new file mode 100644
@@ -0,0 +1,182 @@
+/*
+ * QEMU model of the UART on the SiFive E300 and U500 series SOCs.
+ *
+ * Copyright (c) 2016 Stefan O'Rear
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "qemu/osdep.h"
+#include "qapi/error.h"
+#include "hw/sysbus.h"
+#include "chardev/char.h"
+#include "chardev/char-fe.h"
+#include "target/riscv/cpu.h"
+#include "hw/riscv/sifive_uart.h"
+
+/*
+ * Not yet implemented:
+ *
+ * Transmit FIFO using "qemu/fifo8.h"
+ * SIFIVE_UART_IE_TXWM interrupts
+ * SIFIVE_UART_IE_RXWM interrupts must honor fifo watermark
+ * Rx FIFO watermark interrupt trigger threshold
+ * Tx FIFO watermark interrupt trigger threshold.
+ */
+
+static void update_irq(SiFiveUARTState *s)
+{
+ int cond = 0;
+ if ((s->ie & SIFIVE_UART_IE_RXWM) && s->rx_fifo_len) {
+ cond = 1;
+ }
+ if (cond) {
+ qemu_irq_raise(s->irq);
+ } else {
+ qemu_irq_lower(s->irq);
+ }
+}
+
+static uint64_t
+uart_read(void *opaque, hwaddr addr, unsigned int size)
+{
+ SiFiveUARTState *s = opaque;
+ unsigned char r;
+ switch (addr) {
+ case SIFIVE_UART_RXFIFO:
+ if (s->rx_fifo_len) {
+ r = s->rx_fifo[0];
+ memmove(s->rx_fifo, s->rx_fifo + 1, s->rx_fifo_len - 1);
+ s->rx_fifo_len--;
+ qemu_chr_fe_accept_input(&s->chr);
+ update_irq(s);
+ return r;
+ }
+ return 0x80000000;
+
+ case SIFIVE_UART_TXFIFO:
+ return 0; /* Should check tx fifo */
+ case SIFIVE_UART_IE:
+ return s->ie;
+ case SIFIVE_UART_IP:
+ return s->rx_fifo_len ? SIFIVE_UART_IP_RXWM : 0;
+ case SIFIVE_UART_TXCTRL:
+ return s->txctrl;
+ case SIFIVE_UART_RXCTRL:
+ return s->rxctrl;
+ case SIFIVE_UART_DIV:
+ return s->div;
+ }
+
+ hw_error("%s: bad read: addr=0x%x\n",
+ __func__, (int)addr);
+ return 0;
+}
+
+static void
+uart_write(void *opaque, hwaddr addr,
+ uint64_t val64, unsigned int size)
+{
+ SiFiveUARTState *s = opaque;
+ uint32_t value = val64;
+ unsigned char ch = value;
+
+ switch (addr) {
+ case SIFIVE_UART_TXFIFO:
+ qemu_chr_fe_write(&s->chr, &ch, 1);
+ return;
+ case SIFIVE_UART_IE:
+ s->ie = val64;
+ update_irq(s);
+ return;
+ case SIFIVE_UART_TXCTRL:
+ s->txctrl = val64;
+ return;
+ case SIFIVE_UART_RXCTRL:
+ s->rxctrl = val64;
+ return;
+ case SIFIVE_UART_DIV:
+ s->div = val64;
+ return;
+ }
+ hw_error("%s: bad write: addr=0x%x v=0x%x\n",
+ __func__, (int)addr, (int)value);
+}
+
+static const MemoryRegionOps uart_ops = {
+ .read = uart_read,
+ .write = uart_write,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+ .valid = {
+ .min_access_size = 4,
+ .max_access_size = 4
+ }
+};
+
+static void uart_rx(void *opaque, const uint8_t *buf, int size)
+{
+ SiFiveUARTState *s = opaque;
+
+ /* Got a byte. */
+ if (s->rx_fifo_len >= sizeof(s->rx_fifo)) {
+ printf("WARNING: UART dropped char.\n");
+ return;
+ }
+ s->rx_fifo[s->rx_fifo_len++] = *buf;
+
+ update_irq(s);
+}
+
+static int uart_can_rx(void *opaque)
+{
+ SiFiveUARTState *s = opaque;
+
+ return s->rx_fifo_len < sizeof(s->rx_fifo);
+}
+
+static void uart_event(void *opaque, int event)
+{
+}
+
+static int uart_be_change(void *opaque)
+{
+ SiFiveUARTState *s = opaque;
+
+ qemu_chr_fe_set_handlers(&s->chr, uart_can_rx, uart_rx, uart_event,
+ uart_be_change, s, NULL, true);
+
+ return 0;
+}
+
+/*
+ * Create UART device.
+ */
+SiFiveUARTState *sifive_uart_create(MemoryRegion *address_space, hwaddr base,
+ Chardev *chr, qemu_irq irq)
+{
+ SiFiveUARTState *s = g_malloc0(sizeof(SiFiveUARTState));
+ s->irq = irq;
+ qemu_chr_fe_init(&s->chr, chr, &error_abort);
+ qemu_chr_fe_set_handlers(&s->chr, uart_can_rx, uart_rx, uart_event,
+ uart_be_change, s, NULL, true);
+ memory_region_init_io(&s->mmio, NULL, &uart_ops, s,
+ TYPE_SIFIVE_UART, SIFIVE_UART_MAX);
+ memory_region_add_subregion(address_space, base, &s->mmio);
+ return s;
+}
new file mode 100644
@@ -0,0 +1,76 @@
+/*
+ * SiFive UART interface
+ *
+ * Copyright (c) 2017 SiFive, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef HW_SIFIVE_UART_H
+#define HW_SIFIVE_UART_H
+
+enum {
+ SIFIVE_UART_TXFIFO = 0,
+ SIFIVE_UART_RXFIFO = 4,
+ SIFIVE_UART_TXCTRL = 8,
+ SIFIVE_UART_TXMARK = 10,
+ SIFIVE_UART_RXCTRL = 12,
+ SIFIVE_UART_RXMARK = 14,
+ SIFIVE_UART_IE = 16,
+ SIFIVE_UART_IP = 20,
+ SIFIVE_UART_DIV = 24,
+ SIFIVE_UART_MAX = 32
+};
+
+enum {
+ SIFIVE_UART_IE_TXWM = 1, /* Transmit watermark interrupt enable */
+ SIFIVE_UART_IE_RXWM = 2 /* Receive watermark interrupt enable */
+};
+
+enum {
+ SIFIVE_UART_IP_TXWM = 1, /* Transmit watermark interrupt pending */
+ SIFIVE_UART_IP_RXWM = 2 /* Receive watermark interrupt pending */
+};
+
+#define TYPE_SIFIVE_UART "riscv.sifive.uart"
+
+#define SIFIVE_UART(obj) \
+ OBJECT_CHECK(SiFiveUARTState, (obj), TYPE_SIFIVE_UART)
+
+typedef struct SiFiveUARTState {
+ /*< private >*/
+ SysBusDevice parent_obj;
+
+ /*< public >*/
+ qemu_irq irq;
+ MemoryRegion mmio;
+ CharBackend chr;
+ uint8_t rx_fifo[8];
+ unsigned int rx_fifo_len;
+ uint32_t ie;
+ uint32_t ip;
+ uint32_t txctrl;
+ uint32_t rxctrl;
+ uint32_t div;
+} SiFiveUARTState;
+
+SiFiveUARTState *sifive_uart_create(MemoryRegion *address_space, hwaddr base,
+ Chardev *chr, qemu_irq irq);
+
+#endif
QEMU model of the UART on the SiFive E300 and U500 series SOCs. BBL supports the SiFive UART for early console access via the SBI (Supervisor Binary Interface) and the linux kernel SBI console. The SiFive UART implements the pre qom legacy interface consistent with the 16550a UART in 'hw/char/serial.c'. Signed-off-by: Michael Clark <mjc@sifive.com> --- hw/riscv/sifive_uart.c | 182 +++++++++++++++++++++++++++++++++++++++++ include/hw/riscv/sifive_uart.h | 76 +++++++++++++++++ 2 files changed, 258 insertions(+) create mode 100644 hw/riscv/sifive_uart.c create mode 100644 include/hw/riscv/sifive_uart.h