diff mbox series

[v2,1/2] hw/arm/xilinx_zynq: Use the ARRAY_SIZE macro

Message ID 20181030114048.21527-2-philmd@redhat.com (mailing list archive)
State New, archived
Headers show
Series hw/arm/exynos4: Add DMA support for SMDKC210 board | expand

Commit Message

Philippe Mathieu-Daudé Oct. 30, 2018, 11:40 a.m. UTC
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
---
 hw/arm/xilinx_zynq.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Peter Maydell Oct. 30, 2018, 2:07 p.m. UTC | #1
On 30 October 2018 at 11:40, Philippe Mathieu-Daudé <philmd@redhat.com> wrote:
> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
> ---
>  hw/arm/xilinx_zynq.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/hw/arm/xilinx_zynq.c b/hw/arm/xilinx_zynq.c
> index f1496d2927..57497b0c4d 100644
> --- a/hw/arm/xilinx_zynq.c
> +++ b/hw/arm/xilinx_zynq.c
> @@ -294,7 +294,7 @@ static void zynq_init(MachineState *machine)
>      busdev = SYS_BUS_DEVICE(dev);
>      sysbus_mmio_map(busdev, 0, 0xF8003000);
>      sysbus_connect_irq(busdev, 0, pic[45-IRQ_OFFSET]); /* abort irq line */
> -    for (n = 0; n < 8; ++n) { /* event irqs */
> +    for (n = 0; n < ARRAY_SIZE(dma_irqs); ++n) { /* event irqs */
>          sysbus_connect_irq(busdev, n + 1, pic[dma_irqs[n] - IRQ_OFFSET]);
>      }
>
> --
> 2.17.2

Since this isn't related to the other patch, I'll just apply
it to target-arm.next to save you carrying it around.


thanks
-- PMM
Philippe Mathieu-Daudé Oct. 30, 2018, 2:26 p.m. UTC | #2
On 30/10/18 15:07, Peter Maydell wrote:
> On 30 October 2018 at 11:40, Philippe Mathieu-Daudé <philmd@redhat.com> wrote:
>> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
>> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
>> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
>> ---
>>   hw/arm/xilinx_zynq.c | 2 +-
>>   1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/hw/arm/xilinx_zynq.c b/hw/arm/xilinx_zynq.c
>> index f1496d2927..57497b0c4d 100644
>> --- a/hw/arm/xilinx_zynq.c
>> +++ b/hw/arm/xilinx_zynq.c
>> @@ -294,7 +294,7 @@ static void zynq_init(MachineState *machine)
>>       busdev = SYS_BUS_DEVICE(dev);
>>       sysbus_mmio_map(busdev, 0, 0xF8003000);
>>       sysbus_connect_irq(busdev, 0, pic[45-IRQ_OFFSET]); /* abort irq line */
>> -    for (n = 0; n < 8; ++n) { /* event irqs */
>> +    for (n = 0; n < ARRAY_SIZE(dma_irqs); ++n) { /* event irqs */
>>           sysbus_connect_irq(busdev, n + 1, pic[dma_irqs[n] - IRQ_OFFSET]);
>>       }
>>
>> --
>> 2.17.2
> 
> Since this isn't related to the other patch, I'll just apply
> it to target-arm.next to save you carrying it around.

Thank you!
diff mbox series

Patch

diff --git a/hw/arm/xilinx_zynq.c b/hw/arm/xilinx_zynq.c
index f1496d2927..57497b0c4d 100644
--- a/hw/arm/xilinx_zynq.c
+++ b/hw/arm/xilinx_zynq.c
@@ -294,7 +294,7 @@  static void zynq_init(MachineState *machine)
     busdev = SYS_BUS_DEVICE(dev);
     sysbus_mmio_map(busdev, 0, 0xF8003000);
     sysbus_connect_irq(busdev, 0, pic[45-IRQ_OFFSET]); /* abort irq line */
-    for (n = 0; n < 8; ++n) { /* event irqs */
+    for (n = 0; n < ARRAY_SIZE(dma_irqs); ++n) { /* event irqs */
         sysbus_connect_irq(busdev, n + 1, pic[dma_irqs[n] - IRQ_OFFSET]);
     }