| Message ID | 1506514687-30506-1-git-send-email-amarnath.valluri@intel.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi On Wed, Sep 27, 2017 at 2:18 PM, Amarnath Valluri <amarnath.valluri@intel.com> wrote: > This change introduces a new TPM backend driver that can communicate with > swtpm(software TPM emulator) using unix domain socket interface. QEMU talks to > TPM emulator using QEMU's socket-based chardev backend device. > > Swtpm uses two Unix sockets for communications, one for plain TPM commands and > responses, and one for out-of-band control messages. QEMU passes data socket to > be used over the control channel. > > The swtpm and associated tools can be found here: > https://github.com/stefanberger/swtpm > > The swtpm's control channel protocol specification can be found here: > https://github.com/stefanberger/swtpm/wiki/Control-Channel-Specification > > Usage: > # setup TPM state directory > mkdir /tmp/mytpm > chown -R tss:root /tmp/mytpm > /usr/bin/swtpm_setup --tpm-state /tmp/mytpm --createek > > # Ask qemu to use TPM emulator with given tpm state directory > qemu-system-x86_64 \ > [...] \ > -chardev socket,id=chrtpm,path=/tmp/swtpm-sock \ > -tpmdev emulator,id=tpm0,chardev=chrtpm \ > -device tpm-tis,tpmdev=tpm0 \ > [...] > > Signed-off-by: Amarnath Valluri <amarnath.valluri@intel.com> Apparently you didn't send the whole series this time. Could you resend the whole v9? (this helps with patchew and automated testing) (fwiw, I am working on further cleanups of the tpm code in general, but I think we should merge your series first) Some comments below Thanks > --- > configure | 13 +- > hmp.c | 5 + > hw/tpm/Makefile.objs | 1 + > hw/tpm/tpm_emulator.c | 613 ++++++++++++++++++++++++++++++++++++++++++++++++++ > hw/tpm/tpm_ioctl.h | 246 ++++++++++++++++++++ > qapi/tpm.json | 21 +- > qemu-options.hx | 22 +- > vl.c | 1 + > 8 files changed, 915 insertions(+), 7 deletions(-) > create mode 100644 hw/tpm/tpm_emulator.c > create mode 100644 hw/tpm/tpm_ioctl.h > > diff --git a/configure b/configure > index cb0f7ed..a1b956e 100755 > --- a/configure > +++ b/configure > @@ -3467,6 +3467,12 @@ else > tpm_passthrough=no > fi > > +# TPM emulator is for all posix systems > +if test "$mingw32" != "yes"; then > + tpm_emulator=$tpm > +else > + tpm_emulator=no > +fi > ########################################## > # attr probe > > @@ -5359,6 +5365,7 @@ echo "gcov enabled $gcov" > echo "TPM support $tpm" > echo "libssh2 support $libssh2" > echo "TPM passthrough $tpm_passthrough" > +echo "TPM emulator $tpm_emulator" > echo "QOM debugging $qom_cast_debug" > echo "Live block migration $live_block_migration" > echo "lzo support $lzo" > @@ -5937,12 +5944,16 @@ if test "$live_block_migration" = "yes" ; then > echo "CONFIG_LIVE_BLOCK_MIGRATION=y" >> $config_host_mak > fi > > -# TPM passthrough support? > if test "$tpm" = "yes"; then > echo 'CONFIG_TPM=$(CONFIG_SOFTMMU)' >> $config_host_mak > + # TPM passthrough support? > if test "$tpm_passthrough" = "yes"; then > echo "CONFIG_TPM_PASSTHROUGH=y" >> $config_host_mak > fi > + # TPM emulator support? > + if test "$tpm_emulator" = "yes"; then > + echo "CONFIG_TPM_EMULATOR=y" >> $config_host_mak > + fi > fi > > echo "TRACE_BACKENDS=$trace_backends" >> $config_host_mak > diff --git a/hmp.c b/hmp.c > index 0fb2bc7..9cd8179 100644 > --- a/hmp.c > +++ b/hmp.c > @@ -994,6 +994,7 @@ void hmp_info_tpm(Monitor *mon, const QDict *qdict) > Error *err = NULL; > unsigned int c = 0; > TPMPassthroughOptions *tpo; > + TPMEmulatorOptions *teo; > > info_list = qmp_query_tpm(&err); > if (err) { > @@ -1023,6 +1024,10 @@ void hmp_info_tpm(Monitor *mon, const QDict *qdict) > tpo->has_cancel_path ? ",cancel-path=" : "", > tpo->has_cancel_path ? tpo->cancel_path : ""); > break; > + case TPM_TYPE_OPTIONS_KIND_EMULATOR: > + teo = ti->options->u.emulator.data; > + monitor_printf(mon, ",chardev=%s", teo->chardev); > + break; > case TPM_TYPE_OPTIONS_KIND__MAX: > break; > } > diff --git a/hw/tpm/Makefile.objs b/hw/tpm/Makefile.objs > index 64cecc3..41f0b7a 100644 > --- a/hw/tpm/Makefile.objs > +++ b/hw/tpm/Makefile.objs > @@ -1,2 +1,3 @@ > common-obj-$(CONFIG_TPM_TIS) += tpm_tis.o > common-obj-$(CONFIG_TPM_PASSTHROUGH) += tpm_passthrough.o tpm_util.o > +common-obj-$(CONFIG_TPM_EMULATOR) += tpm_emulator.o tpm_util.o > diff --git a/hw/tpm/tpm_emulator.c b/hw/tpm/tpm_emulator.c > new file mode 100644 > index 0000000..f7ad0a7 > --- /dev/null > +++ b/hw/tpm/tpm_emulator.c > @@ -0,0 +1,613 @@ > +/* > + * Emulator TPM driver > + * > + * Copyright (c) 2017 Intel Corporation > + * Author: Amarnath Valluri <amarnath.valluri@intel.com> > + * > + * Copyright (c) 2010 - 2013 IBM Corporation > + * Authors: > + * Stefan Berger <stefanb@us.ibm.com> > + * > + * Copyright (C) 2011 IAIK, Graz University of Technology > + * Author: Andreas Niederl > + * > + * This library is free software; you can redistribute it and/or > + * modify it under the terms of the GNU Lesser General Public > + * License as published by the Free Software Foundation; either > + * version 2 of the License, or (at your option) any later version. > + * > + * This library is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU > + * Lesser General Public License for more details. > + * > + * You should have received a copy of the GNU Lesser General Public > + * License along with this library; if not, see <http://www.gnu.org/licenses/> > + * > + */ > + > +#include "qemu/osdep.h" > +#include "qemu/error-report.h" > +#include "qemu/sockets.h" > +#include "io/channel-socket.h" > +#include "sysemu/tpm_backend.h" > +#include "tpm_int.h" > +#include "hw/hw.h" > +#include "hw/i386/pc.h" > +#include "tpm_util.h" > +#include "tpm_ioctl.h" > +#include "migration/blocker.h" > +#include "qapi/error.h" > +#include "qapi/clone-visitor.h" > +#include "chardev/char-fe.h" > + > +#include <fcntl.h> > +#include <sys/types.h> > +#include <sys/stat.h> > +#include <stdio.h> > + > +#define DEBUG_TPM 0 > + > +#define DPRINTF(fmt, ...) do { \ > + if (DEBUG_TPM) { \ > + fprintf(stderr, "tpm-emulator:"fmt"\n", ## __VA_ARGS__); \ > + } \ > +} while (0) > + > +#define TYPE_TPM_EMULATOR "tpm-emulator" > +#define TPM_EMULATOR(obj) \ > + OBJECT_CHECK(TPMEmulator, (obj), TYPE_TPM_EMULATOR) > + > +#define TPM_EMULATOR_IMPLEMENTS_ALL_CAPS(S, cap) (((S)->caps & (cap)) == (cap)) > + > +static const TPMDriverOps tpm_emulator_driver; > + > +/* data structures */ > +typedef struct TPMEmulator { > + TPMBackend parent; > + > + TPMEmulatorOptions *options; > + CharBackend ctrl_chr; > + QIOChannel *data_ioc; > + TPMVersion tpm_version; > + ptm_cap caps; /* capabilities of the TPM */ > + uint8_t cur_locty_number; /* last set locality */ > + QemuMutex state_lock; > + Error *migration_blocker; > +} TPMEmulator; > + > + > +static int tpm_emulator_ctrlcmd(CharBackend *dev, unsigned long cmd, void *msg, > + size_t msg_len_in, size_t msg_len_out) > +{ > + uint32_t cmd_no = cpu_to_be32(cmd); > + ssize_t n = sizeof(uint32_t) + msg_len_in; > + uint8_t *buf = NULL; > + > + buf = g_alloca(n); > + memcpy(buf, &cmd_no, sizeof(cmd_no)); > + memcpy(buf + sizeof(cmd_no), msg, msg_len_in); > + > + n = qemu_chr_fe_write_all(dev, buf, n); > + if (n <= 0) { > + return -1; > + } > + > + /* return if no reply expected */ > + if (msg_len_out <= 0) { size_t cannot be < 0 > + return 0; > + } > + > + n = qemu_chr_fe_read_all(dev, msg, msg_len_out); > + if (n < 0) { You probably want to return an error if n == 0 here. > + return -1; > + } > + > + return 0; > +} > + > +static int tpm_emulator_unix_tx_bufs(TPMEmulator *tpm_emu, > + const uint8_t *in, uint32_t in_len, > + uint8_t *out, uint32_t out_len, > + bool *selftest_done) > +{ > + ssize_t ret; > + bool is_selftest = false; > + const struct tpm_resp_hdr *hdr = NULL; > + Error *err = NULL; You better pass the Error as argument to this function, and do error_report() from the caller. > + > + if (selftest_done) { > + *selftest_done = false; > + is_selftest = tpm_util_is_selftest(in, in_len); > + } > + > + ret = qio_channel_write_all(tpm_emu->data_ioc, (char *)in, in_len, &err); > + if (ret != 0) { > + if (err) { You should be able to prepare unconditionally (no need for if err, and error_report) > + error_prepend(&err, "tpm-emulator: error while transmitting data:"); This won't report the error, nor free it > + } else { > + error_report("tpm-emulator: Unknown error while transmitting data"); > + } > + > + goto err_exit; > + } > + > + ret = qio_channel_read(tpm_emu->data_ioc, (char *)out, out_len, &err); > + if (ret < 0) { > + if (err) { same here > + error_prepend(&err, "tpm-emulator: error while reading data:"); > + } else { > + error_report("tpm-emulator: Unknown error while reading data"); > + } > + } else if (ret >= sizeof(*hdr)) { > + hdr = (struct tpm_resp_hdr *)out; > + } > + > + if (!hdr || be32_to_cpu(hdr->len) != ret) { > + error_report("tpm-emulator: received invalid response " > + "packet from TPM with length :%ld", ret); > + ret = -1; > + goto err_exit; > + } > + > + if (is_selftest) { > + *selftest_done = (be32_to_cpu(hdr->errcode) == 0); > + } > + > + return 0; > + > +err_exit: > + if (ret < 0) { > + tpm_util_write_fatal_error_response(out, out_len); > + } > + > + return ret; > +} > + > +static int tpm_emulator_set_locality(TPMEmulator *tpm_emu, uint8_t locty_number) > +{ > + ptm_loc loc; > + > + DPRINTF("%s : locality: 0x%x", __func__, locty_number); > + > + if (tpm_emu->cur_locty_number == locty_number) { > + return 0; > + } > + > + DPRINTF("setting locality : 0x%x", locty_number); > + loc.u.req.loc = locty_number; > + if (tpm_emulator_ctrlcmd(&tpm_emu->ctrl_chr, CMD_SET_LOCALITY, &loc, > + sizeof(loc), sizeof(loc)) < 0) { > + error_report("tpm-emulator: could not set locality : %s", > + strerror(errno)); > + return -1; > + } > + > + loc.u.resp.tpm_result = be32_to_cpu(loc.u.resp.tpm_result); > + if (loc.u.resp.tpm_result != 0) { > + error_report("tpm-emulator: TPM result for set locality : 0x%x", > + loc.u.resp.tpm_result); > + return -1; > + } > + > + tpm_emu->cur_locty_number = locty_number; > + > + return 0; > +} > + > +static void tpm_emulator_handle_request(TPMBackend *tb, TPMBackendCmd cmd) > +{ > + TPMEmulator *tpm_emu = TPM_EMULATOR(tb); > + TPMLocality *locty = NULL; > + bool selftest_done = false; > + > + DPRINTF("processing command type %d", cmd); > + > + switch (cmd) { > + case TPM_BACKEND_CMD_PROCESS_CMD: > + qemu_mutex_lock(&tpm_emu->state_lock); > + locty = tb->tpm_state->locty_data; > + if (tpm_emulator_set_locality(tpm_emu, > + tb->tpm_state->locty_number) < 0) { > + tpm_util_write_fatal_error_response(locty->r_buffer.buffer, > + locty->r_buffer.size); > + } else { > + tpm_emulator_unix_tx_bufs(tpm_emu, locty->w_buffer.buffer, > + locty->w_offset, > + locty->r_buffer.buffer, > + locty->r_buffer.size, > + &selftest_done); > + } > + > + tb->recv_data_callback(tb->tpm_state, tb->tpm_state->locty_number, > + selftest_done); > + qemu_mutex_unlock(&tpm_emu->state_lock); > + > + break; > + case TPM_BACKEND_CMD_INIT: > + case TPM_BACKEND_CMD_END: > + case TPM_BACKEND_CMD_TPM_RESET: > + /* nothing to do */ > + break; > + } > +} > + > +static int tpm_emulator_probe_caps(TPMEmulator *tpm_emu) > +{ > + DPRINTF("%s", __func__); > + if (tpm_emulator_ctrlcmd(&tpm_emu->ctrl_chr, CMD_GET_CAPABILITY, > + &tpm_emu->caps, 0, sizeof(tpm_emu->caps)) < 0) { > + error_report("tpm-emulator: probing failed : %s", strerror(errno)); > + return -1; > + } > + > + tpm_emu->caps = be64_to_cpu(tpm_emu->caps); > + > + DPRINTF("capbilities : 0x%lx", tpm_emu->caps); > + > + return 0; > +} > + > +static int tpm_emulator_check_caps(TPMEmulator *tpm_emu) > +{ > + ptm_cap caps = 0; > + const char *tpm = NULL; > + > + /* check for min. required capabilities */ > + switch (tpm_emu->tpm_version) { > + case TPM_VERSION_1_2: > + caps = PTM_CAP_INIT | PTM_CAP_SHUTDOWN | PTM_CAP_GET_TPMESTABLISHED | > + PTM_CAP_SET_LOCALITY | PTM_CAP_SET_DATAFD; > + tpm = "1.2"; > + break; > + case TPM_VERSION_2_0: > + caps = PTM_CAP_INIT | PTM_CAP_SHUTDOWN | PTM_CAP_GET_TPMESTABLISHED | > + PTM_CAP_SET_LOCALITY | PTM_CAP_RESET_TPMESTABLISHED | > + PTM_CAP_SET_DATAFD; > + tpm = "2"; > + break; > + case TPM_VERSION_UNSPEC: > + error_report("tpm-emulator: TPM version has not been set"); > + return -1; > + } > + > + if (!TPM_EMULATOR_IMPLEMENTS_ALL_CAPS(tpm_emu, caps)) { > + error_report("tpm-emulator: TPM does not implement minimum set of " > + "required capabilities for TPM %s (0x%x)", tpm, (int)caps); > + return -1; > + } > + > + return 0; > +} > + > +static int tpm_emulator_startup_tpm(TPMBackend *tb) > +{ > + TPMEmulator *tpm_emu = TPM_EMULATOR(tb); > + ptm_init init; > + ptm_res res; > + > + DPRINTF("%s", __func__); > + if (tpm_emulator_ctrlcmd(&tpm_emu->ctrl_chr, CMD_INIT, &init, sizeof(init), > + sizeof(init)) < 0) { > + error_report("tpm-emulator: could not send INIT: %s", > + strerror(errno)); > + goto err_exit; > + } > + > + res = be32_to_cpu(init.u.resp.tpm_result); > + if (res) { > + error_report("tpm-emulator: TPM result for CMD_INIT: 0x%x", res); > + goto err_exit; > + } > + return 0; > + > +err_exit: > + return -1; > +} > + > +static bool tpm_emulator_get_tpm_established_flag(TPMBackend *tb) > +{ > + TPMEmulator *tpm_emu = TPM_EMULATOR(tb); > + ptm_est est; > + > + DPRINTF("%s", __func__); > + if (tpm_emulator_ctrlcmd(&tpm_emu->ctrl_chr, CMD_GET_TPMESTABLISHED, &est, > + 0, sizeof(est)) < 0) { > + error_report("tpm-emulator: Could not get the TPM established flag: %s", > + strerror(errno)); > + return false; > + } > + DPRINTF("established flag: %0x", est.u.resp.bit); > + > + return (est.u.resp.bit != 0); > +} > + > +static int tpm_emulator_reset_tpm_established_flag(TPMBackend *tb, > + uint8_t locty) > +{ > + TPMEmulator *tpm_emu = TPM_EMULATOR(tb); > + ptm_reset_est reset_est; > + ptm_res res; > + > + /* only a TPM 2.0 will support this */ > + if (tpm_emu->tpm_version != TPM_VERSION_2_0) { > + return 0; > + } > + > + reset_est.u.req.loc = tpm_emu->cur_locty_number; > + if (tpm_emulator_ctrlcmd(&tpm_emu->ctrl_chr, CMD_RESET_TPMESTABLISHED, > + &reset_est, sizeof(reset_est), > + sizeof(reset_est)) < 0) { > + error_report("tpm-emulator: Could not reset the establishment bit: %s", > + strerror(errno)); > + return -1; > + } > + > + res = be32_to_cpu(reset_est.u.resp.tpm_result); > + if (res) { > + error_report("tpm-emulator: TPM result for rest establixhed flag: 0x%x", > + res); > + return -1; > + } > + > + return 0; > +} > + > +static void tpm_emulator_cancel_cmd(TPMBackend *tb) > +{ > + TPMEmulator *tpm_emu = TPM_EMULATOR(tb); > + ptm_res res; > + > + if (!TPM_EMULATOR_IMPLEMENTS_ALL_CAPS(tpm_emu, PTM_CAP_CANCEL_TPM_CMD)) { > + DPRINTF("Backend does not support CANCEL_TPM_CMD"); > + return; > + } > + > + if (tpm_emulator_ctrlcmd(&tpm_emu->ctrl_chr, CMD_CANCEL_TPM_CMD, &res, 0, > + sizeof(res)) < 0) { > + error_report("tpm-emulator: Could not cancel command: %s", > + strerror(errno)); > + } else if (res != 0) { > + error_report("tpm-emulator: Failed to cancel TPM: 0x%x", > + be32_to_cpu(res)); > + } > +} > + > +static TPMVersion tpm_emulator_get_tpm_version(TPMBackend *tb) > +{ > + TPMEmulator *tpm_emu = TPM_EMULATOR(tb); > + > + return tpm_emu->tpm_version; > +} > + > +static int tpm_emulator_block_migration(TPMEmulator *tpm_emu) > +{ > + Error *err = NULL; > + > + error_setg(&tpm_emu->migration_blocker, > + "Migration disabled: TPM emulator not yet migratable"); > + migrate_add_blocker(tpm_emu->migration_blocker, &err); > + if (err) { > + error_report_err(err); > + error_free(tpm_emu->migration_blocker); > + tpm_emu->migration_blocker = NULL; > + > + return -1; > + } > + > + return 0; > +} > + > +static int tpm_emulator_prepare_data_fd(TPMEmulator *tpm_emu) > +{ > + ptm_res res; > + Error *err = NULL; > + int fds[2] = { -1, -1 }; > + > + if (socketpair(AF_UNIX, SOCK_SEQPACKET, 0, fds) < 0) { > + error_report("tpm-emulator: Failed to create socketpair"); > + return -1; > + } > + > + qemu_chr_fe_set_msgfds(&tpm_emu->ctrl_chr, fds + 1, 1); > + > + if (tpm_emulator_ctrlcmd(&tpm_emu->ctrl_chr, CMD_SET_DATAFD, &res, 0, > + sizeof(res)) || res != 0) { > + error_report("tpm-emulator: Failed to send CMD_SET_DATAFD: %s", > + strerror(errno)); > + goto err_exit; > + } > + > + tpm_emu->data_ioc = QIO_CHANNEL(qio_channel_socket_new_fd(fds[0], &err)); > + if (err) { > + error_prepend(&err, "tpm-emulator: Failed to create io channel: "); > + goto err_exit; > + } > + > + closesocket(fds[1]); > + > + return 0; > + > +err_exit: > + closesocket(fds[0]); > + closesocket(fds[1]); > + return -1; > +} > + > +static int tpm_emulator_handle_device_opts(TPMEmulator *tpm_emu, QemuOpts *opts) > +{ > + const char *value; > + > + value = qemu_opt_get(opts, "chardev"); > + if (value) { > + Error *err = NULL; > + Chardev *dev = qemu_chr_find(value); > + > + if (!dev) { > + error_report("tpm-emulator: tpm chardev '%s' not found.", value); > + goto err; > + } > + > + if (!qemu_chr_fe_init(&tpm_emu->ctrl_chr, dev, &err)) { > + error_prepend(&err, "tpm-emulator: No valid chardev found at '%s':", > + value); > + goto err; > + } > + > + tpm_emu->options->chardev = g_strdup(value); > + } > + > + if (tpm_emulator_prepare_data_fd(tpm_emu) < 0) { > + goto err; > + } > + > + /* FIXME: tpm_util_test_tpmdev() accepts only on socket fd, as it also used > + * by passthrough driver, which not yet using GIOChannel. > + */ > + if (tpm_util_test_tpmdev(QIO_CHANNEL_SOCKET(tpm_emu->data_ioc)->fd, > + &tpm_emu->tpm_version)) { > + error_report("'%s' is not emulating TPM device. Error: %s", > + tpm_emu->options->chardev, strerror(errno)); > + goto err; > + } > + > + DPRINTF("TPM Version %s", tpm_emu->tpm_version == TPM_VERSION_1_2 ? "1.2" : > + (tpm_emu->tpm_version == TPM_VERSION_2_0 ? "2.0" : "Unspecified")); > + > + if (tpm_emulator_probe_caps(tpm_emu) || > + tpm_emulator_check_caps(tpm_emu)) { > + goto err; > + } > + > + return tpm_emulator_block_migration(tpm_emu); > + > +err: > + DPRINTF("Startup error"); > + return -1; > +} > + > +static TPMBackend *tpm_emulator_create(QemuOpts *opts, const char *id) > +{ > + TPMBackend *tb = TPM_BACKEND(object_new(TYPE_TPM_EMULATOR)); > + > + tb->id = g_strdup(id); > + > + if (tpm_emulator_handle_device_opts(TPM_EMULATOR(tb), opts)) { > + goto err_exit; > + } > + > + return tb; > + > +err_exit: > + object_unref(OBJECT(tb)); > + > + return NULL; > +} > + > +static TpmTypeOptions *tpm_emulator_get_tpm_options(TPMBackend *tb) > +{ > + TPMEmulator *tpm_emu = TPM_EMULATOR(tb); > + TpmTypeOptions *options = g_new0(TpmTypeOptions, 1); > + > + options->type = TPM_TYPE_OPTIONS_KIND_EMULATOR; > + options->u.emulator.data = QAPI_CLONE(TPMEmulatorOptions, tpm_emu->options); > + > + return options; > +} > + > +static const QemuOptDesc tpm_emulator_cmdline_opts[] = { > + TPM_STANDARD_CMDLINE_OPTS, > + { > + .name = "chardev", > + .type = QEMU_OPT_STRING, > + .help = "Character device to use for out-of-band control messages", > + }, > + { /* end of list */ }, > +}; > + > +static const TPMDriverOps tpm_emulator_driver = { > + .type = TPM_TYPE_EMULATOR, > + .opts = tpm_emulator_cmdline_opts, > + .desc = "TPM emulator backend driver", > + > + .create = tpm_emulator_create, > + .startup_tpm = tpm_emulator_startup_tpm, > + .cancel_cmd = tpm_emulator_cancel_cmd, > + .get_tpm_established_flag = tpm_emulator_get_tpm_established_flag, > + .reset_tpm_established_flag = tpm_emulator_reset_tpm_established_flag, > + .get_tpm_version = tpm_emulator_get_tpm_version, > + .get_tpm_options = tpm_emulator_get_tpm_options, > +}; > + > +static void tpm_emulator_inst_init(Object *obj) > +{ > + TPMEmulator *tpm_emu = TPM_EMULATOR(obj); > + > + DPRINTF("%s", __func__); > + tpm_emu->options = g_new0(TPMEmulatorOptions, 1); > + tpm_emu->cur_locty_number = ~0; > + qemu_mutex_init(&tpm_emu->state_lock); > +} > + > +/* > + * Gracefully shut down the external TPM > + */ > +static void tpm_emulator_shutdown(TPMEmulator *tpm_emu) > +{ > + ptm_res res; > + > + if (tpm_emulator_ctrlcmd(&tpm_emu->ctrl_chr, CMD_SHUTDOWN, &res, 0, > + sizeof(res)) < 0) { > + error_report("tpm-emulator: Could not cleanly shutdown the TPM: %s", > + strerror(errno)); > + } else if (res != 0) { > + error_report("tpm-emulator: TPM result for sutdown: 0x%x", > + be32_to_cpu(res)); > + } > +} > + > +static void tpm_emulator_inst_finalize(Object *obj) > +{ > + TPMEmulator *tpm_emu = TPM_EMULATOR(obj); > + > + tpm_emulator_shutdown(tpm_emu); > + > + if (tpm_emu->data_ioc) { > + qio_channel_close(tpm_emu->data_ioc, NULL); > + } > + > + qemu_chr_fe_deinit(&tpm_emu->ctrl_chr, false); > + > + if (tpm_emu->options) { > + qapi_free_TPMEmulatorOptions(tpm_emu->options); > + } > + > + if (tpm_emu->migration_blocker) { > + migrate_del_blocker(tpm_emu->migration_blocker); > + error_free(tpm_emu->migration_blocker); > + } > +} > + > +static void tpm_emulator_class_init(ObjectClass *klass, void *data) > +{ > + TPMBackendClass *tbc = TPM_BACKEND_CLASS(klass); > + tbc->ops = &tpm_emulator_driver; > + tbc->handle_request = tpm_emulator_handle_request; > +} > + > +static const TypeInfo tpm_emulator_info = { > + .name = TYPE_TPM_EMULATOR, > + .parent = TYPE_TPM_BACKEND, > + .instance_size = sizeof(TPMEmulator), > + .class_init = tpm_emulator_class_init, > + .instance_init = tpm_emulator_inst_init, > + .instance_finalize = tpm_emulator_inst_finalize, > +}; > + > +static void tpm_emulator_register(void) > +{ > + type_register_static(&tpm_emulator_info); > + tpm_register_driver(&tpm_emulator_driver); > +} > + > +type_init(tpm_emulator_register) > diff --git a/hw/tpm/tpm_ioctl.h b/hw/tpm/tpm_ioctl.h > new file mode 100644 > index 0000000..33564b1 > --- /dev/null > +++ b/hw/tpm/tpm_ioctl.h > @@ -0,0 +1,246 @@ > +/* > + * tpm_ioctl.h > + * > + * (c) Copyright IBM Corporation 2014, 2015. > + * > + * This file is licensed under the terms of the 3-clause BSD license > + */ > +#ifndef _TPM_IOCTL_H_ > +#define _TPM_IOCTL_H_ > + > +#include <stdint.h> > +#include <sys/uio.h> > +#include <sys/types.h> > +#include <sys/ioctl.h> > + > +/* > + * Every response from a command involving a TPM command execution must hold > + * the ptm_res as the first element. > + * ptm_res corresponds to the error code of a command executed by the TPM. > + */ > + > +typedef uint32_t ptm_res; > + > +/* PTM_GET_TPMESTABLISHED: get the establishment bit */ > +struct ptm_est { > + union { > + struct { > + ptm_res tpm_result; > + unsigned char bit; /* TPM established bit */ > + } resp; /* response */ > + } u; > +}; > + > +/* PTM_RESET_TPMESTABLISHED: reset establishment bit */ > +struct ptm_reset_est { > + union { > + struct { > + uint8_t loc; /* locality to use */ > + } req; /* request */ > + struct { > + ptm_res tpm_result; > + } resp; /* response */ > + } u; > +}; > + > +/* PTM_INIT */ > +struct ptm_init { > + union { > + struct { > + uint32_t init_flags; /* see definitions below */ > + } req; /* request */ > + struct { > + ptm_res tpm_result; > + } resp; /* response */ > + } u; > +}; > + > +/* above init_flags */ > +#define PTM_INIT_FLAG_DELETE_VOLATILE (1 << 0) > + /* delete volatile state file after reading it */ > + > +/* PTM_SET_LOCALITY */ > +struct ptm_loc { > + union { > + struct { > + uint8_t loc; /* locality to set */ > + } req; /* request */ > + struct { > + ptm_res tpm_result; > + } resp; /* response */ > + } u; > +}; > + > +/* PTM_HASH_DATA: hash given data */ > +struct ptm_hdata { > + union { > + struct { > + uint32_t length; > + uint8_t data[4096]; > + } req; /* request */ > + struct { > + ptm_res tpm_result; > + } resp; /* response */ > + } u; > +}; > + > +/* > + * size of the TPM state blob to transfer; x86_64 can handle 8k, > + * ppc64le only ~7k; keep the response below a 4k page size > + */ > +#define PTM_STATE_BLOB_SIZE (3 * 1024) > + > +/* > + * The following is the data structure to get state blobs from the TPM. > + * If the size of the state blob exceeds the PTM_STATE_BLOB_SIZE, multiple reads > + * with this ioctl and with adjusted offset are necessary. All bytes > + * must be transferred and the transfer is done once the last byte has been > + * returned. > + * It is possible to use the read() interface for reading the data; however, the > + * first bytes of the state blob will be part of the response to the ioctl(); a > + * subsequent read() is only necessary if the total length (totlength) exceeds > + * the number of received bytes. seek() is not supported. > + */ > +struct ptm_getstate { > + union { > + struct { > + uint32_t state_flags; /* may be: PTM_STATE_FLAG_DECRYPTED */ > + uint32_t type; /* which blob to pull */ > + uint32_t offset; /* offset from where to read */ > + } req; /* request */ > + struct { > + ptm_res tpm_result; > + uint32_t state_flags; /* may be: PTM_STATE_FLAG_ENCRYPTED */ > + uint32_t totlength; /* total length that will be transferred */ > + uint32_t length; /* number of bytes in following buffer */ > + uint8_t data[PTM_STATE_BLOB_SIZE]; > + } resp; /* response */ > + } u; > +}; > + > +/* TPM state blob types */ > +#define PTM_BLOB_TYPE_PERMANENT 1 > +#define PTM_BLOB_TYPE_VOLATILE 2 > +#define PTM_BLOB_TYPE_SAVESTATE 3 > + > +/* state_flags above : */ > +#define PTM_STATE_FLAG_DECRYPTED 1 /* on input: get decrypted state */ > +#define PTM_STATE_FLAG_ENCRYPTED 2 /* on output: state is encrypted */ > + > +/* > + * The following is the data structure to set state blobs in the TPM. > + * If the size of the state blob exceeds the PTM_STATE_BLOB_SIZE, multiple > + * 'writes' using this ioctl are necessary. The last packet is indicated > + * by the length being smaller than the PTM_STATE_BLOB_SIZE. > + * The very first packet may have a length indicator of '0' enabling > + * a write() with all the bytes from a buffer. If the write() interface > + * is used, a final ioctl with a non-full buffer must be made to indicate > + * that all data were transferred (a write with 0 bytes would not work). > + */ > +struct ptm_setstate { > + union { > + struct { > + uint32_t state_flags; /* may be PTM_STATE_FLAG_ENCRYPTED */ > + uint32_t type; /* which blob to set */ > + uint32_t length; /* length of the data; > + use 0 on the first packet to > + transfer using write() */ > + uint8_t data[PTM_STATE_BLOB_SIZE]; > + } req; /* request */ > + struct { > + ptm_res tpm_result; > + } resp; /* response */ > + } u; > +}; > + > +/* > + * PTM_GET_CONFIG: Data structure to get runtime configuration information > + * such as which keys are applied. > + */ > +struct ptm_getconfig { > + union { > + struct { > + ptm_res tpm_result; > + uint32_t flags; > + } resp; /* response */ > + } u; > +}; > + > +#define PTM_CONFIG_FLAG_FILE_KEY 0x1 > +#define PTM_CONFIG_FLAG_MIGRATION_KEY 0x2 > + > + > +typedef uint64_t ptm_cap; > +typedef struct ptm_est ptm_est; > +typedef struct ptm_reset_est ptm_reset_est; > +typedef struct ptm_loc ptm_loc; > +typedef struct ptm_hdata ptm_hdata; > +typedef struct ptm_init ptm_init; > +typedef struct ptm_getstate ptm_getstate; > +typedef struct ptm_setstate ptm_setstate; > +typedef struct ptm_getconfig ptm_getconfig; > + > +/* capability flags returned by PTM_GET_CAPABILITY */ > +#define PTM_CAP_INIT (1) > +#define PTM_CAP_SHUTDOWN (1 << 1) > +#define PTM_CAP_GET_TPMESTABLISHED (1 << 2) > +#define PTM_CAP_SET_LOCALITY (1 << 3) > +#define PTM_CAP_HASHING (1 << 4) > +#define PTM_CAP_CANCEL_TPM_CMD (1 << 5) > +#define PTM_CAP_STORE_VOLATILE (1 << 6) > +#define PTM_CAP_RESET_TPMESTABLISHED (1 << 7) > +#define PTM_CAP_GET_STATEBLOB (1 << 8) > +#define PTM_CAP_SET_STATEBLOB (1 << 9) > +#define PTM_CAP_STOP (1 << 10) > +#define PTM_CAP_GET_CONFIG (1 << 11) > +#define PTM_CAP_SET_DATAFD (1 << 12) > + > +enum { > + PTM_GET_CAPABILITY = _IOR('P', 0, ptm_cap), > + PTM_INIT = _IOWR('P', 1, ptm_init), > + PTM_SHUTDOWN = _IOR('P', 2, ptm_res), > + PTM_GET_TPMESTABLISHED = _IOR('P', 3, ptm_est), > + PTM_SET_LOCALITY = _IOWR('P', 4, ptm_loc), > + PTM_HASH_START = _IOR('P', 5, ptm_res), > + PTM_HASH_DATA = _IOWR('P', 6, ptm_hdata), > + PTM_HASH_END = _IOR('P', 7, ptm_res), > + PTM_CANCEL_TPM_CMD = _IOR('P', 8, ptm_res), > + PTM_STORE_VOLATILE = _IOR('P', 9, ptm_res), > + PTM_RESET_TPMESTABLISHED = _IOWR('P', 10, ptm_reset_est), > + PTM_GET_STATEBLOB = _IOWR('P', 11, ptm_getstate), > + PTM_SET_STATEBLOB = _IOWR('P', 12, ptm_setstate), > + PTM_STOP = _IOR('P', 13, ptm_res), > + PTM_GET_CONFIG = _IOR('P', 14, ptm_getconfig), > + PTM_SET_DATAFD = _IOR('P', 15, ptm_res), > +}; > + > +/* > + * Commands used by the non-CUSE TPMs > + * > + * All messages container big-endian data. > + * > + * The return messages only contain the 'resp' part of the unions > + * in the data structures above. Besides that the limits in the > + * buffers above (ptm_hdata:u.req.data and ptm_get_state:u.resp.data > + * and ptm_set_state:u.req.data) are 0xffffffff. > + */ > +enum { > + CMD_GET_CAPABILITY = 1, > + CMD_INIT, > + CMD_SHUTDOWN, > + CMD_GET_TPMESTABLISHED, > + CMD_SET_LOCALITY, > + CMD_HASH_START, > + CMD_HASH_DATA, > + CMD_HASH_END, > + CMD_CANCEL_TPM_CMD, > + CMD_STORE_VOLATILE, > + CMD_RESET_TPMESTABLISHED, > + CMD_GET_STATEBLOB, > + CMD_SET_STATEBLOB, > + CMD_STOP, > + CMD_GET_CONFIG, > + CMD_SET_DATAFD > +}; > + > +#endif /* _TPM_IOCTL_H */ > diff --git a/qapi/tpm.json b/qapi/tpm.json > index e8b2d8d..7093f26 100644 > --- a/qapi/tpm.json > +++ b/qapi/tpm.json > @@ -39,10 +39,12 @@ > # An enumeration of TPM types > # > # @passthrough: TPM passthrough type > +# @emulator: Software Emulator TPM type > +# Since: 2.11 > # > # Since: 1.5 > ## > -{ 'enum': 'TpmType', 'data': [ 'passthrough' ] } > +{ 'enum': 'TpmType', 'data': [ 'passthrough', 'emulator' ] } > > ## > # @query-tpm-types: > @@ -56,7 +58,7 @@ > # Example: > # > # -> { "execute": "query-tpm-types" } > -# <- { "return": [ "passthrough" ] } > +# <- { "return": [ "passthrough", "emulator" ] } > # > ## > { 'command': 'query-tpm-types', 'returns': ['TpmType'] } > @@ -77,16 +79,29 @@ > '*cancel-path' : 'str'} } > > ## > +# @TPMEmulatorOptions: > +# > +# Information about the TPM emulator type > +# > +# @chardev: Name of a unix socket chardev > +# > +# Since: 2.11 > +## > +{ 'struct': 'TPMEmulatorOptions', 'data': { 'chardev' : 'str' } } > + > +## > # @TpmTypeOptions: > # > # A union referencing different TPM backend types' configuration options > # > # @type: 'passthrough' The configuration options for the TPM passthrough type > +# 'emulator' The configuration options for TPM emulator backend type > # > # Since: 1.5 > ## > { 'union': 'TpmTypeOptions', > - 'data': { 'passthrough' : 'TPMPassthroughOptions' } } > + 'data': { 'passthrough' : 'TPMPassthroughOptions', > + 'emulator': 'TPMEmulatorOptions' } } > > ## > # @TPMInfo: > diff --git a/qemu-options.hx b/qemu-options.hx > index 77859a2..846b3fc 100644 > --- a/qemu-options.hx > +++ b/qemu-options.hx > @@ -3121,7 +3121,9 @@ DEF("tpmdev", HAS_ARG, QEMU_OPTION_tpmdev, \ > "-tpmdev passthrough,id=id[,path=path][,cancel-path=path]\n" > " use path to provide path to a character device; default is /dev/tpm0\n" > " use cancel-path to provide path to TPM's cancel sysfs entry; if\n" > - " not provided it will be searched for in /sys/class/misc/tpm?/device\n", > + " not provided it will be searched for in /sys/class/misc/tpm?/device\n" > + "-tpmdev emulator,id=id,chardev=dev\n" > + " configure the TPM device using chardev backend\n", > QEMU_ARCH_ALL) > STEXI > > @@ -3130,8 +3132,8 @@ The general form of a TPM device option is: > > @item -tpmdev @var{backend} ,id=@var{id} [,@var{options}] > @findex -tpmdev > -Backend type must be: > -@option{passthrough}. > +Backend type must be either one of the following: > +@option{passthrough}, @option{emulator}. > > The specific backend type will determine the applicable options. > The @code{-tpmdev} option creates the TPM backend and requires a > @@ -3181,6 +3183,20 @@ To create a passthrough TPM use the following two options: > Note that the @code{-tpmdev} id is @code{tpm0} and is referenced by > @code{tpmdev=tpm0} in the device option. > > +@item -tpmdev emulator, id=@var{id}, chardev=@var{dev} > + > +(Linux-host only) Enable access to a TPM emulator using Unix domain socket based > +chardev backend. > + > +@option{chardev} specifies the unique ID of a character device backend that provides connection to the software TPM server. > + > +To create a TPM emulator backend device with chardev socket backend: > +@example > + > +-chardev socket,id=chrtpm,path=/tmp/swtpm-sock -tpmdev emulator,id=tpm0,chardev=chrtpm -device tpm-tis,tpmdev=tpm0 > + > +@end example > + > @end table > > ETEXI > diff --git a/vl.c b/vl.c > index 9bb5058..ed86209 100644 > --- a/vl.c > +++ b/vl.c > @@ -4893,6 +4893,7 @@ int main(int argc, char **argv, char **envp) > res_free(); > > /* vhost-user must be cleaned up before chardevs. */ > + tpm_cleanup(); > net_cleanup(); > audio_cleanup(); > monitor_cleanup(); > -- > 2.7.4 >
diff --git a/configure b/configure index cb0f7ed..a1b956e 100755 --- a/configure +++ b/configure @@ -3467,6 +3467,12 @@ else tpm_passthrough=no fi +# TPM emulator is for all posix systems +if test "$mingw32" != "yes"; then + tpm_emulator=$tpm +else + tpm_emulator=no +fi ########################################## # attr probe @@ -5359,6 +5365,7 @@ echo "gcov enabled $gcov" echo "TPM support $tpm" echo "libssh2 support $libssh2" echo "TPM passthrough $tpm_passthrough" +echo "TPM emulator $tpm_emulator" echo "QOM debugging $qom_cast_debug" echo "Live block migration $live_block_migration" echo "lzo support $lzo" @@ -5937,12 +5944,16 @@ if test "$live_block_migration" = "yes" ; then echo "CONFIG_LIVE_BLOCK_MIGRATION=y" >> $config_host_mak fi -# TPM passthrough support? if test "$tpm" = "yes"; then echo 'CONFIG_TPM=$(CONFIG_SOFTMMU)' >> $config_host_mak + # TPM passthrough support? if test "$tpm_passthrough" = "yes"; then echo "CONFIG_TPM_PASSTHROUGH=y" >> $config_host_mak fi + # TPM emulator support? + if test "$tpm_emulator" = "yes"; then + echo "CONFIG_TPM_EMULATOR=y" >> $config_host_mak + fi fi echo "TRACE_BACKENDS=$trace_backends" >> $config_host_mak diff --git a/hmp.c b/hmp.c index 0fb2bc7..9cd8179 100644 --- a/hmp.c +++ b/hmp.c @@ -994,6 +994,7 @@ void hmp_info_tpm(Monitor *mon, const QDict *qdict) Error *err = NULL; unsigned int c = 0; TPMPassthroughOptions *tpo; + TPMEmulatorOptions *teo; info_list = qmp_query_tpm(&err); if (err) { @@ -1023,6 +1024,10 @@ void hmp_info_tpm(Monitor *mon, const QDict *qdict) tpo->has_cancel_path ? ",cancel-path=" : "", tpo->has_cancel_path ? tpo->cancel_path : ""); break; + case TPM_TYPE_OPTIONS_KIND_EMULATOR: + teo = ti->options->u.emulator.data; + monitor_printf(mon, ",chardev=%s", teo->chardev); + break; case TPM_TYPE_OPTIONS_KIND__MAX: break; } diff --git a/hw/tpm/Makefile.objs b/hw/tpm/Makefile.objs index 64cecc3..41f0b7a 100644 --- a/hw/tpm/Makefile.objs +++ b/hw/tpm/Makefile.objs @@ -1,2 +1,3 @@ common-obj-$(CONFIG_TPM_TIS) += tpm_tis.o common-obj-$(CONFIG_TPM_PASSTHROUGH) += tpm_passthrough.o tpm_util.o +common-obj-$(CONFIG_TPM_EMULATOR) += tpm_emulator.o tpm_util.o diff --git a/hw/tpm/tpm_emulator.c b/hw/tpm/tpm_emulator.c new file mode 100644 index 0000000..f7ad0a7 --- /dev/null +++ b/hw/tpm/tpm_emulator.c @@ -0,0 +1,613 @@ +/* + * Emulator TPM driver + * + * Copyright (c) 2017 Intel Corporation + * Author: Amarnath Valluri <amarnath.valluri@intel.com> + * + * Copyright (c) 2010 - 2013 IBM Corporation + * Authors: + * Stefan Berger <stefanb@us.ibm.com> + * + * Copyright (C) 2011 IAIK, Graz University of Technology + * Author: Andreas Niederl + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License as published by the Free Software Foundation; either + * version 2 of the License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, see <http://www.gnu.org/licenses/> + * + */ + +#include "qemu/osdep.h" +#include "qemu/error-report.h" +#include "qemu/sockets.h" +#include "io/channel-socket.h" +#include "sysemu/tpm_backend.h" +#include "tpm_int.h" +#include "hw/hw.h" +#include "hw/i386/pc.h" +#include "tpm_util.h" +#include "tpm_ioctl.h" +#include "migration/blocker.h" +#include "qapi/error.h" +#include "qapi/clone-visitor.h" +#include "chardev/char-fe.h" + +#include <fcntl.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <stdio.h> + +#define DEBUG_TPM 0 + +#define DPRINTF(fmt, ...) do { \ + if (DEBUG_TPM) { \ + fprintf(stderr, "tpm-emulator:"fmt"\n", ## __VA_ARGS__); \ + } \ +} while (0) + +#define TYPE_TPM_EMULATOR "tpm-emulator" +#define TPM_EMULATOR(obj) \ + OBJECT_CHECK(TPMEmulator, (obj), TYPE_TPM_EMULATOR) + +#define TPM_EMULATOR_IMPLEMENTS_ALL_CAPS(S, cap) (((S)->caps & (cap)) == (cap)) + +static const TPMDriverOps tpm_emulator_driver; + +/* data structures */ +typedef struct TPMEmulator { + TPMBackend parent; + + TPMEmulatorOptions *options; + CharBackend ctrl_chr; + QIOChannel *data_ioc; + TPMVersion tpm_version; + ptm_cap caps; /* capabilities of the TPM */ + uint8_t cur_locty_number; /* last set locality */ + QemuMutex state_lock; + Error *migration_blocker; +} TPMEmulator; + + +static int tpm_emulator_ctrlcmd(CharBackend *dev, unsigned long cmd, void *msg, + size_t msg_len_in, size_t msg_len_out) +{ + uint32_t cmd_no = cpu_to_be32(cmd); + ssize_t n = sizeof(uint32_t) + msg_len_in; + uint8_t *buf = NULL; + + buf = g_alloca(n); + memcpy(buf, &cmd_no, sizeof(cmd_no)); + memcpy(buf + sizeof(cmd_no), msg, msg_len_in); + + n = qemu_chr_fe_write_all(dev, buf, n); + if (n <= 0) { + return -1; + } + + /* return if no reply expected */ + if (msg_len_out <= 0) { + return 0; + } + + n = qemu_chr_fe_read_all(dev, msg, msg_len_out); + if (n < 0) { + return -1; + } + + return 0; +} + +static int tpm_emulator_unix_tx_bufs(TPMEmulator *tpm_emu, + const uint8_t *in, uint32_t in_len, + uint8_t *out, uint32_t out_len, + bool *selftest_done) +{ + ssize_t ret; + bool is_selftest = false; + const struct tpm_resp_hdr *hdr = NULL; + Error *err = NULL; + + if (selftest_done) { + *selftest_done = false; + is_selftest = tpm_util_is_selftest(in, in_len); + } + + ret = qio_channel_write_all(tpm_emu->data_ioc, (char *)in, in_len, &err); + if (ret != 0) { + if (err) { + error_prepend(&err, "tpm-emulator: error while transmitting data:"); + } else { + error_report("tpm-emulator: Unknown error while transmitting data"); + } + + goto err_exit; + } + + ret = qio_channel_read(tpm_emu->data_ioc, (char *)out, out_len, &err); + if (ret < 0) { + if (err) { + error_prepend(&err, "tpm-emulator: error while reading data:"); + } else { + error_report("tpm-emulator: Unknown error while reading data"); + } + } else if (ret >= sizeof(*hdr)) { + hdr = (struct tpm_resp_hdr *)out; + } + + if (!hdr || be32_to_cpu(hdr->len) != ret) { + error_report("tpm-emulator: received invalid response " + "packet from TPM with length :%ld", ret); + ret = -1; + goto err_exit; + } + + if (is_selftest) { + *selftest_done = (be32_to_cpu(hdr->errcode) == 0); + } + + return 0; + +err_exit: + if (ret < 0) { + tpm_util_write_fatal_error_response(out, out_len); + } + + return ret; +} + +static int tpm_emulator_set_locality(TPMEmulator *tpm_emu, uint8_t locty_number) +{ + ptm_loc loc; + + DPRINTF("%s : locality: 0x%x", __func__, locty_number); + + if (tpm_emu->cur_locty_number == locty_number) { + return 0; + } + + DPRINTF("setting locality : 0x%x", locty_number); + loc.u.req.loc = locty_number; + if (tpm_emulator_ctrlcmd(&tpm_emu->ctrl_chr, CMD_SET_LOCALITY, &loc, + sizeof(loc), sizeof(loc)) < 0) { + error_report("tpm-emulator: could not set locality : %s", + strerror(errno)); + return -1; + } + + loc.u.resp.tpm_result = be32_to_cpu(loc.u.resp.tpm_result); + if (loc.u.resp.tpm_result != 0) { + error_report("tpm-emulator: TPM result for set locality : 0x%x", + loc.u.resp.tpm_result); + return -1; + } + + tpm_emu->cur_locty_number = locty_number; + + return 0; +} + +static void tpm_emulator_handle_request(TPMBackend *tb, TPMBackendCmd cmd) +{ + TPMEmulator *tpm_emu = TPM_EMULATOR(tb); + TPMLocality *locty = NULL; + bool selftest_done = false; + + DPRINTF("processing command type %d", cmd); + + switch (cmd) { + case TPM_BACKEND_CMD_PROCESS_CMD: + qemu_mutex_lock(&tpm_emu->state_lock); + locty = tb->tpm_state->locty_data; + if (tpm_emulator_set_locality(tpm_emu, + tb->tpm_state->locty_number) < 0) { + tpm_util_write_fatal_error_response(locty->r_buffer.buffer, + locty->r_buffer.size); + } else { + tpm_emulator_unix_tx_bufs(tpm_emu, locty->w_buffer.buffer, + locty->w_offset, + locty->r_buffer.buffer, + locty->r_buffer.size, + &selftest_done); + } + + tb->recv_data_callback(tb->tpm_state, tb->tpm_state->locty_number, + selftest_done); + qemu_mutex_unlock(&tpm_emu->state_lock); + + break; + case TPM_BACKEND_CMD_INIT: + case TPM_BACKEND_CMD_END: + case TPM_BACKEND_CMD_TPM_RESET: + /* nothing to do */ + break; + } +} + +static int tpm_emulator_probe_caps(TPMEmulator *tpm_emu) +{ + DPRINTF("%s", __func__); + if (tpm_emulator_ctrlcmd(&tpm_emu->ctrl_chr, CMD_GET_CAPABILITY, + &tpm_emu->caps, 0, sizeof(tpm_emu->caps)) < 0) { + error_report("tpm-emulator: probing failed : %s", strerror(errno)); + return -1; + } + + tpm_emu->caps = be64_to_cpu(tpm_emu->caps); + + DPRINTF("capbilities : 0x%lx", tpm_emu->caps); + + return 0; +} + +static int tpm_emulator_check_caps(TPMEmulator *tpm_emu) +{ + ptm_cap caps = 0; + const char *tpm = NULL; + + /* check for min. required capabilities */ + switch (tpm_emu->tpm_version) { + case TPM_VERSION_1_2: + caps = PTM_CAP_INIT | PTM_CAP_SHUTDOWN | PTM_CAP_GET_TPMESTABLISHED | + PTM_CAP_SET_LOCALITY | PTM_CAP_SET_DATAFD; + tpm = "1.2"; + break; + case TPM_VERSION_2_0: + caps = PTM_CAP_INIT | PTM_CAP_SHUTDOWN | PTM_CAP_GET_TPMESTABLISHED | + PTM_CAP_SET_LOCALITY | PTM_CAP_RESET_TPMESTABLISHED | + PTM_CAP_SET_DATAFD; + tpm = "2"; + break; + case TPM_VERSION_UNSPEC: + error_report("tpm-emulator: TPM version has not been set"); + return -1; + } + + if (!TPM_EMULATOR_IMPLEMENTS_ALL_CAPS(tpm_emu, caps)) { + error_report("tpm-emulator: TPM does not implement minimum set of " + "required capabilities for TPM %s (0x%x)", tpm, (int)caps); + return -1; + } + + return 0; +} + +static int tpm_emulator_startup_tpm(TPMBackend *tb) +{ + TPMEmulator *tpm_emu = TPM_EMULATOR(tb); + ptm_init init; + ptm_res res; + + DPRINTF("%s", __func__); + if (tpm_emulator_ctrlcmd(&tpm_emu->ctrl_chr, CMD_INIT, &init, sizeof(init), + sizeof(init)) < 0) { + error_report("tpm-emulator: could not send INIT: %s", + strerror(errno)); + goto err_exit; + } + + res = be32_to_cpu(init.u.resp.tpm_result); + if (res) { + error_report("tpm-emulator: TPM result for CMD_INIT: 0x%x", res); + goto err_exit; + } + return 0; + +err_exit: + return -1; +} + +static bool tpm_emulator_get_tpm_established_flag(TPMBackend *tb) +{ + TPMEmulator *tpm_emu = TPM_EMULATOR(tb); + ptm_est est; + + DPRINTF("%s", __func__); + if (tpm_emulator_ctrlcmd(&tpm_emu->ctrl_chr, CMD_GET_TPMESTABLISHED, &est, + 0, sizeof(est)) < 0) { + error_report("tpm-emulator: Could not get the TPM established flag: %s", + strerror(errno)); + return false; + } + DPRINTF("established flag: %0x", est.u.resp.bit); + + return (est.u.resp.bit != 0); +} + +static int tpm_emulator_reset_tpm_established_flag(TPMBackend *tb, + uint8_t locty) +{ + TPMEmulator *tpm_emu = TPM_EMULATOR(tb); + ptm_reset_est reset_est; + ptm_res res; + + /* only a TPM 2.0 will support this */ + if (tpm_emu->tpm_version != TPM_VERSION_2_0) { + return 0; + } + + reset_est.u.req.loc = tpm_emu->cur_locty_number; + if (tpm_emulator_ctrlcmd(&tpm_emu->ctrl_chr, CMD_RESET_TPMESTABLISHED, + &reset_est, sizeof(reset_est), + sizeof(reset_est)) < 0) { + error_report("tpm-emulator: Could not reset the establishment bit: %s", + strerror(errno)); + return -1; + } + + res = be32_to_cpu(reset_est.u.resp.tpm_result); + if (res) { + error_report("tpm-emulator: TPM result for rest establixhed flag: 0x%x", + res); + return -1; + } + + return 0; +} + +static void tpm_emulator_cancel_cmd(TPMBackend *tb) +{ + TPMEmulator *tpm_emu = TPM_EMULATOR(tb); + ptm_res res; + + if (!TPM_EMULATOR_IMPLEMENTS_ALL_CAPS(tpm_emu, PTM_CAP_CANCEL_TPM_CMD)) { + DPRINTF("Backend does not support CANCEL_TPM_CMD"); + return; + } + + if (tpm_emulator_ctrlcmd(&tpm_emu->ctrl_chr, CMD_CANCEL_TPM_CMD, &res, 0, + sizeof(res)) < 0) { + error_report("tpm-emulator: Could not cancel command: %s", + strerror(errno)); + } else if (res != 0) { + error_report("tpm-emulator: Failed to cancel TPM: 0x%x", + be32_to_cpu(res)); + } +} + +static TPMVersion tpm_emulator_get_tpm_version(TPMBackend *tb) +{ + TPMEmulator *tpm_emu = TPM_EMULATOR(tb); + + return tpm_emu->tpm_version; +} + +static int tpm_emulator_block_migration(TPMEmulator *tpm_emu) +{ + Error *err = NULL; + + error_setg(&tpm_emu->migration_blocker, + "Migration disabled: TPM emulator not yet migratable"); + migrate_add_blocker(tpm_emu->migration_blocker, &err); + if (err) { + error_report_err(err); + error_free(tpm_emu->migration_blocker); + tpm_emu->migration_blocker = NULL; + + return -1; + } + + return 0; +} + +static int tpm_emulator_prepare_data_fd(TPMEmulator *tpm_emu) +{ + ptm_res res; + Error *err = NULL; + int fds[2] = { -1, -1 }; + + if (socketpair(AF_UNIX, SOCK_SEQPACKET, 0, fds) < 0) { + error_report("tpm-emulator: Failed to create socketpair"); + return -1; + } + + qemu_chr_fe_set_msgfds(&tpm_emu->ctrl_chr, fds + 1, 1); + + if (tpm_emulator_ctrlcmd(&tpm_emu->ctrl_chr, CMD_SET_DATAFD, &res, 0, + sizeof(res)) || res != 0) { + error_report("tpm-emulator: Failed to send CMD_SET_DATAFD: %s", + strerror(errno)); + goto err_exit; + } + + tpm_emu->data_ioc = QIO_CHANNEL(qio_channel_socket_new_fd(fds[0], &err)); + if (err) { + error_prepend(&err, "tpm-emulator: Failed to create io channel: "); + goto err_exit; + } + + closesocket(fds[1]); + + return 0; + +err_exit: + closesocket(fds[0]); + closesocket(fds[1]); + return -1; +} + +static int tpm_emulator_handle_device_opts(TPMEmulator *tpm_emu, QemuOpts *opts) +{ + const char *value; + + value = qemu_opt_get(opts, "chardev"); + if (value) { + Error *err = NULL; + Chardev *dev = qemu_chr_find(value); + + if (!dev) { + error_report("tpm-emulator: tpm chardev '%s' not found.", value); + goto err; + } + + if (!qemu_chr_fe_init(&tpm_emu->ctrl_chr, dev, &err)) { + error_prepend(&err, "tpm-emulator: No valid chardev found at '%s':", + value); + goto err; + } + + tpm_emu->options->chardev = g_strdup(value); + } + + if (tpm_emulator_prepare_data_fd(tpm_emu) < 0) { + goto err; + } + + /* FIXME: tpm_util_test_tpmdev() accepts only on socket fd, as it also used + * by passthrough driver, which not yet using GIOChannel. + */ + if (tpm_util_test_tpmdev(QIO_CHANNEL_SOCKET(tpm_emu->data_ioc)->fd, + &tpm_emu->tpm_version)) { + error_report("'%s' is not emulating TPM device. Error: %s", + tpm_emu->options->chardev, strerror(errno)); + goto err; + } + + DPRINTF("TPM Version %s", tpm_emu->tpm_version == TPM_VERSION_1_2 ? "1.2" : + (tpm_emu->tpm_version == TPM_VERSION_2_0 ? "2.0" : "Unspecified")); + + if (tpm_emulator_probe_caps(tpm_emu) || + tpm_emulator_check_caps(tpm_emu)) { + goto err; + } + + return tpm_emulator_block_migration(tpm_emu); + +err: + DPRINTF("Startup error"); + return -1; +} + +static TPMBackend *tpm_emulator_create(QemuOpts *opts, const char *id) +{ + TPMBackend *tb = TPM_BACKEND(object_new(TYPE_TPM_EMULATOR)); + + tb->id = g_strdup(id); + + if (tpm_emulator_handle_device_opts(TPM_EMULATOR(tb), opts)) { + goto err_exit; + } + + return tb; + +err_exit: + object_unref(OBJECT(tb)); + + return NULL; +} + +static TpmTypeOptions *tpm_emulator_get_tpm_options(TPMBackend *tb) +{ + TPMEmulator *tpm_emu = TPM_EMULATOR(tb); + TpmTypeOptions *options = g_new0(TpmTypeOptions, 1); + + options->type = TPM_TYPE_OPTIONS_KIND_EMULATOR; + options->u.emulator.data = QAPI_CLONE(TPMEmulatorOptions, tpm_emu->options); + + return options; +} + +static const QemuOptDesc tpm_emulator_cmdline_opts[] = { + TPM_STANDARD_CMDLINE_OPTS, + { + .name = "chardev", + .type = QEMU_OPT_STRING, + .help = "Character device to use for out-of-band control messages", + }, + { /* end of list */ }, +}; + +static const TPMDriverOps tpm_emulator_driver = { + .type = TPM_TYPE_EMULATOR, + .opts = tpm_emulator_cmdline_opts, + .desc = "TPM emulator backend driver", + + .create = tpm_emulator_create, + .startup_tpm = tpm_emulator_startup_tpm, + .cancel_cmd = tpm_emulator_cancel_cmd, + .get_tpm_established_flag = tpm_emulator_get_tpm_established_flag, + .reset_tpm_established_flag = tpm_emulator_reset_tpm_established_flag, + .get_tpm_version = tpm_emulator_get_tpm_version, + .get_tpm_options = tpm_emulator_get_tpm_options, +}; + +static void tpm_emulator_inst_init(Object *obj) +{ + TPMEmulator *tpm_emu = TPM_EMULATOR(obj); + + DPRINTF("%s", __func__); + tpm_emu->options = g_new0(TPMEmulatorOptions, 1); + tpm_emu->cur_locty_number = ~0; + qemu_mutex_init(&tpm_emu->state_lock); +} + +/* + * Gracefully shut down the external TPM + */ +static void tpm_emulator_shutdown(TPMEmulator *tpm_emu) +{ + ptm_res res; + + if (tpm_emulator_ctrlcmd(&tpm_emu->ctrl_chr, CMD_SHUTDOWN, &res, 0, + sizeof(res)) < 0) { + error_report("tpm-emulator: Could not cleanly shutdown the TPM: %s", + strerror(errno)); + } else if (res != 0) { + error_report("tpm-emulator: TPM result for sutdown: 0x%x", + be32_to_cpu(res)); + } +} + +static void tpm_emulator_inst_finalize(Object *obj) +{ + TPMEmulator *tpm_emu = TPM_EMULATOR(obj); + + tpm_emulator_shutdown(tpm_emu); + + if (tpm_emu->data_ioc) { + qio_channel_close(tpm_emu->data_ioc, NULL); + } + + qemu_chr_fe_deinit(&tpm_emu->ctrl_chr, false); + + if (tpm_emu->options) { + qapi_free_TPMEmulatorOptions(tpm_emu->options); + } + + if (tpm_emu->migration_blocker) { + migrate_del_blocker(tpm_emu->migration_blocker); + error_free(tpm_emu->migration_blocker); + } +} + +static void tpm_emulator_class_init(ObjectClass *klass, void *data) +{ + TPMBackendClass *tbc = TPM_BACKEND_CLASS(klass); + tbc->ops = &tpm_emulator_driver; + tbc->handle_request = tpm_emulator_handle_request; +} + +static const TypeInfo tpm_emulator_info = { + .name = TYPE_TPM_EMULATOR, + .parent = TYPE_TPM_BACKEND, + .instance_size = sizeof(TPMEmulator), + .class_init = tpm_emulator_class_init, + .instance_init = tpm_emulator_inst_init, + .instance_finalize = tpm_emulator_inst_finalize, +}; + +static void tpm_emulator_register(void) +{ + type_register_static(&tpm_emulator_info); + tpm_register_driver(&tpm_emulator_driver); +} + +type_init(tpm_emulator_register) diff --git a/hw/tpm/tpm_ioctl.h b/hw/tpm/tpm_ioctl.h new file mode 100644 index 0000000..33564b1 --- /dev/null +++ b/hw/tpm/tpm_ioctl.h @@ -0,0 +1,246 @@ +/* + * tpm_ioctl.h + * + * (c) Copyright IBM Corporation 2014, 2015. + * + * This file is licensed under the terms of the 3-clause BSD license + */ +#ifndef _TPM_IOCTL_H_ +#define _TPM_IOCTL_H_ + +#include <stdint.h> +#include <sys/uio.h> +#include <sys/types.h> +#include <sys/ioctl.h> + +/* + * Every response from a command involving a TPM command execution must hold + * the ptm_res as the first element. + * ptm_res corresponds to the error code of a command executed by the TPM. + */ + +typedef uint32_t ptm_res; + +/* PTM_GET_TPMESTABLISHED: get the establishment bit */ +struct ptm_est { + union { + struct { + ptm_res tpm_result; + unsigned char bit; /* TPM established bit */ + } resp; /* response */ + } u; +}; + +/* PTM_RESET_TPMESTABLISHED: reset establishment bit */ +struct ptm_reset_est { + union { + struct { + uint8_t loc; /* locality to use */ + } req; /* request */ + struct { + ptm_res tpm_result; + } resp; /* response */ + } u; +}; + +/* PTM_INIT */ +struct ptm_init { + union { + struct { + uint32_t init_flags; /* see definitions below */ + } req; /* request */ + struct { + ptm_res tpm_result; + } resp; /* response */ + } u; +}; + +/* above init_flags */ +#define PTM_INIT_FLAG_DELETE_VOLATILE (1 << 0) + /* delete volatile state file after reading it */ + +/* PTM_SET_LOCALITY */ +struct ptm_loc { + union { + struct { + uint8_t loc; /* locality to set */ + } req; /* request */ + struct { + ptm_res tpm_result; + } resp; /* response */ + } u; +}; + +/* PTM_HASH_DATA: hash given data */ +struct ptm_hdata { + union { + struct { + uint32_t length; + uint8_t data[4096]; + } req; /* request */ + struct { + ptm_res tpm_result; + } resp; /* response */ + } u; +}; + +/* + * size of the TPM state blob to transfer; x86_64 can handle 8k, + * ppc64le only ~7k; keep the response below a 4k page size + */ +#define PTM_STATE_BLOB_SIZE (3 * 1024) + +/* + * The following is the data structure to get state blobs from the TPM. + * If the size of the state blob exceeds the PTM_STATE_BLOB_SIZE, multiple reads + * with this ioctl and with adjusted offset are necessary. All bytes + * must be transferred and the transfer is done once the last byte has been + * returned. + * It is possible to use the read() interface for reading the data; however, the + * first bytes of the state blob will be part of the response to the ioctl(); a + * subsequent read() is only necessary if the total length (totlength) exceeds + * the number of received bytes. seek() is not supported. + */ +struct ptm_getstate { + union { + struct { + uint32_t state_flags; /* may be: PTM_STATE_FLAG_DECRYPTED */ + uint32_t type; /* which blob to pull */ + uint32_t offset; /* offset from where to read */ + } req; /* request */ + struct { + ptm_res tpm_result; + uint32_t state_flags; /* may be: PTM_STATE_FLAG_ENCRYPTED */ + uint32_t totlength; /* total length that will be transferred */ + uint32_t length; /* number of bytes in following buffer */ + uint8_t data[PTM_STATE_BLOB_SIZE]; + } resp; /* response */ + } u; +}; + +/* TPM state blob types */ +#define PTM_BLOB_TYPE_PERMANENT 1 +#define PTM_BLOB_TYPE_VOLATILE 2 +#define PTM_BLOB_TYPE_SAVESTATE 3 + +/* state_flags above : */ +#define PTM_STATE_FLAG_DECRYPTED 1 /* on input: get decrypted state */ +#define PTM_STATE_FLAG_ENCRYPTED 2 /* on output: state is encrypted */ + +/* + * The following is the data structure to set state blobs in the TPM. + * If the size of the state blob exceeds the PTM_STATE_BLOB_SIZE, multiple + * 'writes' using this ioctl are necessary. The last packet is indicated + * by the length being smaller than the PTM_STATE_BLOB_SIZE. + * The very first packet may have a length indicator of '0' enabling + * a write() with all the bytes from a buffer. If the write() interface + * is used, a final ioctl with a non-full buffer must be made to indicate + * that all data were transferred (a write with 0 bytes would not work). + */ +struct ptm_setstate { + union { + struct { + uint32_t state_flags; /* may be PTM_STATE_FLAG_ENCRYPTED */ + uint32_t type; /* which blob to set */ + uint32_t length; /* length of the data; + use 0 on the first packet to + transfer using write() */ + uint8_t data[PTM_STATE_BLOB_SIZE]; + } req; /* request */ + struct { + ptm_res tpm_result; + } resp; /* response */ + } u; +}; + +/* + * PTM_GET_CONFIG: Data structure to get runtime configuration information + * such as which keys are applied. + */ +struct ptm_getconfig { + union { + struct { + ptm_res tpm_result; + uint32_t flags; + } resp; /* response */ + } u; +}; + +#define PTM_CONFIG_FLAG_FILE_KEY 0x1 +#define PTM_CONFIG_FLAG_MIGRATION_KEY 0x2 + + +typedef uint64_t ptm_cap; +typedef struct ptm_est ptm_est; +typedef struct ptm_reset_est ptm_reset_est; +typedef struct ptm_loc ptm_loc; +typedef struct ptm_hdata ptm_hdata; +typedef struct ptm_init ptm_init; +typedef struct ptm_getstate ptm_getstate; +typedef struct ptm_setstate ptm_setstate; +typedef struct ptm_getconfig ptm_getconfig; + +/* capability flags returned by PTM_GET_CAPABILITY */ +#define PTM_CAP_INIT (1) +#define PTM_CAP_SHUTDOWN (1 << 1) +#define PTM_CAP_GET_TPMESTABLISHED (1 << 2) +#define PTM_CAP_SET_LOCALITY (1 << 3) +#define PTM_CAP_HASHING (1 << 4) +#define PTM_CAP_CANCEL_TPM_CMD (1 << 5) +#define PTM_CAP_STORE_VOLATILE (1 << 6) +#define PTM_CAP_RESET_TPMESTABLISHED (1 << 7) +#define PTM_CAP_GET_STATEBLOB (1 << 8) +#define PTM_CAP_SET_STATEBLOB (1 << 9) +#define PTM_CAP_STOP (1 << 10) +#define PTM_CAP_GET_CONFIG (1 << 11) +#define PTM_CAP_SET_DATAFD (1 << 12) + +enum { + PTM_GET_CAPABILITY = _IOR('P', 0, ptm_cap), + PTM_INIT = _IOWR('P', 1, ptm_init), + PTM_SHUTDOWN = _IOR('P', 2, ptm_res), + PTM_GET_TPMESTABLISHED = _IOR('P', 3, ptm_est), + PTM_SET_LOCALITY = _IOWR('P', 4, ptm_loc), + PTM_HASH_START = _IOR('P', 5, ptm_res), + PTM_HASH_DATA = _IOWR('P', 6, ptm_hdata), + PTM_HASH_END = _IOR('P', 7, ptm_res), + PTM_CANCEL_TPM_CMD = _IOR('P', 8, ptm_res), + PTM_STORE_VOLATILE = _IOR('P', 9, ptm_res), + PTM_RESET_TPMESTABLISHED = _IOWR('P', 10, ptm_reset_est), + PTM_GET_STATEBLOB = _IOWR('P', 11, ptm_getstate), + PTM_SET_STATEBLOB = _IOWR('P', 12, ptm_setstate), + PTM_STOP = _IOR('P', 13, ptm_res), + PTM_GET_CONFIG = _IOR('P', 14, ptm_getconfig), + PTM_SET_DATAFD = _IOR('P', 15, ptm_res), +}; + +/* + * Commands used by the non-CUSE TPMs + * + * All messages container big-endian data. + * + * The return messages only contain the 'resp' part of the unions + * in the data structures above. Besides that the limits in the + * buffers above (ptm_hdata:u.req.data and ptm_get_state:u.resp.data + * and ptm_set_state:u.req.data) are 0xffffffff. + */ +enum { + CMD_GET_CAPABILITY = 1, + CMD_INIT, + CMD_SHUTDOWN, + CMD_GET_TPMESTABLISHED, + CMD_SET_LOCALITY, + CMD_HASH_START, + CMD_HASH_DATA, + CMD_HASH_END, + CMD_CANCEL_TPM_CMD, + CMD_STORE_VOLATILE, + CMD_RESET_TPMESTABLISHED, + CMD_GET_STATEBLOB, + CMD_SET_STATEBLOB, + CMD_STOP, + CMD_GET_CONFIG, + CMD_SET_DATAFD +}; + +#endif /* _TPM_IOCTL_H */ diff --git a/qapi/tpm.json b/qapi/tpm.json index e8b2d8d..7093f26 100644 --- a/qapi/tpm.json +++ b/qapi/tpm.json @@ -39,10 +39,12 @@ # An enumeration of TPM types # # @passthrough: TPM passthrough type +# @emulator: Software Emulator TPM type +# Since: 2.11 # # Since: 1.5 ## -{ 'enum': 'TpmType', 'data': [ 'passthrough' ] } +{ 'enum': 'TpmType', 'data': [ 'passthrough', 'emulator' ] } ## # @query-tpm-types: @@ -56,7 +58,7 @@ # Example: # # -> { "execute": "query-tpm-types" } -# <- { "return": [ "passthrough" ] } +# <- { "return": [ "passthrough", "emulator" ] } # ## { 'command': 'query-tpm-types', 'returns': ['TpmType'] } @@ -77,16 +79,29 @@ '*cancel-path' : 'str'} } ## +# @TPMEmulatorOptions: +# +# Information about the TPM emulator type +# +# @chardev: Name of a unix socket chardev +# +# Since: 2.11 +## +{ 'struct': 'TPMEmulatorOptions', 'data': { 'chardev' : 'str' } } + +## # @TpmTypeOptions: # # A union referencing different TPM backend types' configuration options # # @type: 'passthrough' The configuration options for the TPM passthrough type +# 'emulator' The configuration options for TPM emulator backend type # # Since: 1.5 ## { 'union': 'TpmTypeOptions', - 'data': { 'passthrough' : 'TPMPassthroughOptions' } } + 'data': { 'passthrough' : 'TPMPassthroughOptions', + 'emulator': 'TPMEmulatorOptions' } } ## # @TPMInfo: diff --git a/qemu-options.hx b/qemu-options.hx index 77859a2..846b3fc 100644 --- a/qemu-options.hx +++ b/qemu-options.hx @@ -3121,7 +3121,9 @@ DEF("tpmdev", HAS_ARG, QEMU_OPTION_tpmdev, \ "-tpmdev passthrough,id=id[,path=path][,cancel-path=path]\n" " use path to provide path to a character device; default is /dev/tpm0\n" " use cancel-path to provide path to TPM's cancel sysfs entry; if\n" - " not provided it will be searched for in /sys/class/misc/tpm?/device\n", + " not provided it will be searched for in /sys/class/misc/tpm?/device\n" + "-tpmdev emulator,id=id,chardev=dev\n" + " configure the TPM device using chardev backend\n", QEMU_ARCH_ALL) STEXI @@ -3130,8 +3132,8 @@ The general form of a TPM device option is: @item -tpmdev @var{backend} ,id=@var{id} [,@var{options}] @findex -tpmdev -Backend type must be: -@option{passthrough}. +Backend type must be either one of the following: +@option{passthrough}, @option{emulator}. The specific backend type will determine the applicable options. The @code{-tpmdev} option creates the TPM backend and requires a @@ -3181,6 +3183,20 @@ To create a passthrough TPM use the following two options: Note that the @code{-tpmdev} id is @code{tpm0} and is referenced by @code{tpmdev=tpm0} in the device option. +@item -tpmdev emulator, id=@var{id}, chardev=@var{dev} + +(Linux-host only) Enable access to a TPM emulator using Unix domain socket based +chardev backend. + +@option{chardev} specifies the unique ID of a character device backend that provides connection to the software TPM server. + +To create a TPM emulator backend device with chardev socket backend: +@example + +-chardev socket,id=chrtpm,path=/tmp/swtpm-sock -tpmdev emulator,id=tpm0,chardev=chrtpm -device tpm-tis,tpmdev=tpm0 + +@end example + @end table ETEXI diff --git a/vl.c b/vl.c index 9bb5058..ed86209 100644 --- a/vl.c +++ b/vl.c @@ -4893,6 +4893,7 @@ int main(int argc, char **argv, char **envp) res_free(); /* vhost-user must be cleaned up before chardevs. */ + tpm_cleanup(); net_cleanup(); audio_cleanup(); monitor_cleanup();
This change introduces a new TPM backend driver that can communicate with swtpm(software TPM emulator) using unix domain socket interface. QEMU talks to TPM emulator using QEMU's socket-based chardev backend device. Swtpm uses two Unix sockets for communications, one for plain TPM commands and responses, and one for out-of-band control messages. QEMU passes data socket to be used over the control channel. The swtpm and associated tools can be found here: https://github.com/stefanberger/swtpm The swtpm's control channel protocol specification can be found here: https://github.com/stefanberger/swtpm/wiki/Control-Channel-Specification Usage: # setup TPM state directory mkdir /tmp/mytpm chown -R tss:root /tmp/mytpm /usr/bin/swtpm_setup --tpm-state /tmp/mytpm --createek # Ask qemu to use TPM emulator with given tpm state directory qemu-system-x86_64 \ [...] \ -chardev socket,id=chrtpm,path=/tmp/swtpm-sock \ -tpmdev emulator,id=tpm0,chardev=chrtpm \ -device tpm-tis,tpmdev=tpm0 \ [...] Signed-off-by: Amarnath Valluri <amarnath.valluri@intel.com> --- configure | 13 +- hmp.c | 5 + hw/tpm/Makefile.objs | 1 + hw/tpm/tpm_emulator.c | 613 ++++++++++++++++++++++++++++++++++++++++++++++++++ hw/tpm/tpm_ioctl.h | 246 ++++++++++++++++++++ qapi/tpm.json | 21 +- qemu-options.hx | 22 +- vl.c | 1 + 8 files changed, 915 insertions(+), 7 deletions(-) create mode 100644 hw/tpm/tpm_emulator.c create mode 100644 hw/tpm/tpm_ioctl.h