diff mbox series

[v6,8/8] hw/arm: Use GED for system_powerdown event

Message ID 20190625121421.22280-9-shameerali.kolothum.thodi@huawei.com (mailing list archive)
State New, archived
Headers show
Series ARM virt: ACPI memory hotplug support | expand

Commit Message

Shameerali Kolothum Thodi June 25, 2019, 12:14 p.m. UTC
Use GED for system_powerdown event instead of GPIO for ACPI.
Guest boot with DT still uses GPIO.

Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
---
 hw/arm/virt-acpi-build.c | 37 +------------------------------------
 hw/arm/virt.c            |  7 +++----
 2 files changed, 4 insertions(+), 40 deletions(-)
diff mbox series

Patch

diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
index 75657caa36..9178ca8e40 100644
--- a/hw/arm/virt-acpi-build.c
+++ b/hw/arm/virt-acpi-build.c
@@ -49,7 +49,6 @@ 
 #include "kvm_arm.h"
 
 #define ARM_SPI_BASE 32
-#define ACPI_POWER_BUTTON_DEVICE "PWRB"
 
 static void acpi_dsdt_add_cpus(Aml *scope, int smp_cpus)
 {
@@ -328,37 +327,6 @@  static void acpi_dsdt_add_pci(Aml *scope, const MemMapEntry *memmap,
     aml_append(scope, dev);
 }
 
-static void acpi_dsdt_add_gpio(Aml *scope, const MemMapEntry *gpio_memmap,
-                                           uint32_t gpio_irq)
-{
-    Aml *dev = aml_device("GPO0");
-    aml_append(dev, aml_name_decl("_HID", aml_string("ARMH0061")));
-    aml_append(dev, aml_name_decl("_ADR", aml_int(0)));
-    aml_append(dev, aml_name_decl("_UID", aml_int(0)));
-
-    Aml *crs = aml_resource_template();
-    aml_append(crs, aml_memory32_fixed(gpio_memmap->base, gpio_memmap->size,
-                                       AML_READ_WRITE));
-    aml_append(crs, aml_interrupt(AML_CONSUMER, AML_LEVEL, AML_ACTIVE_HIGH,
-                                  AML_EXCLUSIVE, &gpio_irq, 1));
-    aml_append(dev, aml_name_decl("_CRS", crs));
-
-    Aml *aei = aml_resource_template();
-    /* Pin 3 for power button */
-    const uint32_t pin_list[1] = {3};
-    aml_append(aei, aml_gpio_int(AML_CONSUMER, AML_EDGE, AML_ACTIVE_HIGH,
-                                 AML_EXCLUSIVE, AML_PULL_UP, 0, pin_list, 1,
-                                 "GPO0", NULL, 0));
-    aml_append(dev, aml_name_decl("_AEI", aei));
-
-    /* _E03 is handle for power button */
-    Aml *method = aml_method("_E03", 0, AML_NOTSERIALIZED);
-    aml_append(method, aml_notify(aml_name(ACPI_POWER_BUTTON_DEVICE),
-                                  aml_int(0x80)));
-    aml_append(dev, method);
-    aml_append(scope, dev);
-}
-
 static void acpi_dsdt_add_power_button(Aml *scope)
 {
     Aml *dev = aml_device(ACPI_POWER_BUTTON_DEVICE);
@@ -739,9 +707,8 @@  build_dsdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
                     (irqmap[VIRT_MMIO] + ARM_SPI_BASE), NUM_VIRTIO_TRANSPORTS);
     acpi_dsdt_add_pci(scope, memmap, (irqmap[VIRT_PCIE] + ARM_SPI_BASE),
                       vms->highmem, vms->highmem_ecam);
-    acpi_dsdt_add_gpio(scope, &memmap[VIRT_GPIO],
-                       (irqmap[VIRT_GPIO] + ARM_SPI_BASE));
     if (vms->acpi_dev) {
+        acpi_dsdt_add_power_button(scope);
         build_ged_aml(scope, "\\_SB."GED_DEVICE,
                       HOTPLUG_HANDLER(vms->acpi_dev),
                       irqmap[VIRT_ACPI_GED] + ARM_SPI_BASE, AML_SYSTEM_MEMORY);
@@ -752,8 +719,6 @@  build_dsdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
                                  AML_SYSTEM_MEMORY);
     }
 
-    acpi_dsdt_add_power_button(scope);
-
     aml_append(dsdt, scope);
 
     /* copy AML table into ACPI tables blob and patch header there */
diff --git a/hw/arm/virt.c b/hw/arm/virt.c
index 51173f6ce1..e6cef1e536 100644
--- a/hw/arm/virt.c
+++ b/hw/arm/virt.c
@@ -527,7 +527,7 @@  static inline DeviceState *create_acpi_ged(VirtMachineState *vms, qemu_irq *pic)
 {
     DeviceState *dev;
     int irq = vms->irqmap[VIRT_ACPI_GED];
-    uint32_t event = ACPI_GED_MEM_HOTPLUG_EVT;
+    uint32_t event = ACPI_GED_MEM_HOTPLUG_EVT | ACPI_GED_PWR_DOWN_EVT;
 
     dev = DEVICE(object_new(TYPE_ACPI_GED));
     qdev_prop_set_uint64(dev, "memhp-base",
@@ -1712,12 +1712,11 @@  static void machvirt_init(MachineState *machine)
 
     create_pcie(vms, pic);
 
-    create_gpio(vms, pic);
-
     if (aarch64 && firmware_loaded && acpi_enabled) {
         vms->acpi_dev = create_acpi_ged(vms, pic);
+    } else {
+        create_gpio(vms, pic);
     }
-
     /* Create mmio transports, so the user can create virtio backends
      * (which will be automatically plugged in to the transports). If
      * no backend is created the transport will just sit harmlessly idle.