[v2,3/7] intel_iommu: pass whole remapped addresses to apic

Commit Message

Radim Krčmář Sept. 29, 2016, 11:23 a.m. UTC

The MMIO interface to APIC only allowed 8 bit addresses, which is not
enough for 32 bit addresses from EIM remapping.
Intel stored upper 24 bits in the high MSI address, so use the same
technique. The technique is also used in KVM MSI interface.
Other APICs are unlikely to handle those upper bits.

Signed-off-by: Radim Krčmář <[e-mail]>
---
v2: fix build with enabled DEBUG_INTEL_IOMMU [Peter]
---
 hw/i386/intel_iommu.c | 21 +++++++++------------
 1 file changed, 9 insertions(+), 12 deletions(-)

Patch

diff --git a/hw/i386/intel_iommu.c b/hw/i386/intel_iommu.c
index 9f4e64af1ad5..c39b62b898d8 100644
--- a/hw/i386/intel_iommu.c
+++ b/hw/i386/intel_iommu.c
@@ -31,6 +31,7 @@ 
 #include "hw/i386/x86-iommu.h"
 #include "hw/pci-host/q35.h"
 #include "sysemu/kvm.h"
+#include "hw/i386/apic_internal.h"
 
 /*#define DEBUG_INTEL_IOMMU*/
 #ifdef DEBUG_INTEL_IOMMU
@@ -279,18 +280,17 @@  static void vtd_update_iotlb(IntelIOMMUState *s, uint16_t source_id,
 static void vtd_generate_interrupt(IntelIOMMUState *s, hwaddr mesg_addr_reg,
                                    hwaddr mesg_data_reg)
 {
-    hwaddr addr;
-    uint32_t data;
+    MSIMessage msi;
 
     assert(mesg_data_reg < DMAR_REG_SIZE);
     assert(mesg_addr_reg < DMAR_REG_SIZE);
 
-    addr = vtd_get_long_raw(s, mesg_addr_reg);
-    data = vtd_get_long_raw(s, mesg_data_reg);
+    msi.address = vtd_get_long_raw(s, mesg_addr_reg);
+    msi.data = vtd_get_long_raw(s, mesg_data_reg);
 
-    VTD_DPRINTF(FLOG, "msi: addr 0x%"PRIx64 " data 0x%"PRIx32, addr, data);
-    address_space_stl_le(&address_space_memory, addr, data,
-                         MEMTXATTRS_UNSPECIFIED, NULL);
+    VTD_DPRINTF(FLOG, "msi: addr 0x%"PRIx64 " data 0x%"PRIx32,
+                msi.address, msi.data);
+    apic_get_class()->send_msi(&msi);
 }
 
 /* Generate a fault event to software via MSI if conditions are met.
@@ -2133,6 +2133,7 @@  static void vtd_generate_msi_message(VTDIrq *irq, MSIMessage *msg_out)
     msg.dest_mode = irq->dest_mode;
     msg.redir_hint = irq->redir_hint;
     msg.dest = irq->dest;
+    msg.__addr_hi = irq->dest & 0xffffff00;
     msg.__addr_head = cpu_to_le32(0xfee);
     /* Keep this from original MSI address bits */
     msg.__not_used = irq->msi_addr_last_bits;
@@ -2281,11 +2282,7 @@  static MemTxResult vtd_mem_ir_write(void *opaque, hwaddr addr,
                 " for device sid 0x%04x",
                 to.address, to.data, sid);
 
-    if (dma_memory_write(&address_space_memory, to.address,
-                         &to.data, size)) {
-        VTD_DPRINTF(GENERAL, "error: fail to write 0x%"PRIx64
-                    " value 0x%"PRIx32, to.address, to.data);
-    }
+    apic_get_class()->send_msi(&to);
 
     return MEMTX_OK;
 }