@@ -9,8 +9,8 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#ifndef VFIO_H
-#define VFIO_H
+#ifndef _UAPIVFIO_H
+#define _UAPIVFIO_H
#include <linux/types.h>
#include <linux/ioctl.h>
@@ -303,6 +303,56 @@ struct vfio_region_info_cap_type {
#define VFIO_REGION_SUBTYPE_INTEL_IGD_HOST_CFG (2)
#define VFIO_REGION_SUBTYPE_INTEL_IGD_LPC_CFG (3)
+#define VFIO_REGION_TYPE_GFX (1)
+#define VFIO_REGION_SUBTYPE_GFX_EDID (1)
+
+/**
+ * struct vfio_region_gfx_edid - EDID region layout.
+ *
+ * Set display link state and EDID blob.
+ *
+ * The EDID blob has monitor information such as brand, name, serial
+ * number, physical size, supported video modes and more.
+ *
+ * This special region allows userspace (typically qemu) set a virtual
+ * EDID for the virtual monitor, which allows a flexible display
+ * configuration.
+ *
+ * For the edid blob spec look here:
+ * https://en.wikipedia.org/wiki/Extended_Display_Identification_Data
+ *
+ * On linux systems you can find the EDID blob in sysfs:
+ * /sys/class/drm/${card}/${connector}/edid
+ *
+ * You can use the edid-decode ulility (comes with xorg-x11-utils) to
+ * decode the EDID blob.
+ *
+ * @edid_offset: location of the edid blob, relative to the
+ * start of the region (readonly).
+ * @edid_max_size: max size of the edid blob (readonly).
+ * @edid_size: actual edid size (read/write).
+ * @link_state: display link state (read/write).
+ * VFIO_DEVICE_GFX_LINK_STATE_UP: Monitor is turned on.
+ * VFIO_DEVICE_GFX_LINK_STATE_DOWN: Monitor is turned off.
+ * @max_xres: max display width (0 == no limitation, readonly).
+ * @max_yres: max display height (0 == no limitation, readonly).
+ *
+ * EDID update protocol:
+ * (1) set link-state to down.
+ * (2) update edid blob and size.
+ * (3) set link-state to up.
+ */
+struct vfio_region_gfx_edid {
+ __u32 edid_offset;
+ __u32 edid_max_size;
+ __u32 edid_size;
+ __u32 max_xres;
+ __u32 max_yres;
+ __u32 link_state;
+#define VFIO_DEVICE_GFX_LINK_STATE_UP 1
+#define VFIO_DEVICE_GFX_LINK_STATE_DOWN 2
+};
+
/*
* The MSIX mappable capability informs that MSIX data of a BAR can be mmapped
* which allows direct access to non-MSIX registers which happened to be within
@@ -619,6 +669,15 @@ struct vfio_iommu_type1_info {
__u32 flags;
#define VFIO_IOMMU_INFO_PGSIZES (1 << 0) /* supported page sizes info */
__u64 iova_pgsizes; /* Bitmap of supported page sizes */
+#define VFIO_IOMMU_INFO_CAPABILITIES (1 << 1) /* support capabilities info */
+ __u64 cap_offset; /* Offset within info struct of first cap */
+};
+
+#define VFIO_IOMMU_INFO_CAP_DMA 1
+struct vfio_iommu_cap_dma {
+ struct vfio_info_cap_header header;
+ __u64 dma_start;
+ __u64 dma_end;
};
#define VFIO_IOMMU_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 12)
@@ -818,4 +877,4 @@ struct vfio_iommu_spapr_tce_remove {
/* ***************************************************************** */
-#endif /* VFIO_H */
+#endif /* _UAPIVFIO_H */
This is a place holder for VFIO.h as changed by the Linux patch associated with this QEMU series. Signed-off-by: Pierre Morel <pmorel@linux.ibm.com> --- linux-headers/linux/vfio.h | 65 +++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 62 insertions(+), 3 deletions(-)