diff mbox series

[v3,05/20] Acceptance tests: introduce arch parameter and attribute

Message ID 20190221005753.27955-6-crosa@redhat.com (mailing list archive)
State New, archived
Headers show
Series Acceptance Tests: target architecture support | expand

Commit Message

Cleber Rosa Feb. 21, 2019, 12:57 a.m. UTC
It's useful to define the architecture that should be used in
situations such as:
 * the intended target of the QEMU binary to be used on tests
 * the architecture of code to be run within the QEMU binary, such
   as a kernel image or a full blown guest OS image

This commit introduces both a test parameter and a test instance
attribute, that will contain such a value.

Now, when the "arch" test parameter is given, it will influence the
selection of the default QEMU binary, if one is not given explicitly
by means of the "qemu_img" parameter.

Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
 docs/devel/testing.rst                    | 28 +++++++++++++++++++++++
 tests/acceptance/avocado_qemu/__init__.py | 14 +++++++++---
 2 files changed, 39 insertions(+), 3 deletions(-)

Comments

Cornelia Huck March 1, 2019, 10:27 a.m. UTC | #1
On Wed, 20 Feb 2019 19:57:38 -0500
Cleber Rosa <crosa@redhat.com> wrote:

> It's useful to define the architecture that should be used in
> situations such as:
>  * the intended target of the QEMU binary to be used on tests
>  * the architecture of code to be run within the QEMU binary, such
>    as a kernel image or a full blown guest OS image
> 
> This commit introduces both a test parameter and a test instance
> attribute, that will contain such a value.
> 
> Now, when the "arch" test parameter is given, it will influence the
> selection of the default QEMU binary, if one is not given explicitly
> by means of the "qemu_img" parameter.
> 
> Signed-off-by: Cleber Rosa <crosa@redhat.com>
> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
> ---
>  docs/devel/testing.rst                    | 28 +++++++++++++++++++++++
>  tests/acceptance/avocado_qemu/__init__.py | 14 +++++++++---
>  2 files changed, 39 insertions(+), 3 deletions(-)
> 
> diff --git a/docs/devel/testing.rst b/docs/devel/testing.rst
> index ceaaafc69f..6035db1b44 100644
> --- a/docs/devel/testing.rst
> +++ b/docs/devel/testing.rst
> @@ -689,6 +689,21 @@ vm
>  A QEMUMachine instance, initially configured according to the given
>  ``qemu_bin`` parameter.
>  
> +arch
> +~~~~
> +
> +The architecture can be used on different levels of the stack, e.g. by
> +the framework or by the test itself.  At the framework level, it will
> +will currently influence the selection of a QEMU binary (when one is

s/will will/will/

> +not explicitly given).
> +
> +Tests are also free to use this attribute value, for their own needs.
> +A test may, for instance, use the same value when selecting the
> +architecture of a kernel or disk image to boot a VM with.
> +
> +The ``arch`` attribute will be set to the test parameter of the same
> +name, and if one is not given explicitly, it will be set to ``None``.
> +
>  qemu_bin
>  ~~~~~~~~
>  
> @@ -711,6 +726,19 @@ like the following:
>  
>    PARAMS (key=qemu_bin, path=*, default=x86_64-softmmu/qemu-system-x86_64) => 'x86_64-softmmu/qemu-system-x86_64
>  
> +arch
> +~~~~
> +
> +The architecture that will influence the selection of a QEMU binary
> +(when one is not explicitly given).
> +
> +Tests are also free to use this parameter value, for their own needs.
> +A test may, for instance, use the same value when selecting the
> +architecture of a kernel or disk image to boot a VM with.
> +
> +This parameter has a direct relation with the ``arch`` attribute.  If
> +not given, it will default to None.
> +
>  qemu_bin
>  ~~~~~~~~
>  
> diff --git a/tests/acceptance/avocado_qemu/__init__.py b/tests/acceptance/avocado_qemu/__init__.py
> index d8d5b48dac..f580582602 100644
> --- a/tests/acceptance/avocado_qemu/__init__.py
> +++ b/tests/acceptance/avocado_qemu/__init__.py
> @@ -23,16 +23,22 @@ def is_readable_executable_file(path):
>      return os.path.isfile(path) and os.access(path, os.R_OK | os.X_OK)
>  
>  
> -def pick_default_qemu_bin():
> +def pick_default_qemu_bin(arch=None):
>      """
>      Picks the path of a QEMU binary, starting either in the current working
>      directory or in the source tree root directory.
>  
> +    :param arch: the arch to use when looking for a QEMU binary (the target
> +                 will match the arch given).  If None (the default) arch

s/None (the default)/None (the default),/ makes that sentence less
confusing :)

> +                 will be the current host system arch (as given by
> +                 :func:`os.uname`).
> +    :type arch: str
>      :returns: the path to the default QEMU binary or None if one could not
>                be found
>      :rtype: str or None
>      """
> -    arch = os.uname()[4]
> +    if arch is None:
> +        arch = os.uname()[4]
>      qemu_bin_relative_path = os.path.join("%s-softmmu" % arch,
>                                            "qemu-system-%s" % arch)
>      if is_readable_executable_file(qemu_bin_relative_path):
> @@ -47,8 +53,10 @@ def pick_default_qemu_bin():
>  class Test(avocado.Test):
>      def setUp(self):
>          self.vm = None
> +        self.arch = self.params.get('arch')
> +        default_qemu_bin = pick_default_qemu_bin(arch=self.arch)
>          self.qemu_bin = self.params.get('qemu_bin',
> -                                        default=pick_default_qemu_bin())
> +                                        default=default_qemu_bin)
>          if self.qemu_bin is None:
>              self.cancel("No QEMU binary defined or found in the source tree")
>          self.vm = QEMUMachine(self.qemu_bin)

Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Cleber Rosa March 11, 2019, 11:28 p.m. UTC | #2
On Fri, Mar 01, 2019 at 11:27:10AM +0100, Cornelia Huck wrote:
> On Wed, 20 Feb 2019 19:57:38 -0500
> Cleber Rosa <crosa@redhat.com> wrote:
> 
> > It's useful to define the architecture that should be used in
> > situations such as:
> >  * the intended target of the QEMU binary to be used on tests
> >  * the architecture of code to be run within the QEMU binary, such
> >    as a kernel image or a full blown guest OS image
> > 
> > This commit introduces both a test parameter and a test instance
> > attribute, that will contain such a value.
> > 
> > Now, when the "arch" test parameter is given, it will influence the
> > selection of the default QEMU binary, if one is not given explicitly
> > by means of the "qemu_img" parameter.
> > 
> > Signed-off-by: Cleber Rosa <crosa@redhat.com>
> > Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
> > ---
> >  docs/devel/testing.rst                    | 28 +++++++++++++++++++++++
> >  tests/acceptance/avocado_qemu/__init__.py | 14 +++++++++---
> >  2 files changed, 39 insertions(+), 3 deletions(-)
> > 
> > diff --git a/docs/devel/testing.rst b/docs/devel/testing.rst
> > index ceaaafc69f..6035db1b44 100644
> > --- a/docs/devel/testing.rst
> > +++ b/docs/devel/testing.rst
> > @@ -689,6 +689,21 @@ vm
> >  A QEMUMachine instance, initially configured according to the given
> >  ``qemu_bin`` parameter.
> >  
> > +arch
> > +~~~~
> > +
> > +The architecture can be used on different levels of the stack, e.g. by
> > +the framework or by the test itself.  At the framework level, it will
> > +will currently influence the selection of a QEMU binary (when one is
> 
> s/will will/will/

Thanks for spotting this!

> 
> > +not explicitly given).
> > +
> > +Tests are also free to use this attribute value, for their own needs.
> > +A test may, for instance, use the same value when selecting the
> > +architecture of a kernel or disk image to boot a VM with.
> > +
> > +The ``arch`` attribute will be set to the test parameter of the same
> > +name, and if one is not given explicitly, it will be set to ``None``.
> > +
> >  qemu_bin
> >  ~~~~~~~~
> >  
> > @@ -711,6 +726,19 @@ like the following:
> >  
> >    PARAMS (key=qemu_bin, path=*, default=x86_64-softmmu/qemu-system-x86_64) => 'x86_64-softmmu/qemu-system-x86_64
> >  
> > +arch
> > +~~~~
> > +
> > +The architecture that will influence the selection of a QEMU binary
> > +(when one is not explicitly given).
> > +
> > +Tests are also free to use this parameter value, for their own needs.
> > +A test may, for instance, use the same value when selecting the
> > +architecture of a kernel or disk image to boot a VM with.
> > +
> > +This parameter has a direct relation with the ``arch`` attribute.  If
> > +not given, it will default to None.
> > +
> >  qemu_bin
> >  ~~~~~~~~
> >  
> > diff --git a/tests/acceptance/avocado_qemu/__init__.py b/tests/acceptance/avocado_qemu/__init__.py
> > index d8d5b48dac..f580582602 100644
> > --- a/tests/acceptance/avocado_qemu/__init__.py
> > +++ b/tests/acceptance/avocado_qemu/__init__.py
> > @@ -23,16 +23,22 @@ def is_readable_executable_file(path):
> >      return os.path.isfile(path) and os.access(path, os.R_OK | os.X_OK)
> >  
> >  
> > -def pick_default_qemu_bin():
> > +def pick_default_qemu_bin(arch=None):
> >      """
> >      Picks the path of a QEMU binary, starting either in the current working
> >      directory or in the source tree root directory.
> >  
> > +    :param arch: the arch to use when looking for a QEMU binary (the target
> > +                 will match the arch given).  If None (the default) arch
> 
> s/None (the default)/None (the default),/ makes that sentence less
> confusing :)
> 

Good point, thanks!

- Cleber.
diff mbox series

Patch

diff --git a/docs/devel/testing.rst b/docs/devel/testing.rst
index ceaaafc69f..6035db1b44 100644
--- a/docs/devel/testing.rst
+++ b/docs/devel/testing.rst
@@ -689,6 +689,21 @@  vm
 A QEMUMachine instance, initially configured according to the given
 ``qemu_bin`` parameter.
 
+arch
+~~~~
+
+The architecture can be used on different levels of the stack, e.g. by
+the framework or by the test itself.  At the framework level, it will
+will currently influence the selection of a QEMU binary (when one is
+not explicitly given).
+
+Tests are also free to use this attribute value, for their own needs.
+A test may, for instance, use the same value when selecting the
+architecture of a kernel or disk image to boot a VM with.
+
+The ``arch`` attribute will be set to the test parameter of the same
+name, and if one is not given explicitly, it will be set to ``None``.
+
 qemu_bin
 ~~~~~~~~
 
@@ -711,6 +726,19 @@  like the following:
 
   PARAMS (key=qemu_bin, path=*, default=x86_64-softmmu/qemu-system-x86_64) => 'x86_64-softmmu/qemu-system-x86_64
 
+arch
+~~~~
+
+The architecture that will influence the selection of a QEMU binary
+(when one is not explicitly given).
+
+Tests are also free to use this parameter value, for their own needs.
+A test may, for instance, use the same value when selecting the
+architecture of a kernel or disk image to boot a VM with.
+
+This parameter has a direct relation with the ``arch`` attribute.  If
+not given, it will default to None.
+
 qemu_bin
 ~~~~~~~~
 
diff --git a/tests/acceptance/avocado_qemu/__init__.py b/tests/acceptance/avocado_qemu/__init__.py
index d8d5b48dac..f580582602 100644
--- a/tests/acceptance/avocado_qemu/__init__.py
+++ b/tests/acceptance/avocado_qemu/__init__.py
@@ -23,16 +23,22 @@  def is_readable_executable_file(path):
     return os.path.isfile(path) and os.access(path, os.R_OK | os.X_OK)
 
 
-def pick_default_qemu_bin():
+def pick_default_qemu_bin(arch=None):
     """
     Picks the path of a QEMU binary, starting either in the current working
     directory or in the source tree root directory.
 
+    :param arch: the arch to use when looking for a QEMU binary (the target
+                 will match the arch given).  If None (the default) arch
+                 will be the current host system arch (as given by
+                 :func:`os.uname`).
+    :type arch: str
     :returns: the path to the default QEMU binary or None if one could not
               be found
     :rtype: str or None
     """
-    arch = os.uname()[4]
+    if arch is None:
+        arch = os.uname()[4]
     qemu_bin_relative_path = os.path.join("%s-softmmu" % arch,
                                           "qemu-system-%s" % arch)
     if is_readable_executable_file(qemu_bin_relative_path):
@@ -47,8 +53,10 @@  def pick_default_qemu_bin():
 class Test(avocado.Test):
     def setUp(self):
         self.vm = None
+        self.arch = self.params.get('arch')
+        default_qemu_bin = pick_default_qemu_bin(arch=self.arch)
         self.qemu_bin = self.params.get('qemu_bin',
-                                        default=pick_default_qemu_bin())
+                                        default=default_qemu_bin)
         if self.qemu_bin is None:
             self.cancel("No QEMU binary defined or found in the source tree")
         self.vm = QEMUMachine(self.qemu_bin)