diff mbox series

build: move TARGET_GPROF to config-host.mak

Message ID 20200204161104.21077-1-pbonzini@redhat.com (mailing list archive)
State New, archived
Headers show
Series build: move TARGET_GPROF to config-host.mak | expand

Commit Message

Paolo Bonzini Feb. 4, 2020, 4:11 p.m. UTC
TARGET_GPROF is the same for all targets, write it to
config-host.mak instead.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
 bsd-user/syscall.c   | 6 +++---
 configure            | 4 +++-
 linux-user/exit.c    | 4 ++--
 linux-user/signal.c  | 2 +-
 tests/check-block.sh | 2 +-
 5 files changed, 10 insertions(+), 8 deletions(-)

Comments

Marc-André Lureau Feb. 4, 2020, 4:41 p.m. UTC | #1
On Tue, Feb 4, 2020 at 5:11 PM Paolo Bonzini <pbonzini@redhat.com> wrote:
>
> TARGET_GPROF is the same for all targets, write it to
> config-host.mak instead.
>
> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>


> ---
>  bsd-user/syscall.c   | 6 +++---
>  configure            | 4 +++-
>  linux-user/exit.c    | 4 ++--
>  linux-user/signal.c  | 2 +-
>  tests/check-block.sh | 2 +-
>  5 files changed, 10 insertions(+), 8 deletions(-)
>
> diff --git a/bsd-user/syscall.c b/bsd-user/syscall.c
> index 0d45b654bb..d38ec7a162 100644
> --- a/bsd-user/syscall.c
> +++ b/bsd-user/syscall.c
> @@ -330,7 +330,7 @@ abi_long do_freebsd_syscall(void *cpu_env, int num, abi_long arg1,
>
>      switch(num) {
>      case TARGET_FREEBSD_NR_exit:
> -#ifdef TARGET_GPROF
> +#ifdef CONFIG_GPROF
>          _mcleanup();
>  #endif
>          gdb_exit(cpu_env, arg1);
> @@ -432,7 +432,7 @@ abi_long do_netbsd_syscall(void *cpu_env, int num, abi_long arg1,
>
>      switch(num) {
>      case TARGET_NETBSD_NR_exit:
> -#ifdef TARGET_GPROF
> +#ifdef CONFIG_GPROF
>          _mcleanup();
>  #endif
>          gdb_exit(cpu_env, arg1);
> @@ -511,7 +511,7 @@ abi_long do_openbsd_syscall(void *cpu_env, int num, abi_long arg1,
>
>      switch(num) {
>      case TARGET_OPENBSD_NR_exit:
> -#ifdef TARGET_GPROF
> +#ifdef CONFIG_GPROF
>          _mcleanup();
>  #endif
>          gdb_exit(cpu_env, arg1);
> diff --git a/configure b/configure
> index 5095f01728..08c28e73db 100755
> --- a/configure
> +++ b/configure
> @@ -6771,6 +6771,9 @@ fi
>  if test "$l2tpv3" = "yes" ; then
>    echo "CONFIG_L2TPV3=y" >> $config_host_mak
>  fi
> +if test "$gprof" = "yes" ; then
> +  echo "CONFIG_GPROF=y" >> $config_host_mak
> +fi
>  if test "$cap_ng" = "yes" ; then
>    echo "CONFIG_LIBCAP_NG=y" >> $config_host_mak
>  fi
> @@ -7951,7 +7954,6 @@ alpha)
>  esac
>
>  if test "$gprof" = "yes" ; then
> -  echo "TARGET_GPROF=y" >> $config_target_mak
>    if test "$target_linux_user" = "yes" ; then
>      cflags="-p $cflags"
>      ldflags="-p $ldflags"
> diff --git a/linux-user/exit.c b/linux-user/exit.c
> index a362ef67d2..1594015444 100644
> --- a/linux-user/exit.c
> +++ b/linux-user/exit.c
> @@ -18,7 +18,7 @@
>   */
>  #include "qemu/osdep.h"
>  #include "qemu.h"
> -#ifdef TARGET_GPROF
> +#ifdef CONFIG_GPROF
>  #include <sys/gmon.h>
>  #endif
>
> @@ -28,7 +28,7 @@ extern void __gcov_dump(void);
>
>  void preexit_cleanup(CPUArchState *env, int code)
>  {
> -#ifdef TARGET_GPROF
> +#ifdef CONFIG_GPROF
>          _mcleanup();
>  #endif
>  #ifdef CONFIG_GCOV
> diff --git a/linux-user/signal.c b/linux-user/signal.c
> index 5ca6d62b15..02f860ecb9 100644
> --- a/linux-user/signal.c
> +++ b/linux-user/signal.c
> @@ -509,7 +509,7 @@ void signal_init(void)
>      act.sa_flags = SA_SIGINFO;
>      act.sa_sigaction = host_signal_handler;
>      for(i = 1; i <= TARGET_NSIG; i++) {
> -#ifdef TARGET_GPROF
> +#ifdef CONFIG_GPROF
>          if (i == SIGPROF) {
>              continue;
>          }
> diff --git a/tests/check-block.sh b/tests/check-block.sh
> index 679aedec50..ad320c21ba 100755
> --- a/tests/check-block.sh
> +++ b/tests/check-block.sh
> @@ -16,7 +16,7 @@ if [ "$#" -ne 0 ]; then
>      format_list="$@"
>  fi
>
> -if grep -q "TARGET_GPROF=y" *-softmmu/config-target.mak 2>/dev/null ; then
> +if grep -q "CONFIG_GPROF=y" config-host.mak 2>/dev/null ; then
>      echo "GPROF is enabled ==> Not running the qemu-iotests."
>      exit 0
>  fi
> --
> 2.21.0
>
>
Philippe Mathieu-Daudé Feb. 4, 2020, 5:22 p.m. UTC | #2
On 2/4/20 5:11 PM, Paolo Bonzini wrote:
> TARGET_GPROF is the same for all targets, write it to
> config-host.mak instead.
> 
> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
> ---
>   bsd-user/syscall.c   | 6 +++---
>   configure            | 4 +++-
>   linux-user/exit.c    | 4 ++--
>   linux-user/signal.c  | 2 +-
>   tests/check-block.sh | 2 +-
>   5 files changed, 10 insertions(+), 8 deletions(-)
> 
> diff --git a/bsd-user/syscall.c b/bsd-user/syscall.c
> index 0d45b654bb..d38ec7a162 100644
> --- a/bsd-user/syscall.c
> +++ b/bsd-user/syscall.c
> @@ -330,7 +330,7 @@ abi_long do_freebsd_syscall(void *cpu_env, int num, abi_long arg1,
>   
>       switch(num) {
>       case TARGET_FREEBSD_NR_exit:
> -#ifdef TARGET_GPROF
> +#ifdef CONFIG_GPROF
>           _mcleanup();
>   #endif
>           gdb_exit(cpu_env, arg1);
> @@ -432,7 +432,7 @@ abi_long do_netbsd_syscall(void *cpu_env, int num, abi_long arg1,
>   
>       switch(num) {
>       case TARGET_NETBSD_NR_exit:
> -#ifdef TARGET_GPROF
> +#ifdef CONFIG_GPROF
>           _mcleanup();
>   #endif
>           gdb_exit(cpu_env, arg1);
> @@ -511,7 +511,7 @@ abi_long do_openbsd_syscall(void *cpu_env, int num, abi_long arg1,
>   
>       switch(num) {
>       case TARGET_OPENBSD_NR_exit:
> -#ifdef TARGET_GPROF
> +#ifdef CONFIG_GPROF
>           _mcleanup();
>   #endif
>           gdb_exit(cpu_env, arg1);
> diff --git a/configure b/configure
> index 5095f01728..08c28e73db 100755
> --- a/configure
> +++ b/configure
> @@ -6771,6 +6771,9 @@ fi
>   if test "$l2tpv3" = "yes" ; then
>     echo "CONFIG_L2TPV3=y" >> $config_host_mak
>   fi
> +if test "$gprof" = "yes" ; then
> +  echo "CONFIG_GPROF=y" >> $config_host_mak
> +fi
>   if test "$cap_ng" = "yes" ; then
>     echo "CONFIG_LIBCAP_NG=y" >> $config_host_mak
>   fi
> @@ -7951,7 +7954,6 @@ alpha)
>   esac
>   
>   if test "$gprof" = "yes" ; then
> -  echo "TARGET_GPROF=y" >> $config_target_mak
>     if test "$target_linux_user" = "yes" ; then
>       cflags="-p $cflags"
>       ldflags="-p $ldflags"
> diff --git a/linux-user/exit.c b/linux-user/exit.c
> index a362ef67d2..1594015444 100644
> --- a/linux-user/exit.c
> +++ b/linux-user/exit.c
> @@ -18,7 +18,7 @@
>    */
>   #include "qemu/osdep.h"
>   #include "qemu.h"
> -#ifdef TARGET_GPROF
> +#ifdef CONFIG_GPROF
>   #include <sys/gmon.h>
>   #endif
>   
> @@ -28,7 +28,7 @@ extern void __gcov_dump(void);
>   
>   void preexit_cleanup(CPUArchState *env, int code)
>   {
> -#ifdef TARGET_GPROF
> +#ifdef CONFIG_GPROF
>           _mcleanup();
>   #endif
>   #ifdef CONFIG_GCOV
> diff --git a/linux-user/signal.c b/linux-user/signal.c
> index 5ca6d62b15..02f860ecb9 100644
> --- a/linux-user/signal.c
> +++ b/linux-user/signal.c
> @@ -509,7 +509,7 @@ void signal_init(void)
>       act.sa_flags = SA_SIGINFO;
>       act.sa_sigaction = host_signal_handler;
>       for(i = 1; i <= TARGET_NSIG; i++) {
> -#ifdef TARGET_GPROF
> +#ifdef CONFIG_GPROF
>           if (i == SIGPROF) {
>               continue;
>           }
> diff --git a/tests/check-block.sh b/tests/check-block.sh
> index 679aedec50..ad320c21ba 100755
> --- a/tests/check-block.sh
> +++ b/tests/check-block.sh
> @@ -16,7 +16,7 @@ if [ "$#" -ne 0 ]; then
>       format_list="$@"
>   fi
>   
> -if grep -q "TARGET_GPROF=y" *-softmmu/config-target.mak 2>/dev/null ; then
> +if grep -q "CONFIG_GPROF=y" config-host.mak 2>/dev/null ; then
>       echo "GPROF is enabled ==> Not running the qemu-iotests."
>       exit 0
>   fi
> 

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Alex Bennée Feb. 4, 2020, 5:37 p.m. UTC | #3
Paolo Bonzini <pbonzini@redhat.com> writes:

> TARGET_GPROF is the same for all targets, write it to
> config-host.mak instead.
>
> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>

> ---
>  bsd-user/syscall.c   | 6 +++---
>  configure            | 4 +++-
>  linux-user/exit.c    | 4 ++--
>  linux-user/signal.c  | 2 +-
>  tests/check-block.sh | 2 +-
>  5 files changed, 10 insertions(+), 8 deletions(-)
>
> diff --git a/bsd-user/syscall.c b/bsd-user/syscall.c
> index 0d45b654bb..d38ec7a162 100644
> --- a/bsd-user/syscall.c
> +++ b/bsd-user/syscall.c
> @@ -330,7 +330,7 @@ abi_long do_freebsd_syscall(void *cpu_env, int num, abi_long arg1,
>  
>      switch(num) {
>      case TARGET_FREEBSD_NR_exit:
> -#ifdef TARGET_GPROF
> +#ifdef CONFIG_GPROF
>          _mcleanup();
>  #endif
>          gdb_exit(cpu_env, arg1);
> @@ -432,7 +432,7 @@ abi_long do_netbsd_syscall(void *cpu_env, int num, abi_long arg1,
>  
>      switch(num) {
>      case TARGET_NETBSD_NR_exit:
> -#ifdef TARGET_GPROF
> +#ifdef CONFIG_GPROF
>          _mcleanup();
>  #endif
>          gdb_exit(cpu_env, arg1);
> @@ -511,7 +511,7 @@ abi_long do_openbsd_syscall(void *cpu_env, int num, abi_long arg1,
>  
>      switch(num) {
>      case TARGET_OPENBSD_NR_exit:
> -#ifdef TARGET_GPROF
> +#ifdef CONFIG_GPROF
>          _mcleanup();
>  #endif
>          gdb_exit(cpu_env, arg1);
> diff --git a/configure b/configure
> index 5095f01728..08c28e73db 100755
> --- a/configure
> +++ b/configure
> @@ -6771,6 +6771,9 @@ fi
>  if test "$l2tpv3" = "yes" ; then
>    echo "CONFIG_L2TPV3=y" >> $config_host_mak
>  fi
> +if test "$gprof" = "yes" ; then
> +  echo "CONFIG_GPROF=y" >> $config_host_mak
> +fi
>  if test "$cap_ng" = "yes" ; then
>    echo "CONFIG_LIBCAP_NG=y" >> $config_host_mak
>  fi
> @@ -7951,7 +7954,6 @@ alpha)
>  esac
>  
>  if test "$gprof" = "yes" ; then
> -  echo "TARGET_GPROF=y" >> $config_target_mak
>    if test "$target_linux_user" = "yes" ; then
>      cflags="-p $cflags"
>      ldflags="-p $ldflags"
> diff --git a/linux-user/exit.c b/linux-user/exit.c
> index a362ef67d2..1594015444 100644
> --- a/linux-user/exit.c
> +++ b/linux-user/exit.c
> @@ -18,7 +18,7 @@
>   */
>  #include "qemu/osdep.h"
>  #include "qemu.h"
> -#ifdef TARGET_GPROF
> +#ifdef CONFIG_GPROF
>  #include <sys/gmon.h>
>  #endif
>  
> @@ -28,7 +28,7 @@ extern void __gcov_dump(void);
>  
>  void preexit_cleanup(CPUArchState *env, int code)
>  {
> -#ifdef TARGET_GPROF
> +#ifdef CONFIG_GPROF
>          _mcleanup();
>  #endif
>  #ifdef CONFIG_GCOV
> diff --git a/linux-user/signal.c b/linux-user/signal.c
> index 5ca6d62b15..02f860ecb9 100644
> --- a/linux-user/signal.c
> +++ b/linux-user/signal.c
> @@ -509,7 +509,7 @@ void signal_init(void)
>      act.sa_flags = SA_SIGINFO;
>      act.sa_sigaction = host_signal_handler;
>      for(i = 1; i <= TARGET_NSIG; i++) {
> -#ifdef TARGET_GPROF
> +#ifdef CONFIG_GPROF
>          if (i == SIGPROF) {
>              continue;
>          }
> diff --git a/tests/check-block.sh b/tests/check-block.sh
> index 679aedec50..ad320c21ba 100755
> --- a/tests/check-block.sh
> +++ b/tests/check-block.sh
> @@ -16,7 +16,7 @@ if [ "$#" -ne 0 ]; then
>      format_list="$@"
>  fi
>  
> -if grep -q "TARGET_GPROF=y" *-softmmu/config-target.mak 2>/dev/null ; then
> +if grep -q "CONFIG_GPROF=y" config-host.mak 2>/dev/null ; then
>      echo "GPROF is enabled ==> Not running the qemu-iotests."
>      exit 0
>  fi
diff mbox series

Patch

diff --git a/bsd-user/syscall.c b/bsd-user/syscall.c
index 0d45b654bb..d38ec7a162 100644
--- a/bsd-user/syscall.c
+++ b/bsd-user/syscall.c
@@ -330,7 +330,7 @@  abi_long do_freebsd_syscall(void *cpu_env, int num, abi_long arg1,
 
     switch(num) {
     case TARGET_FREEBSD_NR_exit:
-#ifdef TARGET_GPROF
+#ifdef CONFIG_GPROF
         _mcleanup();
 #endif
         gdb_exit(cpu_env, arg1);
@@ -432,7 +432,7 @@  abi_long do_netbsd_syscall(void *cpu_env, int num, abi_long arg1,
 
     switch(num) {
     case TARGET_NETBSD_NR_exit:
-#ifdef TARGET_GPROF
+#ifdef CONFIG_GPROF
         _mcleanup();
 #endif
         gdb_exit(cpu_env, arg1);
@@ -511,7 +511,7 @@  abi_long do_openbsd_syscall(void *cpu_env, int num, abi_long arg1,
 
     switch(num) {
     case TARGET_OPENBSD_NR_exit:
-#ifdef TARGET_GPROF
+#ifdef CONFIG_GPROF
         _mcleanup();
 #endif
         gdb_exit(cpu_env, arg1);
diff --git a/configure b/configure
index 5095f01728..08c28e73db 100755
--- a/configure
+++ b/configure
@@ -6771,6 +6771,9 @@  fi
 if test "$l2tpv3" = "yes" ; then
   echo "CONFIG_L2TPV3=y" >> $config_host_mak
 fi
+if test "$gprof" = "yes" ; then
+  echo "CONFIG_GPROF=y" >> $config_host_mak
+fi
 if test "$cap_ng" = "yes" ; then
   echo "CONFIG_LIBCAP_NG=y" >> $config_host_mak
 fi
@@ -7951,7 +7954,6 @@  alpha)
 esac
 
 if test "$gprof" = "yes" ; then
-  echo "TARGET_GPROF=y" >> $config_target_mak
   if test "$target_linux_user" = "yes" ; then
     cflags="-p $cflags"
     ldflags="-p $ldflags"
diff --git a/linux-user/exit.c b/linux-user/exit.c
index a362ef67d2..1594015444 100644
--- a/linux-user/exit.c
+++ b/linux-user/exit.c
@@ -18,7 +18,7 @@ 
  */
 #include "qemu/osdep.h"
 #include "qemu.h"
-#ifdef TARGET_GPROF
+#ifdef CONFIG_GPROF
 #include <sys/gmon.h>
 #endif
 
@@ -28,7 +28,7 @@  extern void __gcov_dump(void);
 
 void preexit_cleanup(CPUArchState *env, int code)
 {
-#ifdef TARGET_GPROF
+#ifdef CONFIG_GPROF
         _mcleanup();
 #endif
 #ifdef CONFIG_GCOV
diff --git a/linux-user/signal.c b/linux-user/signal.c
index 5ca6d62b15..02f860ecb9 100644
--- a/linux-user/signal.c
+++ b/linux-user/signal.c
@@ -509,7 +509,7 @@  void signal_init(void)
     act.sa_flags = SA_SIGINFO;
     act.sa_sigaction = host_signal_handler;
     for(i = 1; i <= TARGET_NSIG; i++) {
-#ifdef TARGET_GPROF
+#ifdef CONFIG_GPROF
         if (i == SIGPROF) {
             continue;
         }
diff --git a/tests/check-block.sh b/tests/check-block.sh
index 679aedec50..ad320c21ba 100755
--- a/tests/check-block.sh
+++ b/tests/check-block.sh
@@ -16,7 +16,7 @@  if [ "$#" -ne 0 ]; then
     format_list="$@"
 fi
 
-if grep -q "TARGET_GPROF=y" *-softmmu/config-target.mak 2>/dev/null ; then
+if grep -q "CONFIG_GPROF=y" config-host.mak 2>/dev/null ; then
     echo "GPROF is enabled ==> Not running the qemu-iotests."
     exit 0
 fi