new file mode 100644
@@ -0,0 +1,233 @@
+/*
+ * QEMU RISC-V Board Compatible with SiFive E300 SDK
+ *
+ * Copyright (c) 2017 SiFive, Inc.
+ *
+ * Provides a board compatible with the bsp in the SiFive E300 SDK:
+ *
+ * 0) UART
+ * 1) CLINT (Core Level Interruptor)
+ * 2) PLIC (Platform Level Interrupt Controller)
+ * 3) PRCI (Power, Reset, Clock, Interrupt)
+ * 4) Registers emulated as RAM: AON, GPIO, QSPI, PWM
+ * 5) Flash memory emulated as RAM
+ *
+ * The Mask ROM reset vector jumps to the flash payload at 0x2040_0000.
+ * The OTP ROM and Flash boot code will be emulated in a future version.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/log.h"
+#include "qemu/error-report.h"
+#include "qapi/error.h"
+#include "hw/hw.h"
+#include "hw/boards.h"
+#include "hw/loader.h"
+#include "hw/sysbus.h"
+#include "hw/char/serial.h"
+#include "target/riscv/cpu.h"
+#include "hw/riscv/riscv_hart.h"
+#include "hw/riscv/sifive_plic.h"
+#include "hw/riscv/sifive_clint.h"
+#include "hw/riscv/sifive_prci.h"
+#include "hw/riscv/sifive_uart.h"
+#include "hw/riscv/sifive_e300.h"
+#include "chardev/char.h"
+#include "sysemu/arch_init.h"
+#include "exec/address-spaces.h"
+#include "elf.h"
+
+static const struct MemmapEntry {
+ hwaddr base;
+ hwaddr size;
+} sifive_e300_memmap[] = {
+ [SIFIVE_E300_DEBUG] = { 0x0, 0x100 },
+ [SIFIVE_E300_MROM] = { 0x1000, 0x2000 },
+ [SIFIVE_E300_OTP] = { 0x20000, 0x2000 },
+ [SIFIVE_E300_CLINT] = { 0x2000000, 0x10000 },
+ [SIFIVE_E300_PLIC] = { 0xc000000, 0x4000000 },
+ [SIFIVE_E300_AON] = { 0x10000000, 0x8000 },
+ [SIFIVE_E300_PRCI] = { 0x10008000, 0x8000 },
+ [SIFIVE_E300_OTP_CTRL] = { 0x10010000, 0x1000 },
+ [SIFIVE_E300_GPIO0] = { 0x10012000, 0x1000 },
+ [SIFIVE_E300_UART0] = { 0x10013000, 0x1000 },
+ [SIFIVE_E300_QSPI0] = { 0x10014000, 0x1000 },
+ [SIFIVE_E300_PWM0] = { 0x10015000, 0x1000 },
+ [SIFIVE_E300_UART1] = { 0x10023000, 0x1000 },
+ [SIFIVE_E300_QSPI1] = { 0x10024000, 0x1000 },
+ [SIFIVE_E300_PWM1] = { 0x10025000, 0x1000 },
+ [SIFIVE_E300_QSPI2] = { 0x10034000, 0x1000 },
+ [SIFIVE_E300_PWM2] = { 0x10035000, 0x1000 },
+ [SIFIVE_E300_XIP] = { 0x20000000, 0x20000000 },
+ [SIFIVE_E300_DTIM] = { 0x80000000, 0x4000 }
+};
+
+static uint64_t identity_translate(void *opaque, uint64_t addr)
+{
+ return addr;
+}
+
+static uint64_t load_kernel(const char *kernel_filename)
+{
+ uint64_t kernel_entry, kernel_high;
+
+ if (load_elf(kernel_filename, identity_translate, NULL,
+ &kernel_entry, NULL, &kernel_high,
+ 0, ELF_MACHINE, 1, 0) < 0) {
+ error_report("qemu: could not load kernel '%s'", kernel_filename);
+ exit(1);
+ }
+ return kernel_entry;
+}
+
+static void sifive_mmio_emulate(MemoryRegion *parent, const char *name,
+ uintptr_t offset, uintptr_t length)
+{
+ MemoryRegion *mock_mmio = g_new(MemoryRegion, 1);
+ memory_region_init_ram(mock_mmio, NULL, name, length, &error_fatal);
+ memory_region_add_subregion(parent, offset, mock_mmio);
+}
+
+static void riscv_sifive_e300_init(MachineState *machine)
+{
+ const struct MemmapEntry *memmap = sifive_e300_memmap;
+
+ SiFiveE300State *s = g_new0(SiFiveE300State, 1);
+ MemoryRegion *sys_mem = get_system_memory();
+ MemoryRegion *main_mem = g_new(MemoryRegion, 1);
+ MemoryRegion *mask_rom = g_new(MemoryRegion, 1);
+ MemoryRegion *xip_mem = g_new(MemoryRegion, 1);
+
+ /* Initialize SOC */
+ object_initialize(&s->soc, sizeof(s->soc), TYPE_RISCV_HART_ARRAY);
+ object_property_add_child(OBJECT(machine), "soc", OBJECT(&s->soc),
+ &error_abort);
+ object_property_set_str(OBJECT(&s->soc), TYPE_RISCV_CPU_IMAC_PRIV_1_10,
+ "cpu-type", &error_abort);
+ object_property_set_int(OBJECT(&s->soc), smp_cpus, "num-harts",
+ &error_abort);
+ object_property_set_bool(OBJECT(&s->soc), true, "realized",
+ &error_abort);
+
+ /* Data Tightly Integrated Memory */
+ memory_region_init_ram(main_mem, NULL, "riscv.sifive.e300.ram",
+ memmap[SIFIVE_E300_DTIM].size, &error_fatal);
+ memory_region_add_subregion(sys_mem,
+ memmap[SIFIVE_E300_DTIM].base, main_mem);
+
+ /* Mask ROM */
+ memory_region_init_ram(mask_rom, NULL, "riscv.sifive.e300.mrom",
+ memmap[SIFIVE_E300_MROM].size, &error_fatal);
+ memory_region_add_subregion(sys_mem,
+ memmap[SIFIVE_E300_MROM].base, mask_rom);
+
+ /* MMIO */
+ s->plic = sifive_plic_create(memmap[SIFIVE_E300_PLIC].base,
+ (char *)SIFIVE_E300_PLIC_HART_CONFIG,
+ SIFIVE_E300_PLIC_NUM_SOURCES,
+ SIFIVE_E300_PLIC_NUM_PRIORITIES,
+ SIFIVE_E300_PLIC_PRIORITY_BASE,
+ SIFIVE_E300_PLIC_PENDING_BASE,
+ SIFIVE_E300_PLIC_ENABLE_BASE,
+ SIFIVE_E300_PLIC_ENABLE_STRIDE,
+ SIFIVE_E300_PLIC_CONTEXT_BASE,
+ SIFIVE_E300_PLIC_CONTEXT_STRIDE,
+ memmap[SIFIVE_E300_PLIC].size);
+ sifive_clint_create(memmap[SIFIVE_E300_CLINT].base,
+ memmap[SIFIVE_E300_CLINT].size, smp_cpus,
+ SIFIVE_SIP_BASE, SIFIVE_TIMECMP_BASE, SIFIVE_TIME_BASE);
+ sifive_mmio_emulate(sys_mem, "riscv.sifive.e300.aon",
+ memmap[SIFIVE_E300_AON].base, memmap[SIFIVE_E300_AON].size);
+ sifive_prci_create(memmap[SIFIVE_E300_PRCI].base);
+ sifive_mmio_emulate(sys_mem, "riscv.sifive.e300.gpio0",
+ memmap[SIFIVE_E300_GPIO0].base, memmap[SIFIVE_E300_GPIO0].size);
+ sifive_uart_create(sys_mem, memmap[SIFIVE_E300_UART0].base,
+ serial_hds[0], SIFIVE_PLIC(s->plic)->irqs[SIFIVE_E300_UART0_IRQ]);
+ sifive_mmio_emulate(sys_mem, "riscv.sifive.e300.qspi0",
+ memmap[SIFIVE_E300_QSPI0].base, memmap[SIFIVE_E300_QSPI0].size);
+ sifive_mmio_emulate(sys_mem, "riscv.sifive.e300.pwm0",
+ memmap[SIFIVE_E300_PWM0].base, memmap[SIFIVE_E300_PWM0].size);
+ /* sifive_uart_create(sys_mem, memmap[SIFIVE_E300_UART1].base,
+ serial_hds[1], SIFIVE_PLIC(s->plic)->irqs[SIFIVE_E300_UART1_IRQ]); */
+ sifive_mmio_emulate(sys_mem, "riscv.sifive.e300.qspi1",
+ memmap[SIFIVE_E300_QSPI1].base, memmap[SIFIVE_E300_QSPI1].size);
+ sifive_mmio_emulate(sys_mem, "riscv.sifive.e300.pwm1",
+ memmap[SIFIVE_E300_PWM1].base, memmap[SIFIVE_E300_PWM1].size);
+ sifive_mmio_emulate(sys_mem, "riscv.sifive.e300.qspi2",
+ memmap[SIFIVE_E300_QSPI2].base, memmap[SIFIVE_E300_QSPI2].size);
+ sifive_mmio_emulate(sys_mem, "riscv.sifive.e300.pwm2",
+ memmap[SIFIVE_E300_PWM2].base, memmap[SIFIVE_E300_PWM2].size);
+
+ /* Flash memory */
+ memory_region_init_ram(xip_mem, NULL, "riscv.sifive.e300.xip",
+ memmap[SIFIVE_E300_XIP].size, &error_fatal);
+ memory_region_set_readonly(xip_mem, true);
+ memory_region_add_subregion(sys_mem,
+ memmap[SIFIVE_E300_XIP].base, xip_mem);
+
+ /* Mask ROM reset vector */
+ uint32_t reset_vec[2] = {
+ 0x204002b7, /* 0x1000: lui t0,0x20400 */
+ 0x00028067, /* 0x1004: jr t0 */
+ };
+
+ /* copy in the reset vector */
+ cpu_physical_memory_write(0x1000, reset_vec, sizeof(reset_vec));
+ memory_region_set_readonly(mask_rom, true);
+
+ if (machine->kernel_filename) {
+ load_kernel(machine->kernel_filename);
+ }
+}
+
+static int riscv_sifive_e300_sysbus_device_init(SysBusDevice *sysbusdev)
+{
+ return 0;
+}
+
+static void riscv_sifive_e300_class_init(ObjectClass *klass, void *data)
+{
+ SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
+ k->init = riscv_sifive_e300_sysbus_device_init;
+}
+
+static const TypeInfo riscv_sifive_e300_device = {
+ .name = TYPE_SIFIVE_E300,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(SiFiveE300State),
+ .class_init = riscv_sifive_e300_class_init,
+};
+
+static void riscv_sifive_e300_machine_init(MachineClass *mc)
+{
+ mc->desc = "RISC-V Board compatible with SiFive E300 SDK";
+ mc->init = riscv_sifive_e300_init;
+ mc->max_cpus = 1;
+}
+
+DEFINE_MACHINE("sifive_e300", riscv_sifive_e300_machine_init)
+
+static void riscv_sifive_e300_register_types(void)
+{
+ type_register_static(&riscv_sifive_e300_device);
+}
+
+type_init(riscv_sifive_e300_register_types);
new file mode 100644
@@ -0,0 +1,79 @@
+/*
+ * SiFive E300 series machine interface
+ *
+ * Copyright (c) 2017 SiFive, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef HW_SIFIVE_E300_H
+#define HW_SIFIVE_E300_H
+
+#define TYPE_SIFIVE_E300 "riscv.sifive.e300"
+
+#define SIFIVE_E300(obj) \
+ OBJECT_CHECK(SiFiveE300State, (obj), TYPE_SIFIVE_E300)
+
+typedef struct SiFiveE300State {
+ /*< private >*/
+ SysBusDevice parent_obj;
+
+ /*< public >*/
+ RISCVHartArrayState soc;
+ DeviceState *plic;
+} SiFiveE300State;
+
+enum {
+ SIFIVE_E300_DEBUG,
+ SIFIVE_E300_MROM,
+ SIFIVE_E300_OTP,
+ SIFIVE_E300_CLINT,
+ SIFIVE_E300_PLIC,
+ SIFIVE_E300_AON,
+ SIFIVE_E300_PRCI,
+ SIFIVE_E300_OTP_CTRL,
+ SIFIVE_E300_GPIO0,
+ SIFIVE_E300_UART0,
+ SIFIVE_E300_QSPI0,
+ SIFIVE_E300_PWM0,
+ SIFIVE_E300_UART1,
+ SIFIVE_E300_QSPI1,
+ SIFIVE_E300_PWM1,
+ SIFIVE_E300_QSPI2,
+ SIFIVE_E300_PWM2,
+ SIFIVE_E300_XIP,
+ SIFIVE_E300_DTIM
+};
+
+enum {
+ SIFIVE_E300_UART0_IRQ = 3,
+ SIFIVE_E300_UART1_IRQ = 4
+};
+
+#define SIFIVE_E300_PLIC_HART_CONFIG "M"
+#define SIFIVE_E300_PLIC_NUM_SOURCES 127
+#define SIFIVE_E300_PLIC_NUM_PRIORITIES 7
+#define SIFIVE_E300_PLIC_PRIORITY_BASE 0x0
+#define SIFIVE_E300_PLIC_PENDING_BASE 0x1000
+#define SIFIVE_E300_PLIC_ENABLE_BASE 0x2000
+#define SIFIVE_E300_PLIC_ENABLE_STRIDE 0x80
+#define SIFIVE_E300_PLIC_CONTEXT_BASE 0x200000
+#define SIFIVE_E300_PLIC_CONTEXT_STRIDE 0x1000
+
+#endif
This provides a RISC-V Board compatible with the the SiFive E300 SDK. The following machine is implemented: - 'sifive_e300'; CLINT, PLIC, UART, AON, GPIO, QSPI, PWM Signed-off-by: Michael Clark <mjc@sifive.com> --- hw/riscv/sifive_e300.c | 233 +++++++++++++++++++++++++++++++++++++++++ include/hw/riscv/sifive_e300.h | 79 ++++++++++++++ 2 files changed, 312 insertions(+) create mode 100644 hw/riscv/sifive_e300.c create mode 100644 include/hw/riscv/sifive_e300.h