips/gt64xxx_pci.c b/hw/mips/gt64xxx_pci.c
index 3f4523d..c76ee88 100644
--- a/hw/mips/gt64xxx_pci.c
+++ b/hw/mips/gt64xxx_pci.c
@@ -177,6 +177,7 @@ 
 
 /* PCI Internal */
 #define GT_PCI0_CMD    		(0xc00 >> 2)
+#define   GT_CMD_MWORDSWAP      (1 << 10)
 #define GT_PCI0_TOR    		(0xc04 >> 2)
 #define GT_PCI0_BS_SCS10    	(0xc08 >> 2)
 #define GT_PCI0_BS_SCS32    	(0xc0c >> 2)
@@ -294,6 +295,62 @@  static void gt64120_isd_mapping(GT64120State *s)
     memory_region_add_subregion(get_system_memory(), s->ISD_start, &s->ISD_mem);
 }
 
+static uint64_t gt64120_pci_io_read(void *opaque, hwaddr addr,
+                                    unsigned int size)
+{
+    GT64120State *s = opaque;
+    uint8_t buf[4];
+
+    if (s->regs[GT_PCI0_CMD] & GT_CMD_MWORDSWAP) {
+        addr = (addr & ~3) + 4 - size - (addr & 3);
+    }
+
+    address_space_read(&address_space_io, addr, MEMTXATTRS_UNSPECIFIED,
+                       buf, size);
+
+    if (size == 1) {
+        return buf[0];
+    } else if (size == 2) {
+        return lduw_le_p(buf);
+    } else if (size == 4) {
+        return ldl_le_p(buf);
+    } else {
+        g_assert_not_reached();
+    }
+}
+
+static void gt64120_pci_io_write(void *opaque, hwaddr addr, uint64_t data,
+                                 unsigned int size)
+{
+    GT64120State *s = opaque;
+    uint8_t buf[4];
+
+    if (s->regs[GT_PCI0_CMD] & GT_CMD_MWORDSWAP) {
+        addr = (addr & ~3) + 4 - size - (addr & 3);
+    }
+
+    if (size == 1) {
+        buf[0] = data;
+    } else if (size == 2) {
+        stw_le_p(buf, data);
+    } else if (size == 4) {
+        stl_le_p(buf, data);
+    } else {
+        g_assert_not_reached();
+    }
+
+    address_space_write(&address_space_io, addr, MEMTXATTRS_UNSPECIFIED,
+                        buf, size);
+}
+
+static const MemoryRegionOps gt64120_pci_io_ops = {
+    .read = gt64120_pci_io_read,
+    .write = gt64120_pci_io_write,
+    .endianness = DEVICE_LITTLE_ENDIAN,
+    .impl.max_access_size = 4,
+    .valid.unaligned = true,
+};
+
 static void gt64120_pci_mapping(GT64120State *s)
 {
     /* Update PCI0IO mapping */
@@ -308,8 +365,9 @@  static void gt64120_pci_mapping(GT64120State *s)
         s->PCI0IO_length = ((s->regs[GT_PCI0IOHD] + 1) -
                             (s->regs[GT_PCI0IOLD] & 0x7f)) << 21;
         if (s->PCI0IO_length) {
-            memory_region_init_alias(&s->PCI0IO_mem, OBJECT(s), "pci0-io",
-                                     get_system_io(), 0, s->PCI0IO_length);
+            memory_region_init_io(&s->PCI0IO_mem, OBJECT(s),
+                                  &gt64120_pci_io_ops,
+                                  s, "pci0-io", s->PCI0IO_length);
             memory_region_add_subregion(get_system_memory(), s->PCI0IO_start,
                                         &s->PCI0IO_mem);
         }