From patchwork Tue Jun 14 14:14:03 2016 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Peter Maydell X-Patchwork-Id: 9175963 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork.web.codeaurora.org (Postfix) with ESMTP id 72A8560772 for ; Tue, 14 Jun 2016 14:37:11 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 5D34D2793B for ; Tue, 14 Jun 2016 14:37:11 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id 516C2282ED; Tue, 14 Jun 2016 14:37:11 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-6.9 required=2.0 tests=BAYES_00,RCVD_IN_DNSWL_HI autolearn=ham version=3.3.1 Received: from lists.gnu.org (lists.gnu.org [208.118.235.17]) (using TLSv1 with cipher AES256-SHA (256/256 bits)) (No client certificate requested) by mail.wl.linuxfoundation.org (Postfix) with ESMTPS id D53DF2793B for ; Tue, 14 Jun 2016 14:37:08 +0000 (UTC) Received: from localhost ([::1]:35727 helo=lists.gnu.org) by lists.gnu.org with esmtp (Exim 4.71) (envelope-from ) id 1bCpSl-0000AC-Vx for patchwork-qemu-devel@patchwork.kernel.org; Tue, 14 Jun 2016 10:37:08 -0400 Received: from eggs.gnu.org ([2001:4830:134:3::10]:42921) by lists.gnu.org with esmtp (Exim 4.71) (envelope-from ) id 1bCp6o-0003cw-CM for qemu-devel@nongnu.org; Tue, 14 Jun 2016 10:14:31 -0400 Received: from Debian-exim by eggs.gnu.org with spam-scanned (Exim 4.71) (envelope-from ) id 1bCp6j-0008A8-BF for qemu-devel@nongnu.org; Tue, 14 Jun 2016 10:14:26 -0400 Received: from orth.archaic.org.uk ([2001:8b0:1d0::2]:57718) by eggs.gnu.org with esmtp (Exim 4.71) (envelope-from ) id 1bCp6i-00089a-IO for qemu-devel@nongnu.org; Tue, 14 Jun 2016 10:14:21 -0400 Received: from pm215 by orth.archaic.org.uk with local (Exim 4.84_2) (envelope-from ) id 1bCp6h-0006Ip-Ut for qemu-devel@nongnu.org; Tue, 14 Jun 2016 15:14:20 +0100 From: Peter Maydell To: qemu-devel@nongnu.org Date: Tue, 14 Jun 2016 15:14:03 +0100 Message-Id: <1465913645-19346-29-git-send-email-peter.maydell@linaro.org> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1465913645-19346-1-git-send-email-peter.maydell@linaro.org> References: <1465913645-19346-1-git-send-email-peter.maydell@linaro.org> X-detected-operating-system: by eggs.gnu.org: GNU/Linux 2.2.x-3.x [generic] X-Received-From: 2001:8b0:1d0::2 Subject: [Qemu-devel] [PULL 28/30] introduce xlnx-dp X-BeenThere: qemu-devel@nongnu.org X-Mailman-Version: 2.1.21 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: qemu-devel-bounces+patchwork-qemu-devel=patchwork.kernel.org@nongnu.org Sender: "Qemu-devel" X-Virus-Scanned: ClamAV using ClamSMTP From: KONRAD Frederic This is the implementation of the DisplayPort. It has an aux-bus to access dpcd and edid. Graphic plane is connected to the channel 3. Video plane is connected to the channel 0. Audio stream are connected to the channels 4 and 5. Signed-off-by: KONRAD Frederic Tested-By: Hyun Kwon Reviewed-by: Alistair Francis Message-id: 1465833014-21982-9-git-send-email-fred.konrad@greensocs.com Signed-off-by: Peter Maydell --- hw/display/Makefile.objs | 1 + hw/display/xlnx_dp.c | 1336 ++++++++++++++++++++++++++++++++++++++++++ include/hw/display/xlnx_dp.h | 109 ++++ 3 files changed, 1446 insertions(+) create mode 100644 hw/display/xlnx_dp.c create mode 100644 include/hw/display/xlnx_dp.h diff --git a/hw/display/Makefile.objs b/hw/display/Makefile.objs index ddf3275..063889b 100644 --- a/hw/display/Makefile.objs +++ b/hw/display/Makefile.objs @@ -44,3 +44,4 @@ virtio-gpu.o-libs += $(VIRGL_LIBS) virtio-gpu-3d.o-cflags := $(VIRGL_CFLAGS) virtio-gpu-3d.o-libs += $(VIRGL_LIBS) obj-$(CONFIG_DPCD) += dpcd.o +obj-$(CONFIG_XLNX_ZYNQMP) += xlnx_dp.o diff --git a/hw/display/xlnx_dp.c b/hw/display/xlnx_dp.c new file mode 100644 index 0000000..552955f --- /dev/null +++ b/hw/display/xlnx_dp.c @@ -0,0 +1,1336 @@ +/* + * xlnx_dp.c + * + * Copyright (C) 2015 : GreenSocs Ltd + * http://www.greensocs.com/ , email: info@greensocs.com + * + * Developed by : + * Frederic Konrad + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option)any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see . + * + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "hw/display/xlnx_dp.h" + +#ifndef DEBUG_DP +#define DEBUG_DP 0 +#endif + +#define DPRINTF(fmt, ...) do { \ + if (DEBUG_DP) { \ + qemu_log("xlnx_dp: " fmt , ## __VA_ARGS__); \ + } \ +} while (0); + +/* + * Register offset for DP. + */ +#define DP_LINK_BW_SET (0x0000 >> 2) +#define DP_LANE_COUNT_SET (0x0004 >> 2) +#define DP_ENHANCED_FRAME_EN (0x0008 >> 2) +#define DP_TRAINING_PATTERN_SET (0x000C >> 2) +#define DP_LINK_QUAL_PATTERN_SET (0x0010 >> 2) +#define DP_SCRAMBLING_DISABLE (0x0014 >> 2) +#define DP_DOWNSPREAD_CTRL (0x0018 >> 2) +#define DP_SOFTWARE_RESET (0x001C >> 2) +#define DP_TRANSMITTER_ENABLE (0x0080 >> 2) +#define DP_MAIN_STREAM_ENABLE (0x0084 >> 2) +#define DP_FORCE_SCRAMBLER_RESET (0x00C0 >> 2) +#define DP_VERSION_REGISTER (0x00F8 >> 2) +#define DP_CORE_ID (0x00FC >> 2) + +#define DP_AUX_COMMAND_REGISTER (0x0100 >> 2) +#define AUX_ADDR_ONLY_MASK (0x1000) +#define AUX_COMMAND_MASK (0x0F00) +#define AUX_COMMAND_SHIFT (8) +#define AUX_COMMAND_NBYTES (0x000F) + +#define DP_AUX_WRITE_FIFO (0x0104 >> 2) +#define DP_AUX_ADDRESS (0x0108 >> 2) +#define DP_AUX_CLOCK_DIVIDER (0x010C >> 2) +#define DP_TX_USER_FIFO_OVERFLOW (0x0110 >> 2) +#define DP_INTERRUPT_SIGNAL_STATE (0x0130 >> 2) +#define DP_AUX_REPLY_DATA (0x0134 >> 2) +#define DP_AUX_REPLY_CODE (0x0138 >> 2) +#define DP_AUX_REPLY_COUNT (0x013C >> 2) +#define DP_REPLY_DATA_COUNT (0x0148 >> 2) +#define DP_REPLY_STATUS (0x014C >> 2) +#define DP_HPD_DURATION (0x0150 >> 2) +#define DP_MAIN_STREAM_HTOTAL (0x0180 >> 2) +#define DP_MAIN_STREAM_VTOTAL (0x0184 >> 2) +#define DP_MAIN_STREAM_POLARITY (0x0188 >> 2) +#define DP_MAIN_STREAM_HSWIDTH (0x018C >> 2) +#define DP_MAIN_STREAM_VSWIDTH (0x0190 >> 2) +#define DP_MAIN_STREAM_HRES (0x0194 >> 2) +#define DP_MAIN_STREAM_VRES (0x0198 >> 2) +#define DP_MAIN_STREAM_HSTART (0x019C >> 2) +#define DP_MAIN_STREAM_VSTART (0x01A0 >> 2) +#define DP_MAIN_STREAM_MISC0 (0x01A4 >> 2) +#define DP_MAIN_STREAM_MISC1 (0x01A8 >> 2) +#define DP_MAIN_STREAM_M_VID (0x01AC >> 2) +#define DP_MSA_TRANSFER_UNIT_SIZE (0x01B0 >> 2) +#define DP_MAIN_STREAM_N_VID (0x01B4 >> 2) +#define DP_USER_DATA_COUNT_PER_LANE (0x01BC >> 2) +#define DP_MIN_BYTES_PER_TU (0x01C4 >> 2) +#define DP_FRAC_BYTES_PER_TU (0x01C8 >> 2) +#define DP_INIT_WAIT (0x01CC >> 2) +#define DP_PHY_RESET (0x0200 >> 2) +#define DP_PHY_VOLTAGE_DIFF_LANE_0 (0x0220 >> 2) +#define DP_PHY_VOLTAGE_DIFF_LANE_1 (0x0224 >> 2) +#define DP_TRANSMIT_PRBS7 (0x0230 >> 2) +#define DP_PHY_CLOCK_SELECT (0x0234 >> 2) +#define DP_TX_PHY_POWER_DOWN (0x0238 >> 2) +#define DP_PHY_PRECURSOR_LANE_0 (0x023C >> 2) +#define DP_PHY_PRECURSOR_LANE_1 (0x0240 >> 2) +#define DP_PHY_POSTCURSOR_LANE_0 (0x024C >> 2) +#define DP_PHY_POSTCURSOR_LANE_1 (0x0250 >> 2) +#define DP_PHY_STATUS (0x0280 >> 2) + +#define DP_TX_AUDIO_CONTROL (0x0300 >> 2) +#define DP_TX_AUD_CTRL (1) + +#define DP_TX_AUDIO_CHANNELS (0x0304 >> 2) +#define DP_TX_AUDIO_INFO_DATA(n) ((0x0308 + 4 * n) >> 2) +#define DP_TX_M_AUD (0x0328 >> 2) +#define DP_TX_N_AUD (0x032C >> 2) +#define DP_TX_AUDIO_EXT_DATA(n) ((0x0330 + 4 * n) >> 2) +#define DP_INT_STATUS (0x03A0 >> 2) +#define DP_INT_MASK (0x03A4 >> 2) +#define DP_INT_EN (0x03A8 >> 2) +#define DP_INT_DS (0x03AC >> 2) + +/* + * Registers offset for Audio Video Buffer configuration. + */ +#define V_BLEND_OFFSET (0xA000) +#define V_BLEND_BG_CLR_0 (0x0000 >> 2) +#define V_BLEND_BG_CLR_1 (0x0004 >> 2) +#define V_BLEND_BG_CLR_2 (0x0008 >> 2) +#define V_BLEND_SET_GLOBAL_ALPHA_REG (0x000C >> 2) +#define V_BLEND_OUTPUT_VID_FORMAT (0x0014 >> 2) +#define V_BLEND_LAYER0_CONTROL (0x0018 >> 2) +#define V_BLEND_LAYER1_CONTROL (0x001C >> 2) + +#define V_BLEND_RGB2YCBCR_COEFF(n) ((0x0020 + 4 * n) >> 2) +#define V_BLEND_IN1CSC_COEFF(n) ((0x0044 + 4 * n) >> 2) + +#define V_BLEND_LUMA_IN1CSC_OFFSET (0x0068 >> 2) +#define V_BLEND_CR_IN1CSC_OFFSET (0x006C >> 2) +#define V_BLEND_CB_IN1CSC_OFFSET (0x0070 >> 2) +#define V_BLEND_LUMA_OUTCSC_OFFSET (0x0074 >> 2) +#define V_BLEND_CR_OUTCSC_OFFSET (0x0078 >> 2) +#define V_BLEND_CB_OUTCSC_OFFSET (0x007C >> 2) + +#define V_BLEND_IN2CSC_COEFF(n) ((0x0080 + 4 * n) >> 2) + +#define V_BLEND_LUMA_IN2CSC_OFFSET (0x00A4 >> 2) +#define V_BLEND_CR_IN2CSC_OFFSET (0x00A8 >> 2) +#define V_BLEND_CB_IN2CSC_OFFSET (0x00AC >> 2) +#define V_BLEND_CHROMA_KEY_ENABLE (0x01D0 >> 2) +#define V_BLEND_CHROMA_KEY_COMP1 (0x01D4 >> 2) +#define V_BLEND_CHROMA_KEY_COMP2 (0x01D8 >> 2) +#define V_BLEND_CHROMA_KEY_COMP3 (0x01DC >> 2) + +/* + * Registers offset for Audio Video Buffer configuration. + */ +#define AV_BUF_MANAGER_OFFSET (0xB000) +#define AV_BUF_FORMAT (0x0000 >> 2) +#define AV_BUF_NON_LIVE_LATENCY (0x0008 >> 2) +#define AV_CHBUF0 (0x0010 >> 2) +#define AV_CHBUF1 (0x0014 >> 2) +#define AV_CHBUF2 (0x0018 >> 2) +#define AV_CHBUF3 (0x001C >> 2) +#define AV_CHBUF4 (0x0020 >> 2) +#define AV_CHBUF5 (0x0024 >> 2) +#define AV_BUF_STC_CONTROL (0x002C >> 2) +#define AV_BUF_STC_INIT_VALUE0 (0x0030 >> 2) +#define AV_BUF_STC_INIT_VALUE1 (0x0034 >> 2) +#define AV_BUF_STC_ADJ (0x0038 >> 2) +#define AV_BUF_STC_VIDEO_VSYNC_TS_REG0 (0x003C >> 2) +#define AV_BUF_STC_VIDEO_VSYNC_TS_REG1 (0x0040 >> 2) +#define AV_BUF_STC_EXT_VSYNC_TS_REG0 (0x0044 >> 2) +#define AV_BUF_STC_EXT_VSYNC_TS_REG1 (0x0048 >> 2) +#define AV_BUF_STC_CUSTOM_EVENT_TS_REG0 (0x004C >> 2) +#define AV_BUF_STC_CUSTOM_EVENT_TS_REG1 (0x0050 >> 2) +#define AV_BUF_STC_CUSTOM_EVENT2_TS_REG0 (0x0054 >> 2) +#define AV_BUF_STC_CUSTOM_EVENT2_TS_REG1 (0x0058 >> 2) +#define AV_BUF_STC_SNAPSHOT0 (0x0060 >> 2) +#define AV_BUF_STC_SNAPSHOT1 (0x0064 >> 2) +#define AV_BUF_OUTPUT_AUDIO_VIDEO_SELECT (0x0070 >> 2) +#define AV_BUF_HCOUNT_VCOUNT_INT0 (0x0074 >> 2) +#define AV_BUF_HCOUNT_VCOUNT_INT1 (0x0078 >> 2) +#define AV_BUF_DITHER_CONFIG (0x007C >> 2) +#define AV_BUF_DITHER_CONFIG_MAX (0x008C >> 2) +#define AV_BUF_DITHER_CONFIG_MIN (0x0090 >> 2) +#define AV_BUF_PATTERN_GEN_SELECT (0x0100 >> 2) +#define AV_BUF_AUD_VID_CLK_SOURCE (0x0120 >> 2) +#define AV_BUF_SRST_REG (0x0124 >> 2) +#define AV_BUF_AUDIO_RDY_INTERVAL (0x0128 >> 2) +#define AV_BUF_AUDIO_CH_CONFIG (0x012C >> 2) + +#define AV_BUF_GRAPHICS_COMP_SCALE_FACTOR(n)((0x0200 + 4 * n) >> 2) + +#define AV_BUF_VIDEO_COMP_SCALE_FACTOR(n) ((0x020C + 4 * n) >> 2) + +#define AV_BUF_LIVE_VIDEO_COMP_SF(n) ((0x0218 + 4 * n) >> 2) + +#define AV_BUF_LIVE_VID_CONFIG (0x0224 >> 2) + +#define AV_BUF_LIVE_GFX_COMP_SF(n) ((0x0228 + 4 * n) >> 2) + +#define AV_BUF_LIVE_GFX_CONFIG (0x0234 >> 2) + +#define AUDIO_MIXER_REGISTER_OFFSET (0xC000) +#define AUDIO_MIXER_VOLUME_CONTROL (0x0000 >> 2) +#define AUDIO_MIXER_META_DATA (0x0004 >> 2) +#define AUD_CH_STATUS_REG(n) ((0x0008 + 4 * n) >> 2) +#define AUD_CH_A_DATA_REG(n) ((0x0020 + 4 * n) >> 2) +#define AUD_CH_B_DATA_REG(n) ((0x0038 + 4 * n) >> 2) + +#define DP_AUDIO_DMA_CHANNEL(n) (4 + n) +#define DP_GRAPHIC_DMA_CHANNEL (3) +#define DP_VIDEO_DMA_CHANNEL (0) + +enum DPGraphicFmt { + DP_GRAPHIC_RGBA8888 = 0 << 8, + DP_GRAPHIC_ABGR8888 = 1 << 8, + DP_GRAPHIC_RGB888 = 2 << 8, + DP_GRAPHIC_BGR888 = 3 << 8, + DP_GRAPHIC_RGBA5551 = 4 << 8, + DP_GRAPHIC_RGBA4444 = 5 << 8, + DP_GRAPHIC_RGB565 = 6 << 8, + DP_GRAPHIC_8BPP = 7 << 8, + DP_GRAPHIC_4BPP = 8 << 8, + DP_GRAPHIC_2BPP = 9 << 8, + DP_GRAPHIC_1BPP = 10 << 8, + DP_GRAPHIC_MASK = 0xF << 8 +}; + +enum DPVideoFmt { + DP_NL_VID_CB_Y0_CR_Y1 = 0, + DP_NL_VID_CR_Y0_CB_Y1 = 1, + DP_NL_VID_Y0_CR_Y1_CB = 2, + DP_NL_VID_Y0_CB_Y1_CR = 3, + DP_NL_VID_YV16 = 4, + DP_NL_VID_YV24 = 5, + DP_NL_VID_YV16CL = 6, + DP_NL_VID_MONO = 7, + DP_NL_VID_YV16CL2 = 8, + DP_NL_VID_YUV444 = 9, + DP_NL_VID_RGB888 = 10, + DP_NL_VID_RGBA8880 = 11, + DP_NL_VID_RGB888_10BPC = 12, + DP_NL_VID_YUV444_10BPC = 13, + DP_NL_VID_YV16CL2_10BPC = 14, + DP_NL_VID_YV16CL_10BPC = 15, + DP_NL_VID_YV16_10BPC = 16, + DP_NL_VID_YV24_10BPC = 17, + DP_NL_VID_Y_ONLY_10BPC = 18, + DP_NL_VID_YV16_420 = 19, + DP_NL_VID_YV16CL_420 = 20, + DP_NL_VID_YV16CL2_420 = 21, + DP_NL_VID_YV16_420_10BPC = 22, + DP_NL_VID_YV16CL_420_10BPC = 23, + DP_NL_VID_YV16CL2_420_10BPC = 24, + DP_NL_VID_FMT_MASK = 0x1F +}; + +typedef enum DPGraphicFmt DPGraphicFmt; +typedef enum DPVideoFmt DPVideoFmt; + +static const VMStateDescription vmstate_dp = { + .name = TYPE_XLNX_DP, + .version_id = 1, + .fields = (VMStateField[]){ + VMSTATE_UINT32_ARRAY(core_registers, XlnxDPState, + DP_CORE_REG_ARRAY_SIZE), + VMSTATE_UINT32_ARRAY(avbufm_registers, XlnxDPState, + DP_AVBUF_REG_ARRAY_SIZE), + VMSTATE_UINT32_ARRAY(vblend_registers, XlnxDPState, + DP_VBLEND_REG_ARRAY_SIZE), + VMSTATE_UINT32_ARRAY(audio_registers, XlnxDPState, + DP_AUDIO_REG_ARRAY_SIZE), + VMSTATE_END_OF_LIST() + } +}; + +static void xlnx_dp_update_irq(XlnxDPState *s); + +static uint64_t xlnx_dp_audio_read(void *opaque, hwaddr offset, unsigned size) +{ + XlnxDPState *s = XLNX_DP(opaque); + + offset = offset >> 2; + return s->audio_registers[offset]; +} + +static void xlnx_dp_audio_write(void *opaque, hwaddr offset, uint64_t value, + unsigned size) +{ + XlnxDPState *s = XLNX_DP(opaque); + + offset = offset >> 2; + + switch (offset) { + case AUDIO_MIXER_META_DATA: + s->audio_registers[offset] = value & 0x00000001; + break; + default: + s->audio_registers[offset] = value; + break; + } +} + +static const MemoryRegionOps audio_ops = { + .read = xlnx_dp_audio_read, + .write = xlnx_dp_audio_write, + .endianness = DEVICE_NATIVE_ENDIAN, +}; + +static inline uint32_t xlnx_dp_audio_get_volume(XlnxDPState *s, + uint8_t channel) +{ + switch (channel) { + case 0: + return extract32(s->audio_registers[AUDIO_MIXER_VOLUME_CONTROL], 0, 16); + case 1: + return extract32(s->audio_registers[AUDIO_MIXER_VOLUME_CONTROL], 16, + 16); + default: + return 0; + } +} + +static inline void xlnx_dp_audio_activate(XlnxDPState *s) +{ + bool activated = ((s->core_registers[DP_TX_AUDIO_CONTROL] + & DP_TX_AUD_CTRL) != 0); + AUD_set_active_out(s->amixer_output_stream, activated); + xlnx_dpdma_set_host_data_location(s->dpdma, DP_AUDIO_DMA_CHANNEL(0), + &s->audio_buffer_0); + xlnx_dpdma_set_host_data_location(s->dpdma, DP_AUDIO_DMA_CHANNEL(1), + &s->audio_buffer_1); +} + +static inline void xlnx_dp_audio_mix_buffer(XlnxDPState *s) +{ + /* + * Audio packets are signed and have this shape: + * | 16 | 16 | 16 | 16 | 16 | 16 | 16 | 16 | + * | R3 | L3 | R2 | L2 | R1 | L1 | R0 | L0 | + * + * Output audio is 16bits saturated. + */ + int i; + + if ((s->audio_data_available[0]) && (xlnx_dp_audio_get_volume(s, 0))) { + for (i = 0; i < s->audio_data_available[0] / 2; i++) { + s->temp_buffer[i] = (int64_t)(s->audio_buffer_0[i]) + * xlnx_dp_audio_get_volume(s, 0) / 8192; + } + s->byte_left = s->audio_data_available[0]; + } else { + memset(s->temp_buffer, 0, s->audio_data_available[1] / 2); + } + + if ((s->audio_data_available[1]) && (xlnx_dp_audio_get_volume(s, 1))) { + if ((s->audio_data_available[0] == 0) + || (s->audio_data_available[1] == s->audio_data_available[0])) { + for (i = 0; i < s->audio_data_available[1] / 2; i++) { + s->temp_buffer[i] += (int64_t)(s->audio_buffer_1[i]) + * xlnx_dp_audio_get_volume(s, 1) / 8192; + } + s->byte_left = s->audio_data_available[1]; + } + } + + for (i = 0; i < s->byte_left / 2; i++) { + s->out_buffer[i] = MAX(-32767, MIN(s->temp_buffer[i], 32767)); + } + + s->data_ptr = 0; +} + +static void xlnx_dp_audio_callback(void *opaque, int avail) +{ + /* + * Get some data from the DPDMA and compute these datas. + * Then wait for QEMU's audio subsystem to call this callback. + */ + XlnxDPState *s = XLNX_DP(opaque); + size_t written = 0; + + /* If there are already some data don't get more data. */ + if (s->byte_left == 0) { + s->audio_data_available[0] = xlnx_dpdma_start_operation(s->dpdma, 4, + true); + s->audio_data_available[1] = xlnx_dpdma_start_operation(s->dpdma, 5, + true); + xlnx_dp_audio_mix_buffer(s); + } + + /* Send the buffer through the audio. */ + if (s->byte_left <= MAX_QEMU_BUFFER_SIZE) { + if (s->byte_left != 0) { + written = AUD_write(s->amixer_output_stream, + &s->out_buffer[s->data_ptr], s->byte_left); + } else { + /* + * There is nothing to play.. We don't have any data! Fill the + * buffer with zero's and send it. + */ + written = 0; + memset(s->out_buffer, 0, 1024); + AUD_write(s->amixer_output_stream, s->out_buffer, 1024); + } + } else { + written = AUD_write(s->amixer_output_stream, + &s->out_buffer[s->data_ptr], MAX_QEMU_BUFFER_SIZE); + } + s->byte_left -= written; + s->data_ptr += written; +} + +/* + * AUX channel related function. + */ +static void xlnx_dp_aux_clear_rx_fifo(XlnxDPState *s) +{ + fifo8_reset(&s->rx_fifo); +} + +static void xlnx_dp_aux_push_rx_fifo(XlnxDPState *s, uint8_t *buf, size_t len) +{ + DPRINTF("Push %u data in rx_fifo\n", (unsigned)len); + fifo8_push_all(&s->rx_fifo, buf, len); +} + +static uint8_t xlnx_dp_aux_pop_rx_fifo(XlnxDPState *s) +{ + uint8_t ret; + + if (fifo8_is_empty(&s->rx_fifo)) { + DPRINTF("rx_fifo underflow..\n"); + abort(); + } + ret = fifo8_pop(&s->rx_fifo); + DPRINTF("pop 0x%" PRIX8 " from rx_fifo.\n", ret); + return ret; +} + +static void xlnx_dp_aux_clear_tx_fifo(XlnxDPState *s) +{ + fifo8_reset(&s->tx_fifo); +} + +static void xlnx_dp_aux_push_tx_fifo(XlnxDPState *s, uint8_t val, size_t len) +{ + DPRINTF("Push %u data in tx_fifo\n", (unsigned)len); + fifo8_push_all(&s->tx_fifo, &val, len); +} + +static uint8_t xlnx_dp_aux_pop_tx_fifo(XlnxDPState *s) +{ + uint8_t ret; + + if (fifo8_is_empty(&s->tx_fifo)) { + DPRINTF("tx_fifo underflow..\n"); + abort(); + } + ret = fifo8_pop(&s->tx_fifo); + DPRINTF("pop 0x%2.2X from tx_fifo.\n", ret); + return ret; +} + +static uint32_t xlnx_dp_aux_get_address(XlnxDPState *s) +{ + return s->core_registers[DP_AUX_ADDRESS]; +} + +/* + * Get command from the register. + */ +static void xlnx_dp_aux_set_command(XlnxDPState *s, uint32_t value) +{ + bool address_only = (value & AUX_ADDR_ONLY_MASK) != 0; + AUXCommand cmd = (value & AUX_COMMAND_MASK) >> AUX_COMMAND_SHIFT; + uint8_t nbytes = (value & AUX_COMMAND_NBYTES) + 1; + uint8_t buf[16]; + int i; + + /* + * When an address_only command is executed nothing happen to the fifo, so + * just make nbytes = 0. + */ + if (address_only) { + nbytes = 0; + } + + switch (cmd) { + case READ_AUX: + case READ_I2C: + case READ_I2C_MOT: + s->core_registers[DP_AUX_REPLY_CODE] = aux_request(s->aux_bus, cmd, + xlnx_dp_aux_get_address(s), + nbytes, buf); + s->core_registers[DP_REPLY_DATA_COUNT] = nbytes; + + if (s->core_registers[DP_AUX_REPLY_CODE] == AUX_I2C_ACK) { + xlnx_dp_aux_push_rx_fifo(s, buf, nbytes); + } + break; + case WRITE_AUX: + case WRITE_I2C: + case WRITE_I2C_MOT: + for (i = 0; i < nbytes; i++) { + buf[i] = xlnx_dp_aux_pop_tx_fifo(s); + } + s->core_registers[DP_AUX_REPLY_CODE] = aux_request(s->aux_bus, cmd, + xlnx_dp_aux_get_address(s), + nbytes, buf); + xlnx_dp_aux_clear_tx_fifo(s); + break; + case WRITE_I2C_STATUS: + qemu_log_mask(LOG_UNIMP, "xlnx_dp: Write i2c status not implemented\n"); + break; + default: + abort(); + } + + s->core_registers[DP_INTERRUPT_SIGNAL_STATE] |= 0x04; +} + +static void xlnx_dp_set_dpdma(Object *obj, const char *name, Object *val, + Error **errp) +{ + XlnxDPState *s = XLNX_DP(obj); + if (s->console) { + DisplaySurface *surface = qemu_console_surface(s->console); + XlnxDPDMAState *dma = XLNX_DPDMA(val); + xlnx_dpdma_set_host_data_location(dma, DP_GRAPHIC_DMA_CHANNEL, + surface_data(surface)); + } +} + +static inline uint8_t xlnx_dp_global_alpha_value(XlnxDPState *s) +{ + return (s->vblend_registers[V_BLEND_SET_GLOBAL_ALPHA_REG] & 0x1FE) >> 1; +} + +static inline bool xlnx_dp_global_alpha_enabled(XlnxDPState *s) +{ + /* + * If the alpha is totally opaque (255) we consider the alpha is disabled to + * reduce CPU consumption. + */ + return ((xlnx_dp_global_alpha_value(s) != 0xFF) && + ((s->vblend_registers[V_BLEND_SET_GLOBAL_ALPHA_REG] & 0x01) != 0)); +} + +static void xlnx_dp_recreate_surface(XlnxDPState *s) +{ + /* + * Two possibilities, if blending is enabled the console displays + * bout_plane, if not g_plane is displayed. + */ + uint16_t width = s->core_registers[DP_MAIN_STREAM_HRES]; + uint16_t height = s->core_registers[DP_MAIN_STREAM_VRES]; + DisplaySurface *current_console_surface = qemu_console_surface(s->console); + + if ((width != 0) && (height != 0)) { + /* + * As dpy_gfx_replace_surface calls qemu_free_displaysurface on the + * surface we need to be carefull and don't free the surface associated + * to the console or double free will happen. + */ + if (s->bout_plane.surface != current_console_surface) { + qemu_free_displaysurface(s->bout_plane.surface); + } + if (s->v_plane.surface != current_console_surface) { + qemu_free_displaysurface(s->v_plane.surface); + } + if (s->g_plane.surface != current_console_surface) { + qemu_free_displaysurface(s->g_plane.surface); + } + + s->g_plane.surface + = qemu_create_displaysurface_from(width, height, + s->g_plane.format, 0, NULL); + s->v_plane.surface + = qemu_create_displaysurface_from(width, height, + s->v_plane.format, 0, NULL); + if (xlnx_dp_global_alpha_enabled(s)) { + s->bout_plane.surface = + qemu_create_displaysurface_from(width, + height, + s->g_plane.format, + 0, NULL); + dpy_gfx_replace_surface(s->console, s->bout_plane.surface); + } else { + s->bout_plane.surface = NULL; + dpy_gfx_replace_surface(s->console, s->g_plane.surface); + } + + xlnx_dpdma_set_host_data_location(s->dpdma, DP_GRAPHIC_DMA_CHANNEL, + surface_data(s->g_plane.surface)); + xlnx_dpdma_set_host_data_location(s->dpdma, DP_VIDEO_DMA_CHANNEL, + surface_data(s->v_plane.surface)); + } +} + +/* + * Change the graphic format of the surface. + */ +static void xlnx_dp_change_graphic_fmt(XlnxDPState *s) +{ + switch (s->avbufm_registers[AV_BUF_FORMAT] & DP_GRAPHIC_MASK) { + case DP_GRAPHIC_RGBA8888: + s->g_plane.format = PIXMAN_r8g8b8a8; + break; + case DP_GRAPHIC_ABGR8888: + s->g_plane.format = PIXMAN_a8b8g8r8; + break; + case DP_GRAPHIC_RGB565: + s->g_plane.format = PIXMAN_r5g6b5; + break; + case DP_GRAPHIC_RGB888: + s->g_plane.format = PIXMAN_r8g8b8; + break; + case DP_GRAPHIC_BGR888: + s->g_plane.format = PIXMAN_b8g8r8; + break; + default: + DPRINTF("error: unsupported graphic format %u.\n", + s->avbufm_registers[AV_BUF_FORMAT] & DP_GRAPHIC_MASK); + abort(); + } + + switch (s->avbufm_registers[AV_BUF_FORMAT] & DP_NL_VID_FMT_MASK) { + case 0: + s->v_plane.format = PIXMAN_x8b8g8r8; + break; + case DP_NL_VID_RGBA8880: + s->v_plane.format = PIXMAN_x8b8g8r8; + break; + default: + DPRINTF("error: unsupported video format %u.\n", + s->avbufm_registers[AV_BUF_FORMAT] & DP_NL_VID_FMT_MASK); + abort(); + } + + xlnx_dp_recreate_surface(s); +} + +static void xlnx_dp_update_irq(XlnxDPState *s) +{ + uint32_t flags; + + flags = s->core_registers[DP_INT_STATUS] & ~s->core_registers[DP_INT_MASK]; + DPRINTF("update IRQ value = %" PRIx32 "\n", flags); + qemu_set_irq(s->irq, flags != 0); +} + +static uint64_t xlnx_dp_read(void *opaque, hwaddr offset, unsigned size) +{ + XlnxDPState *s = XLNX_DP(opaque); + uint64_t ret = 0; + + offset = offset >> 2; + + switch (offset) { + case DP_TX_USER_FIFO_OVERFLOW: + /* This register is cleared after a read */ + ret = s->core_registers[DP_TX_USER_FIFO_OVERFLOW]; + s->core_registers[DP_TX_USER_FIFO_OVERFLOW] = 0; + break; + case DP_AUX_REPLY_DATA: + ret = xlnx_dp_aux_pop_rx_fifo(s); + break; + case DP_INTERRUPT_SIGNAL_STATE: + /* + * XXX: Not sure it is the right thing to do actually. + * The register is not written by the device driver so it's stuck + * to 0x04. + */ + ret = s->core_registers[DP_INTERRUPT_SIGNAL_STATE]; + s->core_registers[DP_INTERRUPT_SIGNAL_STATE] &= ~0x04; + break; + case DP_AUX_WRITE_FIFO: + case DP_TX_AUDIO_INFO_DATA(0): + case DP_TX_AUDIO_INFO_DATA(1): + case DP_TX_AUDIO_INFO_DATA(2): + case DP_TX_AUDIO_INFO_DATA(3): + case DP_TX_AUDIO_INFO_DATA(4): + case DP_TX_AUDIO_INFO_DATA(5): + case DP_TX_AUDIO_INFO_DATA(6): + case DP_TX_AUDIO_INFO_DATA(7): + case DP_TX_AUDIO_EXT_DATA(0): + case DP_TX_AUDIO_EXT_DATA(1): + case DP_TX_AUDIO_EXT_DATA(2): + case DP_TX_AUDIO_EXT_DATA(3): + case DP_TX_AUDIO_EXT_DATA(4): + case DP_TX_AUDIO_EXT_DATA(5): + case DP_TX_AUDIO_EXT_DATA(6): + case DP_TX_AUDIO_EXT_DATA(7): + case DP_TX_AUDIO_EXT_DATA(8): + /* write only registers */ + ret = 0; + break; + default: + assert(offset <= (0x3AC >> 2)); + ret = s->core_registers[offset]; + break; + } + + DPRINTF("core read @%" PRIx64 " = 0x%8.8lX\n", offset << 2, ret); + return ret; +} + +static void xlnx_dp_write(void *opaque, hwaddr offset, uint64_t value, + unsigned size) +{ + XlnxDPState *s = XLNX_DP(opaque); + + DPRINTF("core write @%" PRIx64 " = 0x%8.8lX\n", offset, value); + + offset = offset >> 2; + + switch (offset) { + /* + * Only special write case are handled. + */ + case DP_LINK_BW_SET: + s->core_registers[offset] = value & 0x000000FF; + break; + case DP_LANE_COUNT_SET: + case DP_MAIN_STREAM_MISC0: + s->core_registers[offset] = value & 0x0000000F; + break; + case DP_TRAINING_PATTERN_SET: + case DP_LINK_QUAL_PATTERN_SET: + case DP_MAIN_STREAM_POLARITY: + case DP_PHY_VOLTAGE_DIFF_LANE_0: + case DP_PHY_VOLTAGE_DIFF_LANE_1: + s->core_registers[offset] = value & 0x00000003; + break; + case DP_ENHANCED_FRAME_EN: + case DP_SCRAMBLING_DISABLE: + case DP_DOWNSPREAD_CTRL: + case DP_MAIN_STREAM_ENABLE: + case DP_TRANSMIT_PRBS7: + s->core_registers[offset] = value & 0x00000001; + break; + case DP_PHY_CLOCK_SELECT: + s->core_registers[offset] = value & 0x00000007; + break; + case DP_SOFTWARE_RESET: + /* + * No need to update this bit as it's read '0'. + */ + /* + * TODO: reset IP. + */ + break; + case DP_TRANSMITTER_ENABLE: + s->core_registers[offset] = value & 0x01; + break; + case DP_FORCE_SCRAMBLER_RESET: + /* + * No need to update this bit as it's read '0'. + */ + /* + * TODO: force a scrambler reset?? + */ + break; + case DP_AUX_COMMAND_REGISTER: + s->core_registers[offset] = value & 0x00001F0F; + xlnx_dp_aux_set_command(s, s->core_registers[offset]); + break; + case DP_MAIN_STREAM_HTOTAL: + case DP_MAIN_STREAM_VTOTAL: + case DP_MAIN_STREAM_HSTART: + case DP_MAIN_STREAM_VSTART: + s->core_registers[offset] = value & 0x0000FFFF; + break; + case DP_MAIN_STREAM_HRES: + case DP_MAIN_STREAM_VRES: + s->core_registers[offset] = value & 0x0000FFFF; + xlnx_dp_recreate_surface(s); + break; + case DP_MAIN_STREAM_HSWIDTH: + case DP_MAIN_STREAM_VSWIDTH: + s->core_registers[offset] = value & 0x00007FFF; + break; + case DP_MAIN_STREAM_MISC1: + s->core_registers[offset] = value & 0x00000086; + break; + case DP_MAIN_STREAM_M_VID: + case DP_MAIN_STREAM_N_VID: + s->core_registers[offset] = value & 0x00FFFFFF; + break; + case DP_MSA_TRANSFER_UNIT_SIZE: + case DP_MIN_BYTES_PER_TU: + case DP_INIT_WAIT: + s->core_registers[offset] = value & 0x00000007; + break; + case DP_USER_DATA_COUNT_PER_LANE: + s->core_registers[offset] = value & 0x0003FFFF; + break; + case DP_FRAC_BYTES_PER_TU: + s->core_registers[offset] = value & 0x000003FF; + break; + case DP_PHY_RESET: + s->core_registers[offset] = value & 0x00010003; + /* + * TODO: Reset something? + */ + break; + case DP_TX_PHY_POWER_DOWN: + s->core_registers[offset] = value & 0x0000000F; + /* + * TODO: Power down things? + */ + break; + case DP_AUX_WRITE_FIFO: + xlnx_dp_aux_push_tx_fifo(s, value, 1); + break; + case DP_AUX_CLOCK_DIVIDER: + break; + case DP_AUX_REPLY_COUNT: + /* + * Writing to this register clear the counter. + */ + s->core_registers[offset] = 0x00000000; + break; + case DP_AUX_ADDRESS: + s->core_registers[offset] = value & 0x000FFFFF; + break; + case DP_VERSION_REGISTER: + case DP_CORE_ID: + case DP_TX_USER_FIFO_OVERFLOW: + case DP_AUX_REPLY_DATA: + case DP_AUX_REPLY_CODE: + case DP_REPLY_DATA_COUNT: + case DP_REPLY_STATUS: + case DP_HPD_DURATION: + /* + * Write to read only location.. + */ + break; + case DP_TX_AUDIO_CONTROL: + s->core_registers[offset] = value & 0x00000001; + xlnx_dp_audio_activate(s); + break; + case DP_TX_AUDIO_CHANNELS: + s->core_registers[offset] = value & 0x00000007; + xlnx_dp_audio_activate(s); + break; + case DP_INT_STATUS: + s->core_registers[DP_INT_STATUS] &= ~value; + xlnx_dp_update_irq(s); + break; + case DP_INT_EN: + s->core_registers[DP_INT_MASK] &= ~value; + xlnx_dp_update_irq(s); + break; + case DP_INT_DS: + s->core_registers[DP_INT_MASK] |= ~value; + xlnx_dp_update_irq(s); + break; + default: + assert(offset <= (0x504C >> 2)); + s->core_registers[offset] = value; + break; + } +} + +static const MemoryRegionOps dp_ops = { + .read = xlnx_dp_read, + .write = xlnx_dp_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid = { + .min_access_size = 4, + .max_access_size = 4, + }, + .impl = { + .min_access_size = 4, + .max_access_size = 4, + }, +}; + +/* + * This is to handle Read/Write to the Video Blender. + */ +static void xlnx_dp_vblend_write(void *opaque, hwaddr offset, + uint64_t value, unsigned size) +{ + XlnxDPState *s = XLNX_DP(opaque); + bool alpha_was_enabled; + + DPRINTF("vblend: write @0x%" HWADDR_PRIX " = 0x%" PRIX32 "\n", offset, + (uint32_t)value); + offset = offset >> 2; + + switch (offset) { + case V_BLEND_BG_CLR_0: + case V_BLEND_BG_CLR_1: + case V_BLEND_BG_CLR_2: + s->vblend_registers[offset] = value & 0x00000FFF; + break; + case V_BLEND_SET_GLOBAL_ALPHA_REG: + /* + * A write to this register can enable or disable blending. Thus we need + * to recreate the surfaces. + */ + alpha_was_enabled = xlnx_dp_global_alpha_enabled(s); + s->vblend_registers[offset] = value & 0x000001FF; + if (xlnx_dp_global_alpha_enabled(s) != alpha_was_enabled) { + xlnx_dp_recreate_surface(s); + } + break; + case V_BLEND_OUTPUT_VID_FORMAT: + s->vblend_registers[offset] = value & 0x00000017; + break; + case V_BLEND_LAYER0_CONTROL: + case V_BLEND_LAYER1_CONTROL: + s->vblend_registers[offset] = value & 0x00000103; + break; + case V_BLEND_RGB2YCBCR_COEFF(0): + case V_BLEND_RGB2YCBCR_COEFF(1): + case V_BLEND_RGB2YCBCR_COEFF(2): + case V_BLEND_RGB2YCBCR_COEFF(3): + case V_BLEND_RGB2YCBCR_COEFF(4): + case V_BLEND_RGB2YCBCR_COEFF(5): + case V_BLEND_RGB2YCBCR_COEFF(6): + case V_BLEND_RGB2YCBCR_COEFF(7): + case V_BLEND_RGB2YCBCR_COEFF(8): + case V_BLEND_IN1CSC_COEFF(0): + case V_BLEND_IN1CSC_COEFF(1): + case V_BLEND_IN1CSC_COEFF(2): + case V_BLEND_IN1CSC_COEFF(3): + case V_BLEND_IN1CSC_COEFF(4): + case V_BLEND_IN1CSC_COEFF(5): + case V_BLEND_IN1CSC_COEFF(6): + case V_BLEND_IN1CSC_COEFF(7): + case V_BLEND_IN1CSC_COEFF(8): + case V_BLEND_IN2CSC_COEFF(0): + case V_BLEND_IN2CSC_COEFF(1): + case V_BLEND_IN2CSC_COEFF(2): + case V_BLEND_IN2CSC_COEFF(3): + case V_BLEND_IN2CSC_COEFF(4): + case V_BLEND_IN2CSC_COEFF(5): + case V_BLEND_IN2CSC_COEFF(6): + case V_BLEND_IN2CSC_COEFF(7): + case V_BLEND_IN2CSC_COEFF(8): + s->vblend_registers[offset] = value & 0x0000FFFF; + break; + case V_BLEND_LUMA_IN1CSC_OFFSET: + case V_BLEND_CR_IN1CSC_OFFSET: + case V_BLEND_CB_IN1CSC_OFFSET: + case V_BLEND_LUMA_IN2CSC_OFFSET: + case V_BLEND_CR_IN2CSC_OFFSET: + case V_BLEND_CB_IN2CSC_OFFSET: + case V_BLEND_LUMA_OUTCSC_OFFSET: + case V_BLEND_CR_OUTCSC_OFFSET: + case V_BLEND_CB_OUTCSC_OFFSET: + s->vblend_registers[offset] = value & 0x3FFF7FFF; + break; + case V_BLEND_CHROMA_KEY_ENABLE: + s->vblend_registers[offset] = value & 0x00000003; + break; + case V_BLEND_CHROMA_KEY_COMP1: + case V_BLEND_CHROMA_KEY_COMP2: + case V_BLEND_CHROMA_KEY_COMP3: + s->vblend_registers[offset] = value & 0x0FFF0FFF; + break; + default: + s->vblend_registers[offset] = value; + break; + } +} + +static uint64_t xlnx_dp_vblend_read(void *opaque, hwaddr offset, + unsigned size) +{ + XlnxDPState *s = XLNX_DP(opaque); + + DPRINTF("vblend: read @0x%" HWADDR_PRIX " = 0x%" PRIX32 "\n", offset, + s->vblend_registers[offset >> 2]); + return s->vblend_registers[offset >> 2]; +} + +static const MemoryRegionOps vblend_ops = { + .read = xlnx_dp_vblend_read, + .write = xlnx_dp_vblend_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid = { + .min_access_size = 4, + .max_access_size = 4, + }, + .impl = { + .min_access_size = 4, + .max_access_size = 4, + }, +}; + +/* + * This is to handle Read/Write to the Audio Video buffer manager. + */ +static void xlnx_dp_avbufm_write(void *opaque, hwaddr offset, uint64_t value, + unsigned size) +{ + XlnxDPState *s = XLNX_DP(opaque); + + DPRINTF("avbufm: write @0x%" HWADDR_PRIX " = 0x%" PRIX32 "\n", offset, + (uint32_t)value); + offset = offset >> 2; + + switch (offset) { + case AV_BUF_FORMAT: + s->avbufm_registers[offset] = value & 0x00000FFF; + xlnx_dp_change_graphic_fmt(s); + break; + case AV_CHBUF0: + case AV_CHBUF1: + case AV_CHBUF2: + case AV_CHBUF3: + case AV_CHBUF4: + case AV_CHBUF5: + s->avbufm_registers[offset] = value & 0x0000007F; + break; + case AV_BUF_OUTPUT_AUDIO_VIDEO_SELECT: + s->avbufm_registers[offset] = value & 0x0000007F; + break; + case AV_BUF_DITHER_CONFIG: + s->avbufm_registers[offset] = value & 0x000007FF; + break; + case AV_BUF_DITHER_CONFIG_MAX: + case AV_BUF_DITHER_CONFIG_MIN: + s->avbufm_registers[offset] = value & 0x00000FFF; + break; + case AV_BUF_PATTERN_GEN_SELECT: + s->avbufm_registers[offset] = value & 0xFFFFFF03; + break; + case AV_BUF_AUD_VID_CLK_SOURCE: + s->avbufm_registers[offset] = value & 0x00000007; + break; + case AV_BUF_SRST_REG: + s->avbufm_registers[offset] = value & 0x00000002; + break; + case AV_BUF_AUDIO_CH_CONFIG: + s->avbufm_registers[offset] = value & 0x00000003; + break; + case AV_BUF_GRAPHICS_COMP_SCALE_FACTOR(0): + case AV_BUF_GRAPHICS_COMP_SCALE_FACTOR(1): + case AV_BUF_GRAPHICS_COMP_SCALE_FACTOR(2): + case AV_BUF_VIDEO_COMP_SCALE_FACTOR(0): + case AV_BUF_VIDEO_COMP_SCALE_FACTOR(1): + case AV_BUF_VIDEO_COMP_SCALE_FACTOR(2): + s->avbufm_registers[offset] = value & 0x0000FFFF; + break; + case AV_BUF_LIVE_VIDEO_COMP_SF(0): + case AV_BUF_LIVE_VIDEO_COMP_SF(1): + case AV_BUF_LIVE_VIDEO_COMP_SF(2): + case AV_BUF_LIVE_VID_CONFIG: + case AV_BUF_LIVE_GFX_COMP_SF(0): + case AV_BUF_LIVE_GFX_COMP_SF(1): + case AV_BUF_LIVE_GFX_COMP_SF(2): + case AV_BUF_LIVE_GFX_CONFIG: + case AV_BUF_NON_LIVE_LATENCY: + case AV_BUF_STC_CONTROL: + case AV_BUF_STC_INIT_VALUE0: + case AV_BUF_STC_INIT_VALUE1: + case AV_BUF_STC_ADJ: + case AV_BUF_STC_VIDEO_VSYNC_TS_REG0: + case AV_BUF_STC_VIDEO_VSYNC_TS_REG1: + case AV_BUF_STC_EXT_VSYNC_TS_REG0: + case AV_BUF_STC_EXT_VSYNC_TS_REG1: + case AV_BUF_STC_CUSTOM_EVENT_TS_REG0: + case AV_BUF_STC_CUSTOM_EVENT_TS_REG1: + case AV_BUF_STC_CUSTOM_EVENT2_TS_REG0: + case AV_BUF_STC_CUSTOM_EVENT2_TS_REG1: + case AV_BUF_STC_SNAPSHOT0: + case AV_BUF_STC_SNAPSHOT1: + case AV_BUF_HCOUNT_VCOUNT_INT0: + case AV_BUF_HCOUNT_VCOUNT_INT1: + qemu_log_mask(LOG_UNIMP, "avbufm: unimplmented"); + break; + default: + s->avbufm_registers[offset] = value; + break; + } +} + +static uint64_t xlnx_dp_avbufm_read(void *opaque, hwaddr offset, + unsigned size) +{ + XlnxDPState *s = XLNX_DP(opaque); + + offset = offset >> 2; + return s->avbufm_registers[offset]; +} + +static const MemoryRegionOps avbufm_ops = { + .read = xlnx_dp_avbufm_read, + .write = xlnx_dp_avbufm_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid = { + .min_access_size = 4, + .max_access_size = 4, + }, + .impl = { + .min_access_size = 4, + .max_access_size = 4, + }, +}; + +/* + * This is a global alpha blending using pixman. + * Both graphic and video planes are multiplied with the global alpha + * coefficient and added. + */ +static inline void xlnx_dp_blend_surface(XlnxDPState *s) +{ + pixman_fixed_t alpha1[] = { pixman_double_to_fixed(1), + pixman_double_to_fixed(1), + pixman_double_to_fixed(1.0) }; + pixman_fixed_t alpha2[] = { pixman_double_to_fixed(1), + pixman_double_to_fixed(1), + pixman_double_to_fixed(1.0) }; + + if ((surface_width(s->g_plane.surface) + != surface_width(s->v_plane.surface)) || + (surface_height(s->g_plane.surface) + != surface_height(s->v_plane.surface))) { + return; + } + + alpha1[2] = pixman_double_to_fixed((double)(xlnx_dp_global_alpha_value(s)) + / 256.0); + alpha2[2] = pixman_double_to_fixed((255.0 + - (double)xlnx_dp_global_alpha_value(s)) + / 256.0); + + pixman_image_set_filter(s->g_plane.surface->image, + PIXMAN_FILTER_CONVOLUTION, alpha1, 3); + pixman_image_composite(PIXMAN_OP_SRC, s->g_plane.surface->image, 0, + s->bout_plane.surface->image, 0, 0, 0, 0, 0, 0, + surface_width(s->g_plane.surface), + surface_height(s->g_plane.surface)); + pixman_image_set_filter(s->v_plane.surface->image, + PIXMAN_FILTER_CONVOLUTION, alpha2, 3); + pixman_image_composite(PIXMAN_OP_ADD, s->v_plane.surface->image, 0, + s->bout_plane.surface->image, 0, 0, 0, 0, 0, 0, + surface_width(s->g_plane.surface), + surface_height(s->g_plane.surface)); +} + +static void xlnx_dp_update_display(void *opaque) +{ + XlnxDPState *s = XLNX_DP(opaque); + + if ((s->core_registers[DP_TRANSMITTER_ENABLE] & 0x01) == 0) { + return; + } + + s->core_registers[DP_INT_STATUS] |= (1 << 13); + xlnx_dp_update_irq(s); + + xlnx_dpdma_trigger_vsync_irq(s->dpdma); + + /* + * Trigger the DMA channel. + */ + if (!xlnx_dpdma_start_operation(s->dpdma, 3, false)) { + /* + * An error occured don't do anything with the data.. + * Trigger an underflow interrupt. + */ + s->core_registers[DP_INT_STATUS] |= (1 << 21); + xlnx_dp_update_irq(s); + return; + } + + if (xlnx_dp_global_alpha_enabled(s)) { + if (!xlnx_dpdma_start_operation(s->dpdma, 0, false)) { + s->core_registers[DP_INT_STATUS] |= (1 << 21); + xlnx_dp_update_irq(s); + return; + } + xlnx_dp_blend_surface(s); + } + + /* + * XXX: We might want to update only what changed. + */ + dpy_gfx_update(s->console, 0, 0, surface_width(s->g_plane.surface), + surface_height(s->g_plane.surface)); +} + +static const GraphicHwOps xlnx_dp_gfx_ops = { + .gfx_update = xlnx_dp_update_display, +}; + +static void xlnx_dp_init(Object *obj) +{ + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + XlnxDPState *s = XLNX_DP(obj); + + memory_region_init(&s->container, obj, TYPE_XLNX_DP, 0xC050); + + memory_region_init_io(&s->core_iomem, obj, &dp_ops, s, TYPE_XLNX_DP + ".core", 0x3AF); + memory_region_add_subregion(&s->container, 0x0000, &s->core_iomem); + + memory_region_init_io(&s->vblend_iomem, obj, &vblend_ops, s, TYPE_XLNX_DP + ".v_blend", 0x1DF); + memory_region_add_subregion(&s->container, 0xA000, &s->vblend_iomem); + + memory_region_init_io(&s->avbufm_iomem, obj, &avbufm_ops, s, TYPE_XLNX_DP + ".av_buffer_manager", 0x238); + memory_region_add_subregion(&s->container, 0xB000, &s->avbufm_iomem); + + memory_region_init_io(&s->audio_iomem, obj, &audio_ops, s, TYPE_XLNX_DP + ".audio", sizeof(s->audio_registers)); + memory_region_add_subregion(&s->container, 0xC000, &s->audio_iomem); + + sysbus_init_mmio(sbd, &s->container); + sysbus_init_irq(sbd, &s->irq); + + object_property_add_link(obj, "dpdma", TYPE_XLNX_DPDMA, + (Object **) &s->dpdma, + xlnx_dp_set_dpdma, + OBJ_PROP_LINK_UNREF_ON_RELEASE, + &error_abort); + + /* + * Initialize AUX Bus. + */ + s->aux_bus = aux_init_bus(DEVICE(obj), "aux"); + + /* + * Initialize DPCD and EDID.. + */ + s->dpcd = DPCD(aux_create_slave(s->aux_bus, "dpcd", 0x00000)); + s->edid = I2CDDC(qdev_create(BUS(aux_get_i2c_bus(s->aux_bus)), "i2c-ddc")); + i2c_set_slave_address(I2C_SLAVE(s->edid), 0x50); + + fifo8_create(&s->rx_fifo, 16); + fifo8_create(&s->tx_fifo, 16); +} + +static void xlnx_dp_realize(DeviceState *dev, Error **errp) +{ + XlnxDPState *s = XLNX_DP(dev); + DisplaySurface *surface; + struct audsettings as; + + s->console = graphic_console_init(dev, 0, &xlnx_dp_gfx_ops, s); + surface = qemu_console_surface(s->console); + xlnx_dpdma_set_host_data_location(s->dpdma, DP_GRAPHIC_DMA_CHANNEL, + surface_data(surface)); + + as.freq = 44100; + as.nchannels = 2; + as.fmt = AUD_FMT_S16; + as.endianness = 0; + + AUD_register_card("xlnx_dp.audio", &s->aud_card); + + s->amixer_output_stream = AUD_open_out(&s->aud_card, + s->amixer_output_stream, + "xlnx_dp.audio.out", + s, + xlnx_dp_audio_callback, + &as); + AUD_set_volume_out(s->amixer_output_stream, 0, 255, 255); + xlnx_dp_audio_activate(s); +} + +static void xlnx_dp_reset(DeviceState *dev) +{ + XlnxDPState *s = XLNX_DP(dev); + + memset(s->core_registers, 0, sizeof(s->core_registers)); + s->core_registers[DP_VERSION_REGISTER] = 0x04010000; + s->core_registers[DP_CORE_ID] = 0x01020000; + s->core_registers[DP_REPLY_STATUS] = 0x00000010; + s->core_registers[DP_MSA_TRANSFER_UNIT_SIZE] = 0x00000040; + s->core_registers[DP_INIT_WAIT] = 0x00000020; + s->core_registers[DP_PHY_RESET] = 0x00010003; + s->core_registers[DP_INT_MASK] = 0xFFFFF03F; + s->core_registers[DP_PHY_STATUS] = 0x00000043; + s->core_registers[DP_INTERRUPT_SIGNAL_STATE] = 0x00000001; + + s->vblend_registers[V_BLEND_RGB2YCBCR_COEFF(0)] = 0x00001000; + s->vblend_registers[V_BLEND_RGB2YCBCR_COEFF(4)] = 0x00001000; + s->vblend_registers[V_BLEND_RGB2YCBCR_COEFF(8)] = 0x00001000; + s->vblend_registers[V_BLEND_IN1CSC_COEFF(0)] = 0x00001000; + s->vblend_registers[V_BLEND_IN1CSC_COEFF(4)] = 0x00001000; + s->vblend_registers[V_BLEND_IN1CSC_COEFF(8)] = 0x00001000; + s->vblend_registers[V_BLEND_IN2CSC_COEFF(0)] = 0x00001000; + s->vblend_registers[V_BLEND_IN2CSC_COEFF(4)] = 0x00001000; + s->vblend_registers[V_BLEND_IN2CSC_COEFF(8)] = 0x00001000; + + s->avbufm_registers[AV_BUF_NON_LIVE_LATENCY] = 0x00000180; + s->avbufm_registers[AV_BUF_OUTPUT_AUDIO_VIDEO_SELECT] = 0x00000008; + s->avbufm_registers[AV_BUF_DITHER_CONFIG_MAX] = 0x00000FFF; + s->avbufm_registers[AV_BUF_GRAPHICS_COMP_SCALE_FACTOR(0)] = 0x00010101; + s->avbufm_registers[AV_BUF_GRAPHICS_COMP_SCALE_FACTOR(1)] = 0x00010101; + s->avbufm_registers[AV_BUF_GRAPHICS_COMP_SCALE_FACTOR(2)] = 0x00010101; + s->avbufm_registers[AV_BUF_VIDEO_COMP_SCALE_FACTOR(0)] = 0x00010101; + s->avbufm_registers[AV_BUF_VIDEO_COMP_SCALE_FACTOR(1)] = 0x00010101; + s->avbufm_registers[AV_BUF_VIDEO_COMP_SCALE_FACTOR(2)] = 0x00010101; + s->avbufm_registers[AV_BUF_LIVE_VIDEO_COMP_SF(0)] = 0x00010101; + s->avbufm_registers[AV_BUF_LIVE_VIDEO_COMP_SF(1)] = 0x00010101; + s->avbufm_registers[AV_BUF_LIVE_VIDEO_COMP_SF(2)] = 0x00010101; + s->avbufm_registers[AV_BUF_LIVE_GFX_COMP_SF(0)] = 0x00010101; + s->avbufm_registers[AV_BUF_LIVE_GFX_COMP_SF(1)] = 0x00010101; + s->avbufm_registers[AV_BUF_LIVE_GFX_COMP_SF(2)] = 0x00010101; + + memset(s->audio_registers, 0, sizeof(s->audio_registers)); + s->byte_left = 0; + + xlnx_dp_aux_clear_rx_fifo(s); + xlnx_dp_change_graphic_fmt(s); + xlnx_dp_update_irq(s); +} + +static void xlnx_dp_class_init(ObjectClass *oc, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(oc); + + dc->realize = xlnx_dp_realize; + dc->vmsd = &vmstate_dp; + dc->reset = xlnx_dp_reset; +} + +static const TypeInfo xlnx_dp_info = { + .name = TYPE_XLNX_DP, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(XlnxDPState), + .instance_init = xlnx_dp_init, + .class_init = xlnx_dp_class_init, +}; + +static void xlnx_dp_register_types(void) +{ + type_register_static(&xlnx_dp_info); +} + +type_init(xlnx_dp_register_types) diff --git a/include/hw/display/xlnx_dp.h b/include/hw/display/xlnx_dp.h new file mode 100644 index 0000000..d3a03f1 --- /dev/null +++ b/include/hw/display/xlnx_dp.h @@ -0,0 +1,109 @@ +/* + * xlnx_dp.h + * + * Copyright (C) 2015 : GreenSocs Ltd + * http://www.greensocs.com/ , email: info@greensocs.com + * + * Developed by : + * Frederic Konrad + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see . + * + */ + +#include "hw/sysbus.h" +#include "ui/console.h" +#include "hw/misc/aux.h" +#include "hw/i2c/i2c.h" +#include "hw/display/dpcd.h" +#include "hw/i2c/i2c-ddc.h" +#include "qemu/fifo8.h" +#include "hw/dma/xlnx_dpdma.h" +#include "audio/audio.h" + +#ifndef XLNX_DP_H +#define XLNX_DP_H + +#define AUD_CHBUF_MAX_DEPTH 32768 +#define MAX_QEMU_BUFFER_SIZE 4096 + +#define DP_CORE_REG_ARRAY_SIZE (0x3AF >> 2) +#define DP_AVBUF_REG_ARRAY_SIZE (0x238 >> 2) +#define DP_VBLEND_REG_ARRAY_SIZE (0x1DF >> 2) +#define DP_AUDIO_REG_ARRAY_SIZE (0x50 >> 2) + +struct PixmanPlane { + pixman_format_code_t format; + DisplaySurface *surface; +}; + +typedef struct XlnxDPState { + /*< private >*/ + SysBusDevice parent_obj; + + /* < public >*/ + MemoryRegion container; + + uint32_t core_registers[DP_CORE_REG_ARRAY_SIZE]; + MemoryRegion core_iomem; + + uint32_t avbufm_registers[DP_AVBUF_REG_ARRAY_SIZE]; + MemoryRegion avbufm_iomem; + + uint32_t vblend_registers[DP_VBLEND_REG_ARRAY_SIZE]; + MemoryRegion vblend_iomem; + + uint32_t audio_registers[DP_AUDIO_REG_ARRAY_SIZE]; + MemoryRegion audio_iomem; + + QemuConsole *console; + + /* + * This is the planes used to display in console. When the blending is + * enabled bout_plane is displayed in console else it's g_plane. + */ + struct PixmanPlane g_plane; + struct PixmanPlane v_plane; + struct PixmanPlane bout_plane; + + QEMUSoundCard aud_card; + SWVoiceOut *amixer_output_stream; + int16_t audio_buffer_0[AUD_CHBUF_MAX_DEPTH]; + int16_t audio_buffer_1[AUD_CHBUF_MAX_DEPTH]; + size_t audio_data_available[2]; + int64_t temp_buffer[AUD_CHBUF_MAX_DEPTH]; + int16_t out_buffer[AUD_CHBUF_MAX_DEPTH]; + size_t byte_left; /* byte available in out_buffer. */ + size_t data_ptr; /* next byte to be sent to QEMU. */ + + /* Associated DPDMA controller. */ + XlnxDPDMAState *dpdma; + + qemu_irq irq; + + AUXBus *aux_bus; + Fifo8 rx_fifo; + Fifo8 tx_fifo; + + /* + * XXX: This should be in an other module. + */ + DPCDState *dpcd; + I2CDDCState *edid; +} XlnxDPState; + +#define TYPE_XLNX_DP "xlnx.v-dp" +#define XLNX_DP(obj) OBJECT_CHECK(XlnxDPState, (obj), TYPE_XLNX_DP) + +#endif /* !XLNX_DP_H */