[2/5] Add save and load functions for VFIO PCI devices

Commit Message

Kirti Wankhede Nov. 20, 2018, 8:39 p.m. UTC

Save and restore with MSIX type is not tested.

Signed-off-by: Kirti Wankhede <[e-mail]>
Reviewed-by: Neo Jia <[e-mail]>
---
 hw/vfio/pci.c | 95 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 hw/vfio/pci.h | 29 ++++++++++++++++++
 2 files changed, 124 insertions(+)

Comments

Peter Xu Nov. 21, 2018, 5:32 a.m. UTC | #1

On Wed, Nov 21, 2018 at 02:09:40AM +0530, Kirti Wankhede wrote:
> Save and restore with MSIX type is not tested.
> 
> Signed-off-by: Kirti Wankhede <[e-mail]>
> Reviewed-by: Neo Jia <[e-mail]>
> ---
>  hw/vfio/pci.c | 95 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>  hw/vfio/pci.h | 29 ++++++++++++++++++
>  2 files changed, 124 insertions(+)
> 
> diff --git a/hw/vfio/pci.c b/hw/vfio/pci.c
> index 6cbb8fa0549d..72daf1a358a0 100644
> --- a/hw/vfio/pci.c
> +++ b/hw/vfio/pci.c
> @@ -1234,6 +1234,101 @@ void vfio_pci_write_config(PCIDevice *pdev,
>      }
>  }
>  
> +void vfio_pci_save_config(VFIODevice *vbasedev, QEMUFile *f)
> +{
> +    VFIOPCIDevice *vdev = container_of(vbasedev, VFIOPCIDevice, vbasedev);
> +    PCIDevice *pdev = &vdev->pdev;
> +    int i;
> +
> +    for (i = 0; i < PCI_ROM_SLOT; i++) {
> +        uint32_t bar;
> +
> +        bar = pci_default_read_config(pdev, PCI_BASE_ADDRESS_0 + i * 4, 4);
> +        qemu_put_be32(f, bar);

Is it possible to avoid calling qemu_put_*() directly from vfio code?
E.g., using VMStateDescription and hooks like pre_save, post_load and
etc.  Then we update all the data into the data structure and leave
all the rest of IO operations to general migration framework.

Regards,

Patch

diff --git a/hw/vfio/pci.c b/hw/vfio/pci.c
index 6cbb8fa0549d..72daf1a358a0 100644
--- a/hw/vfio/pci.c
+++ b/hw/vfio/pci.c
@@ -1234,6 +1234,101 @@  void vfio_pci_write_config(PCIDevice *pdev,
     }
 }
 
+void vfio_pci_save_config(VFIODevice *vbasedev, QEMUFile *f)
+{
+    VFIOPCIDevice *vdev = container_of(vbasedev, VFIOPCIDevice, vbasedev);
+    PCIDevice *pdev = &vdev->pdev;
+    int i;
+
+    for (i = 0; i < PCI_ROM_SLOT; i++) {
+        uint32_t bar;
+
+        bar = pci_default_read_config(pdev, PCI_BASE_ADDRESS_0 + i * 4, 4);
+        qemu_put_be32(f, bar);
+    }
+
+    qemu_put_be32(f, vdev->interrupt);
+    if (vdev->interrupt == VFIO_INT_MSI) {
+        uint32_t msi_flags, msi_addr_lo, msi_addr_hi = 0, msi_data;
+        bool msi_64bit;
+
+        msi_flags = pci_default_read_config(pdev, pdev->msi_cap + PCI_MSI_FLAGS,
+                                            2);
+        msi_64bit = (msi_flags & PCI_MSI_FLAGS_64BIT);
+
+        msi_addr_lo = pci_default_read_config(pdev,
+                                         pdev->msi_cap + PCI_MSI_ADDRESS_LO, 4);
+        qemu_put_be32(f, msi_addr_lo);
+
+        if (msi_64bit) {
+            msi_addr_hi = pci_default_read_config(pdev,
+                                             pdev->msi_cap + PCI_MSI_ADDRESS_HI,
+                                             4);
+        }
+        qemu_put_be32(f, msi_addr_hi);
+
+        msi_data = pci_default_read_config(pdev,
+                pdev->msi_cap + (msi_64bit ? PCI_MSI_DATA_64 : PCI_MSI_DATA_32),
+                2);
+        qemu_put_be32(f, msi_data);
+    } else if (vdev->interrupt == VFIO_INT_MSIX) {
+        msix_save(pdev, f);
+    }
+}
+
+void vfio_pci_load_config(VFIODevice *vbasedev, QEMUFile *f)
+{
+    VFIOPCIDevice *vdev = container_of(vbasedev, VFIOPCIDevice, vbasedev);
+    PCIDevice *pdev = &vdev->pdev;
+    uint32_t pci_cmd, interrupt_type;
+    uint32_t msi_flags, msi_addr_lo, msi_addr_hi = 0, msi_data;
+    bool msi_64bit;
+    int i;
+
+    /* retore pci bar configuration */
+    pci_cmd = pci_default_read_config(pdev, PCI_COMMAND, 2);
+    vfio_pci_write_config(pdev, PCI_COMMAND,
+                        pci_cmd & (!(PCI_COMMAND_IO | PCI_COMMAND_MEMORY)), 2);
+    for (i = 0; i < PCI_ROM_SLOT; i++) {
+        uint32_t bar = qemu_get_be32(f);
+
+        vfio_pci_write_config(pdev, PCI_BASE_ADDRESS_0 + i * 4, bar, 4);
+    }
+    vfio_pci_write_config(pdev, PCI_COMMAND,
+                          pci_cmd | PCI_COMMAND_IO | PCI_COMMAND_MEMORY, 2);
+
+    interrupt_type = qemu_get_be32(f);
+
+    if (interrupt_type == VFIO_INT_MSI) {
+        /* restore msi configuration */
+        msi_flags = pci_default_read_config(pdev,
+                                            pdev->msi_cap + PCI_MSI_FLAGS, 2);
+        msi_64bit = (msi_flags & PCI_MSI_FLAGS_64BIT);
+
+        vfio_pci_write_config(&vdev->pdev, pdev->msi_cap + PCI_MSI_FLAGS,
+                              msi_flags & (!PCI_MSI_FLAGS_ENABLE), 2);
+
+        msi_addr_lo = qemu_get_be32(f);
+        vfio_pci_write_config(pdev, pdev->msi_cap + PCI_MSI_ADDRESS_LO,
+                              msi_addr_lo, 4);
+
+        msi_addr_hi = qemu_get_be32(f);
+        if (msi_64bit) {
+            vfio_pci_write_config(pdev, pdev->msi_cap + PCI_MSI_ADDRESS_HI,
+                                  msi_addr_hi, 4);
+        }
+        msi_data = qemu_get_be32(f);
+        vfio_pci_write_config(pdev,
+                pdev->msi_cap + (msi_64bit ? PCI_MSI_DATA_64 : PCI_MSI_DATA_32),
+                msi_data, 2);
+
+        vfio_pci_write_config(&vdev->pdev, pdev->msi_cap + PCI_MSI_FLAGS,
+                              msi_flags | PCI_MSI_FLAGS_ENABLE, 2);
+    } else if (vdev->interrupt == VFIO_INT_MSIX) {
+        msix_load(pdev, f);
+    }
+}
+
 /*
  * Interrupt setup
  */
diff --git a/hw/vfio/pci.h b/hw/vfio/pci.h
index 52b065421a68..890d77d66a6b 100644
--- a/hw/vfio/pci.h
+++ b/hw/vfio/pci.h
@@ -20,6 +20,7 @@ 
 #include "qemu/queue.h"
 #include "qemu/timer.h"
 
+#ifdef CONFIG_LINUX
 #define PCI_ANY_ID (~0)
 
 struct VFIOPCIDevice;
@@ -198,4 +199,32 @@  void vfio_display_reset(VFIOPCIDevice *vdev);
 int vfio_display_probe(VFIOPCIDevice *vdev, Error **errp);
 void vfio_display_finalize(VFIOPCIDevice *vdev);
 
+void vfio_pci_save_config(VFIODevice *vbasedev, QEMUFile *f);
+void vfio_pci_load_config(VFIODevice *vbasedev, QEMUFile *f);
+
+static inline Object *vfio_pci_get_object(VFIODevice *vbasedev)
+{
+    VFIOPCIDevice *vdev = container_of(vbasedev, VFIOPCIDevice, vbasedev);
+
+    return OBJECT(vdev);
+}
+
+#else
+static inline void vfio_pci_save_config(VFIODevice *vbasedev, QEMUFile *f)
+{
+    g_assert(false);
+}
+
+static inline void vfio_pci_load_config(VFIODevice *vbasedev, QEMUFile *f)
+{
+    g_assert(false);
+}
+
+static inline Object *vfio_pci_get_object(VFIODevice *vbasedev)
+{
+    return NULL;
+}
+
+#endif
+
 #endif /* HW_VFIO_VFIO_PCI_H */