diff mbox series

[05/17] aspeed/i2c: Add trace events

Message ID 20191119141211.25716-6-clg@kaod.org (mailing list archive)
State New, archived
Headers show
Series aspeed: extensions and fixes | expand

Commit Message

Cédric Le Goater Nov. 19, 2019, 2:11 p.m. UTC
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Tested-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
---
 hw/i2c/aspeed_i2c.c | 93 ++++++++++++++++++++++++++++++++++++++-------
 hw/i2c/trace-events |  9 +++++
 2 files changed, 89 insertions(+), 13 deletions(-)
diff mbox series

Patch

diff --git a/hw/i2c/aspeed_i2c.c b/hw/i2c/aspeed_i2c.c
index 030d9c56be65..2da04a4bff30 100644
--- a/hw/i2c/aspeed_i2c.c
+++ b/hw/i2c/aspeed_i2c.c
@@ -28,6 +28,7 @@ 
 #include "hw/i2c/aspeed_i2c.h"
 #include "hw/irq.h"
 #include "hw/qdev-properties.h"
+#include "trace.h"
 
 /* I2C Global Register */
 
@@ -158,6 +159,13 @@  static inline void aspeed_i2c_bus_raise_interrupt(AspeedI2CBus *bus)
 {
     AspeedI2CClass *aic = ASPEED_I2C_GET_CLASS(bus->controller);
 
+    trace_aspeed_i2c_bus_raise_interrupt(bus->intr_status,
+          bus->intr_status & I2CD_INTR_TX_NAK ? "nak|" : "",
+          bus->intr_status & I2CD_INTR_TX_ACK ? "ack|" : "",
+          bus->intr_status & I2CD_INTR_RX_DONE ? "done|" : "",
+          bus->intr_status & I2CD_INTR_NORMAL_STOP ? "normal|" : "",
+          bus->intr_status & I2CD_INTR_ABNORMAL ? "abnormal" : "");
+
     bus->intr_status &= bus->intr_ctrl;
     if (bus->intr_status) {
         bus->controller->intr_status |= 1 << bus->id;
@@ -170,41 +178,57 @@  static uint64_t aspeed_i2c_bus_read(void *opaque, hwaddr offset,
 {
     AspeedI2CBus *bus = opaque;
     AspeedI2CClass *aic = ASPEED_I2C_GET_CLASS(bus->controller);
+    uint64_t value = -1;
 
     switch (offset) {
     case I2CD_FUN_CTRL_REG:
-        return bus->ctrl;
+        value = bus->ctrl;
+        break;
     case I2CD_AC_TIMING_REG1:
-        return bus->timing[0];
+        value = bus->timing[0];
+        break;
     case I2CD_AC_TIMING_REG2:
-        return bus->timing[1];
+        value = bus->timing[1];
+        break;
     case I2CD_INTR_CTRL_REG:
-        return bus->intr_ctrl;
+        value = bus->intr_ctrl;
+        break;
     case I2CD_INTR_STS_REG:
-        return bus->intr_status;
+        value = bus->intr_status;
+        break;
     case I2CD_POOL_CTRL_REG:
-        return bus->pool_ctrl;
+        value = bus->pool_ctrl;
+        break;
     case I2CD_BYTE_BUF_REG:
-        return bus->buf;
+        value = bus->buf;
+        break;
     case I2CD_CMD_REG:
-        return bus->cmd | (i2c_bus_busy(bus->bus) << 16);
+        value = bus->cmd | (i2c_bus_busy(bus->bus) << 16);
+        break;
     case I2CD_DMA_ADDR:
         if (!aic->has_dma) {
             qemu_log_mask(LOG_GUEST_ERROR, "%s: No DMA support\n",  __func__);
-            return -1;
+            break;
         }
-        return bus->dma_addr;
+        value = bus->dma_addr;
+        break;
     case I2CD_DMA_LEN:
         if (!aic->has_dma) {
             qemu_log_mask(LOG_GUEST_ERROR, "%s: No DMA support\n",  __func__);
-            return -1;
+            break;
         }
-        return bus->dma_len;
+        value = bus->dma_len;
+        break;
+
     default:
         qemu_log_mask(LOG_GUEST_ERROR,
                       "%s: Bad offset 0x%" HWADDR_PRIx "\n", __func__, offset);
-        return -1;
+        value = -1;
+        break;
     }
+
+    trace_aspeed_i2c_bus_read(bus->id, offset, size, value);
+    return value;
 }
 
 static void aspeed_i2c_set_state(AspeedI2CBus *bus, uint8_t state)
@@ -246,6 +270,9 @@  static int aspeed_i2c_bus_send(AspeedI2CBus *bus, uint8_t pool_start)
         for (i = pool_start; i < I2CD_POOL_TX_COUNT(bus->pool_ctrl); i++) {
             uint8_t *pool_base = aic->bus_pool_base(bus);
 
+            trace_aspeed_i2c_bus_send("BUF", i + 1,
+                                      I2CD_POOL_TX_COUNT(bus->pool_ctrl),
+                                      pool_base[i]);
             ret = i2c_send(bus->bus, pool_base[i]);
             if (ret) {
                 break;
@@ -256,6 +283,7 @@  static int aspeed_i2c_bus_send(AspeedI2CBus *bus, uint8_t pool_start)
         while (bus->dma_len) {
             uint8_t data;
             aspeed_i2c_dma_read(bus, &data);
+            trace_aspeed_i2c_bus_send("DMA", bus->dma_len, bus->dma_len, data);
             ret = i2c_send(bus->bus, data);
             if (ret) {
                 break;
@@ -263,6 +291,7 @@  static int aspeed_i2c_bus_send(AspeedI2CBus *bus, uint8_t pool_start)
         }
         bus->cmd &= ~I2CD_TX_DMA_ENABLE;
     } else {
+        trace_aspeed_i2c_bus_send("BYTE", pool_start, 1, bus->buf);
         ret = i2c_send(bus->bus, bus->buf);
     }
 
@@ -281,6 +310,9 @@  static void aspeed_i2c_bus_recv(AspeedI2CBus *bus)
 
         for (i = 0; i < I2CD_POOL_RX_SIZE(bus->pool_ctrl); i++) {
             pool_base[i] = i2c_recv(bus->bus);
+            trace_aspeed_i2c_bus_recv("BUF", i + 1,
+                                      I2CD_POOL_RX_SIZE(bus->pool_ctrl),
+                                      pool_base[i]);
         }
 
         /* Update RX count */
@@ -294,6 +326,7 @@  static void aspeed_i2c_bus_recv(AspeedI2CBus *bus)
             MemTxResult result;
 
             data = i2c_recv(bus->bus);
+            trace_aspeed_i2c_bus_recv("DMA", bus->dma_len, bus->dma_len, data);
             result = address_space_write(&s->dram_as, bus->dma_addr,
                                          MEMTXATTRS_UNSPECIFIED, &data, 1);
             if (result != MEMTX_OK) {
@@ -307,6 +340,7 @@  static void aspeed_i2c_bus_recv(AspeedI2CBus *bus)
         bus->cmd &= ~I2CD_RX_DMA_ENABLE;
     } else {
         data = i2c_recv(bus->bus);
+        trace_aspeed_i2c_bus_recv("BYTE", 1, 1, bus->buf);
         bus->buf = (data & I2CD_BYTE_BUF_RX_MASK) << I2CD_BYTE_BUF_RX_SHIFT;
     }
 }
@@ -364,6 +398,33 @@  static bool aspeed_i2c_check_sram(AspeedI2CBus *bus)
     return true;
 }
 
+static void aspeed_i2c_bus_cmd_dump(AspeedI2CBus *bus)
+{
+    g_autofree char *cmd_flags;
+    uint32_t count;
+
+    if (bus->cmd & (I2CD_RX_BUFF_ENABLE | I2CD_RX_BUFF_ENABLE)) {
+        count = I2CD_POOL_TX_COUNT(bus->pool_ctrl);
+    } else if (bus->cmd & (I2CD_RX_DMA_ENABLE | I2CD_RX_DMA_ENABLE)) {
+        count = bus->dma_len;
+    } else { /* BYTE mode */
+        count = 1;
+    }
+
+    cmd_flags = g_strdup_printf("%s%s%s%s%s%s%s%s%s",
+                                bus->cmd & I2CD_M_START_CMD ? "start|" : "",
+                                bus->cmd & I2CD_RX_DMA_ENABLE ? "rxdma|" : "",
+                                bus->cmd & I2CD_TX_DMA_ENABLE ? "txdma|" : "",
+                                bus->cmd & I2CD_RX_BUFF_ENABLE ? "rxbuf|" : "",
+                                bus->cmd & I2CD_TX_BUFF_ENABLE ? "txbuf|" : "",
+                                bus->cmd & I2CD_M_TX_CMD ? "tx|" : "",
+                                bus->cmd & I2CD_M_RX_CMD ? "rx|" : "",
+                                bus->cmd & I2CD_M_S_RX_CMD_LAST ? "last|" : "",
+                                bus->cmd & I2CD_M_STOP_CMD ? "stop" : "");
+
+    trace_aspeed_i2c_bus_cmd(bus->cmd, cmd_flags, count, bus->intr_status);
+}
+
 /*
  * The state machine needs some refinement. It is only used to track
  * invalid STOP commands for the moment.
@@ -379,6 +440,10 @@  static void aspeed_i2c_bus_handle_cmd(AspeedI2CBus *bus, uint64_t value)
         return;
     }
 
+    if (trace_event_get_state_backends(TRACE_ASPEED_I2C_BUS_CMD)) {
+        aspeed_i2c_bus_cmd_dump(bus);
+    }
+
     if (bus->cmd & I2CD_M_START_CMD) {
         uint8_t state = aspeed_i2c_get_state(bus) & I2CD_MACTIVE ?
             I2CD_MSTARTR : I2CD_MSTART;
@@ -465,6 +530,8 @@  static void aspeed_i2c_bus_write(void *opaque, hwaddr offset,
     AspeedI2CClass *aic = ASPEED_I2C_GET_CLASS(bus->controller);
     bool handle_rx;
 
+    trace_aspeed_i2c_bus_write(bus->id, offset, size, value);
+
     switch (offset) {
     case I2CD_FUN_CTRL_REG:
         if (value & I2CD_SLAVE_EN) {
diff --git a/hw/i2c/trace-events b/hw/i2c/trace-events
index e1c810d5bd08..08db8fa68924 100644
--- a/hw/i2c/trace-events
+++ b/hw/i2c/trace-events
@@ -5,3 +5,12 @@ 
 i2c_event(const char *event, uint8_t address) "%s(addr:0x%02x)"
 i2c_send(uint8_t address, uint8_t data) "send(addr:0x%02x) data:0x%02x"
 i2c_recv(uint8_t address, uint8_t data) "recv(addr:0x%02x) data:0x%02x"
+
+# aspeed_i2c.c
+
+aspeed_i2c_bus_cmd(uint32_t cmd, const char *cmd_flags, uint32_t count, uint32_t intr_status) "handling cmd=0x%x %s count=%d intr=0x%x"
+aspeed_i2c_bus_raise_interrupt(uint32_t intr_status, const char *str1, const char *str2, const char *str3, const char *str4, const char *str5) "handled intr=0x%x %s%s%s%s%s"
+aspeed_i2c_bus_read(uint32_t busid, uint64_t offset, unsigned size, uint64_t value) "bus[%d]: To 0x%" PRIx64 " of size %u: 0x%" PRIx64
+aspeed_i2c_bus_write(uint32_t busid, uint64_t offset, unsigned size, uint64_t value) "bus[%d]: To 0x%" PRIx64 " of size %u: 0x%" PRIx64
+aspeed_i2c_bus_send(const char *mode, int i, int count, uint8_t byte) "%s send %d/%d 0x%02x"
+aspeed_i2c_bus_recv(const char *mode, int i, int count, uint8_t byte) "%s recv %d/%d 0x%02x"