diff mbox series

[v10,10/13] Add rx-softmmu

Message ID 20190508145611.107133-11-ysato@users.sourceforge.jp (mailing list archive)
State New, archived
Headers show
Series Add RX archtecture support | expand

Commit Message

Yoshinori Sato May 8, 2019, 2:56 p.m. UTC
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
---
 configure                      | 8 ++++++++
 default-configs/rx-softmmu.mak | 7 +++++++
 include/sysemu/arch_init.h     | 1 +
 arch_init.c                    | 2 ++
 hw/Kconfig                     | 1 +
 5 files changed, 19 insertions(+)
 create mode 100644 default-configs/rx-softmmu.mak

Comments

Philippe Mathieu-Daudé May 8, 2019, 4:01 p.m. UTC | #1
On 5/8/19 4:56 PM, Yoshinori Sato wrote:
> Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
> ---
>  configure                      | 8 ++++++++
>  default-configs/rx-softmmu.mak | 7 +++++++
>  include/sysemu/arch_init.h     | 1 +
>  arch_init.c                    | 2 ++
>  hw/Kconfig                     | 1 +
>  5 files changed, 19 insertions(+)
>  create mode 100644 default-configs/rx-softmmu.mak
> 
> diff --git a/configure b/configure
> index 5b183c2e39..40132c5391 100755
> --- a/configure
> +++ b/configure
> @@ -7547,6 +7547,11 @@ case "$target_name" in
>      gdb_xml_files="riscv-64bit-cpu.xml riscv-64bit-fpu.xml riscv-64bit-csr.xml"
>      target_compiler=$cross_cc_riscv64
>    ;;
> +  rx)
> +    TARGET_ARCH=rx
> +    bflt="yes"
> +    target_compiler=$cross_cc_rx
> +  ;;
>    sh4|sh4eb)
>      TARGET_ARCH=sh4
>      bflt="yes"
> @@ -7767,6 +7772,9 @@ for i in $ARCH $TARGET_BASE_ARCH ; do
>    riscv*)
>      disas_config "RISCV"
>    ;;
> +  rx)
> +    disas_config "RX"
> +  ;;
>    s390*)
>      disas_config "S390"
>    ;;
> diff --git a/default-configs/rx-softmmu.mak b/default-configs/rx-softmmu.mak
> new file mode 100644
> index 0000000000..3f62f04e9b
> --- /dev/null
> +++ b/default-configs/rx-softmmu.mak
> @@ -0,0 +1,7 @@
> +# Default configuration for rx-softmmu
> +
> +CONFIG_SERIAL=y
> +CONFIG_RX=y
> +CONFIG_RENESAS_SCI=y
> +CONFIG_RENESAS_TMR=y
> +CONFIG_RENESAS_CMT=y

See previous patch comments, you should only use CONFIG_RX=y here.

Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>

Using only CONFIG_RX=y:
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>

> diff --git a/include/sysemu/arch_init.h b/include/sysemu/arch_init.h
> index 10cbafe970..3f4f844f7b 100644
> --- a/include/sysemu/arch_init.h
> +++ b/include/sysemu/arch_init.h
> @@ -25,6 +25,7 @@ enum {
>      QEMU_ARCH_NIOS2 = (1 << 17),
>      QEMU_ARCH_HPPA = (1 << 18),
>      QEMU_ARCH_RISCV = (1 << 19),
> +    QEMU_ARCH_RX = (1 << 20),
>  };
>  
>  extern const uint32_t arch_type;
> diff --git a/arch_init.c b/arch_init.c
> index f4f3f610c8..cc25ddd7ca 100644
> --- a/arch_init.c
> +++ b/arch_init.c
> @@ -74,6 +74,8 @@ int graphic_depth = 32;
>  #define QEMU_ARCH QEMU_ARCH_PPC
>  #elif defined(TARGET_RISCV)
>  #define QEMU_ARCH QEMU_ARCH_RISCV
> +#elif defined(TARGET_RX)
> +#define QEMU_ARCH QEMU_ARCH_RX
>  #elif defined(TARGET_S390X)
>  #define QEMU_ARCH QEMU_ARCH_S390X
>  #elif defined(TARGET_SH4)
> diff --git a/hw/Kconfig b/hw/Kconfig
> index 88b9f15007..63a071092e 100644
> --- a/hw/Kconfig
> +++ b/hw/Kconfig
> @@ -53,6 +53,7 @@ source nios2/Kconfig
>  source openrisc/Kconfig
>  source ppc/Kconfig
>  source riscv/Kconfig
> +source rx/Kconfig
>  source s390x/Kconfig
>  source sh4/Kconfig
>  source sparc/Kconfig
>
Richard Henderson May 8, 2019, 5:31 p.m. UTC | #2
On 5/8/19 7:56 AM, Yoshinori Sato wrote:
> Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
> ---
>  configure                      | 8 ++++++++
>  default-configs/rx-softmmu.mak | 7 +++++++
>  include/sysemu/arch_init.h     | 1 +
>  arch_init.c                    | 2 ++
>  hw/Kconfig                     | 1 +
>  5 files changed, 19 insertions(+)
>  create mode 100644 default-configs/rx-softmmu.mak

This patch must be last (aside from MAINTAINERS, which doesn't have code).

Otherwise,
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>


r~
diff mbox series

Patch

diff --git a/configure b/configure
index 5b183c2e39..40132c5391 100755
--- a/configure
+++ b/configure
@@ -7547,6 +7547,11 @@  case "$target_name" in
     gdb_xml_files="riscv-64bit-cpu.xml riscv-64bit-fpu.xml riscv-64bit-csr.xml"
     target_compiler=$cross_cc_riscv64
   ;;
+  rx)
+    TARGET_ARCH=rx
+    bflt="yes"
+    target_compiler=$cross_cc_rx
+  ;;
   sh4|sh4eb)
     TARGET_ARCH=sh4
     bflt="yes"
@@ -7767,6 +7772,9 @@  for i in $ARCH $TARGET_BASE_ARCH ; do
   riscv*)
     disas_config "RISCV"
   ;;
+  rx)
+    disas_config "RX"
+  ;;
   s390*)
     disas_config "S390"
   ;;
diff --git a/default-configs/rx-softmmu.mak b/default-configs/rx-softmmu.mak
new file mode 100644
index 0000000000..3f62f04e9b
--- /dev/null
+++ b/default-configs/rx-softmmu.mak
@@ -0,0 +1,7 @@ 
+# Default configuration for rx-softmmu
+
+CONFIG_SERIAL=y
+CONFIG_RX=y
+CONFIG_RENESAS_SCI=y
+CONFIG_RENESAS_TMR=y
+CONFIG_RENESAS_CMT=y
diff --git a/include/sysemu/arch_init.h b/include/sysemu/arch_init.h
index 10cbafe970..3f4f844f7b 100644
--- a/include/sysemu/arch_init.h
+++ b/include/sysemu/arch_init.h
@@ -25,6 +25,7 @@  enum {
     QEMU_ARCH_NIOS2 = (1 << 17),
     QEMU_ARCH_HPPA = (1 << 18),
     QEMU_ARCH_RISCV = (1 << 19),
+    QEMU_ARCH_RX = (1 << 20),
 };
 
 extern const uint32_t arch_type;
diff --git a/arch_init.c b/arch_init.c
index f4f3f610c8..cc25ddd7ca 100644
--- a/arch_init.c
+++ b/arch_init.c
@@ -74,6 +74,8 @@  int graphic_depth = 32;
 #define QEMU_ARCH QEMU_ARCH_PPC
 #elif defined(TARGET_RISCV)
 #define QEMU_ARCH QEMU_ARCH_RISCV
+#elif defined(TARGET_RX)
+#define QEMU_ARCH QEMU_ARCH_RX
 #elif defined(TARGET_S390X)
 #define QEMU_ARCH QEMU_ARCH_S390X
 #elif defined(TARGET_SH4)
diff --git a/hw/Kconfig b/hw/Kconfig
index 88b9f15007..63a071092e 100644
--- a/hw/Kconfig
+++ b/hw/Kconfig
@@ -53,6 +53,7 @@  source nios2/Kconfig
 source openrisc/Kconfig
 source ppc/Kconfig
 source riscv/Kconfig
+source rx/Kconfig
 source s390x/Kconfig
 source sh4/Kconfig
 source sparc/Kconfig