diff mbox

[v6,12/13] misc: Introduce ZynqMP IOU SLCR

Message ID 1f1c046dab32038cae9cde7a3ed9b93863f3b3cb.1463093051.git.alistair.francis@xilinx.com (mailing list archive)
State New, archived
Headers show

Commit Message

Alistair Francis May 12, 2016, 10:46 p.m. UTC
From: Peter Crosthwaite <peter.crosthwaite@xilinx.com>

IOU = I/O Unit
SLCR = System Level Control Registers

This IP is a misc collections of control registers that switch various
properties of system IPs. Currently the only thing implemented is the
SD_SLOTTYPE control (implemented as a GPIO output).

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
---

 hw/misc/Makefile.objs                  |   1 +
 hw/misc/xlnx-zynqmp-iou-slcr.c         | 115 +++++++++++++++++++++++++++++++++
 include/hw/misc/xlnx-zynqmp-iou-slcr.h |  47 ++++++++++++++
 3 files changed, 163 insertions(+)
 create mode 100644 hw/misc/xlnx-zynqmp-iou-slcr.c
 create mode 100644 include/hw/misc/xlnx-zynqmp-iou-slcr.h
diff mbox

Patch

diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs
index 93f9528..d772c50 100644
--- a/hw/misc/Makefile.objs
+++ b/hw/misc/Makefile.objs
@@ -42,6 +42,7 @@  obj-$(CONFIG_RASPI) += bcm2835_property.o
 obj-$(CONFIG_SLAVIO) += slavio_misc.o
 obj-$(CONFIG_ZYNQ) += zynq_slcr.o
 obj-$(CONFIG_ZYNQ) += zynq-xadc.o
+obj-$(CONFIG_ZYNQ) += xlnx-zynqmp-iou-slcr.o
 obj-$(CONFIG_STM32F2XX_SYSCFG) += stm32f2xx_syscfg.o
 obj-$(CONFIG_MIPS_CPS) += mips_cmgcr.o
 obj-$(CONFIG_MIPS_CPS) += mips_cpc.o
diff --git a/hw/misc/xlnx-zynqmp-iou-slcr.c b/hw/misc/xlnx-zynqmp-iou-slcr.c
new file mode 100644
index 0000000..00b617e
--- /dev/null
+++ b/hw/misc/xlnx-zynqmp-iou-slcr.c
@@ -0,0 +1,115 @@ 
+/*
+ * Xilinx ZynqMP IOU System Level Control Registers (SLCR)
+ *
+ * Copyright (c) 2013 Xilinx Inc
+ * Copyright (c) 2013 Peter Crosthwaite <peter.crosthwaite@xilinx.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "qemu/osdep.h"
+#include "hw/misc/xlnx-zynqmp-iou-slcr.h"
+
+#ifndef XLNX_ZYNQMP_IOU_SLCR_ERR_DEBUG
+#define XLNX_ZYNQMP_IOU_SLCR_ERR_DEBUG 0
+#endif
+
+REG32(SD_SLOTTYPE, 0x310)
+    #define R_SD_SLOTTYPE_RSVD       0xffff7ffe
+
+static const RegisterAccessInfo xlnx_zynqmp_iou_slcr_regs_info[] = {
+    {   .name = "SD Slot TYPE",             .decode.addr = A_SD_SLOTTYPE,
+            .rsvd = R_SD_SLOTTYPE_RSVD,
+            .gpios = (RegisterGPIOMapping []) {
+                { .name = "SD0_SLOTTYPE",   .bit_pos = 0  },
+                { .name = "SD1_SLOTTYPE",   .bit_pos = 15 },
+                {},
+            }
+    }
+    /* FIXME: Complete device model */
+};
+
+static void xlnx_zynqmp_iou_slcr_reset(DeviceState *dev)
+{
+    XlnxZynqMPIOUSLCR *s = XLNX_ZYNQMP_IOU_SLCR(dev);
+    int i;
+
+    for (i = 0; i < XLNX_ZYNQ_MP_IOU_SLCR_R_MAX; ++i) {
+        register_reset(&s->regs_info[i]);
+    }
+}
+
+static const MemoryRegionOps xlnx_zynqmp_iou_slcr_ops = {
+    .read = register_read_memory_le,
+    .write = register_write_memory_le,
+    .endianness = DEVICE_LITTLE_ENDIAN,
+    .valid = {
+        .min_access_size = 4,
+        .max_access_size = 4,
+    }
+};
+
+static void xlnx_zynqmp_iou_slcr_init(Object *obj)
+{
+    XlnxZynqMPIOUSLCR *s = XLNX_ZYNQMP_IOU_SLCR(obj);
+
+    memory_region_init(&s->iomem, obj, "MMIO", XLNX_ZYNQ_MP_IOU_SLCR_R_MAX * 4);
+    register_init_block32(DEVICE(obj), xlnx_zynqmp_iou_slcr_regs_info,
+                          ARRAY_SIZE(xlnx_zynqmp_iou_slcr_regs_info),
+                          s->regs_info, s->regs, &s->iomem,
+                          &xlnx_zynqmp_iou_slcr_ops,
+                          XLNX_ZYNQMP_IOU_SLCR_ERR_DEBUG,
+                          XLNX_ZYNQ_MP_IOU_SLCR_R_MAX);
+    sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->iomem);
+}
+
+static const VMStateDescription vmstate_xlnx_zynqmp_iou_slcr = {
+    .name = "xlnx_zynqmp_iou_slcr",
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .minimum_version_id_old = 1,
+    .fields = (VMStateField[]) {
+        VMSTATE_UINT32_ARRAY(regs, XlnxZynqMPIOUSLCR,
+                             XLNX_ZYNQ_MP_IOU_SLCR_R_MAX),
+        VMSTATE_END_OF_LIST(),
+    }
+};
+
+static void xlnx_zynqmp_iou_slcr_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+
+    dc->reset = xlnx_zynqmp_iou_slcr_reset;
+    dc->vmsd = &vmstate_xlnx_zynqmp_iou_slcr;
+}
+
+static const TypeInfo xlnx_zynqmp_iou_slcr_info = {
+    .name          = TYPE_XLNX_ZYNQMP_IOU_SLCR,
+    .parent        = TYPE_SYS_BUS_DEVICE,
+    .instance_size = sizeof(XlnxZynqMPIOUSLCR),
+    .class_init    = xlnx_zynqmp_iou_slcr_class_init,
+    .instance_init = xlnx_zynqmp_iou_slcr_init,
+};
+
+static void xlnx_zynqmp_iou_slcr_register_types(void)
+{
+    type_register_static(&xlnx_zynqmp_iou_slcr_info);
+}
+
+type_init(xlnx_zynqmp_iou_slcr_register_types)
diff --git a/include/hw/misc/xlnx-zynqmp-iou-slcr.h b/include/hw/misc/xlnx-zynqmp-iou-slcr.h
new file mode 100644
index 0000000..b3bcb19
--- /dev/null
+++ b/include/hw/misc/xlnx-zynqmp-iou-slcr.h
@@ -0,0 +1,47 @@ 
+/*
+ * Xilinx ZynqMP IOU system level control registers (SLCR)
+ *
+ * Copyright (c) 2013 Xilinx Inc
+ * Copyright (c) 2013 Peter Crosthwaite <peter.crosthwaite@xilinx.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "hw/sysbus.h"
+#include "hw/register.h"
+
+#define TYPE_XLNX_ZYNQMP_IOU_SLCR "xlnx_zynqmp-iou-slcr"
+
+#define XLNX_ZYNQMP_IOU_SLCR(obj) \
+     OBJECT_CHECK(XlnxZynqMPIOUSLCR, (obj), TYPE_XLNX_ZYNQMP_IOU_SLCR)
+
+#define XLNX_ZYNQ_MP_IOU_SLCR_R_MAX (0x314 / 4)
+
+typedef struct XlnxZynqMPIOUSLCR XlnxZynqMPIOUSLCR;
+
+struct XlnxZynqMPIOUSLCR {
+    /*< private >*/
+    SysBusDevice busdev;
+
+    /*< public >*/
+    MemoryRegion iomem;
+
+    uint32_t regs[XLNX_ZYNQ_MP_IOU_SLCR_R_MAX];
+    RegisterInfo regs_info[XLNX_ZYNQ_MP_IOU_SLCR_R_MAX];
+};