| Message ID | 20200204095208.269131-8-k.jensen@samsung.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | nvme: support NVMe v1.3d, SGLs and multiple namespaces | expand |
On Tue, 2020-02-04 at 10:51 +0100, Klaus Jensen wrote: > Required for compliance with NVMe revision 1.2.1. See NVM Express 1.2.1, > Section 5.1 ("Abort command"). > > The Abort command is a best effort command; for now, the device always > fails to abort the given command. > > Signed-off-by: Klaus Jensen <klaus.jensen@cnexlabs.com> > --- > hw/block/nvme.c | 28 ++++++++++++++++++++++++++++ > 1 file changed, 28 insertions(+) > > diff --git a/hw/block/nvme.c b/hw/block/nvme.c > index ba5089df9ece..e1810260d40b 100644 > --- a/hw/block/nvme.c > +++ b/hw/block/nvme.c > @@ -731,6 +731,18 @@ static uint16_t nvme_identify(NvmeCtrl *n, NvmeCmd *cmd) > } > } > > +static uint16_t nvme_abort(NvmeCtrl *n, NvmeCmd *cmd, NvmeRequest *req) > +{ > + uint16_t sqid = le32_to_cpu(cmd->cdw10) & 0xffff; > + > + req->cqe.result = 1; > + if (nvme_check_sqid(n, sqid)) { > + return NVME_INVALID_FIELD | NVME_DNR; > + } > + > + return NVME_SUCCESS; > +} Looks 100% up to spec. In my nvme-mdev it looks like I implemented this wrongly by failing this with NVME_SC_ABORT_MISSING (which is defined in the kernel sources, but looks like a reserved error code in the spec. Not that it matters that much. Also unrelated to this but something I would like to point out (this applies not only to this command but to all admin and IO commands) the device should check for various reserved fields in the command descriptor, which it doesn't currently. This is what I do: https://gitlab.com/maximlevitsky/linux/blob/mdev-work-5.2/drivers/nvme/mdev/adm.c#L783 > + > static inline void nvme_set_timestamp(NvmeCtrl *n, uint64_t ts) > { > trace_nvme_dev_setfeat_timestamp(ts); > @@ -848,6 +860,7 @@ static uint16_t nvme_set_feature(NvmeCtrl *n, NvmeCmd *cmd, NvmeRequest *req) > trace_nvme_dev_err_invalid_setfeat(dw10); > return NVME_INVALID_FIELD | NVME_DNR; > } > + Nitpick: Unrelated whitespace change. > return NVME_SUCCESS; > } > > @@ -864,6 +877,8 @@ static uint16_t nvme_admin_cmd(NvmeCtrl *n, NvmeCmd *cmd, NvmeRequest *req) > return nvme_create_cq(n, cmd); > case NVME_ADM_CMD_IDENTIFY: > return nvme_identify(n, cmd); > + case NVME_ADM_CMD_ABORT: > + return nvme_abort(n, cmd, req); > case NVME_ADM_CMD_SET_FEATURES: > return nvme_set_feature(n, cmd, req); > case NVME_ADM_CMD_GET_FEATURES: > @@ -1377,6 +1392,19 @@ static void nvme_realize(PCIDevice *pci_dev, Error **errp) > id->ieee[2] = 0xb3; > id->ver = cpu_to_le32(NVME_SPEC_VER); > id->oacs = cpu_to_le16(0); > + > + /* > + * Because the controller always completes the Abort command immediately, > + * there can never be more than one concurrently executing Abort command, > + * so this value is never used for anything. Note that there can easily be > + * many Abort commands in the queues, but they are not considered > + * "executing" until processed by nvme_abort. > + * > + * The specification recommends a value of 3 for Abort Command Limit (four > + * concurrently outstanding Abort commands), so lets use that though it is > + * inconsequential. > + */ > + id->acl = 3; Yep. > id->frmw = 7 << 1; > id->lpa = 1 << 0; > id->sqes = (0x6 << 4) | 0x6; Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Best regards, Maxim Levitsky
diff --git a/hw/block/nvme.c b/hw/block/nvme.c index ba5089df9ece..e1810260d40b 100644 --- a/hw/block/nvme.c +++ b/hw/block/nvme.c @@ -731,6 +731,18 @@ static uint16_t nvme_identify(NvmeCtrl *n, NvmeCmd *cmd) } } +static uint16_t nvme_abort(NvmeCtrl *n, NvmeCmd *cmd, NvmeRequest *req) +{ + uint16_t sqid = le32_to_cpu(cmd->cdw10) & 0xffff; + + req->cqe.result = 1; + if (nvme_check_sqid(n, sqid)) { + return NVME_INVALID_FIELD | NVME_DNR; + } + + return NVME_SUCCESS; +} + static inline void nvme_set_timestamp(NvmeCtrl *n, uint64_t ts) { trace_nvme_dev_setfeat_timestamp(ts); @@ -848,6 +860,7 @@ static uint16_t nvme_set_feature(NvmeCtrl *n, NvmeCmd *cmd, NvmeRequest *req) trace_nvme_dev_err_invalid_setfeat(dw10); return NVME_INVALID_FIELD | NVME_DNR; } + return NVME_SUCCESS; } @@ -864,6 +877,8 @@ static uint16_t nvme_admin_cmd(NvmeCtrl *n, NvmeCmd *cmd, NvmeRequest *req) return nvme_create_cq(n, cmd); case NVME_ADM_CMD_IDENTIFY: return nvme_identify(n, cmd); + case NVME_ADM_CMD_ABORT: + return nvme_abort(n, cmd, req); case NVME_ADM_CMD_SET_FEATURES: return nvme_set_feature(n, cmd, req); case NVME_ADM_CMD_GET_FEATURES: @@ -1377,6 +1392,19 @@ static void nvme_realize(PCIDevice *pci_dev, Error **errp) id->ieee[2] = 0xb3; id->ver = cpu_to_le32(NVME_SPEC_VER); id->oacs = cpu_to_le16(0); + + /* + * Because the controller always completes the Abort command immediately, + * there can never be more than one concurrently executing Abort command, + * so this value is never used for anything. Note that there can easily be + * many Abort commands in the queues, but they are not considered + * "executing" until processed by nvme_abort. + * + * The specification recommends a value of 3 for Abort Command Limit (four + * concurrently outstanding Abort commands), so lets use that though it is + * inconsequential. + */ + id->acl = 3; id->frmw = 7 << 1; id->lpa = 1 << 0; id->sqes = (0x6 << 4) | 0x6;
Required for compliance with NVMe revision 1.2.1. See NVM Express 1.2.1, Section 5.1 ("Abort command"). The Abort command is a best effort command; for now, the device always fails to abort the given command. Signed-off-by: Klaus Jensen <klaus.jensen@cnexlabs.com> --- hw/block/nvme.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+)