diff mbox

scsi-bus: correct responses for INQUIRY and REQUEST SENSE

Message ID 1503049022-14749-1-git-send-email-hare@suse.de (mailing list archive)
State New, archived
Headers show

Commit Message

Hannes Reinecke Aug. 18, 2017, 9:37 a.m. UTC
According to SPC-3 INQUIRY and REQUEST SENSE should return GOOD
even on unsupported LUNS.

Signed-off-by: Hannes Reinecke <hare@suse.com>
---
 hw/scsi/scsi-bus.c | 29 +++++++++++++++++++++++++----
 1 file changed, 25 insertions(+), 4 deletions(-)

Comments

Laszlo Ersek Aug. 18, 2017, 10:55 p.m. UTC | #1
Hello Hannes,

On 08/18/17 11:37, Hannes Reinecke wrote:
> According to SPC-3 INQUIRY and REQUEST SENSE should return GOOD
> even on unsupported LUNS.
> 
> Signed-off-by: Hannes Reinecke <hare@suse.com>
> ---
>  hw/scsi/scsi-bus.c | 29 +++++++++++++++++++++++++----
>  1 file changed, 25 insertions(+), 4 deletions(-)
> 
> diff --git a/hw/scsi/scsi-bus.c b/hw/scsi/scsi-bus.c
> index e364410a23..ade31c11f5 100644
> --- a/hw/scsi/scsi-bus.c
> +++ b/hw/scsi/scsi-bus.c
> @@ -516,8 +516,10 @@ static size_t scsi_sense_len(SCSIRequest *req)
>  static int32_t scsi_target_send_command(SCSIRequest *req, uint8_t *buf)
>  {
>      SCSITargetReq *r = DO_UPCAST(SCSITargetReq, req, req);
> +    int fixed_sense = (req->cmd.buf[1] & 1) == 0;
>  
> -    if (req->lun != 0) {
> +    if (req->lun != 0 &&
> +        buf[0] != INQUIRY && buf[0] != REQUEST_SENSE) {
>          scsi_req_build_sense(req, SENSE_CODE(LUN_NOT_SUPPORTED));
>          scsi_req_complete(req, CHECK_CONDITION);
>          return 0;
> @@ -535,9 +537,28 @@ static int32_t scsi_target_send_command(SCSIRequest *req, uint8_t *buf)
>          break;
>      case REQUEST_SENSE:
>          scsi_target_alloc_buf(&r->req, scsi_sense_len(req));
> -        r->len = scsi_device_get_sense(r->req.dev, r->buf,
> -                                       MIN(req->cmd.xfer, r->buf_len),
> -                                       (req->cmd.buf[1] & 1) == 0);
> +        if (req->lun != 0) {
> +            const struct SCSISense sense = SENSE_CODE(LUN_NOT_SUPPORTED);
> +
> +            if (fixed_sense) {
> +                r->buf[0] = 0x70;
> +                r->buf[2] = sense.key;
> +                r->buf[10] = 10;
> +                r->buf[12] = sense.asc;
> +                r->buf[13] = sense.ascq;
> +                r->len = MIN(req->cmd.xfer, SCSI_SENSE_LEN);
> +            } else {
> +                r->buf[0] = 0x72;
> +                r->buf[1] = sense.key;
> +                r->buf[2] = sense.asc;
> +                r->buf[3] = sense.ascq;
> +                r->len = 8;
> +            }
> +        } else {
> +            r->len = scsi_device_get_sense(r->req.dev, r->buf,
> +                                           MIN(req->cmd.xfer, r->buf_len),
> +                                           fixed_sense);
> +        }
>          if (r->req.dev->sense_is_ua) {
>              scsi_device_unit_attention_reported(req->dev);
>              r->req.dev->sense_len = 0;
> 

thank you for the quick patch.

I've repeated my original testing steps now, in the following scenarios:

                             edk2:ba40cb31b69d  ovmf:ce13d2d8c81f
qemu:v2.10.0-rc3             [1]                [2]
qemu:v2.10.0-rc3+this patch  [3]                [4]

(Edk2 commit ba40cb31b69d was edk2 master just before I pushed my
respective edk2 patches, and edk2 commit ce13d2d8c81f is current edk2
master, with my respective patches.)

[1] FAIL: as reported originally
[2] PASS: my edk2 patches fix ScsiBusDxe (which is justified in itself),
          and then it deals with QEMU post-ded6ddc5a7b9
[3] PASS: this patch of yours makes the reported symptoms vanish even
          without applying my patches to edk2
[4] PASS: your patch works fine with the current (fixed) ScsiBusDxe as
          well, no regressions found.

Tested-by: Laszlo Ersek <lersek@redhat.com>

If you agree, I'd suggest two additional tags for the commit message:

Reported-by: Laszlo Ersek <lersek@redhat.com>
Fixes: ded6ddc5a7b95217557fa360913d1213e12d4a6d

Thanks!
Laszlo
Paolo Bonzini Aug. 22, 2017, 1:20 p.m. UTC | #2
On 19/08/2017 00:55, Laszlo Ersek wrote:
> Reported-by: Laszlo Ersek <lersek@redhat.com>
> Fixes: ded6ddc5a7b95217557fa360913d1213e12d4a6d

And also:

Cc: qemu-stable@nongnu.org


Thanks to both!

Paolo
diff mbox

Patch

diff --git a/hw/scsi/scsi-bus.c b/hw/scsi/scsi-bus.c
index e364410a23..ade31c11f5 100644
--- a/hw/scsi/scsi-bus.c
+++ b/hw/scsi/scsi-bus.c
@@ -516,8 +516,10 @@  static size_t scsi_sense_len(SCSIRequest *req)
 static int32_t scsi_target_send_command(SCSIRequest *req, uint8_t *buf)
 {
     SCSITargetReq *r = DO_UPCAST(SCSITargetReq, req, req);
+    int fixed_sense = (req->cmd.buf[1] & 1) == 0;
 
-    if (req->lun != 0) {
+    if (req->lun != 0 &&
+        buf[0] != INQUIRY && buf[0] != REQUEST_SENSE) {
         scsi_req_build_sense(req, SENSE_CODE(LUN_NOT_SUPPORTED));
         scsi_req_complete(req, CHECK_CONDITION);
         return 0;
@@ -535,9 +537,28 @@  static int32_t scsi_target_send_command(SCSIRequest *req, uint8_t *buf)
         break;
     case REQUEST_SENSE:
         scsi_target_alloc_buf(&r->req, scsi_sense_len(req));
-        r->len = scsi_device_get_sense(r->req.dev, r->buf,
-                                       MIN(req->cmd.xfer, r->buf_len),
-                                       (req->cmd.buf[1] & 1) == 0);
+        if (req->lun != 0) {
+            const struct SCSISense sense = SENSE_CODE(LUN_NOT_SUPPORTED);
+
+            if (fixed_sense) {
+                r->buf[0] = 0x70;
+                r->buf[2] = sense.key;
+                r->buf[10] = 10;
+                r->buf[12] = sense.asc;
+                r->buf[13] = sense.ascq;
+                r->len = MIN(req->cmd.xfer, SCSI_SENSE_LEN);
+            } else {
+                r->buf[0] = 0x72;
+                r->buf[1] = sense.key;
+                r->buf[2] = sense.asc;
+                r->buf[3] = sense.ascq;
+                r->len = 8;
+            }
+        } else {
+            r->len = scsi_device_get_sense(r->req.dev, r->buf,
+                                           MIN(req->cmd.xfer, r->buf_len),
+                                           fixed_sense);
+        }
         if (r->req.dev->sense_is_ua) {
             scsi_device_unit_attention_reported(req->dev);
             r->req.dev->sense_len = 0;