Message ID | 1538426899-17560-1-git-send-email-george.kennedy@oracle.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | lsi: Reselection needed to remove pending commands from queue | expand |
On 01/10/2018 22:48, George Kennedy wrote: > Under heavy IO (e.g. fio) the queue is not checked frequently enough for > pending commands. As a result some pending commands are timed out by the > linux sym53c8xx driver, which sends SCSI Abort messages for the timed out > commands. The SCSI Abort messages result in linux errors, which show up > in /var/log/messages. > > e.g. > sd 0:0:3:0: [sdd] tag#33 ABORT operation started > scsi target0:0:3: control msgout: > 80 20 47 d > sd 0:0:3:0: ABORT operation complete. > scsi target0:0:4: message d sent on bad reselection > > Add a deadline along with the command when it is added to the queue. > When the current command completes, check the queue for pending commands > that have exceeded the deadline and if so, simulate a Wait Reselect > to handle the pending commands on the queue. > > When a Wait Reselect is needed, intercept and save the current DMA Scripts > Ptr (DSP) contents and load it instead with the pointer to the Reselection > Scripts. When Reselection has completed, restore the original DSP contents. > > Signed-off-by: George Kennedy <george.kennedy@oracle.com> I don't understand the timeout. Why can't the SCRIPTS part of the patch just complete the WAIT RESELECT command in lsi_reselect? This would also avoid the SCRIPTS_LOAD_AND_STORE hack. Likewise, storing the resel_dsp should be done in lsi_wait_reselect. The way you are checking SCRIPTS_WAIT_RESELECT is specific to the Linux firmware that has an offset of 0 in the Wait Reselect command. s->resel_dsp should be set to s->dnad, which is already initialized correctly where lsi_wait_reselect is called. Thanks, > --- > hw/scsi/lsi53c895a.c | 94 ++++++++++++++++++++++++++++++++++++++++++++++++++-- > 1 file changed, 91 insertions(+), 3 deletions(-) > > diff --git a/hw/scsi/lsi53c895a.c b/hw/scsi/lsi53c895a.c > index 996b406..1e38ceb 100644 > --- a/hw/scsi/lsi53c895a.c > +++ b/hw/scsi/lsi53c895a.c > @@ -198,6 +198,7 @@ typedef struct lsi_request { > uint32_t dma_len; > uint8_t *dma_buf; > uint32_t pending; > + uint64_t deadline; > int out; > QTAILQ_ENTRY(lsi_request) next; > } lsi_request; > @@ -232,6 +233,9 @@ typedef struct { > int command_complete; > QTAILQ_HEAD(, lsi_request) queue; > lsi_request *current; > + int want_resel; /* need resel to handle queued completed cmds */ > + uint32_t resel_dsp; /* DMA Scripts Ptr (DSP) of reselection scsi scripts */ > + uint32_t next_dsp; /* if want_resel, will be loaded with above */ > > uint32_t dsa; > uint32_t temp; > @@ -310,6 +314,44 @@ static inline int lsi_irq_on_rsl(LSIState *s) > { > return (s->sien0 & LSI_SIST0_RSL) && (s->scid & LSI_SCID_RRE); > } > +#ifdef DEBUG_LSI > +static void showq(LSIState *s) > +{ > + lsi_request *p; > + int count = 0; > + > + QTAILQ_FOREACH(p, &s->queue, next) { > + DPRINTF("%d: tag=%x, pending=%x, deadline=%lx\n", > + count++, p->tag, p->pending, p->deadline); > + } > +} > + > +static int get_pending_count(LSIState *s) > +{ > + lsi_request *p; > + int count = 0; > + > + QTAILQ_FOREACH(p, &s->queue, next) { > + if (p->pending) { > + count++; > + } > + } > + return count; > +} > +#endif > +static int pending_past_deadline(LSIState *s) > +{ > + lsi_request *p; > + > + QTAILQ_FOREACH(p, &s->queue, next) { > + if (p->pending) { > + if (qemu_clock_get_ns(QEMU_CLOCK_REALTIME) > p->deadline) { > + return 1; > + } > + } > + } > + return 0; > +} > > static void lsi_soft_reset(LSIState *s) > { > @@ -634,15 +676,22 @@ static void lsi_do_dma(LSIState *s, int out) > } > } > > +/* Max time a completed command can be on the queue before Reselection needed */ > +#define LSI_DEADLINE 1000 > > /* Add a command to the queue. */ > static void lsi_queue_command(LSIState *s) > { > lsi_request *p = s->current; > + uint64_t timeout_ms = LSI_DEADLINE; > > DPRINTF("Queueing tag=0x%x\n", p->tag); > assert(s->current != NULL); > assert(s->current->dma_len == 0); > + > + p->deadline = qemu_clock_get_ns(QEMU_CLOCK_REALTIME) + > + timeout_ms * 1000000ULL; > + > QTAILQ_INSERT_TAIL(&s->queue, s->current, next); > s->current = NULL; > > @@ -668,6 +717,8 @@ static void lsi_reselect(LSIState *s, lsi_request *p) > > assert(s->current == NULL); > QTAILQ_REMOVE(&s->queue, p, next); > + DPRINTF("lsi_reselect: p->tag=%x, p->pending=%x, p->deadline=%lx\n", > + p->tag, p->pending, p->deadline); > s->current = p; > > id = (p->tag >> 8) & 0xf; > @@ -775,6 +826,10 @@ static void lsi_command_complete(SCSIRequest *req, uint32_t status, size_t resid > lsi_request_free(s, s->current); > scsi_req_unref(req); > } > + if (pending_past_deadline(s)) { > + DPRINTF("lsi_command_complete: want_resel = 1\n"); > + s->want_resel = 1; > + } > lsi_resume_script(s); > } > > @@ -987,7 +1042,7 @@ static void lsi_do_msgout(LSIState *s) > s->select_tag |= lsi_get_msgbyte(s) | LSI_TAG_VALID; > break; > case 0x22: /* ORDERED queue */ > - BADF("ORDERED queue not implemented\n"); > + DPRINTF("ORDERED queue not implemented\n"); > s->select_tag |= lsi_get_msgbyte(s) | LSI_TAG_VALID; > break; > case 0x0d: > @@ -1075,8 +1130,17 @@ static void lsi_memcpy(LSIState *s, uint32_t dest, uint32_t src, int count) > static void lsi_wait_reselect(LSIState *s) > { > lsi_request *p; > +#ifdef DEBUG_LSI > + int pending_count = get_pending_count(s); > > - DPRINTF("Wait Reselect\n"); > + if (pending_count) { > + DPRINTF("Wait Reselect, s->current=%p, pending_count=%d\n", > + s->current, pending_count); > + showq(s); > + } > +#endif > + if (s->current) > + return; > > QTAILQ_FOREACH(p, &s->queue, next) { > if (p->pending) { > @@ -1089,6 +1153,9 @@ static void lsi_wait_reselect(LSIState *s) > } > } > > +#define SCRIPTS_LOAD_AND_STORE 0xe2340004 > +#define SCRIPTS_WAIT_RESELECT 0x50000000 > + > static void lsi_execute_script(LSIState *s) > { > PCIDevice *pci_dev = PCI_DEVICE(s); > @@ -1096,10 +1163,16 @@ static void lsi_execute_script(LSIState *s) > uint32_t addr, addr_high; > int opcode; > int insn_processed = 0; > + uint32_t save_dsp = 0; > > s->istat1 |= LSI_ISTAT1_SRUN; > again: > insn_processed++; > + if (s->next_dsp) { > + save_dsp = s->dsp; > + s->dsp = s->next_dsp; > + DPRINTF("lsi_execute_script: setting up for wait_reselection...\n"); > + } > insn = read_dword(s, s->dsp); > if (!insn) { > /* If we receive an empty opcode increment the DSP by 4 bytes > @@ -1107,9 +1180,18 @@ again: > s->dsp += 4; > goto again; > } > + if (s->want_resel && s->resel_dsp && (insn == SCRIPTS_LOAD_AND_STORE)) { > + /* Reselection follows Load and Store */ > + DPRINTF("lsi_execute_script: detects want_resel...\n"); > + s->next_dsp = s->resel_dsp; > + s->want_resel = 0; > + } > addr = read_dword(s, s->dsp + 4); > addr_high = 0; > - DPRINTF("SCRIPTS dsp=%08x opcode %08x arg %08x\n", s->dsp, insn, addr); > + if ((insn == SCRIPTS_WAIT_RESELECT) && !s->resel_dsp) { > + s->resel_dsp = s->dsp; /* save resel dsp for later use */ > + DPRINTF("lsi_execute_script: s->resel_dsp=%x\n", s->resel_dsp); > + } > s->dsps = addr; > s->dcmd = insn >> 24; > s->dsp += 8; > @@ -1273,7 +1355,13 @@ again: > s->scntl1 &= ~LSI_SCNTL1_CON; > break; > case 2: /* Wait Reselect */ > + DPRINTF("Wait Reselect\n"); > if (!lsi_irq_on_rsl(s)) { > + if (save_dsp) { > + DPRINTF("Restore original s->dsp=%x\n", save_dsp); > + s->dsp = save_dsp; > + save_dsp = s->next_dsp = 0; > + } > lsi_wait_reselect(s); > } > break; >
diff --git a/hw/scsi/lsi53c895a.c b/hw/scsi/lsi53c895a.c index 996b406..1e38ceb 100644 --- a/hw/scsi/lsi53c895a.c +++ b/hw/scsi/lsi53c895a.c @@ -198,6 +198,7 @@ typedef struct lsi_request { uint32_t dma_len; uint8_t *dma_buf; uint32_t pending; + uint64_t deadline; int out; QTAILQ_ENTRY(lsi_request) next; } lsi_request; @@ -232,6 +233,9 @@ typedef struct { int command_complete; QTAILQ_HEAD(, lsi_request) queue; lsi_request *current; + int want_resel; /* need resel to handle queued completed cmds */ + uint32_t resel_dsp; /* DMA Scripts Ptr (DSP) of reselection scsi scripts */ + uint32_t next_dsp; /* if want_resel, will be loaded with above */ uint32_t dsa; uint32_t temp; @@ -310,6 +314,44 @@ static inline int lsi_irq_on_rsl(LSIState *s) { return (s->sien0 & LSI_SIST0_RSL) && (s->scid & LSI_SCID_RRE); } +#ifdef DEBUG_LSI +static void showq(LSIState *s) +{ + lsi_request *p; + int count = 0; + + QTAILQ_FOREACH(p, &s->queue, next) { + DPRINTF("%d: tag=%x, pending=%x, deadline=%lx\n", + count++, p->tag, p->pending, p->deadline); + } +} + +static int get_pending_count(LSIState *s) +{ + lsi_request *p; + int count = 0; + + QTAILQ_FOREACH(p, &s->queue, next) { + if (p->pending) { + count++; + } + } + return count; +} +#endif +static int pending_past_deadline(LSIState *s) +{ + lsi_request *p; + + QTAILQ_FOREACH(p, &s->queue, next) { + if (p->pending) { + if (qemu_clock_get_ns(QEMU_CLOCK_REALTIME) > p->deadline) { + return 1; + } + } + } + return 0; +} static void lsi_soft_reset(LSIState *s) { @@ -634,15 +676,22 @@ static void lsi_do_dma(LSIState *s, int out) } } +/* Max time a completed command can be on the queue before Reselection needed */ +#define LSI_DEADLINE 1000 /* Add a command to the queue. */ static void lsi_queue_command(LSIState *s) { lsi_request *p = s->current; + uint64_t timeout_ms = LSI_DEADLINE; DPRINTF("Queueing tag=0x%x\n", p->tag); assert(s->current != NULL); assert(s->current->dma_len == 0); + + p->deadline = qemu_clock_get_ns(QEMU_CLOCK_REALTIME) + + timeout_ms * 1000000ULL; + QTAILQ_INSERT_TAIL(&s->queue, s->current, next); s->current = NULL; @@ -668,6 +717,8 @@ static void lsi_reselect(LSIState *s, lsi_request *p) assert(s->current == NULL); QTAILQ_REMOVE(&s->queue, p, next); + DPRINTF("lsi_reselect: p->tag=%x, p->pending=%x, p->deadline=%lx\n", + p->tag, p->pending, p->deadline); s->current = p; id = (p->tag >> 8) & 0xf; @@ -775,6 +826,10 @@ static void lsi_command_complete(SCSIRequest *req, uint32_t status, size_t resid lsi_request_free(s, s->current); scsi_req_unref(req); } + if (pending_past_deadline(s)) { + DPRINTF("lsi_command_complete: want_resel = 1\n"); + s->want_resel = 1; + } lsi_resume_script(s); } @@ -987,7 +1042,7 @@ static void lsi_do_msgout(LSIState *s) s->select_tag |= lsi_get_msgbyte(s) | LSI_TAG_VALID; break; case 0x22: /* ORDERED queue */ - BADF("ORDERED queue not implemented\n"); + DPRINTF("ORDERED queue not implemented\n"); s->select_tag |= lsi_get_msgbyte(s) | LSI_TAG_VALID; break; case 0x0d: @@ -1075,8 +1130,17 @@ static void lsi_memcpy(LSIState *s, uint32_t dest, uint32_t src, int count) static void lsi_wait_reselect(LSIState *s) { lsi_request *p; +#ifdef DEBUG_LSI + int pending_count = get_pending_count(s); - DPRINTF("Wait Reselect\n"); + if (pending_count) { + DPRINTF("Wait Reselect, s->current=%p, pending_count=%d\n", + s->current, pending_count); + showq(s); + } +#endif + if (s->current) + return; QTAILQ_FOREACH(p, &s->queue, next) { if (p->pending) { @@ -1089,6 +1153,9 @@ static void lsi_wait_reselect(LSIState *s) } } +#define SCRIPTS_LOAD_AND_STORE 0xe2340004 +#define SCRIPTS_WAIT_RESELECT 0x50000000 + static void lsi_execute_script(LSIState *s) { PCIDevice *pci_dev = PCI_DEVICE(s); @@ -1096,10 +1163,16 @@ static void lsi_execute_script(LSIState *s) uint32_t addr, addr_high; int opcode; int insn_processed = 0; + uint32_t save_dsp = 0; s->istat1 |= LSI_ISTAT1_SRUN; again: insn_processed++; + if (s->next_dsp) { + save_dsp = s->dsp; + s->dsp = s->next_dsp; + DPRINTF("lsi_execute_script: setting up for wait_reselection...\n"); + } insn = read_dword(s, s->dsp); if (!insn) { /* If we receive an empty opcode increment the DSP by 4 bytes @@ -1107,9 +1180,18 @@ again: s->dsp += 4; goto again; } + if (s->want_resel && s->resel_dsp && (insn == SCRIPTS_LOAD_AND_STORE)) { + /* Reselection follows Load and Store */ + DPRINTF("lsi_execute_script: detects want_resel...\n"); + s->next_dsp = s->resel_dsp; + s->want_resel = 0; + } addr = read_dword(s, s->dsp + 4); addr_high = 0; - DPRINTF("SCRIPTS dsp=%08x opcode %08x arg %08x\n", s->dsp, insn, addr); + if ((insn == SCRIPTS_WAIT_RESELECT) && !s->resel_dsp) { + s->resel_dsp = s->dsp; /* save resel dsp for later use */ + DPRINTF("lsi_execute_script: s->resel_dsp=%x\n", s->resel_dsp); + } s->dsps = addr; s->dcmd = insn >> 24; s->dsp += 8; @@ -1273,7 +1355,13 @@ again: s->scntl1 &= ~LSI_SCNTL1_CON; break; case 2: /* Wait Reselect */ + DPRINTF("Wait Reselect\n"); if (!lsi_irq_on_rsl(s)) { + if (save_dsp) { + DPRINTF("Restore original s->dsp=%x\n", save_dsp); + s->dsp = save_dsp; + save_dsp = s->next_dsp = 0; + } lsi_wait_reselect(s); } break;
Under heavy IO (e.g. fio) the queue is not checked frequently enough for pending commands. As a result some pending commands are timed out by the linux sym53c8xx driver, which sends SCSI Abort messages for the timed out commands. The SCSI Abort messages result in linux errors, which show up in /var/log/messages. e.g. sd 0:0:3:0: [sdd] tag#33 ABORT operation started scsi target0:0:3: control msgout: 80 20 47 d sd 0:0:3:0: ABORT operation complete. scsi target0:0:4: message d sent on bad reselection Add a deadline along with the command when it is added to the queue. When the current command completes, check the queue for pending commands that have exceeded the deadline and if so, simulate a Wait Reselect to handle the pending commands on the queue. When a Wait Reselect is needed, intercept and save the current DMA Scripts Ptr (DSP) contents and load it instead with the pointer to the Reselection Scripts. When Reselection has completed, restore the original DSP contents. Signed-off-by: George Kennedy <george.kennedy@oracle.com> --- hw/scsi/lsi53c895a.c | 94 ++++++++++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 91 insertions(+), 3 deletions(-)