@@ -222,6 +222,17 @@ supported_hvf_target() {
return 1
}
+supported_whpx_target() {
+ test "$whpx" = "yes" || return 1
+ glob "$1" "*-softmmu" || return 1
+ case "${1%-softmmu}" in
+ i386|x86_64)
+ return 0
+ ;;
+ esac
+ return 1
+}
+
supported_target() {
case "$1" in
*-softmmu)
@@ -248,6 +259,7 @@ supported_target() {
supported_xen_target "$1" && return 0
supported_hax_target "$1" && return 0
supported_hvf_target "$1" && return 0
+ supported_whpx_target "$1" && return 0
print_error "TCG disabled, but hardware accelerator not available for '$target'"
return 1
}
@@ -338,6 +350,7 @@ vhost_user=""
kvm="no"
hax="no"
hvf="no"
+whpx="no"
rdma=""
gprof="no"
debug_tcg="no"
@@ -1054,6 +1067,10 @@ for opt do
;;
--enable-hvf) hvf="yes"
;;
+ --disable-whpx) whpx="no"
+ ;;
+ --enable-whpx) whpx="yes"
+ ;;
--disable-tcg-interpreter) tcg_interpreter="no"
;;
--enable-tcg-interpreter) tcg_interpreter="yes"
@@ -1548,6 +1565,7 @@ disabled with --disable-FEATURE, default is enabled if available:
kvm KVM acceleration support
hax HAX acceleration support
hvf Hypervisor.framework acceleration support
+ whpx Windows Hypervisor Platform acceleration support
rdma RDMA-based migration support
vde support for vde network
netmap support for netmap network
@@ -2446,6 +2464,30 @@ if test "$xen_pv_domain_build" = "yes" &&
fi
##########################################
+# Windows Hypervisor Platform accelerator (WHPX) check
+if test "$whpx" != "no" ; then
+ cat > $TMPC << EOF
+#include <windows.h>
+#include <winhvplatform.h>
+#include <winhvemulation.h>
+int main(void) {
+ WHV_CAPABILITY whpx_cap;
+ WHvGetCapability(WHvCapabilityCodeFeatures, &whpx_cap, sizeof(whpx_cap));
+ return 0;
+}
+EOF
+ if compile_prog "" "-lwinhvplatform -lwinhvemulation" ; then
+ libs_softmmu="$libs_softmmu -lwinhvplatform -lwinhvemulation"
+ whpx="yes"
+ else
+ if test "$whpx" = "yes"; then
+ feature_not_found "winhvplatform" "winhvemulation is not installed"
+ fi
+ whpx="no"
+ fi
+fi
+
+##########################################
# Sparse probe
if test "$sparse" != "no" ; then
if has cgcc; then
@@ -5565,6 +5607,7 @@ echo "Install blobs $blobs"
echo "KVM support $kvm"
echo "HAX support $hax"
echo "HVF support $hvf"
+echo "WHPX support $whpx"
echo "TCG support $tcg"
if test "$tcg" = "yes" ; then
echo "TCG debug enabled $debug_tcg"
@@ -5719,7 +5762,7 @@ if test "$mingw32" = "yes" ; then
echo "CONFIG_QGA_NTDDDISK=y" >> $config_host_mak
fi
if test "$guest_agent_msi" = "yes"; then
- echo "QEMU_GA_MSI_ENABLED=yes" >> $config_host_mak
+ echo "QEMU_GA_MSI_ENABLED=yes" >> $config_host_mak
echo "QEMU_GA_MSI_MINGW_DLL_PATH=${QEMU_GA_MSI_MINGW_DLL_PATH}" >> $config_host_mak
echo "QEMU_GA_MSI_WITH_VSS=${QEMU_GA_MSI_WITH_VSS}" >> $config_host_mak
echo "QEMU_GA_MSI_ARCH=${QEMU_GA_MSI_ARCH}" >> $config_host_mak
@@ -6641,6 +6684,9 @@ fi
if supported_hvf_target $target; then
echo "CONFIG_HVF=y" >> $config_target_mak
fi
+if supported_whpx_target $target; then
+ echo "CONFIG_WHPX=y" >> $config_target_mak
+fi
if test "$target_bigendian" = "yes" ; then
echo "TARGET_WORDS_BIGENDIAN=y" >> $config_target_mak
fi
@@ -31,7 +31,7 @@ DEF("machine", HAS_ARG, QEMU_OPTION_machine, \
"-machine [type=]name[,prop[=value][,...]]\n"
" selects emulated machine ('-machine help' for list)\n"
" property accel=accel1[:accel2[:...]] selects accelerator\n"
- " supported accelerators are kvm, xen, hax, hvf or tcg (default: tcg)\n"
+ " supported accelerators are kvm, xen, hax, hvf, whpx or tcg (default: tcg)\n"
" kernel_irqchip=on|off|split controls accelerated irqchip support (default=off)\n"
" vmport=on|off|auto controls emulation of vmport (default: auto)\n"
" kvm_shadow_mem=size of KVM shadow MMU in bytes\n"
@@ -66,7 +66,7 @@ Supported machine properties are:
@table @option
@item accel=@var{accels1}[:@var{accels2}[:...]]
This is used to enable an accelerator. Depending on the target architecture,
-kvm, xen, hax, hvf or tcg can be available. By default, tcg is used. If there is
+kvm, xen, hax, hvf, whpx or tcg can be available. By default, tcg is used. If there is
more than one accelerator specified, the next one is used if the previous one
fails to initialize.
@item kernel_irqchip=on|off
@@ -126,13 +126,13 @@ ETEXI
DEF("accel", HAS_ARG, QEMU_OPTION_accel,
"-accel [accel=]accelerator[,thread=single|multi]\n"
- " select accelerator (kvm, xen, hax, hvf or tcg; use 'help' for a list)\n"
+ " select accelerator (kvm, xen, hax, hvf, whpx or tcg; use 'help' for a list)\n"
" thread=single|multi (enable multi-threaded TCG)", QEMU_ARCH_ALL)
STEXI
@item -accel @var{name}[,prop=@var{value}[,...]]
@findex -accel
This is used to enable an accelerator. Depending on the target architecture,
-kvm, xen, hax, hvf or tcg can be available. By default, tcg is used. If there is
+kvm, xen, hax, hvf, whpx or tcg can be available. By default, tcg is used. If there is
more than one accelerator specified, the next one is used if the previous one
fails to initialize.
@table @option
Introduces the configure support for the new Windows Hypervisor Platform that allows for hypervisor acceleration from usermode components on the Windows platform. Signed-off-by: Justin Terry (VM) <juterry@microsoft.com> --- configure | 48 +++++++++++++++++++++++++++++++++++++++++++++++- qemu-options.hx | 8 ++++---- 2 files changed, 51 insertions(+), 5 deletions(-)