diff mbox

[v5,4/6] block: convert ThrottleGroup to object with QOM

Message ID 20170818031019.3723-5-el13635@mail.ntua.gr (mailing list archive)
State New, archived
Headers show

Commit Message

Manos Pitsidianakis Aug. 18, 2017, 3:10 a.m. UTC
ThrottleGroup is converted to an object. This will allow the future
throttle block filter drive easy creation and configuration of throttle
groups in QMP and cli.

A new QAPI struct, ThrottleLimits, is introduced to provide a shared
struct for all throttle configuration needs in QMP.

ThrottleGroups can be created via CLI as
    -object throttle-group,id=foo,x-iops-total=100,x-..
where x-* are individual limit properties. Since we can't add non-scalar
properties in -object this interface must be used instead. However,
setting these properties must be disabled after initialization because
certain combinations of limits are forbidden and thus configuration
changes should be done in one transaction. The individual properties
will go away when support for non-scalar values in CLI is implemented
and thus are marked as experimental.

ThrottleGroup also has a `limits` property that uses the ThrottleLimits
struct.  It can be used to create ThrottleGroups or set the
configuration in existing groups as follows:

{ "execute": "object-add",
  "arguments": {
    "qom-type": "throttle-group",
    "id": "foo",
    "props" : {
      "limits": {
          "iops-total": 100
      }
    }
  }
}
{ "execute" : "qom-set",
    "arguments" : {
        "path" : "foo",
        "property" : "limits",
        "value" : {
            "iops-total" : 99
        }
    }
}

This also means a group's configuration can be fetched with qom-get.

ThrottleGroups can be anonymous which means they can't get accessed by
other users ie they will always be units instead of group (Because they
have one ThrottleGroupMember).

Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
---
 qapi/block-core.json            |  48 +++++
 include/block/throttle-groups.h |   3 +
 include/qemu/throttle-options.h |  59 ++++--
 include/qemu/throttle.h         |   3 +
 block/throttle-groups.c         | 421 ++++++++++++++++++++++++++++++++++++----
 tests/test-throttle.c           |   1 +
 util/throttle.c                 | 151 ++++++++++++++
 7 files changed, 626 insertions(+), 60 deletions(-)

Comments

Alberto Garcia Aug. 18, 2017, 1:05 p.m. UTC | #1
On Fri 18 Aug 2017 05:10:17 AM CEST, Manos Pitsidianakis wrote:

>   * If no ThrottleGroup is found with the given name a new one is
>   * created.
>   *
> - * @name: the name of the ThrottleGroup
> + * This function edits throttle_groups and must be called under the global
> + * mutex.
> + *
> + * @name: the name of the ThrottleGroup, NULL means a new anonymous group will
> + *        be created.
>   * @ret:  the ThrottleState member of the ThrottleGroup
>   */
>  ThrottleState *throttle_group_incref(const char *name)

If we're not going to have anonymous groups in the end this patch needs
changes (name == NULL is no longer allowed).

> +/* This function edits throttle_groups and must be called under the global
> + * mutex */
> +static void throttle_group_obj_complete(UserCreatable *obj, Error **errp)
> +{
> +    ThrottleGroup *tg = THROTTLE_GROUP(obj), *iter;
> +    ThrottleConfig *cfg = &tg->ts.cfg;
> +
> +    /* set group name to object id if it exists */
> +    if (!tg->name && tg->parent_obj.parent) {
> +        tg->name = object_get_canonical_path_component(OBJECT(obj));
> +    }
> +
> +    if (tg->name) {
> +        /* error if name is duplicate */
> +        QTAILQ_FOREACH(iter, &throttle_groups, list) {
> +            if (!g_strcmp0(tg->name, iter->name) && tg != iter) {

I'm just nitpicking here :) but if you change this and put 'tg != iter'
first you'll save one unnecessary string comparison.

> +                error_setg(errp, "A group with this name already exists");
> +                return;
> +            }
> +        }
> +    }
> +
> +    /* unfix buckets to check validity */
> +    throttle_get_config(&tg->ts, cfg);
> +    if (!throttle_is_valid(cfg, errp)) {
> +        return;
> +    }
> +    /* fix buckets again */
> +    throttle_config(&tg->ts, tg->clock_type, cfg);

throttle_get_config(ts, cfg) makes a copy of the existing configuration,
but the cfg pointer that you are passing already points to the existing
configuration, so in practice you are doing

    *(ts->cfg) = *(ts->cfg);
    throttle_unfix_bucket(...);

and since you "unfixed" the configuration, then you need undo the whole
thing by setting the config again:

    *(ts->cfg) = *(ts->cfg);
    throttle_fix_bucket(...);

You should declare a local ThrottleConfig variable, copy the config
there, and run throttle_is_valid() on that copy. The final
throttle_config() call is unnecessary.

Once the patches I sent yesterday are merged we'll be able to skip the
throttle_get_config() call and do throttle_is_valid(&tg->ts.cfg, errp)
directly.

> +static void throttle_group_set(Object *obj, Visitor *v, const char * name,
> +                               void *opaque, Error **errp)
> +
> +{
> +    ThrottleGroup *tg = THROTTLE_GROUP(obj);
> +    ThrottleConfig cfg;
> +    ThrottleParamInfo *info = opaque;
> +    Error *local_err = NULL;
> +    int64_t value;
> +
> +    /* If we have finished initialization, don't accept individual property
> +     * changes through QOM. Throttle configuration limits must be set in one
> +     * transaction, as certain combinations are invalid.
> +     */
> +    if (tg->is_initialized) {
> +        error_setg(&local_err, "Property cannot be set after initialization");
> +        goto ret;
> +    }
> +
> +    visit_type_int64(v, name, &value, &local_err);
> +    if (local_err) {
> +        goto ret;
> +    }
> +    if (value < 0) {
> +        error_setg(&local_err, "Property values cannot be negative");
> +        goto ret;
> +    }
> +
> +    cfg = tg->ts.cfg;
> +    switch (info->data_type) {
> +    case UINT64:
> +        {
> +            uint64_t *field = (void *)&cfg.buckets[info->type] + info->offset;
> +            *field = value;
> +        }
> +        break;
> +    case DOUBLE:
> +        {
> +            double *field = (void *)&cfg.buckets[info->type] + info->offset;
> +            *field = value;
> +        }
> +        break;
> +    case UNSIGNED:
> +        {
> +            if (value > UINT_MAX) {
> +                error_setg(&local_err, "%s value must be in the"
> +                                       "range [0, %u]", info->name, UINT_MAX);
> +                goto ret;
> +            }
> +            unsigned *field = (void *)&cfg.buckets[info->type] + info->offset;
> +            *field = value;
> +        }
> +    }
> +
> +    tg->ts.cfg = cfg;

There's a bit of black magic here :) you have a user-defined enumeration
(UNSIGNED, DOUBLE, UINT64) to identify C types and I'm worried about
what happens if the data types of LeakyBucket change, will we be able to
detect the problem?

Out of the blue I can think of the following alternative:

   - There's 6 different buckets (we have BucketType listing them)

   - There's 3 values we can set in each bucket (max, avg,
     burst_length). For those we can have an internal enumeration
     (probably with one additional value for iops-size).

   - In the 'properties' array, for each property we know its category
     (and I mean: avg, max, burst-lenght, iops-size) and the bucket
     where they belong.

   - In throttle_group_set() the switch could be something like this:

     switch (info->category) {
        case THROTTLE_VALUE_AVG:
           cfg->buckets[info->bkt_type].avg = value;
           break;
        case THROTTLE_VALUE_MAX:
           cfg->buckets[info->bkt_type].max = value;
           break;
        case THROTTLE_VALUE_BURST_LENGTH:
           /* Code here to check that value <= UINT_MAX */
           cfg->buckets[info->bkt_type].iops_length = value;
           break;
        case THROTTLE_VALUE_IOPS_SIZE:
           cfg->op_size = value;
     } 

> +static void throttle_group_get(Object *obj, Visitor *v, const char *name,
> +                               void *opaque, Error **errp)

And the same approach here, of course.

> +static void throttle_group_set_limits(Object *obj, Visitor *v,
> +                                      const char *name, void *opaque,
> +                                      Error **errp)
> +
> +{
> +    ThrottleGroup *tg = THROTTLE_GROUP(obj);
> +    ThrottleConfig cfg;
> +    ThrottleLimits *arg = NULL;
> +    Error *local_err = NULL;
> +
> +    arg = g_new0(ThrottleLimits, 1);

Do you need to allocate ThrottleLimits in the heap?

> +static void throttle_group_get_limits(Object *obj, Visitor *v,
> +                                      const char *name, void *opaque,
> +                                      Error **errp)
> +{
> +    ThrottleGroup *tg = THROTTLE_GROUP(obj);
> +    ThrottleConfig cfg;
> +    ThrottleLimits *arg = NULL;
> +
> +    qemu_mutex_lock(&tg->lock);
> +    throttle_get_config(&tg->ts, &cfg);
> +    qemu_mutex_unlock(&tg->lock);
> +
> +    arg = g_new0(ThrottleLimits, 1);
> +    throttle_config_to_limits(&cfg, arg);
> +
> +    visit_type_ThrottleLimits(v, name, &arg, errp);
> +    g_free(arg);

Same question here.

Berto
Manos Pitsidianakis Aug. 19, 2017, 7:08 a.m. UTC | #2
On Fri, Aug 18, 2017 at 03:05:31PM +0200, Alberto Garcia wrote:
>On Fri 18 Aug 2017 05:10:17 AM CEST, Manos Pitsidianakis wrote:
>
>>   * If no ThrottleGroup is found with the given name a new one is
>>   * created.
>>   *
>> - * @name: the name of the ThrottleGroup
>> + * This function edits throttle_groups and must be called under the global
>> + * mutex.
>> + *
>> + * @name: the name of the ThrottleGroup, NULL means a new anonymous group will
>> + *        be created.
>>   * @ret:  the ThrottleState member of the ThrottleGroup
>>   */
>>  ThrottleState *throttle_group_incref(const char *name)
>
>If we're not going to have anonymous groups in the end this patch needs
>changes (name == NULL is no longer allowed).
>
>> +/* This function edits throttle_groups and must be called under the global
>> + * mutex */
>> +static void throttle_group_obj_complete(UserCreatable *obj, Error **errp)
>> +{
>> +    ThrottleGroup *tg = THROTTLE_GROUP(obj), *iter;
>> +    ThrottleConfig *cfg = &tg->ts.cfg;
>> +
>> +    /* set group name to object id if it exists */
>> +    if (!tg->name && tg->parent_obj.parent) {
>> +        tg->name = object_get_canonical_path_component(OBJECT(obj));
>> +    }
>> +
>> +    if (tg->name) {
>> +        /* error if name is duplicate */
>> +        QTAILQ_FOREACH(iter, &throttle_groups, list) {
>> +            if (!g_strcmp0(tg->name, iter->name) && tg != iter) {
>
>I'm just nitpicking here :) but if you change this and put 'tg != iter'
>first you'll save one unnecessary string comparison.

Only in the case where tg == iter, otherwise you have one unnecessary 
pointer comparison for every other group.
>
>> +                error_setg(errp, "A group with this name already exists");
>> +                return;
>> +            }
>> +        }
>> +    }
>> +
>> +    /* unfix buckets to check validity */
>> +    throttle_get_config(&tg->ts, cfg);
>> +    if (!throttle_is_valid(cfg, errp)) {
>> +        return;
>> +    }
>> +    /* fix buckets again */
>> +    throttle_config(&tg->ts, tg->clock_type, cfg);
>
>throttle_get_config(ts, cfg) makes a copy of the existing configuration,
>but the cfg pointer that you are passing already points to the existing
>configuration, so in practice you are doing
>
>    *(ts->cfg) = *(ts->cfg);
>    throttle_unfix_bucket(...);
>
>and since you "unfixed" the configuration, then you need undo the whole
>thing by setting the config again:
>
>    *(ts->cfg) = *(ts->cfg);
>    throttle_fix_bucket(...);
>
>You should declare a local ThrottleConfig variable, copy the config
>there, and run throttle_is_valid() on that copy. The final
>throttle_config() call is unnecessary.

I figured I didn't have to make an extra copy but this looks bad in 
retrospect

>
>Once the patches I sent yesterday are merged we'll be able to skip the
>throttle_get_config() call and do throttle_is_valid(&tg->ts.cfg, errp)
>directly.
>
>> +static void throttle_group_set(Object *obj, Visitor *v, const char * name,
>> +                               void *opaque, Error **errp)
>> +
>> +{
>> +    ThrottleGroup *tg = THROTTLE_GROUP(obj);
>> +    ThrottleConfig cfg;
>> +    ThrottleParamInfo *info = opaque;
>> +    Error *local_err = NULL;
>> +    int64_t value;
>> +
>> +    /* If we have finished initialization, don't accept individual property
>> +     * changes through QOM. Throttle configuration limits must be set in one
>> +     * transaction, as certain combinations are invalid.
>> +     */
>> +    if (tg->is_initialized) {
>> +        error_setg(&local_err, "Property cannot be set after initialization");
>> +        goto ret;
>> +    }
>> +
>> +    visit_type_int64(v, name, &value, &local_err);
>> +    if (local_err) {
>> +        goto ret;
>> +    }
>> +    if (value < 0) {
>> +        error_setg(&local_err, "Property values cannot be negative");
>> +        goto ret;
>> +    }
>> +
>> +    cfg = tg->ts.cfg;
>> +    switch (info->data_type) {
>> +    case UINT64:
>> +        {
>> +            uint64_t *field = (void *)&cfg.buckets[info->type] + info->offset;
>> +            *field = value;
>> +        }
>> +        break;
>> +    case DOUBLE:
>> +        {
>> +            double *field = (void *)&cfg.buckets[info->type] + info->offset;
>> +            *field = value;
>> +        }
>> +        break;
>> +    case UNSIGNED:
>> +        {
>> +            if (value > UINT_MAX) {
>> +                error_setg(&local_err, "%s value must be in the"
>> +                                       "range [0, %u]", info->name, UINT_MAX);
>> +                goto ret;
>> +            }
>> +            unsigned *field = (void *)&cfg.buckets[info->type] + info->offset;
>> +            *field = value;
>> +        }
>> +    }
>> +
>> +    tg->ts.cfg = cfg;
>
>There's a bit of black magic here :)

This offset business is indeed black magic! And university makes you 
think the world runs on ML and Haskell...

>you have a user-defined enumeration
>(UNSIGNED, DOUBLE, UINT64) to identify C types and I'm worried about
>what happens if the data types of LeakyBucket change, will we be able to
>detect the problem?
>
>Out of the blue I can think of the following alternative:
>
>   - There's 6 different buckets (we have BucketType listing them)
>
>   - There's 3 values we can set in each bucket (max, avg,
>     burst_length). For those we can have an internal enumeration
>     (probably with one additional value for iops-size).
>
>   - In the 'properties' array, for each property we know its category
>     (and I mean: avg, max, burst-lenght, iops-size) and the bucket
>     where they belong.
>
>   - In throttle_group_set() the switch could be something like this:
>
>     switch (info->category) {
>        case THROTTLE_VALUE_AVG:
>           cfg->buckets[info->bkt_type].avg = value;
>           break;
>        case THROTTLE_VALUE_MAX:
>           cfg->buckets[info->bkt_type].max = value;
>           break;
>        case THROTTLE_VALUE_BURST_LENGTH:
>           /* Code here to check that value <= UINT_MAX */
>           cfg->buckets[info->bkt_type].iops_length = value;
>           break;
>        case THROTTLE_VALUE_IOPS_SIZE:
>           cfg->op_size = value;
>     }

I don't think that solves the type problem, since C uses coercion.  For 
example if hypothetically a double changes to uint in the future, 
`value` will not be checked for overflow and the compiler would just 
convert it to uint implicitly.  An academic solution would be to use a 
strongly typed language!
>
>> +static void throttle_group_get(Object *obj, Visitor *v, const char *name,
>> +                               void *opaque, Error **errp)
>
>And the same approach here, of course.
>
>> +static void throttle_group_set_limits(Object *obj, Visitor *v,
>> +                                      const char *name, void *opaque,
>> +                                      Error **errp)
>> +
>> +{
>> +    ThrottleGroup *tg = THROTTLE_GROUP(obj);
>> +    ThrottleConfig cfg;
>> +    ThrottleLimits *arg = NULL;
>> +    Error *local_err = NULL;
>> +
>> +    arg = g_new0(ThrottleLimits, 1);
>
>Do you need to allocate ThrottleLimits in the heap?

I thought you actually do because visit_type_ThrottleLimits() frees arg 
on error:
 
    if (err && visit_is_input(v)) {
        qapi_free_ThrottleLimits(*obj);
        *obj = NULL;
    }

but I see now it doesn't actually call g_free and only sets the pointer 
to NULL.  Is that supposed to prevent use of a stack pointer in the 
caller after error? I am a bit confused as to why. (This is the 
generated qapi-visit.c code but similar to other visitor functions)

I will change this back to

    ThrottleLimits arg = { 0 };
    ThrottleLimits *argp = &arg;
    visit_type_ThrottleLimits(v, name, &argp, &local_err);

>
>> +static void throttle_group_get_limits(Object *obj, Visitor *v,
>> +                                      const char *name, void *opaque,
>> +                                      Error **errp)
>> +{
>> +    ThrottleGroup *tg = THROTTLE_GROUP(obj);
>> +    ThrottleConfig cfg;
>> +    ThrottleLimits *arg = NULL;
>> +
>> +    qemu_mutex_lock(&tg->lock);
>> +    throttle_get_config(&tg->ts, &cfg);
>> +    qemu_mutex_unlock(&tg->lock);
>> +
>> +    arg = g_new0(ThrottleLimits, 1);
>> +    throttle_config_to_limits(&cfg, arg);
>> +
>> +    visit_type_ThrottleLimits(v, name, &arg, errp);
>> +    g_free(arg);
>
>Same question here.
>
>Berto
>
Alberto Garcia Aug. 21, 2017, 12:04 p.m. UTC | #3
On Sat 19 Aug 2017 09:08:59 AM CEST, Manos Pitsidianakis wrote:
>>> +    if (tg->name) {
>>> +        /* error if name is duplicate */
>>> +        QTAILQ_FOREACH(iter, &throttle_groups, list) {
>>> +            if (!g_strcmp0(tg->name, iter->name) && tg != iter) {
>>
>>I'm just nitpicking here :) but if you change this and put 'tg !=
>>iter' first you'll save one unnecessary string comparison.
>
> Only in the case where tg == iter, otherwise you have one unnecessary
> pointer comparison for every other group.

Right, although calling g_strcmp0() may be more expensive than doing all
the pointer comparisons? Anyway it probably doesn't matter much in the
end.

>>Out of the blue I can think of the following alternative:
>>
>>   - There's 6 different buckets (we have BucketType listing them)
>>
>>   - There's 3 values we can set in each bucket (max, avg,
>>     burst_length). For those we can have an internal enumeration
>>     (probably with one additional value for iops-size).
>>
>>   - In the 'properties' array, for each property we know its category
>>     (and I mean: avg, max, burst-lenght, iops-size) and the bucket
>>     where they belong.
>>
>>   - In throttle_group_set() the switch could be something like this:
>>
>>     switch (info->category) {
>>        case THROTTLE_VALUE_AVG:
>>           cfg->buckets[info->bkt_type].avg = value;
>>           break;
>>        case THROTTLE_VALUE_MAX:
>>           cfg->buckets[info->bkt_type].max = value;
>>           break;
>>        case THROTTLE_VALUE_BURST_LENGTH:
>>           /* Code here to check that value <= UINT_MAX */
>>           cfg->buckets[info->bkt_type].iops_length = value;
>>           break;
>>        case THROTTLE_VALUE_IOPS_SIZE:
>>           cfg->op_size = value;
>>     }
>
> I don't think that solves the type problem, since C uses coercion.  For 
> example if hypothetically a double changes to uint in the future, 
> `value` will not be checked for overflow and the compiler would just 
> convert it to uint implicitly.  An academic solution would be to use a 
> strongly typed language!
>>

Indeed, but I'd rather have this:

   unsigned int avg;
   double value = 2.5;
   avg = value;

than this:

   unsigned int avg;
   double value = 2.5;
   *((double *)&avg) = value;

>>> +static void throttle_group_set_limits(Object *obj, Visitor *v,
>>> +                                      const char *name, void *opaque,
>>> +                                      Error **errp)
>>> +
>>> +{
>>> +    ThrottleGroup *tg = THROTTLE_GROUP(obj);
>>> +    ThrottleConfig cfg;
>>> +    ThrottleLimits *arg = NULL;
>>> +    Error *local_err = NULL;
>>> +
>>> +    arg = g_new0(ThrottleLimits, 1);
>>
>>Do you need to allocate ThrottleLimits in the heap?
>
> I thought you actually do because visit_type_ThrottleLimits() frees arg 
> on error:
>  
>     if (err && visit_is_input(v)) {
>         qapi_free_ThrottleLimits(*obj);
>         *obj = NULL;
>     }
>
> but I see now it doesn't actually call g_free and only sets the pointer 
> to NULL.  Is that supposed to prevent use of a stack pointer in the 
> caller after error? I am a bit confused as to why. (This is the 
> generated qapi-visit.c code but similar to other visitor functions)

I'm not sure why it does that.

Berto
diff mbox

Patch

diff --git a/qapi/block-core.json b/qapi/block-core.json
index 833c602150..0bdc69aa5f 100644
--- a/qapi/block-core.json
+++ b/qapi/block-core.json
@@ -1905,6 +1905,54 @@ 
             '*iops_size': 'int', '*group': 'str' } }
 
 ##
+# @ThrottleLimits:
+#
+# Limit parameters for throttling.
+# Since some limit combinations are illegal, limits should always be set in one
+# transaction. All fields are optional. When setting limits, if a field is
+# missing the current value is not changed.
+#
+# @iops-total:             limit total I/O operations per second
+# @iops-total-max:         I/O operations burst
+# @iops-total-max-length:  length of the iops-total-max burst period, in seconds
+#                          It must only be set if @iops-total-max is set as well.
+# @iops-read:              limit read operations per second
+# @iops-read-max:          I/O operations read burst
+# @iops-read-max-length:   length of the iops-read-max burst period, in seconds
+#                          It must only be set if @iops-read-max is set as well.
+# @iops-write:             limit write operations per second
+# @iops-write-max:         I/O operations write burst
+# @iops-write-max-length:  length of the iops-write-max burst period, in seconds
+#                          It must only be set if @iops-write-max is set as well.
+# @bps-total:              limit total bytes per second
+# @bps-total-max:          total bytes burst
+# @bps-total-max-length:   length of the bps-total-max burst period, in seconds.
+#                          It must only be set if @bps-total-max is set as well.
+# @bps-read:               limit read bytes per second
+# @bps-read-max:           total bytes read burst
+# @bps-read-max-length:    length of the bps-read-max burst period, in seconds
+#                          It must only be set if @bps-read-max is set as well.
+# @bps-write:              limit write bytes per second
+# @bps-write-max:          total bytes write burst
+# @bps-write-max-length:   length of the bps-write-max burst period, in seconds
+#                          It must only be set if @bps-write-max is set as well.
+# @iops-size:              when limiting by iops max size of an I/O in bytes
+#
+# Since: 2.11
+##
+{ 'struct': 'ThrottleLimits',
+  'data': { '*iops-total' : 'int', '*iops-total-max' : 'int',
+            '*iops-total-max-length' : 'int', '*iops-read' : 'int',
+            '*iops-read-max' : 'int', '*iops-read-max-length' : 'int',
+            '*iops-write' : 'int', '*iops-write-max' : 'int',
+            '*iops-write-max-length' : 'int', '*bps-total' : 'int',
+            '*bps-total-max' : 'int', '*bps-total-max-length' : 'int',
+            '*bps-read' : 'int', '*bps-read-max' : 'int',
+            '*bps-read-max-length' : 'int', '*bps-write' : 'int',
+            '*bps-write-max' : 'int', '*bps-write-max-length' : 'int',
+            '*iops-size' : 'int' } }
+
+##
 # @block-stream:
 #
 # Copy data from a backing file into a block device.
diff --git a/include/block/throttle-groups.h b/include/block/throttle-groups.h
index a0f27cac63..82f030523f 100644
--- a/include/block/throttle-groups.h
+++ b/include/block/throttle-groups.h
@@ -53,6 +53,9 @@  typedef struct ThrottleGroupMember {
 
 } ThrottleGroupMember;
 
+#define TYPE_THROTTLE_GROUP "throttle-group"
+#define THROTTLE_GROUP(obj) OBJECT_CHECK(ThrottleGroup, (obj), TYPE_THROTTLE_GROUP)
+
 const char *throttle_group_get_name(ThrottleGroupMember *tgm);
 
 ThrottleState *throttle_group_incref(const char *name);
diff --git a/include/qemu/throttle-options.h b/include/qemu/throttle-options.h
index 3133d1ca40..182b7896e1 100644
--- a/include/qemu/throttle-options.h
+++ b/include/qemu/throttle-options.h
@@ -10,81 +10,102 @@ 
 #ifndef THROTTLE_OPTIONS_H
 #define THROTTLE_OPTIONS_H
 
+#define QEMU_OPT_IOPS_TOTAL "iops-total"
+#define QEMU_OPT_IOPS_TOTAL_MAX "iops-total-max"
+#define QEMU_OPT_IOPS_TOTAL_MAX_LENGTH "iops-total-max-length"
+#define QEMU_OPT_IOPS_READ "iops-read"
+#define QEMU_OPT_IOPS_READ_MAX "iops-read-max"
+#define QEMU_OPT_IOPS_READ_MAX_LENGTH "iops-read-max-length"
+#define QEMU_OPT_IOPS_WRITE "iops-write"
+#define QEMU_OPT_IOPS_WRITE_MAX "iops-write-max"
+#define QEMU_OPT_IOPS_WRITE_MAX_LENGTH "iops-write-max-length"
+#define QEMU_OPT_BPS_TOTAL "bps-total"
+#define QEMU_OPT_BPS_TOTAL_MAX "bps-total-max"
+#define QEMU_OPT_BPS_TOTAL_MAX_LENGTH "bps-total-max-length"
+#define QEMU_OPT_BPS_READ "bps-read"
+#define QEMU_OPT_BPS_READ_MAX "bps-read-max"
+#define QEMU_OPT_BPS_READ_MAX_LENGTH "bps-read-max-length"
+#define QEMU_OPT_BPS_WRITE "bps-write"
+#define QEMU_OPT_BPS_WRITE_MAX "bps-write-max"
+#define QEMU_OPT_BPS_WRITE_MAX_LENGTH "bps-write-max-length"
+#define QEMU_OPT_IOPS_SIZE "iops-size"
+
+#define THROTTLE_OPT_PREFIX "throttling."
 #define THROTTLE_OPTS \
           { \
-            .name = "throttling.iops-total",\
+            .name = THROTTLE_OPT_PREFIX QEMU_OPT_IOPS_TOTAL,\
             .type = QEMU_OPT_NUMBER,\
             .help = "limit total I/O operations per second",\
         },{ \
-            .name = "throttling.iops-read",\
+            .name = THROTTLE_OPT_PREFIX QEMU_OPT_IOPS_READ,\
             .type = QEMU_OPT_NUMBER,\
             .help = "limit read operations per second",\
         },{ \
-            .name = "throttling.iops-write",\
+            .name = THROTTLE_OPT_PREFIX QEMU_OPT_IOPS_WRITE,\
             .type = QEMU_OPT_NUMBER,\
             .help = "limit write operations per second",\
         },{ \
-            .name = "throttling.bps-total",\
+            .name = THROTTLE_OPT_PREFIX QEMU_OPT_BPS_TOTAL,\
             .type = QEMU_OPT_NUMBER,\
             .help = "limit total bytes per second",\
         },{ \
-            .name = "throttling.bps-read",\
+            .name = THROTTLE_OPT_PREFIX QEMU_OPT_BPS_READ,\
             .type = QEMU_OPT_NUMBER,\
             .help = "limit read bytes per second",\
         },{ \
-            .name = "throttling.bps-write",\
+            .name = THROTTLE_OPT_PREFIX QEMU_OPT_BPS_WRITE,\
             .type = QEMU_OPT_NUMBER,\
             .help = "limit write bytes per second",\
         },{ \
-            .name = "throttling.iops-total-max",\
+            .name = THROTTLE_OPT_PREFIX QEMU_OPT_IOPS_TOTAL_MAX,\
             .type = QEMU_OPT_NUMBER,\
             .help = "I/O operations burst",\
         },{ \
-            .name = "throttling.iops-read-max",\
+            .name = THROTTLE_OPT_PREFIX QEMU_OPT_IOPS_READ_MAX,\
             .type = QEMU_OPT_NUMBER,\
             .help = "I/O operations read burst",\
         },{ \
-            .name = "throttling.iops-write-max",\
+            .name = THROTTLE_OPT_PREFIX QEMU_OPT_IOPS_WRITE_MAX,\
             .type = QEMU_OPT_NUMBER,\
             .help = "I/O operations write burst",\
         },{ \
-            .name = "throttling.bps-total-max",\
+            .name = THROTTLE_OPT_PREFIX QEMU_OPT_BPS_TOTAL_MAX,\
             .type = QEMU_OPT_NUMBER,\
             .help = "total bytes burst",\
         },{ \
-            .name = "throttling.bps-read-max",\
+            .name = THROTTLE_OPT_PREFIX QEMU_OPT_BPS_READ_MAX,\
             .type = QEMU_OPT_NUMBER,\
             .help = "total bytes read burst",\
         },{ \
-            .name = "throttling.bps-write-max",\
+            .name = THROTTLE_OPT_PREFIX QEMU_OPT_BPS_WRITE_MAX,\
             .type = QEMU_OPT_NUMBER,\
             .help = "total bytes write burst",\
         },{ \
-            .name = "throttling.iops-total-max-length",\
+            .name = THROTTLE_OPT_PREFIX QEMU_OPT_IOPS_TOTAL_MAX_LENGTH,\
             .type = QEMU_OPT_NUMBER,\
             .help = "length of the iops-total-max burst period, in seconds",\
         },{ \
-            .name = "throttling.iops-read-max-length",\
+            .name = THROTTLE_OPT_PREFIX QEMU_OPT_IOPS_READ_MAX_LENGTH,\
             .type = QEMU_OPT_NUMBER,\
             .help = "length of the iops-read-max burst period, in seconds",\
         },{ \
-            .name = "throttling.iops-write-max-length",\
+            .name = THROTTLE_OPT_PREFIX QEMU_OPT_IOPS_WRITE_MAX_LENGTH,\
             .type = QEMU_OPT_NUMBER,\
             .help = "length of the iops-write-max burst period, in seconds",\
         },{ \
-            .name = "throttling.bps-total-max-length",\
+            .name = THROTTLE_OPT_PREFIX QEMU_OPT_BPS_TOTAL_MAX_LENGTH,\
             .type = QEMU_OPT_NUMBER,\
             .help = "length of the bps-total-max burst period, in seconds",\
         },{ \
-            .name = "throttling.bps-read-max-length",\
+            .name = THROTTLE_OPT_PREFIX QEMU_OPT_BPS_READ_MAX_LENGTH,\
             .type = QEMU_OPT_NUMBER,\
             .help = "length of the bps-read-max burst period, in seconds",\
         },{ \
-            .name = "throttling.bps-write-max-length",\
+            .name = THROTTLE_OPT_PREFIX QEMU_OPT_BPS_WRITE_MAX_LENGTH,\
             .type = QEMU_OPT_NUMBER,\
             .help = "length of the bps-write-max burst period, in seconds",\
         },{ \
-            .name = "throttling.iops-size",\
+            .name = THROTTLE_OPT_PREFIX QEMU_OPT_IOPS_SIZE,\
             .type = QEMU_OPT_NUMBER,\
             .help = "when limiting by iops max size of an I/O in bytes",\
         }
diff --git a/include/qemu/throttle.h b/include/qemu/throttle.h
index d056008c18..cb01e73d41 100644
--- a/include/qemu/throttle.h
+++ b/include/qemu/throttle.h
@@ -152,5 +152,8 @@  bool throttle_schedule_timer(ThrottleState *ts,
                              bool is_write);
 
 void throttle_account(ThrottleState *ts, bool is_write, uint64_t size);
+void throttle_limits_to_config(ThrottleLimits *arg, ThrottleConfig *cfg,
+                               Error **errp);
+void throttle_config_to_limits(ThrottleConfig *cfg, ThrottleLimits *var);
 
 #endif
diff --git a/block/throttle-groups.c b/block/throttle-groups.c
index 7749cf043f..5416a0d2e4 100644
--- a/block/throttle-groups.c
+++ b/block/throttle-groups.c
@@ -25,9 +25,17 @@ 
 #include "qemu/osdep.h"
 #include "sysemu/block-backend.h"
 #include "block/throttle-groups.h"
+#include "qemu/throttle-options.h"
 #include "qemu/queue.h"
 #include "qemu/thread.h"
 #include "sysemu/qtest.h"
+#include "qapi/error.h"
+#include "qapi-visit.h"
+#include "qom/object.h"
+#include "qom/object_interfaces.h"
+
+static void throttle_group_obj_init(Object *obj);
+static void throttle_group_obj_complete(UserCreatable *obj, Error **errp);
 
 /* The ThrottleGroup structure (with its ThrottleState) is shared
  * among different ThrottleGroupMembers and it's independent from
@@ -54,6 +62,10 @@ 
  * that ThrottleGroupMember has throttled requests in the queue.
  */
 typedef struct ThrottleGroup {
+    Object parent_obj;
+
+    /* refuse individual property change if initialization is complete */
+    bool is_initialized;
     char *name; /* This is constant during the lifetime of the group */
 
     QemuMutex lock; /* This lock protects the following four fields */
@@ -63,12 +75,11 @@  typedef struct ThrottleGroup {
     bool any_timer_armed[2];
     QEMUClockType clock_type;
 
-    /* These two are protected by the global throttle_groups_lock */
-    unsigned refcount;
+    /* This field is protected by the global QEMU mutex */
     QTAILQ_ENTRY(ThrottleGroup) list;
 } ThrottleGroup;
 
-static QemuMutex throttle_groups_lock;
+/* This is protected by the global QEMU mutex */
 static QTAILQ_HEAD(, ThrottleGroup) throttle_groups =
     QTAILQ_HEAD_INITIALIZER(throttle_groups);
 
@@ -77,7 +88,11 @@  static QTAILQ_HEAD(, ThrottleGroup) throttle_groups =
  * If no ThrottleGroup is found with the given name a new one is
  * created.
  *
- * @name: the name of the ThrottleGroup
+ * This function edits throttle_groups and must be called under the global
+ * mutex.
+ *
+ * @name: the name of the ThrottleGroup, NULL means a new anonymous group will
+ *        be created.
  * @ret:  the ThrottleState member of the ThrottleGroup
  */
 ThrottleState *throttle_group_incref(const char *name)
@@ -85,37 +100,26 @@  ThrottleState *throttle_group_incref(const char *name)
     ThrottleGroup *tg = NULL;
     ThrottleGroup *iter;
 
-    qemu_mutex_lock(&throttle_groups_lock);
-
-    /* Look for an existing group with that name */
-    QTAILQ_FOREACH(iter, &throttle_groups, list) {
-        if (!strcmp(name, iter->name)) {
-            tg = iter;
-            break;
+    if (name) {
+        /* Look for an existing group with that name */
+        QTAILQ_FOREACH(iter, &throttle_groups, list) {
+            if (!g_strcmp0(name, iter->name)) {
+                tg = iter;
+                break;
+            }
         }
     }
 
-    /* Create a new one if not found */
-    if (!tg) {
-        tg = g_new0(ThrottleGroup, 1);
+    if (tg) {
+        object_ref(OBJECT(tg));
+    } else {
+        /* Create a new one if not found */
+        /* new ThrottleGroup obj will have a refcnt = 1 */
+        tg = THROTTLE_GROUP(object_new(TYPE_THROTTLE_GROUP));
         tg->name = g_strdup(name);
-        tg->clock_type = QEMU_CLOCK_REALTIME;
-
-        if (qtest_enabled()) {
-            /* For testing block IO throttling only */
-            tg->clock_type = QEMU_CLOCK_VIRTUAL;
-        }
-        qemu_mutex_init(&tg->lock);
-        throttle_init(&tg->ts);
-        QLIST_INIT(&tg->head);
-
-        QTAILQ_INSERT_TAIL(&throttle_groups, tg, list);
+        throttle_group_obj_complete((UserCreatable *)tg, &error_abort);
     }
 
-    tg->refcount++;
-
-    qemu_mutex_unlock(&throttle_groups_lock);
-
     return &tg->ts;
 }
 
@@ -124,20 +128,15 @@  ThrottleState *throttle_group_incref(const char *name)
  * When the reference count reaches zero the ThrottleGroup is
  * destroyed.
  *
+ * This function edits throttle_groups and must be called under the global
+ * mutex.
+ *
  * @ts:  The ThrottleGroup to unref, given by its ThrottleState member
  */
 void throttle_group_unref(ThrottleState *ts)
 {
     ThrottleGroup *tg = container_of(ts, ThrottleGroup, ts);
-
-    qemu_mutex_lock(&throttle_groups_lock);
-    if (--tg->refcount == 0) {
-        QTAILQ_REMOVE(&throttle_groups, tg, list);
-        qemu_mutex_destroy(&tg->lock);
-        g_free(tg->name);
-        g_free(tg);
-    }
-    qemu_mutex_unlock(&throttle_groups_lock);
+    object_unref(OBJECT(tg));
 }
 
 /* Get the name from a ThrottleGroupMember's group. The name (and the pointer)
@@ -477,8 +476,11 @@  static void write_timer_cb(void *opaque)
  * its timers and updating its throttle_state pointer to point to it. If a
  * throttling group with that name does not exist yet, it will be created.
  *
+ * This function edits throttle_groups and must be called under the global
+ * mutex.
+ *
  * @tgm:       the ThrottleGroupMember to insert
- * @groupname: the name of the group
+ * @groupname: the name of the group. If NULL, an anonymous group is created.
  * @ctx:       the AioContext to use
  */
 void throttle_group_register_tgm(ThrottleGroupMember *tgm,
@@ -572,9 +574,346 @@  void throttle_group_detach_aio_context(ThrottleGroupMember *tgm)
     tgm->aio_context = NULL;
 }
 
+#undef THROTTLE_OPT_PREFIX
+#define THROTTLE_OPT_PREFIX "x-"
+#define DOUBLE 0
+#define UINT64 1
+#define UNSIGNED 2
+
+/* Helper struct and array for QOM property setter/getter */
+typedef struct {
+    const char *name;
+    BucketType type;
+    int data_type;
+    const ptrdiff_t offset; /* offset in LeakyBucket struct. */
+} ThrottleParamInfo;
+
+static ThrottleParamInfo properties[] = {
+{
+    THROTTLE_OPT_PREFIX QEMU_OPT_IOPS_TOTAL,
+    THROTTLE_OPS_TOTAL, DOUBLE, offsetof(LeakyBucket, avg),
+},
+{
+    THROTTLE_OPT_PREFIX QEMU_OPT_IOPS_TOTAL_MAX,
+    THROTTLE_OPS_TOTAL, DOUBLE, offsetof(LeakyBucket, max),
+},
+{
+    THROTTLE_OPT_PREFIX QEMU_OPT_IOPS_TOTAL_MAX_LENGTH,
+    THROTTLE_OPS_TOTAL, UNSIGNED, offsetof(LeakyBucket, burst_length),
+},
+{
+    THROTTLE_OPT_PREFIX QEMU_OPT_IOPS_READ,
+    THROTTLE_OPS_READ, DOUBLE, offsetof(LeakyBucket, avg),
+},
+{
+    THROTTLE_OPT_PREFIX QEMU_OPT_IOPS_READ_MAX,
+    THROTTLE_OPS_READ, DOUBLE, offsetof(LeakyBucket, max),
+},
+{
+    THROTTLE_OPT_PREFIX QEMU_OPT_IOPS_READ_MAX_LENGTH,
+    THROTTLE_OPS_READ, UNSIGNED, offsetof(LeakyBucket, burst_length),
+},
+{
+    THROTTLE_OPT_PREFIX QEMU_OPT_IOPS_WRITE,
+    THROTTLE_OPS_WRITE, DOUBLE, offsetof(LeakyBucket, avg),
+},
+{
+    THROTTLE_OPT_PREFIX QEMU_OPT_IOPS_WRITE_MAX,
+    THROTTLE_OPS_WRITE, DOUBLE, offsetof(LeakyBucket, max),
+},
+{
+    THROTTLE_OPT_PREFIX QEMU_OPT_IOPS_WRITE_MAX_LENGTH,
+    THROTTLE_OPS_WRITE, UNSIGNED, offsetof(LeakyBucket, burst_length),
+},
+{
+    THROTTLE_OPT_PREFIX QEMU_OPT_BPS_TOTAL,
+    THROTTLE_BPS_TOTAL, DOUBLE, offsetof(LeakyBucket, avg),
+},
+{
+    THROTTLE_OPT_PREFIX QEMU_OPT_BPS_TOTAL_MAX,
+    THROTTLE_BPS_TOTAL, DOUBLE, offsetof(LeakyBucket, max),
+},
+{
+    THROTTLE_OPT_PREFIX QEMU_OPT_BPS_TOTAL_MAX_LENGTH,
+    THROTTLE_BPS_TOTAL, UNSIGNED, offsetof(LeakyBucket, burst_length),
+},
+{
+    THROTTLE_OPT_PREFIX QEMU_OPT_BPS_READ,
+    THROTTLE_BPS_READ, DOUBLE, offsetof(LeakyBucket, avg),
+},
+{
+    THROTTLE_OPT_PREFIX QEMU_OPT_BPS_READ_MAX,
+    THROTTLE_BPS_READ, DOUBLE, offsetof(LeakyBucket, max),
+},
+{
+    THROTTLE_OPT_PREFIX QEMU_OPT_BPS_READ_MAX_LENGTH,
+    THROTTLE_BPS_READ, UNSIGNED, offsetof(LeakyBucket, burst_length),
+},
+{
+    THROTTLE_OPT_PREFIX QEMU_OPT_BPS_WRITE,
+    THROTTLE_BPS_WRITE, DOUBLE, offsetof(LeakyBucket, avg),
+},
+{
+    THROTTLE_OPT_PREFIX QEMU_OPT_BPS_WRITE_MAX,
+    THROTTLE_BPS_WRITE, DOUBLE, offsetof(LeakyBucket, max),
+},
+{
+    THROTTLE_OPT_PREFIX QEMU_OPT_BPS_WRITE_MAX_LENGTH,
+    THROTTLE_BPS_WRITE, UNSIGNED, offsetof(LeakyBucket, burst_length),
+},
+{
+    THROTTLE_OPT_PREFIX QEMU_OPT_IOPS_SIZE,
+    0, UINT64, offsetof(ThrottleConfig, op_size),
+}
+};
+
+/* This function edits throttle_groups and must be called under the global
+ * mutex */
+static void throttle_group_obj_init(Object *obj)
+{
+    ThrottleGroup *tg = THROTTLE_GROUP(obj);
+
+    tg->clock_type = QEMU_CLOCK_REALTIME;
+    if (qtest_enabled()) {
+        /* For testing block IO throttling only */
+        tg->clock_type = QEMU_CLOCK_VIRTUAL;
+    }
+    tg->is_initialized = false;
+    QTAILQ_INSERT_TAIL(&throttle_groups, tg, list);
+    qemu_mutex_init(&tg->lock);
+    throttle_init(&tg->ts);
+    QLIST_INIT(&tg->head);
+}
+
+/* This function edits throttle_groups and must be called under the global
+ * mutex */
+static void throttle_group_obj_complete(UserCreatable *obj, Error **errp)
+{
+    ThrottleGroup *tg = THROTTLE_GROUP(obj), *iter;
+    ThrottleConfig *cfg = &tg->ts.cfg;
+
+    /* set group name to object id if it exists */
+    if (!tg->name && tg->parent_obj.parent) {
+        tg->name = object_get_canonical_path_component(OBJECT(obj));
+    }
+
+    if (tg->name) {
+        /* error if name is duplicate */
+        QTAILQ_FOREACH(iter, &throttle_groups, list) {
+            if (!g_strcmp0(tg->name, iter->name) && tg != iter) {
+                error_setg(errp, "A group with this name already exists");
+                return;
+            }
+        }
+    }
+
+    /* unfix buckets to check validity */
+    throttle_get_config(&tg->ts, cfg);
+    if (!throttle_is_valid(cfg, errp)) {
+        return;
+    }
+    /* fix buckets again */
+    throttle_config(&tg->ts, tg->clock_type, cfg);
+
+    tg->is_initialized = true;
+}
+
+/* This function edits throttle_groups and must be called under the global
+ * mutex */
+static void throttle_group_obj_finalize(Object *obj)
+{
+    ThrottleGroup *tg = THROTTLE_GROUP(obj);
+    QTAILQ_REMOVE(&throttle_groups, tg, list);
+    qemu_mutex_destroy(&tg->lock);
+    g_free(tg->name);
+}
+
+static void throttle_group_set(Object *obj, Visitor *v, const char * name,
+                               void *opaque, Error **errp)
+
+{
+    ThrottleGroup *tg = THROTTLE_GROUP(obj);
+    ThrottleConfig cfg;
+    ThrottleParamInfo *info = opaque;
+    Error *local_err = NULL;
+    int64_t value;
+
+    /* If we have finished initialization, don't accept individual property
+     * changes through QOM. Throttle configuration limits must be set in one
+     * transaction, as certain combinations are invalid.
+     */
+    if (tg->is_initialized) {
+        error_setg(&local_err, "Property cannot be set after initialization");
+        goto ret;
+    }
+
+    visit_type_int64(v, name, &value, &local_err);
+    if (local_err) {
+        goto ret;
+    }
+    if (value < 0) {
+        error_setg(&local_err, "Property values cannot be negative");
+        goto ret;
+    }
+
+    cfg = tg->ts.cfg;
+    switch (info->data_type) {
+    case UINT64:
+        {
+            uint64_t *field = (void *)&cfg.buckets[info->type] + info->offset;
+            *field = value;
+        }
+        break;
+    case DOUBLE:
+        {
+            double *field = (void *)&cfg.buckets[info->type] + info->offset;
+            *field = value;
+        }
+        break;
+    case UNSIGNED:
+        {
+            if (value > UINT_MAX) {
+                error_setg(&local_err, "%s value must be in the"
+                                       "range [0, %u]", info->name, UINT_MAX);
+                goto ret;
+            }
+            unsigned *field = (void *)&cfg.buckets[info->type] + info->offset;
+            *field = value;
+        }
+    }
+
+    tg->ts.cfg = cfg;
+
+ret:
+    error_propagate(errp, local_err);
+    return;
+
+}
+
+static void throttle_group_get(Object *obj, Visitor *v, const char *name,
+                               void *opaque, Error **errp)
+{
+    ThrottleGroup *tg = THROTTLE_GROUP(obj);
+    ThrottleConfig cfg;
+    ThrottleParamInfo *info = opaque;
+    int64_t value;
+
+    cfg = tg->ts.cfg;
+    switch (info->data_type) {
+    case UINT64:
+        {
+            uint64_t *field = (void *)&cfg.buckets[info->type] + info->offset;
+            value = *field;
+        }
+        break;
+    case DOUBLE:
+        {
+            double *field = (void *)&cfg.buckets[info->type] + info->offset;
+            value = *field;
+        }
+        break;
+    case UNSIGNED:
+        {
+            unsigned *field = (void *)&cfg.buckets[info->type] + info->offset;
+            value = *field;
+        }
+    }
+
+    visit_type_int64(v, name, &value, errp);
+}
+
+static void throttle_group_set_limits(Object *obj, Visitor *v,
+                                      const char *name, void *opaque,
+                                      Error **errp)
+
+{
+    ThrottleGroup *tg = THROTTLE_GROUP(obj);
+    ThrottleConfig cfg;
+    ThrottleLimits *arg = NULL;
+    Error *local_err = NULL;
+
+    arg = g_new0(ThrottleLimits, 1);
+    visit_type_ThrottleLimits(v, name, &arg, &local_err);
+    if (local_err) {
+        goto ret;
+    }
+    qemu_mutex_lock(&tg->lock);
+    throttle_get_config(&tg->ts, &cfg);
+    throttle_limits_to_config(arg, &cfg, &local_err);
+    if (local_err) {
+        goto unlock;
+    }
+    throttle_config(&tg->ts, tg->clock_type, &cfg);
+
+unlock:
+    qemu_mutex_unlock(&tg->lock);
+ret:
+    g_free(arg);
+    error_propagate(errp, local_err);
+    return;
+}
+
+static void throttle_group_get_limits(Object *obj, Visitor *v,
+                                      const char *name, void *opaque,
+                                      Error **errp)
+{
+    ThrottleGroup *tg = THROTTLE_GROUP(obj);
+    ThrottleConfig cfg;
+    ThrottleLimits *arg = NULL;
+
+    qemu_mutex_lock(&tg->lock);
+    throttle_get_config(&tg->ts, &cfg);
+    qemu_mutex_unlock(&tg->lock);
+
+    arg = g_new0(ThrottleLimits, 1);
+    throttle_config_to_limits(&cfg, arg);
+
+    visit_type_ThrottleLimits(v, name, &arg, errp);
+    g_free(arg);
+}
+
+static void throttle_group_obj_class_init(ObjectClass *klass, void *class_data)
+{
+    size_t i = 0;
+    UserCreatableClass *ucc = USER_CREATABLE_CLASS(klass);
+
+    ucc->complete = throttle_group_obj_complete;
+    /* individual properties */
+    for (i = 0; i < sizeof(properties) / sizeof(ThrottleParamInfo); i++) {
+        object_class_property_add(klass,
+                                  properties[i].name,
+                                  "int",
+                                  throttle_group_get,
+                                  throttle_group_set,
+                                  NULL, &properties[i],
+                                  &error_abort);
+    }
+
+    /* ThrottleLimits */
+    object_class_property_add(klass,
+                              "limits", "ThrottleLimits",
+                              throttle_group_get_limits,
+                              throttle_group_set_limits,
+                              NULL, NULL,
+                              &error_abort);
+}
+
+static const TypeInfo throttle_group_info = {
+   .name = TYPE_THROTTLE_GROUP,
+   .parent = TYPE_OBJECT,
+   .class_init = throttle_group_obj_class_init,
+   .instance_size = sizeof(ThrottleGroup),
+   .instance_init = throttle_group_obj_init,
+   .instance_finalize = throttle_group_obj_finalize,
+   .interfaces = (InterfaceInfo[]) {
+       { TYPE_USER_CREATABLE },
+       { }
+   },
+};
+
 static void throttle_groups_init(void)
 {
-    qemu_mutex_init(&throttle_groups_lock);
+    type_register_static(&throttle_group_info);
 }
 
-block_init(throttle_groups_init);
+type_init(throttle_groups_init);
diff --git a/tests/test-throttle.c b/tests/test-throttle.c
index 57cf5ba711..0ea9093eee 100644
--- a/tests/test-throttle.c
+++ b/tests/test-throttle.c
@@ -662,6 +662,7 @@  int main(int argc, char **argv)
     qemu_init_main_loop(&error_fatal);
     ctx = qemu_get_aio_context();
     bdrv_init();
+    module_call_init(MODULE_INIT_QOM);
 
     do {} while (g_main_context_iteration(NULL, false));
 
diff --git a/util/throttle.c b/util/throttle.c
index b2a52b8b34..916f96c0b6 100644
--- a/util/throttle.c
+++ b/util/throttle.c
@@ -502,3 +502,154 @@  void throttle_account(ThrottleState *ts, bool is_write, uint64_t size)
     }
 }
 
+/* return a ThrottleConfig based on the options in a ThrottleLimits
+ *
+ * @arg:    the ThrottleLimits object to read from
+ * @cfg:    the ThrottleConfig to edit
+ * @errp:   error object
+ */
+void throttle_limits_to_config(ThrottleLimits *arg, ThrottleConfig *cfg,
+                               Error **errp)
+{
+    if (arg->has_bps_total) {
+        cfg->buckets[THROTTLE_BPS_TOTAL].avg = arg->bps_total;
+    }
+    if (arg->has_bps_read) {
+        cfg->buckets[THROTTLE_BPS_READ].avg  = arg->bps_read;
+    }
+    if (arg->has_bps_write) {
+        cfg->buckets[THROTTLE_BPS_WRITE].avg = arg->bps_write;
+    }
+
+    if (arg->has_iops_total) {
+        cfg->buckets[THROTTLE_OPS_TOTAL].avg = arg->iops_total;
+    }
+    if (arg->has_iops_read) {
+        cfg->buckets[THROTTLE_OPS_READ].avg  = arg->iops_read;
+    }
+    if (arg->has_iops_write) {
+        cfg->buckets[THROTTLE_OPS_WRITE].avg = arg->iops_write;
+    }
+
+    if (arg->has_bps_total_max) {
+        cfg->buckets[THROTTLE_BPS_TOTAL].max = arg->bps_total_max;
+    }
+    if (arg->has_bps_read_max) {
+        cfg->buckets[THROTTLE_BPS_READ].max = arg->bps_read_max;
+    }
+    if (arg->has_bps_write_max) {
+        cfg->buckets[THROTTLE_BPS_WRITE].max = arg->bps_write_max;
+    }
+    if (arg->has_iops_total_max) {
+        cfg->buckets[THROTTLE_OPS_TOTAL].max = arg->iops_total_max;
+    }
+    if (arg->has_iops_read_max) {
+        cfg->buckets[THROTTLE_OPS_READ].max = arg->iops_read_max;
+    }
+    if (arg->has_iops_write_max) {
+        cfg->buckets[THROTTLE_OPS_WRITE].max = arg->iops_write_max;
+    }
+
+    if (arg->has_bps_total_max_length) {
+        if (arg->bps_total_max_length > UINT_MAX) {
+            error_setg(errp, "bps-total-max-length value must be in"
+                    " the range [0, %u]", UINT_MAX);
+            return;
+        }
+        cfg->buckets[THROTTLE_BPS_TOTAL].burst_length = arg->bps_total_max_length;
+    }
+    if (arg->has_bps_read_max_length) {
+        if (arg->bps_read_max_length > UINT_MAX) {
+            error_setg(errp, "bps-read-max-length value must be in"
+                    " the range [0, %u]", UINT_MAX);
+            return;
+        }
+        cfg->buckets[THROTTLE_BPS_READ].burst_length = arg->bps_read_max_length;
+    }
+    if (arg->has_bps_write_max_length) {
+        if (arg->bps_write_max_length > UINT_MAX) {
+            error_setg(errp, "bps-write-max-length value must be in"
+                    " the range [0, %u]", UINT_MAX);
+            return;
+        }
+        cfg->buckets[THROTTLE_BPS_WRITE].burst_length = arg->bps_write_max_length;
+    }
+    if (arg->has_iops_total_max_length) {
+        if (arg->iops_total_max_length > UINT_MAX) {
+            error_setg(errp, "iops-total-max-length value must be in"
+                    " the range [0, %u]", UINT_MAX);
+            return;
+        }
+        cfg->buckets[THROTTLE_OPS_TOTAL].burst_length = arg->iops_total_max_length;
+    }
+    if (arg->has_iops_read_max_length) {
+        if (arg->iops_read_max_length > UINT_MAX) {
+            error_setg(errp, "iops-read-max-length value must be in"
+                    " the range [0, %u]", UINT_MAX);
+            return;
+        }
+        cfg->buckets[THROTTLE_OPS_READ].burst_length = arg->iops_read_max_length;
+    }
+    if (arg->has_iops_write_max_length) {
+        if (arg->iops_write_max_length > UINT_MAX) {
+            error_setg(errp, "iops-write-max-length value must be in"
+                    " the range [0, %u]", UINT_MAX);
+            return;
+        }
+        cfg->buckets[THROTTLE_OPS_WRITE].burst_length = arg->iops_write_max_length;
+    }
+
+    if (arg->has_iops_size) {
+        cfg->op_size = arg->iops_size;
+    }
+
+    throttle_is_valid(cfg, errp);
+}
+
+/* write the options of a ThrottleConfig to a ThrottleLimits
+ *
+ * @cfg:    the ThrottleConfig to read from
+ * @var:    the ThrottleLimits to write to
+ */
+void throttle_config_to_limits(ThrottleConfig *cfg, ThrottleLimits *var)
+{
+    var->bps_total               = cfg->buckets[THROTTLE_BPS_TOTAL].avg;
+    var->bps_read                = cfg->buckets[THROTTLE_BPS_READ].avg;
+    var->bps_write               = cfg->buckets[THROTTLE_BPS_WRITE].avg;
+    var->iops_total              = cfg->buckets[THROTTLE_OPS_TOTAL].avg;
+    var->iops_read               = cfg->buckets[THROTTLE_OPS_READ].avg;
+    var->iops_write              = cfg->buckets[THROTTLE_OPS_WRITE].avg;
+    var->bps_total_max           = cfg->buckets[THROTTLE_BPS_TOTAL].max;
+    var->bps_read_max            = cfg->buckets[THROTTLE_BPS_READ].max;
+    var->bps_write_max           = cfg->buckets[THROTTLE_BPS_WRITE].max;
+    var->iops_total_max          = cfg->buckets[THROTTLE_OPS_TOTAL].max;
+    var->iops_read_max           = cfg->buckets[THROTTLE_OPS_READ].max;
+    var->iops_write_max          = cfg->buckets[THROTTLE_OPS_WRITE].max;
+    var->bps_total_max_length    = cfg->buckets[THROTTLE_BPS_TOTAL].burst_length;
+    var->bps_read_max_length     = cfg->buckets[THROTTLE_BPS_READ].burst_length;
+    var->bps_write_max_length    = cfg->buckets[THROTTLE_BPS_WRITE].burst_length;
+    var->iops_total_max_length   = cfg->buckets[THROTTLE_OPS_TOTAL].burst_length;
+    var->iops_read_max_length    = cfg->buckets[THROTTLE_OPS_READ].burst_length;
+    var->iops_write_max_length   = cfg->buckets[THROTTLE_OPS_WRITE].burst_length;
+    var->iops_size               = cfg->op_size;
+
+    var->has_bps_total = true;
+    var->has_bps_read = true;
+    var->has_bps_write = true;
+    var->has_iops_total = true;
+    var->has_iops_read = true;
+    var->has_iops_write = true;
+    var->has_bps_total_max = true;
+    var->has_bps_read_max = true;
+    var->has_bps_write_max = true;
+    var->has_iops_total_max = true;
+    var->has_iops_read_max = true;
+    var->has_iops_write_max = true;
+    var->has_bps_read_max_length = true;
+    var->has_bps_total_max_length = true;
+    var->has_bps_write_max_length = true;
+    var->has_iops_total_max_length = true;
+    var->has_iops_read_max_length = true;
+    var->has_iops_write_max_length = true;
+    var->has_iops_size = true;
+}