| Message ID | 1519934373-3629-3-git-send-email-stefanb@linux.vnet.ibm.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi On Thu, Mar 1, 2018 at 8:59 PM, Stefan Berger <stefanb@linux.vnet.ibm.com> wrote: > Extend the TPM TIS interface with state migration support. > > We need to synchronize with the backend thread to make sure that a command > being processed by the external TPM emulator has completed and its > response been received. > > Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> > --- > hw/tpm/tpm_tis.c | 54 +++++++++++++++++++++++++++++++++++++++++++++++++++++- > 1 file changed, 53 insertions(+), 1 deletion(-) > > diff --git a/hw/tpm/tpm_tis.c b/hw/tpm/tpm_tis.c > index 834eef7..5016d28 100644 > --- a/hw/tpm/tpm_tis.c > +++ b/hw/tpm/tpm_tis.c > @@ -902,9 +902,61 @@ static void tpm_tis_reset(DeviceState *dev) > tpm_backend_startup_tpm(s->be_driver, s->be_buffer_size); > } > > +/* persistent state handling */ > + > +static int tpm_tis_pre_save(void *opaque) > +{ > + TPMState *s = opaque; > + uint8_t locty = s->active_locty; > + > + DPRINTF("tpm_tis: suspend: locty = %d : rw_offset = %u\n", suspend -> pre_save ? > + locty, s->rw_offset); > +#ifdef DEBUG_TIS > + tpm_tis_dump_state(opaque, 0); > +#endif To avoid dead code, you could write: if (DEBUG_TIS) { ... } > + > + /* > + * Synchronize with backend completion. > + */ > + tpm_backend_finish_sync(s->be_driver); > + > + return 0; > +} > + > +static const VMStateDescription vmstate_locty = { > + .name = "loc", I would use a more descriptive name, such as "tpm-tis/locty" > + .version_id = 1, > + .minimum_version_id = 0, It's the first version, make it all 0. > + .minimum_version_id_old = 0, not needed > + .fields = (VMStateField[]) { > + VMSTATE_UINT32(state, TPMLocality), > + VMSTATE_UINT32(inte, TPMLocality), > + VMSTATE_UINT32(ints, TPMLocality), > + VMSTATE_UINT8(access, TPMLocality), > + VMSTATE_UINT32(sts, TPMLocality), > + VMSTATE_UINT32(iface_id, TPMLocality), > + VMSTATE_END_OF_LIST(), > + } > +}; > + > static const VMStateDescription vmstate_tpm_tis = { > .name = "tpm", It's time to use a more specific name "tpm-tis" ? > - .unmigratable = 1, > + .version_id = 1, > + .minimum_version_id = 0, It's the first version, make it all 0. > + .minimum_version_id_old = 0, not needed > + .pre_save = tpm_tis_pre_save, > + .fields = (VMStateField[]) { > + VMSTATE_BUFFER(buffer, TPMState), > + VMSTATE_UINT16(rw_offset, TPMState), > + VMSTATE_UINT8(active_locty, TPMState), > + VMSTATE_UINT8(aborting_locty, TPMState), > + VMSTATE_UINT8(next_locty, TPMState), > + > + VMSTATE_STRUCT_ARRAY(loc, TPMState, TPM_TIS_NUM_LOCALITIES, 1, > + vmstate_locty, TPMLocality), > + > + VMSTATE_END_OF_LIST() > + } > }; > > static Property tpm_tis_properties[] = { > -- > 2.5.5 > > looks good otherwise
Hi On Thu, Mar 1, 2018 at 8:59 PM, Stefan Berger <stefanb@linux.vnet.ibm.com> wrote: > Extend the TPM TIS interface with state migration support. > > We need to synchronize with the backend thread to make sure that a command > being processed by the external TPM emulator has completed and its > response been received. > > Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> > --- > hw/tpm/tpm_tis.c | 54 +++++++++++++++++++++++++++++++++++++++++++++++++++++- > 1 file changed, 53 insertions(+), 1 deletion(-) > > diff --git a/hw/tpm/tpm_tis.c b/hw/tpm/tpm_tis.c > index 834eef7..5016d28 100644 > --- a/hw/tpm/tpm_tis.c > +++ b/hw/tpm/tpm_tis.c > @@ -902,9 +902,61 @@ static void tpm_tis_reset(DeviceState *dev) > tpm_backend_startup_tpm(s->be_driver, s->be_buffer_size); > } > > +/* persistent state handling */ > + > +static int tpm_tis_pre_save(void *opaque) > +{ > + TPMState *s = opaque; > + uint8_t locty = s->active_locty; > + > + DPRINTF("tpm_tis: suspend: locty = %d : rw_offset = %u\n", > + locty, s->rw_offset); > +#ifdef DEBUG_TIS > + tpm_tis_dump_state(opaque, 0); > +#endif > + > + /* > + * Synchronize with backend completion. > + */ > + tpm_backend_finish_sync(s->be_driver); > + > + return 0; > +} > + > +static const VMStateDescription vmstate_locty = { > + .name = "loc", > + .version_id = 1, > + .minimum_version_id = 0, > + .minimum_version_id_old = 0, I don't understand the problem there is leaving all the version fields to 0, just like CRB. > + .fields = (VMStateField[]) { > + VMSTATE_UINT32(state, TPMLocality), > + VMSTATE_UINT32(inte, TPMLocality), > + VMSTATE_UINT32(ints, TPMLocality), > + VMSTATE_UINT8(access, TPMLocality), > + VMSTATE_UINT32(sts, TPMLocality), > + VMSTATE_UINT32(iface_id, TPMLocality), > + VMSTATE_END_OF_LIST(), > + } > +}; > + > static const VMStateDescription vmstate_tpm_tis = { > .name = "tpm", > - .unmigratable = 1, > + .version_id = 1, > + .minimum_version_id = 0, > + .minimum_version_id_old = 0, same If you remove the version fields: Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> > + .pre_save = tpm_tis_pre_save, > + .fields = (VMStateField[]) { > + VMSTATE_BUFFER(buffer, TPMState), > + VMSTATE_UINT16(rw_offset, TPMState), > + VMSTATE_UINT8(active_locty, TPMState), > + VMSTATE_UINT8(aborting_locty, TPMState), > + VMSTATE_UINT8(next_locty, TPMState), > + > + VMSTATE_STRUCT_ARRAY(loc, TPMState, TPM_TIS_NUM_LOCALITIES, 1, > + vmstate_locty, TPMLocality), > + > + VMSTATE_END_OF_LIST() > + } > }; > > static Property tpm_tis_properties[] = { > -- > 2.5.5 >
On 03/28/2018 11:41 AM, Marc-André Lureau wrote: > Hi > > On Thu, Mar 1, 2018 at 8:59 PM, Stefan Berger > <stefanb@linux.vnet.ibm.com> wrote: >> + >> +static const VMStateDescription vmstate_locty = { >> + .name = "loc", >> + .version_id = 1, >> + .minimum_version_id = 0, >> + .minimum_version_id_old = 0, > I don't understand the problem there is leaving all the version fields > to 0, just like CRB. > >> + .fields = (VMStateField[]) { >> + VMSTATE_UINT32(state, TPMLocality), >> + VMSTATE_UINT32(inte, TPMLocality), >> + VMSTATE_UINT32(ints, TPMLocality), >> + VMSTATE_UINT8(access, TPMLocality), >> + VMSTATE_UINT32(sts, TPMLocality), >> + VMSTATE_UINT32(iface_id, TPMLocality), >> + VMSTATE_END_OF_LIST(), >> + } >> +}; >> + >> static const VMStateDescription vmstate_tpm_tis = { >> .name = "tpm", >> - .unmigratable = 1, >> + .version_id = 1, >> + .minimum_version_id = 0, >> + .minimum_version_id_old = 0, > same > > If you remove the version fields: Reviewed-by: Marc-André Lureau > <marcandre.lureau@redhat.com> This is the error I got when setting .version_id = 0 (on both) and doing a localhost migration qemu-system-x86_64: Missing section footer for tpm-tis qemu-system-x86_64: load of migration failed: Invalid argument It must have something to do with the nesting invoked by VMSTATE_STRUCT_ARRAY(loc,...) below. > > > >> + .pre_save = tpm_tis_pre_save, >> + .fields = (VMStateField[]) { >> + VMSTATE_BUFFER(buffer, TPMState), >> + VMSTATE_UINT16(rw_offset, TPMState), >> + VMSTATE_UINT8(active_locty, TPMState), >> + VMSTATE_UINT8(aborting_locty, TPMState), >> + VMSTATE_UINT8(next_locty, TPMState), >> + >> + VMSTATE_STRUCT_ARRAY(loc, TPMState, TPM_TIS_NUM_LOCALITIES, 1, >> + vmstate_locty, TPMLocality), >> + >> + VMSTATE_END_OF_LIST() >> + } >> }; >> >> static Property tpm_tis_properties[] = { >> -- >> 2.5.5 >>
Hi On Thu, Mar 29, 2018 at 1:56 AM, Stefan Berger <stefanb@linux.vnet.ibm.com> wrote: > On 03/28/2018 11:41 AM, Marc-André Lureau wrote: >> >> Hi >> >> On Thu, Mar 1, 2018 at 8:59 PM, Stefan Berger >> <stefanb@linux.vnet.ibm.com> wrote: >>> >>> + >>> +static const VMStateDescription vmstate_locty = { >>> + .name = "loc", >>> + .version_id = 1, >>> + .minimum_version_id = 0, >>> + .minimum_version_id_old = 0, >> >> I don't understand the problem there is leaving all the version fields >> to 0, just like CRB. >> >>> + .fields = (VMStateField[]) { >>> + VMSTATE_UINT32(state, TPMLocality), >>> + VMSTATE_UINT32(inte, TPMLocality), >>> + VMSTATE_UINT32(ints, TPMLocality), >>> + VMSTATE_UINT8(access, TPMLocality), >>> + VMSTATE_UINT32(sts, TPMLocality), >>> + VMSTATE_UINT32(iface_id, TPMLocality), >>> + VMSTATE_END_OF_LIST(), >>> + } >>> +}; >>> + >>> static const VMStateDescription vmstate_tpm_tis = { >>> .name = "tpm", >>> - .unmigratable = 1, >>> + .version_id = 1, >>> + .minimum_version_id = 0, >>> + .minimum_version_id_old = 0, >> >> same >> >> If you remove the version fields: Reviewed-by: Marc-André Lureau >> <marcandre.lureau@redhat.com> > > > This is the error I got when setting .version_id = 0 (on both) and doing a > localhost migration > > qemu-system-x86_64: Missing section footer for tpm-tis > qemu-system-x86_64: load of migration failed: Invalid argument It's clearly not the most friendly error message, but I debugged it, you just have to specify the right version for VMSTATE_STRUCT_ARRAY: 0. VMSTATE_STRUCT_ARRAY(loc, TPMState, TPM_TIS_NUM_LOCALITIES, 0, vmstate_locty, TPMLocality), Then it all works with version 0 (or default value) thanks > > It must have something to do with the nesting invoked by > VMSTATE_STRUCT_ARRAY(loc,...) below. > > > > >> >> >> >>> + .pre_save = tpm_tis_pre_save, >>> + .fields = (VMStateField[]) { >>> + VMSTATE_BUFFER(buffer, TPMState), >>> + VMSTATE_UINT16(rw_offset, TPMState), >>> + VMSTATE_UINT8(active_locty, TPMState), >>> + VMSTATE_UINT8(aborting_locty, TPMState), >>> + VMSTATE_UINT8(next_locty, TPMState), >>> + >>> + VMSTATE_STRUCT_ARRAY(loc, TPMState, TPM_TIS_NUM_LOCALITIES, 1, >>> + vmstate_locty, TPMLocality), >>> + >>> + VMSTATE_END_OF_LIST() >>> + } >>> }; >>> >>> static Property tpm_tis_properties[] = { >>> -- >>> 2.5.5 >>> > >
On 03/29/2018 01:07 PM, Marc-André Lureau wrote: > Hi > > On Thu, Mar 29, 2018 at 1:56 AM, Stefan Berger > <stefanb@linux.vnet.ibm.com> wrote: >> On 03/28/2018 11:41 AM, Marc-André Lureau wrote: >>> Hi >>> >>> On Thu, Mar 1, 2018 at 8:59 PM, Stefan Berger >>> <stefanb@linux.vnet.ibm.com> wrote: >>>> + >>>> +static const VMStateDescription vmstate_locty = { >>>> + .name = "loc", >>>> + .version_id = 1, >>>> + .minimum_version_id = 0, >>>> + .minimum_version_id_old = 0, >>> I don't understand the problem there is leaving all the version fields >>> to 0, just like CRB. >>> >>>> + .fields = (VMStateField[]) { >>>> + VMSTATE_UINT32(state, TPMLocality), >>>> + VMSTATE_UINT32(inte, TPMLocality), >>>> + VMSTATE_UINT32(ints, TPMLocality), >>>> + VMSTATE_UINT8(access, TPMLocality), >>>> + VMSTATE_UINT32(sts, TPMLocality), >>>> + VMSTATE_UINT32(iface_id, TPMLocality), >>>> + VMSTATE_END_OF_LIST(), >>>> + } >>>> +}; >>>> + >>>> static const VMStateDescription vmstate_tpm_tis = { >>>> .name = "tpm", >>>> - .unmigratable = 1, >>>> + .version_id = 1, >>>> + .minimum_version_id = 0, >>>> + .minimum_version_id_old = 0, >>> same >>> >>> If you remove the version fields: Reviewed-by: Marc-André Lureau >>> <marcandre.lureau@redhat.com> >> >> This is the error I got when setting .version_id = 0 (on both) and doing a >> localhost migration >> >> qemu-system-x86_64: Missing section footer for tpm-tis >> qemu-system-x86_64: load of migration failed: Invalid argument > It's clearly not the most friendly error message, but I debugged it, > you just have to specify the right version for VMSTATE_STRUCT_ARRAY: > 0. > VMSTATE_STRUCT_ARRAY(loc, TPMState, TPM_TIS_NUM_LOCALITIES, 0, > vmstate_locty, TPMLocality), > > Then it all works with version 0 (or default value) > > thanks Thanks.
diff --git a/hw/tpm/tpm_tis.c b/hw/tpm/tpm_tis.c index 834eef7..5016d28 100644 --- a/hw/tpm/tpm_tis.c +++ b/hw/tpm/tpm_tis.c @@ -902,9 +902,61 @@ static void tpm_tis_reset(DeviceState *dev) tpm_backend_startup_tpm(s->be_driver, s->be_buffer_size); } +/* persistent state handling */ + +static int tpm_tis_pre_save(void *opaque) +{ + TPMState *s = opaque; + uint8_t locty = s->active_locty; + + DPRINTF("tpm_tis: suspend: locty = %d : rw_offset = %u\n", + locty, s->rw_offset); +#ifdef DEBUG_TIS + tpm_tis_dump_state(opaque, 0); +#endif + + /* + * Synchronize with backend completion. + */ + tpm_backend_finish_sync(s->be_driver); + + return 0; +} + +static const VMStateDescription vmstate_locty = { + .name = "loc", + .version_id = 1, + .minimum_version_id = 0, + .minimum_version_id_old = 0, + .fields = (VMStateField[]) { + VMSTATE_UINT32(state, TPMLocality), + VMSTATE_UINT32(inte, TPMLocality), + VMSTATE_UINT32(ints, TPMLocality), + VMSTATE_UINT8(access, TPMLocality), + VMSTATE_UINT32(sts, TPMLocality), + VMSTATE_UINT32(iface_id, TPMLocality), + VMSTATE_END_OF_LIST(), + } +}; + static const VMStateDescription vmstate_tpm_tis = { .name = "tpm", - .unmigratable = 1, + .version_id = 1, + .minimum_version_id = 0, + .minimum_version_id_old = 0, + .pre_save = tpm_tis_pre_save, + .fields = (VMStateField[]) { + VMSTATE_BUFFER(buffer, TPMState), + VMSTATE_UINT16(rw_offset, TPMState), + VMSTATE_UINT8(active_locty, TPMState), + VMSTATE_UINT8(aborting_locty, TPMState), + VMSTATE_UINT8(next_locty, TPMState), + + VMSTATE_STRUCT_ARRAY(loc, TPMState, TPM_TIS_NUM_LOCALITIES, 1, + vmstate_locty, TPMLocality), + + VMSTATE_END_OF_LIST() + } }; static Property tpm_tis_properties[] = {
Extend the TPM TIS interface with state migration support. We need to synchronize with the backend thread to make sure that a command being processed by the external TPM emulator has completed and its response been received. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> --- hw/tpm/tpm_tis.c | 54 +++++++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 53 insertions(+), 1 deletion(-)