@@ -17,4 +17,4 @@ obj-$(CONFIG_XLNX_ZYNQMP) += xlnx-zynqmp.o xlnx-ep108.o
obj-$(CONFIG_FSL_IMX25) += fsl-imx25.o imx25_pdk.o
obj-$(CONFIG_FSL_IMX31) += fsl-imx31.o kzm.o
obj-$(CONFIG_FSL_IMX6) += fsl-imx6.o sabrelite.o
-obj-$(CONFIG_ASPEED_SOC) += ast2400.o palmetto-bmc.o
+obj-$(CONFIG_ASPEED_SOC) += ast2400.o aspeed.o
new file mode 100644
@@ -0,0 +1,102 @@
+/*
+ * OpenPOWER Palmetto BMC
+ *
+ * Andrew Jeffery <andrew@aj.id.au>
+ *
+ * Copyright 2016 IBM Corp.
+ *
+ * This code is licensed under the GPL version 2 or later. See
+ * the COPYING file in the top-level directory.
+ */
+
+#include "qemu/osdep.h"
+#include "qapi/error.h"
+#include "qemu-common.h"
+#include "cpu.h"
+#include "exec/address-spaces.h"
+#include "hw/arm/arm.h"
+#include "hw/arm/ast2400.h"
+#include "hw/boards.h"
+#include "qemu/log.h"
+#include "sysemu/block-backend.h"
+#include "sysemu/blockdev.h"
+
+static struct arm_boot_info palmetto_bmc_binfo = {
+ .loader_start = AST2400_SDRAM_BASE,
+ .board_id = 0,
+ .nb_cpus = 1,
+};
+
+typedef struct PalmettoBMCState {
+ AST2400State soc;
+ MemoryRegion ram;
+} PalmettoBMCState;
+
+static void palmetto_bmc_init_flashes(AspeedSMCState *s, const char *flashtype,
+ Error **errp)
+{
+ int i ;
+
+ for (i = 0; i < s->num_cs; ++i) {
+ AspeedSMCFlash *fl = &s->flashes[i];
+ DriveInfo *dinfo = drive_get_next(IF_MTD);
+ qemu_irq cs_line;
+
+ /*
+ * FIXME: check that we are not using a flash module exceeding
+ * the controller segment size
+ */
+ fl->flash = ssi_create_slave_no_init(s->spi, flashtype);
+ if (dinfo) {
+ qdev_prop_set_drive(fl->flash, "drive", blk_by_legacy_dinfo(dinfo),
+ errp);
+ }
+ qdev_init_nofail(fl->flash);
+
+ cs_line = qdev_get_gpio_in_named(fl->flash, SSI_GPIO_CS, 0);
+ sysbus_connect_irq(SYS_BUS_DEVICE(s), i + 1, cs_line);
+ }
+}
+
+static void palmetto_bmc_init(MachineState *machine)
+{
+ PalmettoBMCState *bmc;
+
+ bmc = g_new0(PalmettoBMCState, 1);
+ object_initialize(&bmc->soc, (sizeof(bmc->soc)), TYPE_AST2400);
+ object_property_add_child(OBJECT(machine), "soc", OBJECT(&bmc->soc),
+ &error_abort);
+
+ memory_region_allocate_system_memory(&bmc->ram, NULL, "ram", ram_size);
+ memory_region_add_subregion(get_system_memory(), AST2400_SDRAM_BASE,
+ &bmc->ram);
+ object_property_add_const_link(OBJECT(&bmc->soc), "ram", OBJECT(&bmc->ram),
+ &error_abort);
+ object_property_set_int(OBJECT(&bmc->soc), 0x120CE416, "hw-strap1",
+ &error_abort);
+ object_property_set_bool(OBJECT(&bmc->soc), true, "realized",
+ &error_abort);
+
+ palmetto_bmc_init_flashes(&bmc->soc.smc, "n25q256a", &error_abort);
+ palmetto_bmc_init_flashes(&bmc->soc.spi, "mx25l25635e", &error_abort);
+
+ palmetto_bmc_binfo.kernel_filename = machine->kernel_filename;
+ palmetto_bmc_binfo.initrd_filename = machine->initrd_filename;
+ palmetto_bmc_binfo.kernel_cmdline = machine->kernel_cmdline;
+ palmetto_bmc_binfo.ram_size = ram_size;
+ arm_load_kernel(ARM_CPU(first_cpu), &palmetto_bmc_binfo);
+}
+
+static void palmetto_bmc_machine_init(MachineClass *mc)
+{
+ mc->desc = "OpenPOWER Palmetto BMC";
+ mc->init = palmetto_bmc_init;
+ mc->max_cpus = 1;
+ mc->no_sdcard = 1;
+ mc->no_floppy = 1;
+ mc->no_cdrom = 1;
+ mc->no_sdcard = 1;
+ mc->no_parallel = 1;
+}
+
+DEFINE_MACHINE("palmetto-bmc", palmetto_bmc_machine_init);
deleted file mode 100644
@@ -1,102 +0,0 @@
-/*
- * OpenPOWER Palmetto BMC
- *
- * Andrew Jeffery <andrew@aj.id.au>
- *
- * Copyright 2016 IBM Corp.
- *
- * This code is licensed under the GPL version 2 or later. See
- * the COPYING file in the top-level directory.
- */
-
-#include "qemu/osdep.h"
-#include "qapi/error.h"
-#include "qemu-common.h"
-#include "cpu.h"
-#include "exec/address-spaces.h"
-#include "hw/arm/arm.h"
-#include "hw/arm/ast2400.h"
-#include "hw/boards.h"
-#include "qemu/log.h"
-#include "sysemu/block-backend.h"
-#include "sysemu/blockdev.h"
-
-static struct arm_boot_info palmetto_bmc_binfo = {
- .loader_start = AST2400_SDRAM_BASE,
- .board_id = 0,
- .nb_cpus = 1,
-};
-
-typedef struct PalmettoBMCState {
- AST2400State soc;
- MemoryRegion ram;
-} PalmettoBMCState;
-
-static void palmetto_bmc_init_flashes(AspeedSMCState *s, const char *flashtype,
- Error **errp)
-{
- int i ;
-
- for (i = 0; i < s->num_cs; ++i) {
- AspeedSMCFlash *fl = &s->flashes[i];
- DriveInfo *dinfo = drive_get_next(IF_MTD);
- qemu_irq cs_line;
-
- /*
- * FIXME: check that we are not using a flash module exceeding
- * the controller segment size
- */
- fl->flash = ssi_create_slave_no_init(s->spi, flashtype);
- if (dinfo) {
- qdev_prop_set_drive(fl->flash, "drive", blk_by_legacy_dinfo(dinfo),
- errp);
- }
- qdev_init_nofail(fl->flash);
-
- cs_line = qdev_get_gpio_in_named(fl->flash, SSI_GPIO_CS, 0);
- sysbus_connect_irq(SYS_BUS_DEVICE(s), i + 1, cs_line);
- }
-}
-
-static void palmetto_bmc_init(MachineState *machine)
-{
- PalmettoBMCState *bmc;
-
- bmc = g_new0(PalmettoBMCState, 1);
- object_initialize(&bmc->soc, (sizeof(bmc->soc)), TYPE_AST2400);
- object_property_add_child(OBJECT(machine), "soc", OBJECT(&bmc->soc),
- &error_abort);
-
- memory_region_allocate_system_memory(&bmc->ram, NULL, "ram", ram_size);
- memory_region_add_subregion(get_system_memory(), AST2400_SDRAM_BASE,
- &bmc->ram);
- object_property_add_const_link(OBJECT(&bmc->soc), "ram", OBJECT(&bmc->ram),
- &error_abort);
- object_property_set_int(OBJECT(&bmc->soc), 0x120CE416, "hw-strap1",
- &error_abort);
- object_property_set_bool(OBJECT(&bmc->soc), true, "realized",
- &error_abort);
-
- palmetto_bmc_init_flashes(&bmc->soc.smc, "n25q256a", &error_abort);
- palmetto_bmc_init_flashes(&bmc->soc.spi, "mx25l25635e", &error_abort);
-
- palmetto_bmc_binfo.kernel_filename = machine->kernel_filename;
- palmetto_bmc_binfo.initrd_filename = machine->initrd_filename;
- palmetto_bmc_binfo.kernel_cmdline = machine->kernel_cmdline;
- palmetto_bmc_binfo.ram_size = ram_size;
- arm_load_kernel(ARM_CPU(first_cpu), &palmetto_bmc_binfo);
-}
-
-static void palmetto_bmc_machine_init(MachineClass *mc)
-{
- mc->desc = "OpenPOWER Palmetto BMC";
- mc->init = palmetto_bmc_init;
- mc->max_cpus = 1;
- mc->no_sdcard = 1;
- mc->no_floppy = 1;
- mc->no_cdrom = 1;
- mc->no_sdcard = 1;
- mc->no_parallel = 1;
-}
-
-DEFINE_MACHINE("palmetto-bmc", palmetto_bmc_machine_init);
We plan to add more Aspeed platform to this file. Let's rename it to a more generic name. There are no changes in the code. Signed-off-by: Cédric Le Goater <clg@kaod.org> --- hw/arm/Makefile.objs | 2 +- hw/arm/aspeed.c | 102 ++++++++++++++++++++++++++++++++++++++++++++++++++ hw/arm/palmetto-bmc.c | 102 -------------------------------------------------- 3 files changed, 103 insertions(+), 103 deletions(-) create mode 100644 hw/arm/aspeed.c delete mode 100644 hw/arm/palmetto-bmc.c