diff mbox series

[03/99] ccid: Fix dwProtocols advertisement of T=0

Message ID 20180723201748.25573-4-mdroth@linux.vnet.ibm.com (mailing list archive)
State New, archived
Headers show
Series Patch Round-up for stable 2.12.1, freeze on 2018-07-30 | expand

Commit Message

Michael Roth July 23, 2018, 8:16 p.m. UTC 
From: Jason Andryuk <jandryuk@gmail.com>

Commit d7d218ef02d87c637d20d64da8f575d434ff6f78 attempted to change
dwProtocols to only advertise support for T=0 and not T=1.  The change
was incorrect as it changed 0x00000003 to 0x00010000.

lsusb -v in a linux guest shows:
"dwProtocols         65536  (Invalid values detected)", though the
smart card could still be accessed.  Windows 7 does not detect inserted
smart cards and logs the the following Error in the Event Logs:

    Source: Smart Card Service
    Event ID: 610
    Smart Card Reader 'QEMU QEMU USB CCID 0' rejected IOCTL SET_PROTOCOL:
    Incorrect function. If this error persists, your smart card or reader
    may not be functioning correctly

    Command Header: 03 00 00 00

Setting to 0x00000001 fixes the Windows issue.

Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Message-id: 20180420183219.20722-1-jandryuk@gmail.com
Cc: qemu-stable@nongnu.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit 0ee86bb6c5beb6498488850104f7557c376d0bef)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
---
 hw/usb/dev-smartcard-reader.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/hw/usb/dev-smartcard-reader.c b/hw/usb/dev-smartcard-reader.c
index e6468057a0..cabb564788 100644
--- a/hw/usb/dev-smartcard-reader.c
+++ b/hw/usb/dev-smartcard-reader.c
@@ -329,8 +329,8 @@  static const uint8_t qemu_ccid_descriptor[] = {
                      */
         0x07,       /* u8  bVoltageSupport; 01h - 5.0v, 02h - 3.0, 03 - 1.8 */
 
-        0x00, 0x00, /* u32 dwProtocols; RRRR PPPP. RRRR = 0000h.*/
-        0x01, 0x00, /* PPPP: 0001h = Protocol T=0, 0002h = Protocol T=1 */
+        0x01, 0x00, /* u32 dwProtocols; RRRR PPPP. RRRR = 0000h.*/
+        0x00, 0x00, /* PPPP: 0001h = Protocol T=0, 0002h = Protocol T=1 */
                     /* u32 dwDefaultClock; in kHZ (0x0fa0 is 4 MHz) */
         0xa0, 0x0f, 0x00, 0x00,
                     /* u32 dwMaximumClock; */